GL line item report

HI Guru's
when we are running transaction FAGLL03. When selecting Cost Centre within Dynamic Selections, twe are getting the following error message: "Custom selections deleted because fields not active in ledger".
what is the problem?
regards
Sunitha

Hi
check in the field status variant whether ur variant has any field suppressed or put in optional
Regards
Edited by: shibu john on Dec 22, 2008 5:16 PM

Similar Messages

**URGENT** - Vendor Line Item Reporting

Dear Gurus,
Need some URGENT help with regards to Vendor Reporting?
Our business has requested for a Vendor Line Item / header Report, which will display ALL Vendor Items NET (before tax).
At the moment our business it manually taking out Tax in FBL1n (Vendor Line Item Report).
Please could you kindly let me know if there is ANY report in SAP which displays the Vendor Items NET & GROSS??
Thanks Very Much
RICK
Edited by: Rick Desilva on Apr 22, 2008 4:00 PM

Hi Shridhar,
All I want is a "net column" - Which will display the vendor invocie amount - BEFORE VAT (Tax).
So on FBL1N or Another SAP-Vendor Report what I need is a
Net Amount column and a Gross Amount Column.
I hope this makes sense and someone can assist....
Thanks & Regards
RICK
Edited by: Rick Desilva on Apr 23, 2008 9:36 AM

Asset Balances & Cost Line items Report

Hi,
I am looking for a Report which would combine Asset (S_ALR_87011963)balance report and Cost line item Report(CJi3) for Projects.

Hi,
The flow is like this ( if u r using timesheets for confirmation):
CAT2 : Timesheet: Enter Times : User enters the time.
CATS_APPR_LITE : Approval of timesheet
CAT5 : Transfer to Projects.
This will post cost to Projects.
Another way of getting the Actual cost is Confirmation using CN25 or CN29.
Regards,

WBS Element on AR/AP Line Item Report

Hi All
When I run the FBL1n report for a vendor who has a PO which has a WBS element - I dont see the WBS element coming up on the line item report(s).
Although the field is there on the layout - it is not picking the WBS Element into the report - can anyone please tell me why this is and how I can get this field to fill with values...
Thank you
Rukshana

hi,
If you had activated Project Cash Management, you can try report CJIA which can substitute the report line item wise list for a particular project or for a Particular Vendor.
Why the standard system is not showing WBS because, a single Vendor line can be posted against multiple expense so system cannot determine which WBS to be shown in the report so it is left blank in reports, this will be applicable for Purchase order no, Cost Centers, WBS etc.
As suggested by Suresh you can use the BTE 1650, but it will keep one WBS in the line even you have multiple WBS elements used for the document posting.
For Ex
Expense 1 Dr 1000- WBS 1
Expense 2 Dr 1000- WBS 2
Expense 3 Dr 1000- WBS 3
Vendor A Cr 3000
Against Vendor line item A - it will show WBS 1 alone.As there is no standard solution you can use BTE if your are satisfied with the above example or you have to activate Project Cash management to find the exact reporting but in different reporting structure.
Thanks and regards
Praveen.J

AP Line-Item Report for State Auditors

Dear Members,
I am preparing one Report named AP Line-Item Report for State Auditors and i need the following fields in my report.
Check Number                PAYR-CHECT
Voucher Number             BSEG-BELNR
Check Date                     PAYR-ZALDT
Voucher Date                     BKPF-BUDAT
Vendor Number             LFA1-LIFNR
Vendor Name                     ADRC-NAME1
Vendor Street Address     ADRC-STREET
Vendor City                     ADRC-CITY1
Vendor State                     ADRC-REGIO
Vendor Zip Code             ADRC-POST_CODE1
General Ledger Acct No     BSEG-HKONT
Purchase Order Number     BSEG-EBELN
Tax Status Code             BSEG-MWSKZ
Taxable Amount             BSEG-HWBAS
Exempt Amount             BSEG-MWSTS
Tax                                     BSEG-MWSTS
Tax Accrued                     BSEG-MWSTS
Total Invoice                      BSEG-DMBTR
I am new to FI.So I request some one please let me know which datasources contain the above fields and which CUBE is best suited for this.
Thanks in Advance for help and quick reply is much much appreciated.
Best Regards
RC

0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

COPA line item report, Number format -output type - object list(ALV).

Hi,
I am preparing COPA line item report. I want to change number format (two decimal place). I did the changes in form level then I did the changes in drill down report as well and saved as save definition.
But changes are not reflecting in- output type - object list(ALV).
Please provide help in this.
Regards

HI
What t-code you are using to write this line item report ?

Line item report on secondary cost element (cat - 21)

Hi Gurus,
Secondary cost element with category 21 is used for internat settlement from order to wbs or wbs to cost center. But can we see line item report on this cost element. Or we cannot see any line item report on this cost element. it is just used for internal settlement purpose.
Please clear this doubt. thank you

Hi Mohit,
I hope you can have line item report @ order and WBS element stright away...
for orders use: KOB1 transaction code for actual line items, where you have the facility of entering CE or CE group to find the vaues related to particular cost elements in the order. If you are flexible with CEs related to 21, give there otherwise create a CE group specific to 21 category and enter the group and find the results you want.
same way for WBS elements/projects: we have transaction code CJI3 for actual line items, here also we can enter CE or CE groups
Not only for actual line items, we have the option of viewing plan line items, budget line items, and commitment line items @ both order and WBS level with different transaction codes other than mentioned above, like KOB2, KOB3, CJI4, CJI2 etc
I hope it helps a lot if I understand your query right
Regards..
Jose

Line item report with Customer number

Hi all,
I am facing the following issue:
I need a line item report to analyze an accrual account by customer.
Since the customer is not captured on the accrual account itself, but on the recon. account (which is not defined as line item display), I did not find a way to present the customer and the accrual on the same line.
I can always go to BSEG and vlookup and match by document number the accrual account and the customers from the customer recon. account, but I thought maybe someone has a better idea.
Thanks,
Yoel.

If the recon account line items have al lthe info needed I'd suggest using a query (SQ01).
1. Create an Infoset in SQ02 with logical database "BRM". Choose the fields from BSEG that you need
2. Create the Query in SQ01 using that Infoset.
If you want to see individual line items, include the fields you want in the "basic list" of the query. If you want totals by customer, don't include anything in the basic list, but make a "statistics" with customer and amount.
Selections would habe to be made for account no and period.

Create AP/AR line item report for parked items

Dear all,
Has anyone been able to create a line item report in AP or AR that includes parked items? I have created an aging report using standard 0SAPDUEAN-01 as a base, using report painter. Now the Finance department want to be able to see the numbers of the parked invoices as well but I am not able to find a way to pull these.
Does anyone know if this is actually possible?
many thanks

Hi,
by using of TCODE. FBV3 it is displaying parked documents
based on document type.
K.Satish

SKF line item report

Hi,
What is the t.code to see SKF line item report
Bye,
Ramesh

Hi,
I an the report the total value are appearing and when i am selecting the actual line items the message is "Assign a receiver report to the report". What should i do?
Bye,
Ramesh

Vendor line item report in New GL

Hi
We have activated New GL. We need vendor line item report based on GL view. FBL1n provides report based on entry view. But we need simillar to FBL1n based on GL view. There is a standard report S_AC0_52000888 which provides vendor line item doucment wise with New GL characteristics such as profit center. However, this report does not provide additional information such as posting date, due date et.c which is available in FBL1n. Hence, we are unable to monitor vendor accounts at profit center level.
Can anyone suggest how to add additional fields in the above report or any other report available for the same.
Thanks
S.Radhakrishnan

hI
Thanks for the reply.
As per your suggestion, we need to bring GL view parameters from FAGL* tables. I need clarification here:
1. In our case, single line item in BSIK may correspond to multiple profit centers and hence multiple line items in FAGL* tables.
2. Users run the report for multiple vendors ( beig range) with their profit centers as selection criteria.
3. In the above case, we need to select all the line items for that vendor and go to FAGLFLEXA and select all line items and delete all line items not pertaining to the profit center entered as selection.
4. The above process would be time consuming since all the open items will be selected and then delete all those items which are not required.
5. Else, can we select the items from FAGLFLEXA directly for the profit centers entered and bring additional information from BSIK table. Since vendor accounts are not there in FAGLFLEXA, it would be cumbersome and time consuming.
6. Which of the above approach would you recommend.
7. Is it possible to modify the ACO report so that we can add additional information such as posting date, due date etc.
Regards
S.Radhakrishnan

Vendor line item reports

In vendor line item reports I want plant field.
How can I add this field to my report screen. In my dynamic selections it is not available.
thanks and regards

Hi,
If a field in FBL1N is not filled it might be because the field has to be created as a special field.
In the Line item Display list in FBL1N follow this menu path: Settings -> Special fields, and add the fields you want from relevant table.
The fields are later available for display,and you can choose them from the Line item Display list following this menu: Settings -> Display variant -> Current. From the hidden list you can now choose the fields you want to have shown. If the technical name is shown for the fields, the special fields are all starting with '1-U_'. It's important, that you add the Special field, if the field also exist as Standard field.
The Special fields are shown in the buttom of the Hiddden list.
Please also read the solution part of note 215798 for some very import- ant steps to be aware of.
But, for having a field shown in the vendor Line Item Display (FBL1N) the field has to exist in the vendor Line Item. If this is not the case, you will evt. be able to see the field in FBL1N by using Offsetting account info.
Check if field WERKS is in the structures RFPOS and RFPOSX. If not, then you need to add the field to the structures RFPOS and RFPOSX. When the structures have been extended with the field then you need to run the reports RFPOSXEXTEND and BALVBUFDEL (in the same way as seen in the solution part in note 215798).
Please assign points if it useful
Regards
Ravinagh Boni

Customer line item report with GL account display

Hi
Please guide some customer reports for the following
Client need a Customer Line item reports with Customer number and repective gl account for each line items.
for ex: Product A/c xxxxxx
          To Sales A/c xxxxxx(recon A/c)
Thanks in advance

Hi
1.FBL5N - Customer Line item Display (Customer Line item reports with Customer number )
2.FBL1N - Vendor Line item Display
3.FBL3N - General Ledger Line item Display
The sales entry will be
     DR Customer - to view this entry FBL5N
           CR Sales - to view this entry FBL3N
Hope this will be usefull

KE24 line item report ( profitability line item report)

Hi all,
we need sub total sale order wise automatically in KE24 line item report ( profitability line item report) . How can i do for this .
could you please help me.
Regards,
K.Satish
[email protected]

Hi,
Please forward the same to my mail id:[email protected]
Thanks in advance.
Regards,
Prasad

Profit center line item report

Hello All,
A sales order is created with reference to a service order, now when I see Profit center line items, the function area available in Service order is differ from the function area displaying with sales document number in profit center line item report. Can anyone please tell me where could be the problem.
Full points will be awarded for the answer.
Thanks & Regards
Srini

Hi,
what SAP release do you have ?
Normally the derivation of the functional area is made with the following logic:
1) manually entered
2) FI-Substitution (calling point 5 or 6 since ERP2004)
3) cost center
4) cost element
Please see also SAP note 106180 of how to correct wrong functional areas in PCA.
Best regards,
Andreas

How to add the line item text in the Ledger line item report

Hi SAP Gurus,
I having one requirement from the user. He wants the line item text which we will enter in FB60/FB70/FB50 has to be shown in the Ledger line item report. Right now this field is not available. Is there any possible we can make this line item text in the ledger line item report i.e. FBL1N/FBL3N/FBL5N?
advance thanks for the help.
Regards,
Deva.

Hi,
You can do the below to get this. (You can change the names of the function modules as per your wish/ organization naming convention):-
Step 1:-
Create function module Z_GET_SGTXT as below:-
Import:-
BELNR LIKE BKPF-BELNR
BUKRS LIKE BKPF-BUKRS
BUZEI LIKE BSEG-BUZEI
GJAHR LIKE BKPF-GJAHR
Export:-
PRCTR LIKE BSEG-SGTXT
FUNCTION Z_GET_SGTXT.
""Local Interface:
*" IMPORTING
*" VALUE(BELNR) LIKE BKPF-BELNR
*" VALUE(BUKRS) LIKE BKPF-BUKRS
*" VALUE(BUZEI) LIKE BSEG-BUZEI
*" VALUE(GJAHR) LIKE BKPF-GJAHR
*" EXPORTING
*" VALUE(SGTXT) LIKE BSEG-SGTXT
SELECT SINGLE SGTXT FROM BSEG INTO SGTXT WHERE GJAHR = GJAHR
AND BELNR = BELNR
AND BUKRS = BUKRS
AND BUZEI = BUZEI.
ENDFUNCTION.
Step 2:-
Then create the Function Modules as below:-
Z_LINE_ITEMS_GET_SGTXT (Copy of SAMPLE_INTERFACE_00001650)
FUNCTION Module Z_LINE_ITEMS_GET_SGTXT.
""Local Interface:
*" IMPORTING
*" VALUE(I_POSTAB) LIKE RFPOS STRUCTURE RFPOS
*" EXPORTING
*" VALUE(E_POSTAB) LIKE RFPOS STRUCTURE RFPOS
Initialize Output by using the following line
E_POSTAB = I_POSTAB.
E_POSTAB = I_POSTAB. "<-- important
CALL FUNCTION 'Z_GET_SGTXT'
EXPORTING
BELNR = I_POSTAB-BELNR
BUKRS = I_POSTAB-BUKRS
BUZEI = I_POSTAB-BUZEI
GJAHR = I_POSTAB-GJAHR
IMPORTING
SGTXT = E_POSTAB-SGTXT
EXCEPTIONS
OTHERS = 1.
ENDFUNCTION.
Step3:-
Transaction FIBF:-
Settings -> Products -> of a Customer
SGTXT Text in Line Item Display Active
Settings -> P/S Module -> of a Customer
00001650 SGTXT Z_LINE_ITEMS_GET_SGTXT
Step 4:-
Create the layout for FBL*N with display of the TEXT.
Regards,
Gaurav

GL line item report

Similar Messages

Maybe you are looking for