GL Balances (New) - Extract Structure

Hi...
For datasource 0FI_GL_10
Extractor is FAGL_GET_TT_DATA_LEAD
Exctraction Structure is FAGL_EXTSTRUCT_LEAD
Upto this all is understood....
what i am confused about is.... in SAP help, it is mentioned that if the table FAGLFLEXT is the total table taken as basis, then the extraction structure FAGLFLEXB must already exist.
Please help me to understand where does FAGLFLEXB fit in the picture? What does it do?
Thank you.
Rgds,
Deepak

But Anil... if you refer to link :
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
what it mentions is as below :
If table FAGLFLEXT is the totals table taken as the basis, then the extraction structure (FAGLFLEXB) must already exist. If you want to use your own totals table as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. If you change your own totals table, you then have to regenerate the extraction structure and the DataSource. You also have to regenerate the DataSource if you use table FAGLFLECT and have changed it.
This is what confusing me....
Thanks for the reply Anil.... if possible pls can you make some more clarification on this ...

Similar Messages

Problem in populating the new field from the extract structure. Kindly help

my requirement a new text field is added on R/3 side and I have to populate
the same field into BW.
In the R/3 a new customization table 'AAA' is created which will have
code - char 3 and
text - char 30.
The code field is added to a table BBB.
The SAP standard generic data source exracts data from the table BBB where in the new code field have been added.
Now I can the see the code field in the extract structure and not in the data source as the filed has selection value 'A' when checked in the ROOSFIELD table.
To populate the value in BW, I will be creating a Generic Master Data text wherein I fetch the values from the table 'AAA' which the fields code and text and replicate the same in BW.
In the reporting level, the code InfoObject will be selected as display both KEY and TeXT, by doing I can populate the values of TEXT in the reporting.
But to achieve the same I need to add the field code in the ODS but cannot do the same because I am not able to see the field code in the data source.
Kindly let me know how to achieve the same.
Also let me know if there is any alternate solution to populate the text field in BW.
Any Inputs will be appreciated.
Thanks

> You should get the userdatasources bound to the
> columns and assign the values of the recordset to
> each one and after that use "setLineData" to write in
> the matrix.
>
> hope it helps
Hi all,
i have created tables (non BO Tables) directly on the SQL-server and want to use recordset to populate a user form matrix.
Is there any workaround to achieve this using non BO tables?
Please provide some sample code since it is a very urgent matter.
regards
Daniel

How to create a New Tranport Request for changed Extract structure

How to create a New Tranport Request for changed Extract structure ?
Hi Experts,
I have a FI AP Generic Datasource containing extract structure with appended fields.
It has already been activated and transported to Testing System.
Now, I am to create a new transport request for this DataSource and Extract structure.
I do not want to delete and recreate the Generic Datasource.
I am trying to look at the options in the extract structure top menu from where I can create a new Tranport Request.
Please let me know the steps
URGENT

Hi Dev,
Once you send the transport request for any data source from Dev to Testing you wont find that again in your Dev (I mean the TR). So, when you change anything for this data source or view now in Dev and try to save it, it will ask for a new transport request and here you can mention a new one starting from View then activate it and go to RSO2 regenerate it and use the same transport request for this too. When you transport this TR to Testing Environment the data source will automatically get changed.
Hope it helps...

Adding a new field in extract structure

Want to include New field in the Extract Structure in the Standard Extractor.
Please let me know what are the steps are needed to bring the data for that field in the cube level.
Thanks
Taj

Hi ,
if the data soource is belongs to LO extraction
Option 1- Enhance in LBWE
1. check in LBWE- Maintenance -> check if your required field is available in pool (right hand side).
2. If it is available then send it to left hand side.
3. Save and you will find the new field as part of your extract structure.
4. In LBWE go to datasource maintenance and uncheck the Hide check box for newly added fields and Save the data source.
5. No need to write user exit code for these fields.
after this replicate the data source
and activate the transfer rules using RS_TRANSTRU_ACTIVATE_ALL
Hope you are clear now!!!!!!!!
Cheers,
swapna.G

Changes in extract structure

Hello All,
The extract structure for 2lis_11_vaitm has been changed and since then whenever I try to execute the datasource using RSA3.
I get an error Import_mismatch_error.
The extractor was working fine in dev. So I collected one structure which was missing in quality.
After releasing the same in quality, I deleted the setup tables and did run RSA3 - I got 0 records.
As per the SAP note 328181 - the old Sales orders are not compatible with the new structure and so we get the same error.
If any new documents are posted they will come in RSA3. How do I make sure that in Production I dont miss any data?
Regards,
Nikekab

Hello Venkat,
I found one error description though:
Error when resetting DataSource 2LIS_11_VAITM OKQCLNT332 to the active version
Message no. RSO410
Diagnosis
Errors arose when activating DataSource 2LIS_11_VAITM. An active version already existed before theactivation.
System Response
DataSource 2LIS_11_VAITM could not be resetto the old active version. Since the generated objects no longer correspond to the old active version, they were reset to inactive.
Procedure
The old active version of DataSource 2LIS_11_VAITMcan no longer be used. Remove the cause ofthe activation error and activate DataSource 2LIS_11_VAITM anew.
Regards,
NIKEKAB

Error while saving Extract Structure

Hi Friends,
We have enhanced the DataSource 0FI_AR_4 by adding new feilds. After that i went to Extract Structure to Un check (Deselect) the HIDE check box for newly added feilds and when i save the structure it is throwing the Error The OLTP source still has errors. When i go to detail it is giving message .........
*The OLTP source still has errors
Message no. R8417*
I Have checked the Extract Structure it is in Active and For the newly added Key Figures there are referenced table and Feilds.
WHat Might be the reason.
How can Deselect the check boxes for newly added At Hide Feild in the Extract Structure and Save it.
Thanks & Regards
Anand

Hi,
Check similar kind of threads in SDN
Re: The OLTP source still has errors Message no. R8417
Re: Urgent ! Error while append structure for EISBE field
Generic extractor help needed badly.
Thanks
Reddy

BW FICA extract structures corrupted after upgrade from 4.6C to ECC6

Hi All. After the upgrade an include (FKKBWP) in the extract structure FKKOPBW_BASIC contained a field belonging to the APPEND structure ZAFKKOPBW_BASIC (originating from enhancing the configured structure). Also ZAFKKOPBW_BASIC is not visible in FKKOPBW_BASIC anymore, although when checking/activating the structure it complains about duplicate fields, which can only happen if ZAFKKOPBW_BASIC is still referenced. Furthermore, some new includes have also appeared in the extract, amongst others FKKOPBW_EVOLVED.
I have not been able to find any documentation regarding this. Two different systems were upgraded and the structures were corrupted in both systems in the same way, so this is not a fluke.
The application dumps when one tries to access it via SBIW->Settings for Application-Specific DataSources->Contract accounts receivable->Define Fields for the Extraction of Open Items, because the config and structures do not match.
All of this also applies to the Cleared Items as well.
Has anybody encountered this or can somebody point me to some documentation referering to this problem?
Regards,
Johan Loock

Hi
Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable. Hope this will resolve your issue.
Regards,
JB

How to copy exitsitng extracter into another new extracter?

Hello,
Please some one can tel me how to copy the existing extracter into another new extracter.
I have requirment as below
Currect me if i am wrong ,need to enhance the existing extracter and add some new fields,and need to include some masterdata filds also to it.
For master data i am going to do write routines at Transfermation so that no need to include in my exter for those filds to extracter.
Please some one guide me in this scenario.
Chrs

Hi,
you do not have to copy the extractor, you can enhance it with fields and fill them via enhancement coding --> rsa6.
If you want to copy it, you need to check what kind of extractor you have. Is it a function module or just a table extractor.
for fm: copy the function module via se37 and copy the extract structure via se11. Add your enhancements in the copied structures and coding. Create a new datasource with rso2.
for table extractor: create a view adding the additionally needed fields. create a new ds with rso2. Surely you need to add some coding in the relevant enhancement.
regards
Siggi

Transporting Extract Structures for Business Content Data Sources

Hi
We have added a new field to the 2lis_13_vditm data source and when i am trying to capture it in the transport, only the data source is getting captured and not the extract sturcture. When I go to the Object Entry Directory of the Extract Structure, it shows package as MCEX and person responsible as SAP. Should i need to change this and capture it in a transport or is it enough if i capture the data source alone
Thanks
Rashmi.

Hi,
If you transport the DS that should do it . The extract structure is standarad one and it would show as SAP, however you would have added the new filed using an append structure and if you go to the append structure and view the transport request you should be ble to see the transport request and your package in it.
P.S : if the Append structure is not under any transport req then check if it has already been transported
Cheers!!
Ashwin G

Selecting desired fields from extract structure to datasource in CRM

hi guys... coming back to this forum with new problem...
how are you guys...
i'm using ds 0CRM_SALES_ACT_1 in CRM to extract activities related data...
by standard this data source is not supplying some fields which i needed... but when i checked in 'roosfield' table and even in extract structure 'CRMT_BW_DS_ACTIVITY' it is showing the those fields which i required...
how can i get these fields to data source...
in LO its like...we can select required field from extract sturcture right???
is there any procedure do same with CRM data sources...
thnaking you...
regards...
nithin
Message was edited by: nith l

Hi,
If the fields are available in ES but not available in DS , then we can Modify the table ROOSFIELD. But, I think, this is some what rude mothod.
Before doing this, It is better to Raise a OSS. They may come out with some SP upgradation.
Search this forum with ROOSFIELD.
With rgds,
Anil Kumar Sharma .P

Do we need to fill setup table if we change extract structure of D/S

Hello Experts,
as we are in need of adding new filed to existing delta enable Datasources.
Do we need to fill the setup table if we change the Extract structure of Data source which is already loading Delta data to bw system?
case 1) we are planning to add new field directly in maintain structure in TCode LBWE.
case 2) adding new field to Extract structure and writing relavent code in CMOD.
Thanks in advance
Regards
Ravi

Hello Ravi,
If you are adding new field to a structure, even though you do not need historical data in the new fields it is a mandate that you have to replicate the datasource and then reinitialize the datasource, in both the cases you have mentioned. The reason for this is, the RSA7 contains your existing structure, as you are changing it, a new replica needs to be created in RSA7. You have to run a INIT without datatransfer, dont need to refill the setup tables for the INIT without data transfer.
After you activate the new fields and poppulate it using CMOD. First transfer all the records in SMQ1 to RSA7, using a V3 update. Then run a delta in BW, by this way you will load all the existing records from source system to BW. Then replicate the datasource and create the required InfoObject and mapping in BW (Please note that without deleting data, you wont be able to change the DataTarget structure unless you are using remodelling in BI 7.0). Delete the datasource entry in RSA7. Runa INIT without datatransfer.
Please let me know if you need any more information.
Regards,
Pankaj

Adding one more field in extract structure maintenance

Hi Gurus,
I have already extarcted data to BW using 2LIs_13_Vditm datasource and the deltas are also loaded.
Initially when the extract structure(in LBWE) was maintained in LBWE, the field KTGRM-Acct.Assgnmt group was not selected from the POOL.Now there is a requirement to include that in the maintenance of extract structure.
My question is, can i directly add the field to the datasource in R/3,without any coding in CMOD like in enhancements, and replicate again to BW without disturbing the existing data? OR Do I have to add the field in Trans.Stru, Update rules and cube and goahead loading data.
Thanks in advance.
Regards,
Satya

You can add any field listed in the pool of available fields directly to your LO datasource without enhancing the extract structure and coding in CMOD. But be aware to empty the delta queue and the extraction queue before, otherwise you can't change the extract structure.
After replicating the changed datasource you have to update the relevant infoproviders, update rules and the infosource, because the new field was not known before.
It is also recommended to reload the data from the source system in order to populate the new field for all data.

Invalid Extract Structure while creating a datasource

Hello,
I'm creating a datasource from a view. whenever i try to save it, it gives me an error saying that it is an invalid extract structure and that one of my fields is referenced to another table. After the threads on SDN, I think I need to remove this field from the view, activate my datasource, append my extract structure by adding the problem field and write an user exit to populate the field.
I don't have any experience in writing an user exit. I would appreciate if anyone would guide in it. Here are the details of my view:
View with 4 tables: EKBE, EKKO, EKPO AND EKKN
so that i'll get the line items of the purchase orders with the fields that i need. I didn't see any business content datasource for this.
problem field: DMBTR in EKBE table
this is referenced to T001.
How do i add this field in the extract structure and how do I write an user exit for this?
Regards,
Sam

Hi,
I am new to this foroum and BW module....
I too am facing the same problem.
I am creating a view from 2 tables VBAK and VBAP .
I was having problem with currency fields NETWR, WAERK, NETPR. So i removed the currency fields. Still i am having same error of not being able to create my data source from the view i have made. It gives the error....
Invalid extract structure template Z76_VEW_VBAK_VBP of DataSource Z76_DS_VIEW_VBAK_VBAP
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure Z76_VEW_VBAK_VBP. This operation failed, because the template structure quantity fields or currency fields, for example, field NETPR refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissable fields.
Can anyone help me out please.
Thnaks
Mansi

Extract Structure automatically defined in RSO2 - Is it possible to change?

Hello,
I had a CRM extractor that had in the RSO2 the table ZBW_COMPLAINTS and a structure called ZBW_S_COMPLAINTS. It was created by another person. When I went to this extractor to add some new fields and saved the extractor in RSO2 it changed the name of the extract structure from ZBW_S_COMPLAINTS to some name like Z0CDR00130. Now I want to make it refers to ZBW_S_COMPLAINTS as it was originally. Do you know how to do this?
Additional info: Some fields of this extractor are populated using CMOD
Thanks & Regards,
Adriana Oliveira

Hello,
I have authorization SAP_ALL and access key. I will change my question.
In quality, I have a datasoure that is based in a view. This view is populated by a program. In the RSO2, there is the view name and in the structure field the structure name is not the automatic one that is generated, it is a Z structure name that has more fields than the table view. The additional fields in the structure are populated using ABAP in CMOD.
Now I want to some changes I have done in DEV, specially the one that changed the structure name from the ZBW_S_STRUCTURE to another one that is automatically generated, but it was not possible using version management and I do not have reverse transport. Do you know another option?
Thanks & Regards,
Adriana Oliveira

Error in creating New Data Structures

Hi Gurus,
I tried creating new data structure in the R3 server using RSO2. I was planning to use the Purchasing Table (EKBE). But when I tried saving the structure this error occured/showed.
Invalid Extract sturcture template EKBE of Datasource MM_EKBE
Diagnosis:
You have tried to generate an extract structure with template structure EKBE. This was not successful, because the template structure references quantity or currency fields, for example the field name MENGE from another table.
Procedure:
Generate a view or a DDIC structure based on the template structure, which does not contain the unstupported fields.
- I have no idea what the problem is and what i should do based on the procedure. If anyone can help it would be much appreciated. Thank you in advance
- KIT

Hi Kristian,
The table EKBE has quantity and currency field refernceing field from other table to define them.
You need to include these refenced filed in the structure you add in the data source as the template.
To do this create a custom dictionary object view.
In the view include the refernce currency and quantity field from the reference table.
Also create a join between EKBE and the refernece table using the data elements that are the same.
For example, for quantity key figures in EKBE the unit of measure would be sourced by menge from MARA.
So you need to have table MARA included in the view.
The join would be on the material in EKBE and material in MARA.
You will find reference quantity and currency tab in the table definition in the Reference currency/quantity tab in the table definition.
You need to do this for all your quantity and currency references.
Once that is done use the ZVIEW to create your data source.
Hope it helps,
Best regards,
Sunmit.

GL Balances (New) - Extract Structure

Similar Messages

Maybe you are looking for