GL Text missing in Report Painter after upgrade to ECC 6.0

Hi SAP FICO Gurus,
We upgraded our system from 4.7 to ECC 6.0 and some of the report painter reports are not displaying the GL Account description in the reports. Instead of the GL Text the report shows the GL Account number with preceding Zeros.
Please suggest me what I am missing. I tried searching the forums but no success.
Thanks in Advance,
Nitin.

Applied OSS Note 360096 and it worked. Thanks for all your help.

Similar Messages

  • Will my friend be able to use voice to text on her iphone 4 after upgrading to IOS 5?

    My friend thought she would have the ability to use voice to text message on her 4 after upgrading to IOS 5.  Will she be able to?

    Please use the confidential forums created for this purpose:
    iOS 5 beta

  • How to include variable in the text column in report painter?

    Dear Expert,
    Would like to seek for your help to include How to include variable in the text column in report painter?Please advice.
    Thank you.
    Regards,
    Karen
    Edited by: Karen Swee Ping Ho on Jun 17, 2011 2:48 AM

    Hi,
    Thank you for the promt reply.
    1) How I include the variable in the column header to display fiscal year which I have selected from the selection screen?
    which variable should i use?
    2) Where can i find more information about the characteristic and which variable to be use base on the characteristic?
    For example: I would like to display the fiscal year from the selection screen/input screen when execute the report which also will reflected to the element definition and will display the fiscal year also in the column text?
    3) Kindly advise base on question 2, the variable that i use in element definition it will also display  in selection screen?
    4) When execute the report the first selection screen input parameter it obtain from where it is from element definition?
    5) Please advice how to be done when report execute with first screen input selection will also reflect the element definition of column and rom with the selection of the fiscal year?
    Please help.
    many thanks
    Edited by: KH on Jun 18, 2011 7:18 AM

  • ERROR MESSAGE IN PPOME TCODE AFTER UPGRADE TO ECC 6.0

    Hi Experts,
    I have a question.
    Recently our system went for upgrade and during testing phase we have found one issue.
    Error message is appearing in PPOME transactio code after upgrade to ECC 6.0
    The screen is getting defaulted to Budget section and unable to find the subtype as there are no subtypes available there and showing error message as "Fill in all required fields".
    Please let me know your solution on this.
    Regards,
    Sekhar.

    Hi,
    - you can deactivate the budget tab in the IMG-activity 'Hide/Show Tab Page'
    (SIMG_CFMENUOHP1HFW20 alternatively use SM30 on view 'T77OCTABUS')
    1. Create new entries for the following KEY:
    a) Scenario OME0
    b) Object type 'P', 'O', 'S'
    c) Tab Page 'PBC_ORIG'
    2. for each of this entries, set the 'Exclude Tab Page'-Flag.
    - in case you do not want to deactivate the Budget tab:
    The error occurs due to missing entries for subtypes in table T778U
    for infotype 1516.
    Please maintain the according subtyes you want to use if you create a
    budget.
    Regards,
    Ana

  • Barcode doesn't work after upgrade to ECC

    Hi All,
    In sapscript, we used bardcode. But after upgrade to ECC, it doesn't work.
    Could you help me about it??
    And we don't want to convert the sapscript to smartforms and use the new barcode technique.
    Looking forward you help!!
    Thanks & Best Regards,

    Hi ,
    I think some function moule is missed, please check the driver program also. In production you are getting Barcodes ?. Or otherwise goto se73 - we have bar codes types.. system and printer barcodes . please assign the printer bar codes in output devices.
    Best Regards,
    Narasimha Rao.

  • Special Characters in Packed Field After Upgradation from ECC 5 to ECC 6

    Hi All,
    After Upgraded from ECC 5 to ECC 6, we are getting error as 'Packed field contains incorrect BCD format'.
    I found the error in below code..
    CALL METHOD cl_abap_container_utilities=>read_container_c
          EXPORTING
            im_container           = j_2iextrct-extrctdata
          IMPORTING
            ex_value               = i_rg23part2-i_part2_typ
          EXCEPTIONS
            illegal_parameter_type = 1
            OTHERS                 = 2.
    i_rg23part2-i_part2_typ-EXAED = 0.<0
    i_rg23part2-i_part2_typ-CESS   = 0.<0
    for some packed fields special characters are appearing, which leads to a short dump.
    Any Suggestions.....
    Thanks,
    Satish Reddy.
    Edited by: Sathish Reddy on Jun 25, 2010 4:49 PM
    Edited by: Sathish Reddy on Jun 26, 2010 11:01 AM
    Edited by: Sathish Reddy on Jun 29, 2010 12:58 PM
    Edited by: Sathish Reddy on Jun 30, 2010 11:51 AM

    HELLO,
    Search the form you will get few links.
    Also many companies have gone technical upgradation , but not functional upgradation.
    Thanks
    RK

  • Statistical-relevent delivery date not showing up in PO after upgrad to ECC

    Hi Gurus,
    After upgrade to ECC, Statistical-relevant delivery date (PO Item details --> delivery schedule tab) is not showing up when I convert PR to PO from Stock requirements list(MDO7).
    Could you please help me out this issue.

    Maintain the item category in your material master at sales organisation level and try again.
    Also Please Check the delivery item category determination in trxn code 0184 there you define which item category is to be found for the combination of delivery type NL and item category group.
    Regards,
    Ashok
    Edited by: Ashok Kumar Telikula on Aug 27, 2008 2:35 PM

  • Text in Rows - Report Painter

    Hi Gurus,
    I´m making a FI report using report painter tool. I´ve a issue with text in rows. In this report, I´ve to show all values when Trading Partner is filling and when is empty.
    I´ve created a set of Trading Partner values, but in this i can´t enter blank values and therefore if I use on report this set, I can´t see values when Trading Parnter is empty. In this case I´ve been seeing Trading Partner text.
    By other hand, if I deselect this set and I select to see all Trading Partner values, including Trading Partner empty values, I can´t see Trading Partner text. For example: If my Trading Partner is XX and my Text YY, in my rows I should be:
    XX   YY
    But in my report I´m saying
    XX   XX
    And I can´t see text of Trading Parnter characteristic.
    Any of you know how can I obtain text in report painter rows?
    Kr

    Never heard of this. Particularly interesting is that this happens after a few days? Weird. But let's trow SP1 at this and see:
    https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Reporting Error After Upgrading to SCCM 2012 R2

    After upgrading from SCCM 2012 SP1 CU2 to SCCM 2012 R2, some users receive an error whenever they open a report.  This occurs in both the SCCM console and the SSRS web site.  What's odd is not all users receive the error.  In fact, for two
    users with the exact same permissions, running the console on the same computer, 1 gets the error and the other doesn't.  Anybody else see this or have any ideas to troubleshoot or fix it?  I'm thinking this may relate to the fix for permissions
    in reporting included in R2.
    The error message from the console is:Microsoft.Reporting.WinForms.ReportServerException
    The DefaultValue expression for the report parameter ‘UserSIDs’ contains an error: The user name or password is incorrect.
    (rsRuntimeErrorInExpression)
    Stack Trace:
    at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
    at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
    at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
    at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
    at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
    at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
    The following error is logged in the SSRS logs:
    processing!ReportServer_0-1!12d0!10/31/2013-15:28:48:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Exception of type 'Microsoft.ReportingServices.ReportProcessing.ReportProcessingException' was thrown.;

    I just wanted to share my last upgrade experience with you, in case, someone is running into the same problem:
    I've just upgraded to SCCM 2012 R2 CU4 (from CU3).
    Guess what? It broke the Reporting, error message as above!
    So I've put the computeraccount of my SCCM/SSRS server (SSRS service is running under local system account) into the WAA group, reboot - but it didn't help. Tried also the Pre-Win2000-Compat-group. Didn't help. A colleague was not experiencing the problem.
    Hmmm. So what is different between our accounts?
    The difference found: My account's userPrincipalName was set to the same as the sAMAccountName, but missing a domain. The account was obviously created by a bad script.
    Solution 1: Delete the userPrincipalName attribute, or
    Solution 2: Make the userPrincipalName complete by adding a valid domain, i.e. [email protected]: In the Active Directory Users and Computers mmc, User Properties, Account tab, select a domain for the "User logon name".
    The problem seems to be only for user accounts, that are in a different domain than the SCCM server's account, i.e. server in example.com, user account in sub.example.com. Always multi-domain problems...
    Thorsten Lau - IT-Lösungen http://blog.system-center.de

  • Voice memo missing on iphone 4s after upgrade to ios 7

    voice memo app is missing on my iphone 4s after upgrading to ios 7. any ideas?

    Miracle!!!!!!
    The iOS 7.1 update solved the WIFI issues on my iphone.
    I'll try to upgrade my ipad later on and then
    I think I can sell my hairdryer and my freezer.
    Thanks to the people @ infinite loop ;-)

  • Missing files - corrupt library after upgrade to 11.1.4

    I updated iTunes to 11.1.4, and after launching, it looked like it was updating my library as it's done in the past.  However, this time, after an hour I realized it had not yet completed, and a dialogue box asking about creating an iTunes U playlist was on the screen.  I tried to do so, but it just kept repeating.  So finally I stopped it, and now I have an file marked iTunes library (damaged) and an incomplete library.  I am missing thousands of songs compared to the last .itl I have in Previous iTunes Libraries.
    I thought when iTunes did an upgrade to the library it was supposed to make a backup? If so, and I did the upgrade yesterday, why is the most recent file in Previous iTunes Libraries dated from four months ago?
    How can I repair the damaged .itl file, as the one iTunes is using now as, as I mentioned, missing thousands of songs now.
    Is there any sort of script or utility I can use to figure out exactly which files are missing from the current .itl in my library? 
    Thanks in advance. 

    I thought when iTunes did an upgrade to the library it was supposed to make a backup? If so, and I did the upgrade yesterday, why is the most recent file in Previous iTunes Libraries dated from four months ago?
    No, you need to do the backup as part of regular computer maintenance and before you do any software upgrades.  iTunes moves the old library into the previous library area but perhaps your update failed before it did that.
    How can I repair the damaged .itl file, as the one iTunes is using now as, as I mentioned, missing thousands of songs now.
    https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library after upgrade/crash from previous iTunes library file.
    iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
    Is there any sort of script or utility I can use to figure out exactly which files are missing from the current .itl in my library?
    Yes, there's one on the Dougscripts web site that will crawl through a library.  In yur case it's probably just as easy to drag the whole iTunes media folder to Automatically Add to iTunes.  Anything already in the library it will ignore.  Anything not there it will add.

  • Texts are not showing up after upgrading to version 11

    Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
    Before (version 10.3.183.7...)
    After (version 11.0.1.152...)
    The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
    Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
    You will see the changes with Flash player version 11, and everything working fine with older versions.
    I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

    This is a known issue and we have a fix for this in our next release. Thanks for posting.

  • Issue with row/column text lengths in report painter

    Hi Gurus,
    I have created a report painter report with formatting of the row/column length text as medium, but for one FS item/GL Account the report when executed still picks up only the short text length. I am not sure how this can be resolved.
    Any ideas is appreciated.
    Regards
    Satish

    Applied OSS Note 360096 and it worked. Thanks for all your help.

  • Line Items missing in report painter report..

    Hi guri's,
    Iam uisng customized  P&L report painter report using with library 1VK....in this report some line items are not shwoing..... how to solve it...
    regars
    JK

    After you've create a P&L report using the report painter, you would also have to create line item reports for example 'Receiver- Profit Center Line Items'  and then assign these line items reports under 'Report/Report Interface' in the P&L report.
    How to do this:
    1. After creating the line item report(s),  use transaction code GR52 which is for change report group. Enter the P&L report group and click enter.
    2. Under 'Report/Report Interface', click on 'configure' under assigned report to library.
    3. In the pop-up screen, click on the green plus sign "Insert Row"
    4. Another screen will pop-up. Enter the report group for the line items report and enter.
    5. Save
    6. Regenerate your report group. After regeneration, execute.
    7. Drill-down in the displayed P&L report to the line items.
    Don't hestitate to ask for further clarifications.
    Elias

  • Maximum size to reference text fields in report painter

    I have created a library for report painter but reference text fields were not transfered because of their size exceed 24 character long. is there some SAP procedure to extend this size at the moment we are creating the library?  Thanks in advance for support me.

    Hi Francisco
    Firstable I created a structure evaluation using SAP TC MCS7 and took the own customized table that was set up for SPL porpuses. this table contains several fields including text fields and now we would like to take them for set up several report painter but I noticed that this kind of fields are not available when I created the library using GR21 also when I tried to create the set using GS01 appeared a error "this field is bigger than 24 characters" or something like that.
    SGTXT              Text Field                      50
    ZZBKTXT          Text Head Reference      25
    ZZKIDNO          Payment Reference        30
    Thanks in advance to take time for my research.
    Regards

Maybe you are looking for