GL LINE ITEM DISPAY

Hi ,
Please assist
On GL line item display, the asset and sub asset field is not being updated from the depreciation run.
Is there a way to have this field populated when the depreciation is posted to the General ledger.
Many Thanks
Pops Balram

Depreciation postings doesn't get updated Asset wise. Postings are summarized based on cost center and Business Area.

Similar Messages

Line Item Not dispaying in Payment Advice standard report

Hi Experts,
I have cleared line items of a vendor by making payment through F-53 and subsequently generated the Print Form spoon request through FBZ5. But in the print, line items (cleared Items) doesn't display in Payment advice report. But for the Fiscal Year 2009 line items (Cleared item) was displaying in the Payment Advice report which is now not displaying.Since it is a standard report no changes made. So please suggest how to achieve it.
Thanks in Advance,
Arabinda

Hello,
In tr. F-53 you post a payment document,
but to print a check you need to use some check printing program.
SAP-delivered program is RFFOUS_C and it processes only
one bank line per payment document.
Please check the following general information:
The standard form (of the print program RFFOUS_C) prints the invoice
items followed by the check. If the item details overflow to the next
page, then the first check (eg cheque no. 1) will be voided and you'll
get the valid cheque on second page (eg cheque no. 2). This is standard
functionality.
Also I would request you to recheck your customising in FBZP i.e.
    -> Click on the 'Payment methods in company code' button
    -> Double click on the appropriate 'Pymt meth.'
       -> Click on the 'Pyt adv. ctrl' button
          ¦ Note to payee lines on the form /               ¦
          ¦                                                  ¦
          ¦ O restricted to                       98 Rows   ¦
          ¦ O None                                          ¦
          ¦ O as many as req                                ¦
          ¦__________________________________________________¦
- The first option will restrict the number of lines on the form to a
value from 1 to a maximum of 98.
- The second option will restrict the number of lines on the form to
zero.
- The third option option will not restrict the number of lines on the
form.
You may test in the system which among the three options will suit your
needs. There is a documentation available at the side of each button.
Also please check whether the problem happens with the standard SAP
program. You may wish to review the documentation for RFFOUS_C via
transaction SE38 -> Enter program name -> Select 'Documentation' radio
button -> Display -> scroll to 'Setting up and changing the SAPscript
forms (layout sets)'.
Also you can refer to the parameter `No form summary section' in the
variant of RFFOUS_C. By setting this indicator, you can prevent the form
summary section from being printed hence the overflow is avoided and
thus eliminates the voided check issue. Please refer to F1 Help of this
field for further information.
Also please refer to the F1 help on the indicator "Indicator: Do not
Void any Checks" in the selection screen of payment program RFFOUS_C.
I hope this helps.
BR,
Raquel

Unable to capture field values in Master agreement Line Items

I am trying to get the field values from master agreement line items page. I have written the following code to get the line item details which is working fine to capture part number and quantity->
agreementBean = doc.getRootParentIBean();
lineItemCollection = agreementBean.getLineItems();
collectionsize = lineItemCollection.size();
for(i=0;i<collectionsize;i++){
     collectionbean = lineItemCollection.get(i);
     partNum = ""+collectionbean.getPartNumber() ;
     Quantity = ""+collectionbean.getQuantity();
     throw doc.createApplicationException(null,partNum + " , " + Quantity );
Now, my problem is that I am unable to capture the following field item values in the master agreement > line items page.
1. Price Unit
2. Unit Price
3. Product Category
4. Plant
Please help me to find the values.
Thankx in Advance.
Su
Edited by: subrataindra on Aug 10, 2010 11:11 AM

This will return the name of the plant.
.getExtensionField("PLANT").get().getDisplayName(session);
Check if this returns the product category
collectionbean.getExtensionField("ITEM_CAT").get().getDisplayName();
This will Return the Price
collectionbean.getExtensionField("PRICE").get().getPrice();
(return type :BigDecimal)
This will return the currency
collectionbean.getExtensionField("PRICE").get().getCurrency;
(Return type:String)
Similarly to retrieve other fields for which there are no standard functions, use .getExtensionField("Field ID")
Hope this helps
Regards,
Immanuel

Vendor Line Item not cleared after F110

Hi Gurus,
We encountered an issue. The payment run was processed last April 18 and the vendor invoices were captured during the payment run and in the aging report, these invoices didn't appear as Open Item.
In between April 19 until August 19, these invoices are not part of the proposal list until the when they run payment on August 20. The value is zero and in the proposal list, there is a value in the Reason to Print Advice "A".
What is the reason for this?
Thank you.

Hi Dianne Obviar,
For that invoice payment delete uncompleted payment
proposal.
U go through this path select F4 in run date field
There check it any un completed proposal is there and delete
that invoice line item will come for payable
Regards
Surya

Open Item and Line Items are not matching

Hi Gurus,
I ran the EFT for vendor #1600109 for payment on 10/18/07. If I run the vendor open items report (ZFI019) for today, it shows the balance net of the EFT that is $203,466 ( $263869 - EFT Value is $60,403).
When I ran the vendor line items display (FBL1N), it shows all the invoices including the invoices paid on the Oct 18 EFT $263,869 which is (2034,66+60,403).
User wants the open item report should tally the line item display.
I will assign good points.
Thanks for your help
Prashanth

Hi Gurus,
EFT is working fine. But the Vendor Open item Report (Custom Report) and Vendor line item report (FBL1N) is different.
We are looking a balance for a vendor as on 15th where the balances are not matching between the reports but if i run FBL1N on 18th the balances are matching.
Clearning date is 18th
Posting Date is 15th.
Thanks
Prashanth

Urgent - "Vendor balances carried forward and line items report."

Hello,
Is there any report which will give me the vendor balance carried forward and the line items during that period.
==============================================
Format-
eg: statement taken from 1.8.2006 to 30.9.2006 is required as
Bal b/f 25000 cr.
3.8.2006 Purchase Inv XXX 3000 cr.
5.9.2006 Payment Chq XX 26000 dr.
Bal c/f 2000 cr.
==============================================
Please advise on this.....
Regards,
J

thanks for the response, but i have already tried those transactions.
FK10N will give me the periodic bal statements and NOT line items display which will also have balance carried forward.
F.41 and F.43 again gives the periodic and line items...but i want the vendor balances to be in the format given above..
like say, account statement.
Please advise............
Regards,
J

Report for bom wise target and actual cost as well as qty at line item

Dear Experts,
Is there any standard tcode for bom wise target and actual cost as well as qty at line item level for the month.
there is one tcode s_alr_87013127 but user has to double click in order to get line item details.
I want to see line item wise breakup/bom wise target and cost cost as well as qty.
Thanks in advance.
regards
RK

Dear experts,
I am still looking for a revert.
regards
RK

Customer/Vendor A/C with line item details and with opening and closing Bal

Dear Sir / Madam,
Is it possible to have a customer and / or vendor Sub-Ledger account-
with line item details and with opening and closing balance detail
for a particular period.?
Regards
Chirag Shah
I thank for the given below thread which has solved the same problem for G/L Account
Re: Report to get the ledger printout with opening balances

Hello Srinujalleda,
Thanks for your precious time.
I tried the referred T-Code
But this report is not showing Opening balance, closing balance detail.
It only gives transactions during the specified posting period and total of it.
Please guide me further in case if I need to give proper input at selection screen or elsewhere.
Client Requires Report in a fashion
Opening Balance as on Date
+ / - Transactions during the period
= Closing Balance as on date
As that of appearing for G/L Account by S_ALR_87012311
Thanks once again & Regards
Chirag Shah

Vendor Line item with Opening and Closing Balances report regarding

Dear All,
I need a report for vendor line items with Opening and Closing balances.
Thanks in advance
Sateesh

Hi
Try S_ALR_87012082 - Vendor Balances in Local Currency
Regards
Sanil Bhandari

Vendor Line Items

Is there any std BAPI or FM to get Vendor Line Items?
Is there any database Table which shows all Vendor line items (open and cleared)?
Note : table BSIK shows only open line items.
Thanks in advance. Points will be rewarded.

hi Nikhil,
yes, open items are in BSIK, cleared items are in BSAK. There is no table where you can find both! Acc. to my knowledge, there is no FM or BAPI to give back the information you need. You have to select from the tables. In fact you can find all items in BSEG (together with debitor and G/L items), but selecting from that table can take ages...)
hope this helps
ec

How to clean line items

Hi,
This is in 11.5.10.2.
For Balance Sheet review/clean up of GL Accounts, we are facing following Problems.
When we query a particular GL account the number of lines fetches are more than 6 lakhs line items due to which we are not able to extract complete dump .
The data Extracted is not getting classified into open and cleared items (Clearing) at GL level and therefore the data line items are enormous. Can you suggest something in this regard as to how to proceed further? IF you can share the methodology being adopted by any of you, it will be a great help.
Thanks

Hello.
Can you please try the following query? I'm not sure were are you keeping the data that indicates that the lines are not adjusted so i included the JGZZ_RECON_STATUS field but you can adjust the query to your needs.
SELECT l.effective_date,
h.je_source,
h.je_category,
l.description,
nvl(sum(l.accounted_dr),0),
nvl(sum(l.accounted_cr),0),
l.jgzz_recon_status
FROM gl_je_lines l,
gl_je_headers h
WHERE l.je_header_id = h.je_header_id
AND l.set_of_books_id = <your set_of_books_id>
AND l.effective_date >= '1-jul-09'
AND l.effective_date <= '2-jul-09'
GROUP BY l.effective_date,
h.je_source,
h.je_category,
l.description,
l.jgzz_recon_status
Hope this helps, otherwise repost.
Octavio

Report for GR/IR line items - with PO details - profit center wise

Hi
My client uploaded stock and instead of using MIRO, directly passed the journal entry
Consumption
To Vendor
Now, the original entry of
Stock
To GR/IR
remains.
How can I make the GR/IR account nil and also remove the open items in the corresponding Purchase Order ?
Thanks in advance.

Hi,
You can use a substitution to update the field through FI. Use GGB4 for wirting a substitution you may need some ABAP coding to substitute PO no and line items in the assignment field. rule would be Co code =XXX and GL account =xxx and Posting date earlier than =xxxx then concatenrate EBELN and EBELP in Assigment field Zounr.
Then execute FBL3N and edit the assignment field by selecting all the documents and then save it you should see the PO line items populated. You can leave the substitution on or you can remove it after updating,
Regards
K.R

Can it not possible that i can retrive it for all line items in a single qu

I have to make report for my application in which I am facing a following problem:
In the application there are multiple suppliers and each supplier having multiple line items and each item having multipale events. each evant having three status GREEN,RED and BLUE.
When a user select 'all suppliers' to show the the status time span for a supplier (i.e. for a supplier how many parts and upto how much time parts are in blue, red and green status)
to show the cumulative status time span I have to find out a event for each line item which is having nearest lower entry time from the lower part of the given time span.for this i have write following query
SELECT * FROM parts_events
WHERE vendorid = ? AND partid = ?
AND visible = 'visible' AND active = 1
AND entrytime = (SELECT MAX(entrytime) as
entrytime from parts_events
WHERE vendorid = ?
AND partid = ?
AND entrytime < ?
AND visible = 'visible'
AND active = 1)
the problem is that i have to fire this query for each line item, can it not possible that i can retrive it for all line items in a single query?

maybe if you can post some sample data and output will help us analyze more youre requirement.

Free Goods for multiple line items of the same material

Hi Friends,
We have configured Free Goods to a particular material in such a way that if the customer orders 100 qty of Material A then he gets 10 qty of Material B free. This is working fine if there is only one line item of Material A with qty more than 100.
However, if the order is created in such a way that there are two line items of material A for 50 qty each then the system is not giving the free material B, even though the total ordered qty in the sales order for material A is 100.
How can this be configured in the system? Please Help.
Regards,
Abhishek

What is the purpose of giving the same material as second line item.
specify in the first line item itself.
or els the condition record which you have specified that for 100 material of A gives 10 material of B modify it to 10 of A should give 1 material of B
The first you will be useful for you.

Printing of changed line item in scheduling agreement smart form.

Hi experts,
I am facing problem in printing of changed line item in schedule agreement.
can any body tell me how to find the line item has been changed through programming?what is the procedure to fetch the data for new line item.its
very urgent for me.
Please help me in this regard.
Priti Shrivastava

Hi
with the help of T180-TRTYP field you know if that doc has been changed or created.
If it is not equal to H it is changed. H means created.
pass the TCODE of Sched Agreement and check this field.
You can use the CDHDR and CDPOS table s to get the changed values of new item.
Reward points if useful
Regards
Anji
Message was edited by:
Anji Reddy Vangala

GL LINE ITEM DISPAY

Similar Messages

Maybe you are looking for