GL Open Item does not appear in F-03

Hi Friends,
I am trying to clear the GL open items thru F-03, while I see all the open items that appear in Line item display through FBL3N (total 25), out of them only 24 appear in F-03, I can not see the 25th item.
I have checked the document in BSIS table, it appears as open item there. The FBL3N also shows this open item.
What could be the reason that when going for Clearing thru F-03, it does not appear.
Best Regards
VK

- Check some table fields in the missing documents using Transaction SE16. The following conditions must exist for the missing document numbers in question -
BSIS-XOPVW = X (Indicator: Open item management, only for G/L accounts)
BSEG-XOPVW = X (Indicator: Open item management)
BSEG-AUGBL = space (clearing document number)
BSEG-DISBN = space (discount document number)
BKPF-BSTAT = space (document status)
BKPF-XSTOV = space (indicator reversal flag)
REGUS/REGUP -> see below
- Check Note 136754 - F-03, F-32, F-44, F-28 missing open items (link below)
[Note 136754 - F-03, F-32, F-44, F-28 missing open items|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=136754]
Rgds.

Similar Messages

Custom item does not appear on Hotsync Menu

I have a Sprint Treo 700p. My work email was converted to Outlook from GroupWise. I am able to sync successfully, but received a message about changing profiles and conduits. I tried to do this by clicking the Hotsync icon in system tray. The menu that appeared only had three items (Settings, Install, Exit). The CUSTOM item does not appear. I am using Hotsync Manager 7.0.2. How can I get back the CUSTOM menu item?
Thanks in Advance,
Corey
Post relates to: Treo 700p (Sprint)

Those Hotsync options are what display on Palm Desktop 6.2.2, not prior versions 4.x.
To get to your Hotsync settings, click the Hotsync icon, and select Settings. Then click Applications. Select the conduit you wish to change, and click Configure.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

"Hyperion" menu item does not appear in Excel after SmartView Installation

Hi to all! When I first installed SmartView, everything was ok - "Hyperion" menu item appeared in Excel and I successfully established connection to Planning and worked with data in Excel. Then, once upon a time I happened to select all data through Ctrl+A in the data form open in Excel and tried to copy it to another worksheet in the same workbook, Excel threw out a message about some serious error and informed me that the Hyperion Add-on would be removed. So it was removed in fact. When I was reinstalling Smart-View, all the installation went smoothly but the "Hyperion" menu item did not appear in Excel again. I tried to reinstall both Excel and SmartView and rebooted the system several times but the Hyperion menu item still does not appear in Excel. Can anyone hint me on how to solve this? Thanks a lot in advance!

Hi, John! Thanks a lot! Your link led me to the thread in which the last post had the link Re: Smart View errors in Excel?! containing the "low-tech" 's instructions. It was these instructions that pulled me from underwater! Thank you so much and to that guy too! :)

Open in does not appear

I just downloaded the reader app and tried to put an email in the reader. When I tapped on the appropriate icon the open in did not appear on the list in the window that opened.
What do I do?

Just to be clear though, the Reader does support opening PDF attachments from email. If this is what you are trying to do, you may need to try a long press on the attachment.

In the networking window the Computer item does not appear

I have network sharing turned on but the Computer category does not appear in the networking window. Any ideas how to add this category to the network window in windows 8.1?????

Mfrakes,
It’s possible that you’re not seeing the computer category simply because there aren’t any computers to list.
Make sure that the computers you’re expecting to see are powered on and connected to your network.
Another thing to ensure is that network discovery is enabled.
In order to enable network discovery in Windows 8.1, start by right-clicking on the Network system icon in the taskbar notification area, then click on Open Network and Sharing Center.
Next, in the left pane of the Network and Sharing Center window, click on the Change advanced sharing settings link.
The next window that comes up will give you the option of turning network discovery on.
I hope this helps!
Mike
Windows Outreach Team – IT Pro

Calendar item does not appear in day view for Sunday August 1, 2010

I have a strange problem. I have an appointment on Sunday August 1, 2010. When in day view, and move from Saturday July 31 to Sunday Augsust 1 the appointment does not appear. However, if you look at list view or month view, it is there. If you continue to Monday and then go back to Sunday (all in day view) it appears. There is another person in my office with the exact same problem, so I know it is not just my phone. Anyone else have this issue? Any fix? I am concerned about appointments I will miss because of this. I added appoinments directly into the phone, no server, no exchange, no sync, same problem. It appears to be a bug in OS4.

Refer following link for understanding & solution:
Accounting document not posted from billing document SD module
Hopefully this can assist you.
Thanks & Regards
JP

Work Item does not appear in Inbox

Hello Everybody!
I started a workflow normally, but the workitem does not appear in inbox! (It's a DECISION task) The notification appears normally...
I already looked the SU01 user parameters and WF_BATCH parameters, apparently is all right, but I can't see the workitem.
Anybody already had a problem like that???
Tks,
Marcos Munhós
Edited by: Marcos Antonio Munhós on Nov 11, 2008 5:40 PM

Tabela:         SWWORGTASK
                                                                                CLIENT WI_ID          ORG_OBJ        TASK_OBJ       NO_SEL FORWARD
100    000000122053   USABAP2        TS00008267
   100    000000122053   USABAP3        TS00008267
   100    000000122053   USABAP5        TS00008267
Tabela:         SWWUSERWI
                                                                                MANDT USER_ID        WI_ID          TASK_OBJ   NO_SEL NO_EXECUTE FORWARD
100   ABAP2          000000122053   TS00008267
   100   ABAP3          000000122053   TS00008267
   100   ABAP5          000000122053   TS00008267
I'm have all the Logins and from ABAP2, ABAP3 and ABAP5.
Can be this a problems caused by a Support Pachage???
This is a TEST client and was working until 3 months ago.

Adobe open as does not appear

I have adobe on my iPad and iPhone but the open-as does not have adobe as a choice - why?

Visit http://forums.adobe.com/message/5451137#5451137
Might solve your problem.
-Charu

Why PO Item does not appear when return GR?

Dear Gurus,
The scenerio is,
A standard PO with 30 items.
The PO is released and complete received by MB01 103, 105.
When return GR by MIGO GR 122, the PO items do not appear except one item. If use MB01, the same.
Why? Pls advice. Thanks.
Regards,
David

Just found a good OSS note: Note 886735 - MIGO: Unclear why GR is not possible for the purchase order
It has a report attached, that helps to analyse the reason.
Carry out the following checks using the report:
1. Check the document category
Information: The document category 'F' is possible for purchase orders and the document category 'L' is possible for scheduling agreements.
2. Check that the purchase order/scheduling agreement is not deleted.
3. Check that the purchase order/scheduling agreement is not blocked.
4. Check whether the purchase order/scheduling agreement is released.
5. Check that the purchase order is not held.
6. Check whether the goods receipt is already posted.
7. Is there a purchase order for external service?
8. Is there a blanket purchase order?
9. Is there a text item?
10. Is there a statistical item?
11. Is the goods receipt indicator set in the purchase order/scheduling agreement?
12. Check whether the confirmation control is active and whether a confirmation is still not available.
13. Is there a valid scheduling agreement delivery schedule line?

All open items are not appearing in f-44 for vendor

Hi friends,
I am unable to find all open items in f-44 to clear vendor open items.
I checked in BSIK, it has 3 line items and in FBL1N also having 3 line items.
2 line items are debit and 1 line item is cr.
Dr line items are appearing in f-44 where are Cr (Vendor cr (31) is not appearing in f-44,
Please help me.
Regards,
suresh

Halo,
one of the document might be stuck in APP run.I mean proposal run.
Regards,
Praveen R Marati

Itunes installed open but does not appear.

Everytime i try to open my itunes, nothing appears on the screen. It says that my itunes is already open but there is nothing on my screen or on my taskbar that relates to itunes. I have uninstalled and reinstalled itunes but it seems that its not working at all. My ipod still charge when i connect it to my computer but my itunes just wont appear.Its really frustrating.Someone help me please!??

Everytime i try to open my itunes, nothing appears on the screen. It says that my itunes is already open but there is nothing on my screen or on my taskbar that relates to itunes.
some preliminary questions aimed at narrowing in on possible culprits.
(1) do you have Norton Internet Security 2005 installed on the PC?
(2) try launching your QuickTime. does it:
(a) launch perfectly fine?
(b) fail to launch with an error message? (if so, what does it say?)
(c) exhibit other peculiar behavior? (if so, could you describe it for us?)
(3) reboot the PC. bring up your Task Manager, and click on the "Processes" tab. now try to launch itunes again.
does an "itunes.exe" process appear in the Processes tab? if so, does it persist in there or does it disappear after a few seconds?

Vendors open items are not appearing in clearing

Hi All,
I am able to see 10 open items in FBL1N (Vendors' open Item), but when try to post the outgoing payment through manual clearing, it displays only 6 open items. This is happening for very few vendors.
Please help me to get rid of this problem.
Thanks
Manish

Hi Manish,
Please check that the payment is scheduled in the APP. If it is there, then you can not see those line items while trying to do manual clearing/ payment.
You can delete the particular payment from Payment Proposal and only after that you would be able to see those specific line itmes in manual outgoing payment.
Thanks

ITunes opens but does not appear on desktop?

When I open iTunes by dbl clk on the icon, the graphic equalizer pops up on the screen, and if I right click the icon, it will play recent music from that menu. But...iiTunes does not show up on my screen. I hear the music (garbled) but cannot find iTunes. I have the 11.1.5 version and 10.9.2 OSX on a iMac24. It may be coincidental but, it showed up fine til I recently went to Mavericks. What should I look for to solve this?

Hello tscacro
Start with going to the drop down menu, Window > iTunes to see if it pops up the iTunes window so you can view your music again. If that does not work, then download and reinstall iTunes.
OS X Mavericks: Reinstall apps that came with your Mac
http://support.apple.com/kb/PH14193
iTunes 11.1.5
http://support.apple.com/kb/dl1614
Regards,
-Norm G.

Sales Order Items does not appear in MD04 after BAPI_SALESORDER_CHANGE

Hi Gurus,
I have this scenario.
1)Create sales order with 3 items.
2)Check in MD04. All items are there.
3)Assign reason for rejection for all the items.
4)Use BAPI_SALESORDER_CHANGE to remove the reason for rejection.
5)Only the first item can be shown in MD04.
Do you have any idea how can #5 happen?
Thanks and Best regards,
Andre

Thanks for the replies.
@ A.L.V Ramana,
Yes they all have confirmed qty. The one thing I noticed is that only the first item is being saved to table VBBE from which MD04 is getting sa sales documents. Is there any condition that must be met in order for this table to be filled except that if the item has reason for rejection or does not have confirmed qty?
@ Anirudh.vb
Thanks for the suggestion but the users wants a real time update on MD04.
Best regards,
Andre

When downloading a file, "open" option does not appears, only "save" does

Before updating to 5.0, when downloading a file, I could select between "Open" and "save". Now I don't have the "Open" option. I need it because of my work and is a must have or it will take to much time to save and then opening them. In normal morning with "open" option took me like 30 minutes. Now it took me 1.5 hours and can't afford to loose that much time.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
A possible cause is that the server sends a wrong response header.
The server may not comply to RFC 5987 and sends a wrong Content-Disposition:attachment; filename header.
* https://developer.mozilla.org/en/Firefox_8_for_developers#Network

GL Open Item does not appear in F-03

Similar Messages

Maybe you are looking for