GL Interface (Approval Status ) problem

Hi All,
I have successfully imported Payroll data to GL Journal using GL Import Program (GL Interface) with APPROVAL STATUS = N/A
Now, My requirement is that the APPROVAL STATUS of journal should remains REQUIRED after importing Journal.
Can anyone help/guide me ?
regards
Sanjay

Hi Sanjay,
If i am right, the way you set up the journal approval for a source is by doing the following settings:
1) Enable Journal approval at the SOB level
2) Enable journal approval for the source at the Journal Sources window for the particular source i.e. Payroll
3) Thereafter when you import the journal for the payroll data, using the GL interface the status of the approval flag will be set to required.
Please correct me if i am wrong.
Thanks
Manish Jain.

Similar Messages

MSS---Compensation----Review Planning Approval Status Problem

Hi All,
I configured MSS Compensation Review Planning successfully, i was able to see my reporting structre in Review Planning iView properly.
I am having my organizational structure with five level approvals.
Whan i was submitting Compensation plan for my employees as an first level manager it went to higher level for approvals. as an higher level manager i rejected what ever the lower level manager was submitted for approvals. The status "rejection" was updating fine in infotype 0759 without running any reports.
again i submitted for approval as an first level manager to higher level manager for approval, this time i approved as an higher level but the "Approved" status is not updating in infotype 0759.
We are facing this issue with all level managers.
This is the first i am configuring MSS EHP4 Compensation Review Planning.
If any one facing this issue and having solution, please provide the proper solution.
Thanks in Advance.
Regards,
Abhiram.

Can u pls update the solution
Thanks,
Chowdary

Approval Status report

Dear All,
One of user not able to remove the rejected report
from Approval status report.
Regards
Aarati Kollur

The user is not supper user.
Yes problem is only that particular user.
Regards
Aarati

Approval status of PR is in process, but action history show 'Approve'

Dear all,
I am on EBS 11.5.10.2 and encountered a problem during the approval process of PR.
The approval hierarchy with PR is planner -> approver1 -> approver2,
and approver2 is the final approver.
Everything of the approval process is OK except that the action performed
by approver1 shown in Action History is 'Approve', but not the appropriate
'Forword'.
Sequence Performed By Action Approval Status
0 planner Submit
1 planner Forward In Process
2 approver1 Approve In Process <---- Here the 'Approve' action should be shown as 'Forward'
3 approver2 Approve Approved
Any ideas will be greatly appreciated!
Regards,
Henry Huang
Edited by: user8960428 on 2011-7-7 上午8:13
Edited by: user8960428 on 2011-7-7 上午8:15

For requisitions the action taken by the approver is recorded. If they click on Approve, the same is recorded in action history.Shivaraj, for POs with the similar position hierarchy, if the approve1 click on Approve, action history does show 'Forward'.
Do you mean the action taken by the approver1 is different between Requisitions and POs?
Edited by: user8960428 on 2011-7-12 上午8:03

Intel Management Engine Interface, Device status: This device cannot start (Code 10).

hi Tec,
Under System devices for the Intel Management Engine Interface, Device status: This device cannot start (Code 10). Using original driver version: 6.0.0.1179 A released date 09-12-2009 (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79194-1&cc=us&dlc=en&lc=en&...=), running OS windows 7 Enterprise, 64 bit. HP Pavilion dv3-2390eg Entertainment Notebook PC.
Issue: my computer auto restart after 2 hours please resolved the issue
Logs captured from System summary:
[Problem Devices]
Device PNP Device ID   Error Code
Intel(R) Management Engine Interface
PCI\VEN_8086&DEV_3B64&SUBSYS_1404103C&REV_06\3&11583659&0&B0       this device cannot start.
Cisco Systems VPN Adapter for 64-bit Windows                ROOT\NET\0000               This device is disabled.

Hi Jeenny,
Welcome to Lenovo Community!
As per the query we understood that you are facing multiple issues on your ThinkPad Edge E540.
You can download Intel(R) Management Engine Interface directly or run ThinkVantage system update utility and update the entire required driver for your system.
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Po approval status is showing as Incomplete

Hi,
Can anyone please guide me in getting po approval status as approved.Iam a beginner in oracle apps.Is there anything to be done with oracle workflow related to po approval for getting the PO status as approved. Iam getting the sent notification from clerk log-in in notification summary.but the approved notification in notification summary is not changing to approved status in navigation->po/po eventhough manager is approving the notification.I set the security option as public.
Latha

Hi JayaChandra,
Even I am facing the same problem. I Created a 'PO Requsition' .It is Approved and after that I am 'Auto Creating' a PO from the 'Requisition' approved .
But I am unable to approve the PO that is created.I am approving by myself and I am not forwarding it.The Status is showing 'InComplete'. But I am Able to Approve a 'Manual PO' but unable to approve 'Auto Create PO'. I dont know the problem and the approval limits are set properly.
Thanks in Advance,
D.V.Narasimha Rao

SP2010 Designer workflow "Set Content Approval Status" does not work

Hello
I'm having a problem with a workflow for one of my clients.It is a SharePoint 2010 environment and I can only use SharePoint 2010 designer (no visual studio).
We have an approval workflow in place, which works great. After the document approval workflow has does its thing, a new workflow can be launged by specific users (they have writing rights and can approve content). The workflow is used to set the release
date of the document. This can only be determined after content approval.
However, when the release date is set, the document approval status is changed to concept. This is of course to be expected, as we changed to document metadata. That is why I wanted to add the action "Set content approval" to this workflow. I cannot
seem to get this action to work. Right now the workflow does the following:
check out the document (check out is obligatory in our library)
set the release date field to the released date parameter (defined when starting the workflow)
check in the document
set content approval to approved.
The release date gets set to the parameter value, but the document is not checked in and the content approval status is not set. SharePoint produces the following error message (translated from Dutch): "An error occured. Cannot edit the item, possibly
because one or more columns require another type of content. Unknown error."
Guided by other posts online I gathered that this might be because the actions checkin and set content approval occur to close together. I tried letting the workflow pause for the duration of 1 minute after checking in, but this pauses the workflow indefinitely.
I then tried 5 minutes (as this is the time standard set by SP2010 designer) but this also resulted in indefinite pausing.
Posts online lead me to believe that I'm not the only suffering from this problem, but as of yet, I haven't been able to find a solution that works for me. Hopefully someone can help me.

Hi,
According to your post, my understanding is that the "Set Content Approval Status" didn’t work in SharePoint 2010 Designer workflow.
I try to reproduce the issue and the result is the same as yours.
If I only check out and check in the item, the workflow works well.
However, once I set Content Approval Status after checking in the item, the workflow get error.
As a workaround, I recommend to use two workflow to achieve what you want.
First, create the first workflow, and allow the workflow to be manually started.
Then, create the second workflow, and
start the workflow automatically when an item is changed.
When you start the first workflow, the document will be set value of the release date. And then the second workflow will be started automatically to set the content approval status.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Importing PO in approval status

can we import Project coded POs in Approved status or if there is an API to achieve this without having to trigger PO Approval workflow. Several years ago, as part of Procure.Net project in 11.0.3 version, we used to trigger the Requisition Approval work

Yes.. you can import the PO with approved status and project using PDOI (Purchase Document Open Interface).
Following 3 interface tables are used to import the PO.
PO_HEADERS_INTERFACE
PO_LINES_INTERFACE
PO_DISTRIBUTIONS_INTERFACE
You have to populate the project id to import the po with project no.
Oracle Apps: Purchase Order Interface

Iam getting PO approval status as incomplete

Hi,
Can anyone please guide me in getting po approval status as approved.Iam a beginner in oracle apps.Is there anything to be done with oracle workflow related to po approval for getting the PO status as approved. Iam getting the notification in notification summary.but the approved notification in notification summary is not changing to approved status in navigation->po/po.
Latha

Hi JayaChandra,
Even I am facing the same problem. I Created a 'PO Requsition' .It is Approved and after that I am 'Auto Creating' a PO from the 'Requisition' approved .
But I am unable to approve the PO that is created.I am approving by myself and I am not forwarding it.The Status is showing 'InComplete'. But I am Able to Approve a 'Manual PO' but unable to approve 'Auto Create PO'. I dont know the problem and the approval limits are set properly.
Thanks in Advance,
D.V.Narasimha Rao

Controlling approval status report cancel option

Dear Experts,
Is it possible to control the approval status report screen based on Stored Procedure?
Im having problem with users cancelling their draft documents before any approval status is decided upon the draft. Through the images below i want to control the cancel option they have
can the update button be controlled through store procedure? as I cant get the object type of this screen.
thanks in advance
Regards,
Balwant

Hi,
is the approval status report which can be set as read only in SAP B1 9.0 and above?
Cause currently im using SAP B1 8.82 Pl 13 and cant set read only
Regards,
Balwant

Po in awaiting approval status in SRM 4.5

Hello Friends,
I am working on SRM 4.5,
I am facing a problem in completing the workflow of a PO. My SC is approved the PO which is created is with the status
Stats:
HEADER     E0002
HEADER     I1015          Awaiting Approval
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1043          Ordered
and workflow status:
Workflow Item:
Workitem-ID        000041330725
Task               WS14000145
Text               BAdI approval for Purchase order no. 2001013185, GUID 94E89401F7EF8A4EA8898F4A67A288F5
Status             STARTED
Statustext         In Process
Date               29.04.2014
Time               16:22:55
Now what should i do to complete the workflow. Is there any transaction or function module or any table with which i can complete the workflow??
Thanks in advance,
Sarnava.

Hi Sarnava,
Is your PO waiting for approval or is it struck in awaiting approval status.
Check SM58 transaction to see if there is any failures on the day of PO creation.
If there is no failure and you want to complete the PO manually go to transaction SWIA and enter the header work item id and then click on complete manually. This will complete the workflow.
Regards,
Suresh

How do we identify SC that are stuck in awaiting approval status?

All,
Extended Classic Scenario   7.01
We have Shopping Carts set up for auto approval.    From time to time some Shopping Carts get stuck in awaiting approval status and we need to manually force them to go.   We have not been able to identify a root cause for this so we would like to create an abap that would identify those SCs that are stuck then submit   BBP_REQREQ_TRANSFER   to transfer those SCs.
The problem we are having is finding the correct combination of status's that will capture those SCs that are truly awaiting approval.
We first find all those SC with status = I1015 (awaiting approval)
Then we exclude those with status i1040 (deleted) and i1129 (followon document created)
It seems in our testing that sometimes the status i1129 has an "X" in the inactive column.   Should those then be reprocessed and therefore not excluded?
Thoughts...
Sandra

Hi Sandra,
For your code logic, I1129 with inactive X should be included to get the list of SC which are in awaiting approval or may be approved but without follow on doc.
But could you check if you get any message in RZ20 after the follow on doc is created and it becomes inactive ?
may be you can check the SAP note: 1499352 - SRM Transfer: Redesign, bug fixes
Best Regards,
Anil

XML News Approval Status in Layoutset

Hello,
I'm also having a problem with the approval status. I have added the workflow status to the xml form, but the problem is that the status doesn't change, when submitting or releasing. The statemanagement commands were added to my layoutset, which is a copy from AppBulletinBoardExplorer.
The layoutset consists of:
2 collection renderers:
AppBulletinBoardCollectionRenderer
AppBulletinBoardHTMLCR
2 resource renderers:
AppBulletinBoardResourceRenderer
AppBulletinBoardSubAreaResourceRenderer
I have added:
state to the displayed properties and visible properties and the 'Show Resource Properties' to all.
The problem is that the workflow status isn't properly displayed in the xml and that i'm also not able to show the properties outside the xml, in the layoutset.
When I look in the KM content it does display the right workflow status.
I hope that one of you can help me.
Thank you in advance.
Greetings,
Joost Christenhusz
Does someone got other suggestions?
I found out that in the AppBulletinBoardEditResourceRenderer (in which I the property cm_state) added the settings resource renderer: NewsRenderer is the reason for not showing the property cm_state properly.
This resource renderer is calling a java class however. Changing this renderer into ResourceRenderer shows the state properly, but hides the newsitems.
I hope that anyone can help me.
Greetings,
Joost

Hello Patricio,
Thank you for your trouble. Unfortunately it doesn't work correctly yet. The following happens.
After submitting a document or approving a document the workflow status doesn't change in de renderlistitem. However the correct workflow status does change in de show form. Also does the status in the renderlistitem does when I click on 'generate project' in the XML Form Building.
It looks like the workflow status in the renderlistitem isn't dynamic. How can I change that?
I looked at the global settings form the two forms, but they appear to be the same, except from the HTML Fragment. Changing this doesn't have any effect.
Thank you in advance.
Greetings,
Joost

Approval Status Collaboration error

Hi
As I was changing the approval status of an appset, I suddenly received the following message:
Error:Initializing failed (Error of retrieve information about current entity).
When I click onto the category or Entity I receive this message: "Your user ID does not have the correct permissions to access this application or dimension.". I have rebooted my machine and processed security and this has had no impact. I have admin rights in this appset. Has anyone come across this before?

Hi,
You will have a folder in your local system for BPC. This folder should be available in the my documents folder. Please delete that and then login to BPC admin through connection wizard.
Is everyone facing the same problem or is it only your ID? Please try doing it with other IDs in your system. This will help us to identify whether the problem is with the ID or with the system.

Invoice Approval Status report ends up in error

Hello Gurus,
I have submitted "Invoice Approval Status" concurrent request and the output was correct desired one but recieved the below error.
REP-0069: Internal error
REP-57054: In-process job terminated:Finished successfully but output is voided
It runs well all the time, but it appeared once. What might be the reason for this and what can I do to avoid this error.
Thanks
Raj

936248 wrote:
Hello Gurus,
I have submitted "Invoice Approval Status" concurrent request and the output was correct desired one but recieved the below error.
REP-0069: Internal error
REP-57054: In-process job terminated:Finished successfully but output is voided
It runs well all the time, but it appeared once. What might be the reason for this and what can I do to avoid this error.
Thanks
RajPlease see these docs.
APXINROH errors with REP-0069:Internal Error REP-57054 In-process job terminated:Finished successfully but output is voided [ID 1351791.1]
APXIIMPT - Payables Open Interface Import In Error [ID 1307261.1]
Thanks,
Hussein

GL Interface (Approval Status ) problem

Similar Messages

Maybe you are looking for