GL is not appearing in Report S_ALR_87013326

Hello Gous,
One account is not appearing GL is not appearing in Report S_ALR_87013326 for example:
Account group = Other Expenses
Description = Dividend expense
it has accounting document as well and postings.
Thanks in advance
Ahmed

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

Similar Messages

GL & PC description not appear in report painter (ECC6)

Dear Expert,
kindly help me on this issue. GL description and Profit Center description not appear in report using OFL Table.

Hello sayujya Patil,
Thanks for your reply, i have created report in Report Painter, after execution the report i tried in all the parameters under setting menu > report and section layout as well> lead column --> and kept the radio button on key and description, still its not showing the description of the GLs under lead column....
Please reply...
Thank You.

Crystal Reports - Charts do not appear on reports in some cases

We have a few reports that include charts on them (created with Crystal 2008 Designer). These reports have run fine for quite a while but this morning we got a support call with a client reporting that though the reports process and appear correctly, the charts do not appear - instead the client can see a box where the charts should be - but no charts appear.
Wait... This has a curve ball...
The same client then ran our application on the SAME machine, but in a VM (virtual machine) on that machine, and now, the charts appear!
I can understand that if a machine is low on memory, charts might not appear - but then why when a VM is used on the same machine do charts suddenly appear?
Is there any way, any suggestion someone can offer by which I can 'trap' this situation in code, PRIOR to producing a report that is going to have a big blank spot where a chart normally appears?
Thanks for any help - much appreciated.

Nope... Not video corruption... We finally figured it out...
Its the 12_0 runtime. Run it, and you dont see any charts, no errors, no warnings, just no charts - update to the 12_1 runtime and voila, charts are suddenly present.
Just to be sure we were not going nuts we uninstalled, reinstalled the 12_0 and no charts again - put in the 12_1 runtime and there they are again.
Problem solved.
Edited by: Bruce Landry on Mar 9, 2010 7:50 PM

Budget not appearing in Report S_ALR_87013558

Hi Friends,
For project the budget is not getting displayed in Report S_ALR_87013558 though the budget is planned by TCode: CJ30 and released also by TCode: CJ32
Is there any setting in customising in information systems to display in the report.
I think same question was raised by selvakumar venkatachalam earlier..... but there is no specific soln in his thread.....
Please treat this as Urgent.....
Regards,
Gupta
Edited by: Gupta KNVS on Feb 7, 2008 11:33 AM

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

Intrastat report Spain. Credit memos posted not appearing in report

Hi
I have a issue where the debit notes raised to vendor are not appearing in Intrastat declaration.
How this debit and credit notes must be taken by Intrastat ? This problem is there since the Intrastat report is being used.
Is there any specific configuration for this or
is there any period check because of which the debit notes are not picked?
The reason is po was created in Feb 2009 and continuous GR and invoice postings happened in subsequent months which are all captured in Intrastat report. A debit note was raised in Sep 2009 which does not appear in the report.
Request your expertise and help to resolve this issue.
Thank you

credit memos are not supported in SAP as you can read in docu:
http://help.sap.com/saphelp_sbo2005ao/helpdata/en/F3/4392579F5DC24E9FBE2FA84E9E7660/frameset.htm
Please read the local Intrastat guide, in many countries it just says that you have to file a correction per paper form to your statiscal office.
SAP explains this as well in OSS note 374682:
If a credit memo refers to a billing document which was already declared to authorities, proceed as follows:Here, you should create a written correction to the statistical office.Specify a data record to which the credit memo refers.
Check the documents of the statistical offices for information on when you have to declare the credit memo (limits for values and quantities).*********************************************************************

To Do List item not appearing in Reports

Has anyone had success in implementing the To Do List? I followed the instructions posted on Adobe (written by Peter Grainge):
Create a New To Do item (or Edit an existing one)
Check it as completed for a topic
Add To Do List to the items that will appear in a report
Generate a report
The To Do item does not appear in the report.
There's also no indication in the help about whether you can create new items AND edit existing ones (or just one), and if there is a limit to the number of items allowed. Seems like I remember seeing/hearing about certain restrictions of that type when the feature was initially announced.
Leon

Are you referring to something I posted here or on my site?
This bug was reported a few weeks back and I believe it was reported. However, the more people who report it affects them etc...
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
See www.grainge.org for RoboHelp and Authoring tips

Cost elements not appearing in report

Hi,
We have reports done in report painter. we use cost element group to retrieve the amounts posted to that group.
I added 2 more accounts to the cost element group and saved.
but it is not appearing when I run the reports which shows cost element wise amounst for teh period.
rgds
Neha

Hi sanjay,
thanks.
But GR53 gives me Library and report group.
when i go to GRR2, gives the library I see in GR53, and search report group in list of values ,
I am not able to see the report group as above.
When I manually type in it says
Report Y511 does not exist
Message no. KH 502
Diagnosis
You tried to change a row/column structure which does not exist.
Procedure
Choose an existing row/column structure or creating a new one using
    'Row/column structure' -> 'Create'.
Pl advice.
thanks
neha

Results are not appearing in report

Hi All,
When user ran the report, it gives below error.
A general error has occured[nQSError:1207]Unexpected socket read timeout: connection terminated by network, e.g. by the firewall.
But when ran the query in the backend it fetching the results and in criteria it contains SET OPERATOR with UNION,but not appearing the results in report.
Regards,
Niranjan

Hi, Thanks for your response...
When i ran the report with diffrent/default combination then i am getting the results.
In my criteria SET operator is used for combining of similar request and we have diffrent filter conditions and dashboard prompts also.
Connection from back end is fine,because iam able to get other report results also.
Regards,
Akkapeddi

Plan next yrs values not appearing in Report Painter

Hi,
In our one of Z report (developed thrugh SAP std Report Painter functionality), Plan next yrs column does not shows any value in output of report.
Basically this column should show next years plan values for WBS Element cost elementwise.
When I double click on any of the cell of this column, I am getting output with 0 records but selection criteria is appearing as Period 7 and Fiscal year as 2999 on output screen on the top. So I am thinking that output is not appearing because of wrong selection criteria field values/characteristics values.
Just wanted to know from you all guys, what things should I check in Report Painter to resolve this issue? Also what are the causes of this issue?
Could you please tell me the remedial procedure and transaction code to resolve this kind of issue?
Edited by: SWAPNIL PRAMOD KHARUL on Jan 30, 2011 12:17 PM
Edited by: SWAPNIL PRAMOD KHARUL on Jan 31, 2011 9:29 AM

Hi,
Thanks for reply.
Characteristics are:
Value Type: ZCJUL01
Value Type:10
Version:6-VERP
Period: 7
Valuation:0
Object ind.:1 to 5
Object ind.:P
Fiscal Year: Z-GJHNJ Next Year to 2999
I think it looks like wrong Period selection characteristics value.
Please suggest/guide what has to be done?
Edited by: SWAPNIL PRAMOD KHARUL on Feb 3, 2011 9:19 AM
Edited by: SWAPNIL PRAMOD KHARUL on Feb 3, 2011 9:21 AM

COPA Plan values not appearing in report

Hi
I posted COPA Plan values using KEPM and line items are appearing in KE25 but no values are not being appeared in COPA line item report we created using report painter. We used KE94 and KE91.
Actual values appearing correctly in report.
Any help??

Check if you have Plan/Act indicator maintained correctly with the plan value. If it shows up in other reports, I don't see any reason why it will not show up here. I would also check other parameters entered in the report and see if any other characteristic is preventing plan values from populating.
Shail

Serial number does not appear in report file name

HI,
I'm using TS4.1. I'm getting a report with the serial number. However, the filename of the report does not include that serial number.
example:
UDT_Report[NO_UUT_SERIAL_NUM3][2 35 46 PM][9 15 2009] (see attached file)
Any idea what happend or where to look
thanks
Rafi
Attachments:
UDT_Report[NO_UUT_SERIAL_NUM4][2 40 58 PM][9 15 2009].txt ‏10 KB

Hi Rafi,
How are your report options set up?
Charlie Rodway
Test Design Engineer
Rolls-Royce Controls and Data Services Ltd

Horizontal scroll bar not appearing-Alert report screen

Hi All,
I have an agent setup which shows alerts and a report is fed as an input/delivery content. The report is fairly big with many columns and cannot fit in the standard alert screen hence need a horizontal scroll bar to view all the columns. But unfortunately there are two vertical scroll bars which are appearing and no horizontal scroll bar. Could the experts please let me know if this is a bug or is there any configuration that I am missing?
OBIEE version: 11.1.1.5
Any help would be appreciated.
Thanks,
Vikram

Hi,
Sorry for the delay in response. The issue was because of IE7 version. Its a bug.
Thanks,
Vikram

Variable Text not appearing in Report

Hi All,
I have created one BEx Query in which in selection criteria i am giving verson (100) , Year (2008) , Posting Period (10 - 12) i have one key figure is Total Value in GC . Now my req. is when i run the report , in keyfigures these values like Period 10 - 12 in GC must appear in column header.
I created variable in BEx designer for Period like ZIS_A1_CUR_FROM_TEXT and ZIS_A1_CUR_TO TEXT . and i defined all the properties correctly. Now when i run the report it shows me variable name like &ZIS_A1_CUR_FROM_TXT & &ZIS_A1_CUR_TO_TEXT ... but it should show me Period 10 -12 in GC.
Should i set any properties ? or did i forget any properties to set ?
Regards,
BI NEW

Hello,
Firstly if ur KF is a calculated KF then the text variable will display only if there is no overlap of variables belonging to same characteristic.
If it is just restricted KF then try,
Processing type: Replacement path
Replace variable with: External characteristic value key
In that the lower 2 settings are OFFSET START & OFFSET LENGTH...
Try changing this 2 settings with negative and positive values and see if it brings you the perfect output
if in Dev sys.
try displaying each text varibale one at a time instead od showing both together.
As the last option u can delete the two text variables from its definition and create them again
Regards,
Dhanya

Assets not appearing in reports.

Hi Friends,
In Asset accounting for us there are 3 assets not showing in 2011 fiscal year, until last period 0f 2010 they are showing in asset balances report, these 3 assets are not scraped or deactivated . Please advise me what might be the possibility.
Thank you.

Hi Muralidhar,
I understood but actual scenario is in 01.04.2003 asset is acquired from legacy system and values posted in 2007 both the acquisition cost and depriciation are posted since no depriciation is running with out values and asset is apparing in balnce report with NBV 0. But now for 2011 is the life of asset completed is that the reason no values in 2011. Actually asset we are not supposed to scrap it is a customer place and v should show as asset.Please clarify me.
Regards
Satishh

Step results not appearing in report

Hello. New to TestStand. I've creted a String Value Test that compares the UUT Serial number using RunState.Root.Locals.UUT.SerialNumber. However, when the report is generated I see no step results. This is only happening with this sequence and not with any of the tutorials. Can anybody point me in the right direction for this. Thanks.
Solved!
Go to Solution.

Here is the sequence file and the LabView vi I'm using.
Attachments:
Serial Content.seq ‏7 KB
String Value Test.vi ‏14 KB

GL is not appearing in Report S_ALR_87013326

Similar Messages

Maybe you are looking for