GL_LOCAL

When I am trying to post document I am getting error message "GL_LOCAL number range interval 01 does not exist".
What is config setting and what I need to do pl give me T.code where I need to modification.

Hi define number ranges for document type sa other wise sytem cannot acces the postings first u can done this thru fbn1 or oba7

Similar Messages

  • Error-For object GL_LOCAL GBU1, number range interval  does not exist

    Hello experts
    I attempted to post a JVA cash call in GJ01 and I encountered the following error. It does not state what number range interval is missing and that is my issue. I checked the number range interval for local ranges and it exists, both for years 9999 and 2015.  I have checked the number ranges for each document type to make sure that they exist. I did not receive any conflict in the number ranges assigned to various document types. I had read somewhere that this could be related to non-leading ledgers and I am no FI expert. What could be the problem and how can I resolve this issue?. I am looking for your help and guidance.
    Please see the attached screenshots.
    Thank you.

    Hi Rahul
    Thank you for your response and help. I am actually in DEV and although it says something like transporting the interval and making note of any message, the Transport option is greyed.  So, I just executed tcode GB02 and went straight to Interval --> transport.
    Even after tcode GB02, Interval --> Transport, I received the same error while trying to post a transaction.

  • Assessment: number range problem

    Hi Fi-CO gurus's,
    my problem is the following: I try to perform an assessment (Tx code 3KE5), but I receive an error message in the "display EC-PCA: Actual assessment basic list  " screen:
    Document number: range not found
    And further:
    Document number: range not found
    Message no. GA703
    Diagnosis
    An error occurred during document number determination. No range was found for number range object GL_LOCAL, sub-object 0010.
    System Response
    No document number was determined. Results could not be updated.
    Procedure
    Inform the person in charge of number ranges.
    Could anyone help me.
    Thanks in advance.
    Ric.

    Hi Seth,
    I checked out table NRIV and found entry....
    But in GB02 I have the following problem:
    when I try to create an interval for the group  (group maintenance) I choose "Act. document from direct posting with GB0" ...
    There is no displayed number range and when I try to create it, it is not possible because there is already an existing number range, but it can't activate it...
    An it takes all the available range (from 000000000 to 9999999999)
    Regards.
    Ric

  • 4KE5-Actual Distribution for Profit center

    I am facing the below error when I execute the 4KE5 for profit center actual distribution. I have maintained the number range but still the same error is there. I defined number range for Document type OC for year 2008.
    please advise how to overcome?
    "Document number: range not found
    Message no. GA703
    Diagnosis
    An error occurred during document number determination. No range was found for number range object GL_LOCAL, sub-object TTSL.
    System Response
    No document number was determined. Results could not be updated.
    Procedure
    Inform the person in charge of number ranges."

    When you enter GB02, Click on the Overview icon (Shift +F7)
    You should be able to see
    Subobject  Element           Year             From No.               To No.            NR Status
    $$$$                                                         2008                    1           9999999999                   0
                     A0
    where $$$$ is your company code, 2008 or 2009 is the year for which you want the number range, along with the document type (AO)
    If you cannot see this, then you have not assigned the Number Range to that document type.
    Regards,
    Sangeeta
    Edited by: Sangeeta on Apr 8, 2009 4:57 PM

  • ERROR IN NUMBER RANGE when doing profit center distribution

    hi
       iam getting this error while doing distribution in profit center accounting , can anyone help me with this
    ERROR:
    Diagnosis
    An error occurred during document number determination. No range was found for number range object GL_LOCAL, sub-object AUS2.
    System Response
    No document number was determined. Results could not be updated.

    follow steps below:
    1.  go to tcode snro
    2.  input GL_LOCAL in the object field
    3.  push "number ranges" button
    4.  push "Groups"(maintain) button
    5.  select "V0" group, since I use Document type 'V0' during PCA distribution
    6. push 'change' button
    7. insert the year you want

  • External Table to Internal table Data update query

    Hi all ,
    I have Follwoing 2 tables one is external oracle and 2nd is internal and both table have the same data as following this is sample data while actual table contains millions of record.
    External Table name SE2_EXT
            GL_REF_NO     GL_CUST_ID     GL_TRAN_AMT_LCY     GL_REVERSAL_MARKER     GL_GL_ID     GL_LOCAL
    1     5          513557               100               136340003678088.020001     
    2     5          513557               -100          R     136340003678088.020002     
    3     1          26               -685.12               136340003674772.030001     
    4     1          26               685.12          R     136340003674772.030002     
    5     4          500539               100               136340003477900.000001     
    6     4          500539               -100          R     136340003477900.000002     
    7     23          604612               182.15               136340003578165.170001     
    8     23          604612               -182.15          R     136340003578165.170002     
    9     76          232033               -230.7               136340003576922.100001     
    10     76          232033               235.7          R     136340003576957.010001     I want to update GL_LOCAL column with 'R' with conditions that if
    WHERE GL2.GL_GL_ID=GL2_EXT.GL_GL_ID
      AND GL2.GL_REF_NO=GL2_EXT.GL_REF_NO
      AND GL2.GL_CUST_ID=GL2_EXT.GL_CUST_ID
      AND GL2.GL_REVERSAL_MARKER IN ('R',NULL)
      AND GL2.GL_TRAN_AMT_LCY=GL2_EXT.GL_TRAN_AMT_LCYbut the tricky thing is GL_TRAN_AMT is one time - (minus) and one time +(plus). I only want to update those record who have same TRAN_AMT_LCY with same other condition mentioned above.
    I tried merj statement but it did'nt work.If any body help me i would be appriciated.
    MERGE INTO SE2 A
    USING ( SELECT GL_REF_NO,GL_CUST_ID,GL_TRAN_AMT_LCY,GL_REVERSAL_MARKER,GL_GL_ID FROM GL2_EXT) B
    ON (A.GL_GL_ID=B.GL_GL_ID AND A.GL_CUST_ID=B.GL_CUST_ID)
    WHEN MATCHED THEN
    UPDATE
    SET A.GL_LOCAL_A1=B.SE_LOCAL

    Why is it tricky? You did not say.
    Making a guess as to the problem why not use TO_NUMBER to cast the string?

Maybe you are looking for

  • GT overclocking in bios (Z68A-GD55(G3)), what does it do??

    Hello people, I read the friggin manual five times now and googled my back off, but nobody seems to know what it does. After flashing with the latest beta .N49, the official one that was released after this one, .N40, somehow vanished from MSI websit

  • Printing problem with Photoshop cs4, need help

    I'm using PS CS4, with a Canon Pixma iP4200 and Mac os 10.6.2.  I CAN print from other programs such as TextEdit or Pages.  And my printer prints a test page without any problems.  However, when I try to print something from PhotoShop, the printer di

  • Importing XML files into FCP 6

    I recorded some footage using a Panasonic P2camera. I sent the files across to my media drive using fire wire but when I try to import the XML files from my media drive into FCP it tells me: *Please choose a translation document file*. Do I need a dr

  • Scrollbar problem with JTable.

    Hi, I have 45 columns in a JTable. Please remember this is customize, we can change the number of columns dynamically, at max they can be 2 columns. i was having a problem with display the columns names in my Frame. I posted at http://forum.java.sun.

  • Prevent cross-scripting from the same domain

    Hello, i have 2 swf files, example1.swf and example2.swf, both on the same domain. I load example2 in a Loader control (Flex) from example1. I want to prevent example2 from accessing (cross-scripting actionscript) example1. It seems that it can't be