GL Description in Line item report FAGLL03

Hi All,
How can we polulate GL Description in Line item report FAGLL03? It looks like applying sap note 368310 could be an option (i am not sure) but is there a way to customize
Thanks
Ron

Hi Ravi,
We don't have do anything in the Header rows. This transaction will help us to insert any description on the header rowa. But what we are looking at is to polulate the GL account description along with the GL account number. Now we are only getting the GL account number in the line items and not the Gl account description along with it
Thanks
Ron
Edited by: Ron on Dec 2, 2009 11:46 PM

Similar Messages

Add cost centre name field or description in line item reports

Dear all,
How can the cost centre name or description be added in a report's lines (i.e. FBL1N). These fields (columns) are not included in the reports and need to add them. I have tried through special fields to include them but the table CSKSZ and fields KTEXT (Cost Centre name) and LTEXT (Cost centre description) are not included.
Regards,
George

Hello,
You must use business transaction event 1650 for adding special field to FBL*N reports.
Please refer OSS note below.
Note 984305 - Line item: Definition of special fields (T021S)
I hope it helps to you.
Regards,
Burak

No line item display in FAGLL03 & FBL3N GL line Item reports

Dear All,
I have parked the customer invoices with normal customer recon account and with special GL indicators. The system do not display parked lines for Special GL indicators. How can i display the line item display information in FAGLL03 and in FBL3n report.
Following settings have already been made are;
1. Fs00 = line item display check is on.
2. In initial screen for FAGLL03 & FBL3N Selection: Parked Items Parked items are displayed and checked.
The only information for parked special gl line items is get through FBL5N report only.
Kindly suggest in there any way that we can get report from GL line Item reports???
Regards

Some how client do not want the functionality

Vendor line item report based on profit centre wise like FAGLL03

We have profit centre wise GL Line item report i.e FAGLL03. Is there any such report for vendor line items with profit centre.
I want to see open items of vendor for a particular profit centre.

Hi BSR,
I think there are some 'recherche' reports which should fulfill your needs.
Please call the transaction FGI0.
There you got the following folders.
002 Payables According to General Ledger Account Assignments
0SAPPAYABL01 Payables per Profit Center
0SAPPAYABL02 Payables per Segment
003 Receivables According to General Ledger Account Assignments
0SAPRECIEV01 Receivables per Profit Center
0SAPRECIEV02 Receivables per Segment
These reports should fulfill the need, to display items of vendors
or customer according to the NewG/L 'splitting criteria'.
With Best Regards,
Gladys Xing

Current Header Rows Not Appearing on FBL1N - A/P Detailed Line Item Report

Our A/P staff somehow turned off the header rows at the top of the FBL1N report.    The rows contain the various variables related to the report such as vendor name, vendor address, city, state etc.
Does anyone know how I can change the report so that these variables once again appear on the report?
Thanks,

Michael,
Do you mean that you can not access via the following link?
http://service.sap.com/notes
Well, if this is your case, I will copy note 181592 here since there is only text information and not code correction. I am sorry but the format is not good, but I think this note will help you to insert header again.
If this note does not help you, let me know and I will check the other notes that I have provided.
Please kindly check the note text below:
Best Regards,
Vanessa Barth.
==============================================================
SAP Note No. 181592                          20.01.2009           Page 1
Number              181592
Version             6 from 03.03.2000
Status              Released for Customer
Set on              02.03.2000
Language            EN
Master language     DE
Short text          Line item: Setting-up the headers
Responsible         Christian Auth
Component           FI-GL-GL-D
                     Reporting/Analysis/Display
Long text
Symptom
You want to display information in the headers or change information
preset in the headers for the following: line item display for vendors,
G/L accounts customers or customer information on an account.
Additional key words
Program RFITEMAP, RFITEMGL, RFITEMAR, Transactions FBL1N, FBL3N, FBL5N,
layout variants, layout headers
Cause and prerequisites
You are not familiar with the option of individually setting header
information or how to use maintenance transactions.
Solution
1. Overview
     In the line item report you can display information in the header of
     the list (given that this information is equal for all items
     displayed).
     For example, a customer accounts clerk wants to display the
     following data in the header: account number and name of the
     customer, name and telephone number of the responsible accounting
     clerk for the customer, current date.
     You can use information taken from the account master data. General
     variables like the time and date are also available.
     The following describes how you can set up the layout of header
     information yourself. A header layout is always assigned to the
     particular display variant of the list which you set on the bottom
     of the selection screen or which you can choose using CTRL+F9 on the
     display ('Choose' button). You can therefore personalize the header
     layout as well as the remaining display layout.
     The header layout is output if the account number group is changed,
     if the list has been sorted according to the 'Account' field, and if
     a page break has been set for this field. You can maintain these
                                                                   Page 2
        settings under the menu option Edit -> Subtotal (Ctrl+F1).
     2. Setting up the headers
         Choose from the menu
         Settings -> Display Variant -> Current header rows
         You now see rows in which you can arrange variables. Using the
         pushbuttons in the function bar, you can create or delete rows.
         When you position the cursor at the start position and choose
         function "Gen. variables" (Shift+F5) or "Characteristics..."
         (Shift+F8) a new variable is positioned in the header area. From the
         following dialog box, you can choose the variable (also called
         characteristic) from an inventory.
         Under "Text type", you determine whether the label for the variable
         (for example, the label 'Customer') or if the value itself should be
         used (that is, the appropriate customer number for the items
         displayed in each case). You can display pairs as follows:
         <Label>: <Value>
         for example,
         Customer: 47110815
         If the value is a key for a short or long text (either a name or a
         description), you can also select this under "Text type".
         After selecting and positioning the characteristics, save and return
         to the list. The headers are displayed immediately with correct
         values so that you can check your results right away.
     3. Save the list variant
         Choose "Save" (Ctrl+F12) in the list. In the following dialog box,
         you can enter a name and a label for the list variant that will be
         stored together with your header layout.
         Note that general variants visible to every user have a name
                                                                       Page 3
       starting with the character '/'. User-specific variants on the other
       hand must begin with a letter and are only visible to you.
       Standard variants delivered by SAP in general start with a number
       and have preconfigured headers. You cannot change the SAP variants,
       but you can use them as template for your own enhancements, which
       you can store under another variant name.
   Valid releases
   Software Component                        Release
                                             from            to
   SAP_APPL
        SAP Application
                                             46C          - 46C
                                             46A          - 46B          X
   Further components
   FI-AP-AP-D
    Reporting/Analysis/Display
   FI-AR-AR-D
    Reporting/Display/Credit Management
   Reference to related Notes
   Number    Short text
   306225    Line item: page break when printing lists
   213144    Line item: Header information disappears
   181697    Line item: Header information is missing

**URGENT** - Vendor Line Item Reporting

Dear Gurus,
Need some URGENT help with regards to Vendor Reporting?
Our business has requested for a Vendor Line Item / header Report, which will display ALL Vendor Items NET (before tax).
At the moment our business it manually taking out Tax in FBL1n (Vendor Line Item Report).
Please could you kindly let me know if there is ANY report in SAP which displays the Vendor Items NET & GROSS??
Thanks Very Much
RICK
Edited by: Rick Desilva on Apr 22, 2008 4:00 PM

Hi Shridhar,
All I want is a "net column" - Which will display the vendor invocie amount - BEFORE VAT (Tax).
So on FBL1N or Another SAP-Vendor Report what I need is a
Net Amount column and a Gross Amount Column.
I hope this makes sense and someone can assist....
Thanks & Regards
RICK
Edited by: Rick Desilva on Apr 23, 2008 9:36 AM

Asset Balances & Cost Line items Report

Hi,
I am looking for a Report which would combine Asset (S_ALR_87011963)balance report and Cost line item Report(CJi3) for Projects.

Hi,
The flow is like this ( if u r using timesheets for confirmation):
CAT2 : Timesheet: Enter Times : User enters the time.
CATS_APPR_LITE : Approval of timesheet
CAT5 : Transfer to Projects.
This will post cost to Projects.
Another way of getting the Actual cost is Confirmation using CN25 or CN29.
Regards,

WBS Element on AR/AP Line Item Report

Hi All
When I run the FBL1n report for a vendor who has a PO which has a WBS element - I dont see the WBS element coming up on the line item report(s).
Although the field is there on the layout - it is not picking the WBS Element into the report - can anyone please tell me why this is and how I can get this field to fill with values...
Thank you
Rukshana

hi,
If you had activated Project Cash Management, you can try report CJIA which can substitute the report line item wise list for a particular project or for a Particular Vendor.
Why the standard system is not showing WBS because, a single Vendor line can be posted against multiple expense so system cannot determine which WBS to be shown in the report so it is left blank in reports, this will be applicable for Purchase order no, Cost Centers, WBS etc.
As suggested by Suresh you can use the BTE 1650, but it will keep one WBS in the line even you have multiple WBS elements used for the document posting.
For Ex
Expense 1 Dr 1000- WBS 1
Expense 2 Dr 1000- WBS 2
Expense 3 Dr 1000- WBS 3
Vendor A Cr 3000
Against Vendor line item A - it will show WBS 1 alone.As there is no standard solution you can use BTE if your are satisfied with the above example or you have to activate Project Cash management to find the exact reporting but in different reporting structure.
Thanks and regards
Praveen.J

AP Line-Item Report for State Auditors

Dear Members,
I am preparing one Report named AP Line-Item Report for State Auditors and i need the following fields in my report.
Check Number                PAYR-CHECT
Voucher Number             BSEG-BELNR
Check Date                     PAYR-ZALDT
Voucher Date                     BKPF-BUDAT
Vendor Number             LFA1-LIFNR
Vendor Name                     ADRC-NAME1
Vendor Street Address     ADRC-STREET
Vendor City                     ADRC-CITY1
Vendor State                     ADRC-REGIO
Vendor Zip Code             ADRC-POST_CODE1
General Ledger Acct No     BSEG-HKONT
Purchase Order Number     BSEG-EBELN
Tax Status Code             BSEG-MWSKZ
Taxable Amount             BSEG-HWBAS
Exempt Amount             BSEG-MWSTS
Tax                                     BSEG-MWSTS
Tax Accrued                     BSEG-MWSTS
Total Invoice                      BSEG-DMBTR
I am new to FI.So I request some one please let me know which datasources contain the above fields and which CUBE is best suited for this.
Thanks in Advance for help and quick reply is much much appreciated.
Best Regards
RC

0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

COPA line item report, Number format -output type - object list(ALV).

Hi,
I am preparing COPA line item report. I want to change number format (two decimal place). I did the changes in form level then I did the changes in drill down report as well and saved as save definition.
But changes are not reflecting in- output type - object list(ALV).
Please provide help in this.
Regards

HI
What t-code you are using to write this line item report ?

Line item report on secondary cost element (cat - 21)

Hi Gurus,
Secondary cost element with category 21 is used for internat settlement from order to wbs or wbs to cost center. But can we see line item report on this cost element. Or we cannot see any line item report on this cost element. it is just used for internal settlement purpose.
Please clear this doubt. thank you

Hi Mohit,
I hope you can have line item report @ order and WBS element stright away...
for orders use: KOB1 transaction code for actual line items, where you have the facility of entering CE or CE group to find the vaues related to particular cost elements in the order. If you are flexible with CEs related to 21, give there otherwise create a CE group specific to 21 category and enter the group and find the results you want.
same way for WBS elements/projects: we have transaction code CJI3 for actual line items, here also we can enter CE or CE groups
Not only for actual line items, we have the option of viewing plan line items, budget line items, and commitment line items @ both order and WBS level with different transaction codes other than mentioned above, like KOB2, KOB3, CJI4, CJI2 etc
I hope it helps a lot if I understand your query right
Regards..
Jose

Line item report with Customer number

Hi all,
I am facing the following issue:
I need a line item report to analyze an accrual account by customer.
Since the customer is not captured on the accrual account itself, but on the recon. account (which is not defined as line item display), I did not find a way to present the customer and the accrual on the same line.
I can always go to BSEG and vlookup and match by document number the accrual account and the customers from the customer recon. account, but I thought maybe someone has a better idea.
Thanks,
Yoel.

If the recon account line items have al lthe info needed I'd suggest using a query (SQ01).
1. Create an Infoset in SQ02 with logical database "BRM". Choose the fields from BSEG that you need
2. Create the Query in SQ01 using that Infoset.
If you want to see individual line items, include the fields you want in the "basic list" of the query. If you want totals by customer, don't include anything in the basic list, but make a "statistics" with customer and amount.
Selections would habe to be made for account no and period.

Create AP/AR line item report for parked items

Dear all,
Has anyone been able to create a line item report in AP or AR that includes parked items? I have created an aging report using standard 0SAPDUEAN-01 as a base, using report painter. Now the Finance department want to be able to see the numbers of the parked invoices as well but I am not able to find a way to pull these.
Does anyone know if this is actually possible?
many thanks

Hi,
by using of TCODE. FBV3 it is displaying parked documents
based on document type.
K.Satish

SKF line item report

Hi,
What is the t.code to see SKF line item report
Bye,
Ramesh

Hi,
I an the report the total value are appearing and when i am selecting the actual line items the message is "Assign a receiver report to the report". What should i do?
Bye,
Ramesh

Vendor line item report in New GL

Hi
We have activated New GL. We need vendor line item report based on GL view. FBL1n provides report based on entry view. But we need simillar to FBL1n based on GL view. There is a standard report S_AC0_52000888 which provides vendor line item doucment wise with New GL characteristics such as profit center. However, this report does not provide additional information such as posting date, due date et.c which is available in FBL1n. Hence, we are unable to monitor vendor accounts at profit center level.
Can anyone suggest how to add additional fields in the above report or any other report available for the same.
Thanks
S.Radhakrishnan

hI
Thanks for the reply.
As per your suggestion, we need to bring GL view parameters from FAGL* tables. I need clarification here:
1. In our case, single line item in BSIK may correspond to multiple profit centers and hence multiple line items in FAGL* tables.
2. Users run the report for multiple vendors ( beig range) with their profit centers as selection criteria.
3. In the above case, we need to select all the line items for that vendor and go to FAGLFLEXA and select all line items and delete all line items not pertaining to the profit center entered as selection.
4. The above process would be time consuming since all the open items will be selected and then delete all those items which are not required.
5. Else, can we select the items from FAGLFLEXA directly for the profit centers entered and bring additional information from BSIK table. Since vendor accounts are not there in FAGLFLEXA, it would be cumbersome and time consuming.
6. Which of the above approach would you recommend.
7. Is it possible to modify the ACO report so that we can add additional information such as posting date, due date etc.
Regards
S.Radhakrishnan

GL Description in Line item report FAGLL03

Similar Messages

Maybe you are looking for