GL Line Item Report - With Opening Balance c/f

Dear Expert,
There is a requirement from my client to have GL line report which should give opening balance c/f for balance sheet GL.
Account: Bank GL Account.
Period: 15.09.2011 to 18.09.2011
Expected output:
Balance C/F XXXXXX
15.9.2011 .......
16.9.2011........
Closing balance XXXXXX
I checked SAP standard reports but could not able to find.
Is there anyway we can developed these kind of reports from SE71 (Form)?
Thanks & Regards,
Prashant Rane

Hi:
    To develop an ABAPED report you will have to make use of the combined balances from BSIS & BSAS. BAPI_GL_ACC_GETPERIODBALANCES can be used to generate the previous date balance and then carry forward to next date.
Regards

Similar Messages

  • Customer line item report with GL account display

    Hi
    Please guide some customer reports for the following
    Client need a Customer Line item reports with Customer number and repective gl account for each line items.
    for ex: Product A/c xxxxxx
              To Sales A/c xxxxxx(recon A/c)
    Thanks in advance

    Hi
    1.FBL5N -  Customer Line item Display (Customer Line item reports with Customer number )
    2.FBL1N - Vendor Line item Display
    3.FBL3N - General Ledger Line item Display
    The sales entry will be
         DR  Customer - to view this entry FBL5N
               CR Sales - to view this entry FBL3N
    Hope this will be usefull

  • Line item report with Customer number

    Hi all,
    I am facing the following issue:
    I need a line item report to analyze an accrual account by customer.
    Since the customer is not captured on the accrual account itself, but on the recon. account (which is not defined as line item display), I did not find a way to present the customer and the accrual  on the same line.
    I can always go to BSEG and vlookup and match by document number the accrual account and the customers from the customer recon. account, but I thought maybe someone has a better idea.
    Thanks,
    Yoel.

    If the recon account line items have al lthe info needed I'd suggest using a query (SQ01).
    1. Create an Infoset in SQ02 with logical database "BRM". Choose the fields from BSEG that you need
    2. Create the Query in SQ01 using that Infoset.
    If you want to see individual line items, include the fields you want in the "basic list" of the query. If you want totals by customer, don't include anything in the basic list, but make a "statistics" with customer and amount.
    Selections would habe to be made for account no and period.

  • CO/PS Line item reporting with additional fields (vendor number/name)

    Hi
    how i can post PS,cost center and orders commitment line items for below reports
    The SAP standard reports are:
    CJI5 PS Commitment Line items
    KSB2 Cost Centre Commitment Line Items
    KOB1 Orders Actual Line Items
    KOB2 Orders Commitment Line Items.
    give me suggestion for above tr. codes
    Regards
    nreddy

    hi
    I want post line commitment line items for PS,Coscenter and orders for testing reports

  • How to Get the Print of General Ledger with Opening balances

    Hi Friends.
    How can I get the print out of G.Ledger with all line item transactions and opening balances in a company code?
    Please explain.
    Regards.
    Srini

    hi
    for line item-
    goto s_alr_87012282 and select menu bar "list">print
    for g/l statement
    goto s_alr_87012332 same step above
    rgs

  • Asset Balances & Cost Line items Report

    Hi,
    I am looking for a Report which would combine Asset (S_ALR_87011963)balance report and Cost line item Report(CJi3) for Projects.

    Hi,
    The flow is like this ( if u r using timesheets for confirmation):
    CAT2 : Timesheet: Enter Times : User enters the time.
    CATS_APPR_LITE  : Approval of timesheet
    CAT5  : Transfer to Projects.
    This will post cost to Projects.
    Another way of getting the Actual cost is Confirmation using CN25 or CN29.
    Regards,

  • Vendor line item report in New GL

    Hi
    We have activated New GL. We need vendor line item report based on GL view. FBL1n provides report based on entry view. But we need simillar to FBL1n based on GL view. There is a standard report S_AC0_52000888 which provides vendor line item doucment wise with New GL characteristics such as profit center. However, this report does not provide additional information such as posting date, due date et.c which is available in FBL1n. Hence, we are unable to monitor vendor accounts at profit center level.
    Can anyone suggest how to add additional fields in the above report or any other report available for the same.
    Thanks
    S.Radhakrishnan

    hI
    Thanks for the reply.
    As per your suggestion, we need to bring GL view parameters from FAGL* tables. I need clarification here:
    1. In our case, single line item in BSIK may correspond to multiple profit centers and hence multiple line items in FAGL* tables.
    2. Users run the report for multiple vendors ( beig range) with their profit centers as selection criteria.
    3. In the above case, we need to select all the line items for that vendor and go to FAGLFLEXA and select all line items and delete all line items not pertaining to the profit center entered as selection.
    4. The above process would be time consuming since all the open items will be selected and then delete all those items which are not required.
    5. Else, can we select the items from FAGLFLEXA directly for the profit centers entered and bring additional information from BSIK table. Since vendor accounts are not there in FAGLFLEXA, it would be cumbersome and time consuming.
    6. Which of the above approach would you recommend.
    7. Is it possible to modify the ACO report so that we can add additional information such as posting date, due date etc.
    Regards
    S.Radhakrishnan

  • Vendor line item report based on profit centre wise like FAGLL03

    We have profit centre wise GL Line item report i.e FAGLL03.  Is there any such report for vendor line items with profit centre.
    I want to see open items of vendor for a particular profit centre.

    Hi BSR,
    I think there are some 'recherche' reports which should fulfill your needs.
    Please call the transaction FGI0.
    There you got the following folders.
    002 Payables According to General Ledger Account Assignments
      0SAPPAYABL01 Payables per Profit Center
      0SAPPAYABL02 Payables per Segment
    003 Receivables According to General Ledger Account Assignments
      0SAPRECIEV01 Receivables per Profit Center
      0SAPRECIEV02 Receivables per Segment
    These reports should fulfill the need, to display items of vendors
    or customer according to the NewG/L 'splitting criteria'.
    With Best Regards,
    Gladys Xing

  • Sales Order Line item status with Resource Related Billing

    Hi
    The Resource related billing is done based on the costs accumulated on account assigned WBS Element. The WBS Element system status is set 'Finally Billed'. The overall status of Sales Order line item is still 'open' and does show up in 'Open Order' reports.
    SAP vide their note 439288 recommends running report SDVBUK00 to correct the sales Order item status. However this note is applicable only upto 4.6C. Our system in ECC 6.0. We tried running this report and did not get desired results. We checked the program and discovered that the corrections suggested as per above note, are not available.
    Is there any new SAP note applicable for ECC 6.0 needs to be applied ? Or is there any other report needs to be run in case of ECC6.0?
    Thanks in advance
    with regards

    HI,
    Please raise message to SAP through service marketplace.
    Thanks,
    Vrajesh

  • ECC6 - Line item display and Open item management Questions.

    Hi All,
    For SAP ECC6, although I do not maintain line item display and open item management for Recon GL (for Debtor), I still can use FAGLB03 to view the GL balances and even Drill down to line item level by double click the value from FAGLB03 until line item level.
    Questions:
    Could anyone confirm whether my assumption below, true?
    1) If Line item display (Tcode: FS00) is ON, then the data will be stored at table: BSIS
    2) If NO open item management, then there should be no data to be stored at table BSAS for thaty particular GL account
    3) BSAS will only have data, after clearing was carried out ... move from BSIS to BSAS.
    In ECC 6
    4) FAGLB03 can drill down to line item level, although the GL (Tcode: FS00) was NOT set open item management and line item display is because from FAGLB03 when drill down to line item level, it actually extract data from BSEG, right?
    Additionally, we can use FBL3N to check the line item data for NON line item display GL as well.
    In SAP R/3 4.7, if not mistaken, if the GL is NOT line item display and open item management, we cannot drill down the line item reading and CANNOT use FBL3N to check the line item data.
    Kindly advise on these.
    Thanks.
    sbmel

    1) If Line item display (Tcode: FS00) is ON, then the data will be stored at table: BSIS
    BSIS is an open items table. You can see all GL open items there. GL's which are not open item managed can't go here
    2) If NO open item management, then there should be no data to be stored at table BSAS for thaty particular GL account
    Yes. Your understanding is correct
    3) BSAS will only have data, after clearing was carried out ... move from BSIS to BSAS.
    Yes. In case of partial clearing data will be there in both the tables BSIS & BSAS
    4) FAGLB03 can drill down to line item level, although the GL (Tcode: FS00) was NOT set open item management and line item display is because from FAGLB03 when drill down to line item level, it actually extract data from BSEG, right?
    These are New GL reports and report is based on document split object. if your document split is active at segment level then you can see line item report at segment level using FAGLL03. These reports has no link to FS00 settings.
    Hope this helps

  • **URGENT** - Vendor Line Item Reporting

    Dear Gurus,
    Need some “URGENT” help with regards to Vendor Reporting?
    Our business has requested for a Vendor Line Item / header Report, which will display ALL Vendor Items “NET” (before tax).
    At the moment our business it manually taking out Tax in FBL1n (Vendor Line Item Report).
    Please could you kindly let me know if there is ANY report in SAP which displays the Vendor Items NET & GROSS??
    Thanks Very Much
    RICK
    Edited by: Rick Desilva on Apr 22, 2008 4:00 PM

    Hi  Shridhar,
    All I want is a "net column" - Which will display the vendor invocie amount - BEFORE VAT (Tax).
    So on FBL1N or Another SAP-Vendor Report what I need is a
    Net Amount column and a Gross Amount Column.
    I hope this makes sense and someone can assist....
    Thanks & Regards
    RICK
    Edited by: Rick Desilva on Apr 23, 2008 9:36 AM

  • WBS Element on AR/AP Line Item Report

    Hi All
    When I run the FBL1n report for a vendor who has a PO which has a WBS element - I dont see the WBS element coming up on the line item report(s).
    Although the field is there on the layout - it is not picking the WBS Element into the report - can anyone please tell me why this is and how I can get this field to fill with values...
    Thank you
    Rukshana

    hi,
    If you had activated Project Cash Management, you can try report CJIA which can substitute the report line item wise list for a particular project or for a Particular Vendor.
    Why the standard system is not showing WBS because, a single Vendor line can be posted against multiple expense so system cannot determine which WBS to be shown in the report so it is left blank in reports, this will be applicable for Purchase order no, Cost Centers, WBS etc.
    As suggested by Suresh you can use the BTE 1650, but it will keep one WBS in the line even you have multiple WBS elements used for the document posting.
    For Ex
    Expense 1 Dr  1000- WBS 1
    Expense 2 Dr  1000- WBS 2
    Expense 3 Dr  1000- WBS 3
    Vendor A Cr    3000
    Against Vendor line item A - it will show WBS 1 alone.As there is no standard solution you can use BTE if your are satisfied with the above example or you have to activate Project Cash management to find the exact reporting but in different reporting structure.
    Thanks and regards
    Praveen.J

  • Line item report on secondary cost element (cat - 21)

    Hi Gurus,
    Secondary cost element with category 21 is used for internat settlement from order to wbs or wbs to cost center. But can we see line item report on this cost element. Or we cannot see any line item report on this cost element. it is just used for internal settlement purpose.
    Please clear this doubt. thank you

    Hi Mohit,
    I hope you can have line item report @ order and WBS element stright away...
    for orders use: KOB1 transaction code for actual line items, where you have the facility of entering CE or CE group to find the vaues related to particular cost elements in the order. If you are flexible with CEs related to 21, give there otherwise create a CE group specific to 21 category and enter the group and find the results you want.
    same way for WBS elements/projects: we have transaction code CJI3 for actual line items, here also we can enter CE or CE groups
    Not only for actual line items, we have the option of viewing plan line items, budget line items, and commitment line items @ both order and WBS level with different transaction codes other than mentioned above, like KOB2, KOB3, CJI4, CJI2 etc
    I hope it helps a lot if I understand your query right
    Regards..
    Jose

  • Vendor line item reports

    In vendor line item reports I want plant field.
    How can I add this field to my report screen. In my dynamic selections it is not available.
    thanks and regards

    Hi,
    If a field in FBL1N is not filled it might be because the field has to be created as a special field.
    In the Line item Display list in FBL1N follow this menu path: Settings -> Special fields, and add the fields you want from relevant table.
    The fields are later available for display,and you can choose them from the Line item Display list following this menu: Settings -> Display variant -> Current. From the hidden list you can now choose the fields you want to have shown. If the technical name is shown for the fields, the special fields are all starting with '1-U_'. It's important, that you add the Special field, if the field also exist as Standard field.
    The Special fields are shown in the buttom of the Hiddden list.
    Please also read the solution part of note 215798 for some very import- ant steps to be aware of.
    But, for having a field shown in the vendor Line Item Display (FBL1N) the field has to exist in the vendor Line Item. If this is not the case, you will evt. be able to see the field in FBL1N by using Offsetting account info.
    Check if field WERKS is in the structures RFPOS and RFPOSX. If not, then you need to add the field to the structures RFPOS and RFPOSX. When the structures have been extended with the field then you need to run the reports  RFPOSXEXTEND and BALVBUFDEL (in the same way as seen in the solution part in note 215798).
    Please assign points if it useful
    Regards
    Ravinagh Boni

  • VENDOR/GL/CUSTOMER  ACCOUNT STATEMENT WITH OPENING BALANCE

    Can anybody  tell me the tcodes in SAP for Vendor/Gl/Customer Account Statement with opening balance.
    Best Regards,
    Sudhanshu Dang
    0124-3081015

    hii
    As per my knowledge no such reports  for GL are there in sap.. we also had a same requirement but could not find it... we wanted reports with opening and closing balalnces...
    u can go to SAP1 and check all the standard reports available. check wheather any report fulfills ur need or else go for abap reports...
    Check f.42 T code for Vendor Report. and s_alr_87012172..for customer.
    thanks
    sejal

Maybe you are looking for