GL View Line Items on Form

Hi All,
I have a requirement to print GL View Line items from F.62 instead of Entry Level Line Items...
The Program RFKORD30 with Correspondence SAP09 prints the BSEG Line Items ( Entry Level Line items) but i want the GL View Line Items coming from FAGLFLEXA
Is there any different driver program other than RFKORD30 ...
1)Is it Possible to print out in a form GL View Line Items from f.62 ?
Thanks

Hi Julie,
I'm trying to print out the GL View Line On the Custom Designed SmartForm or Script.
RIght Now we have
Correspondence type SAP09 which is linked to Program RFKORD30 which in inturn linked to SAP Script F140_INT_DOCU_01
When we use F.62 with SAP09 as Correspondence Type --- Its printing the ENtry View Line Items i.e what we see in BSEG Table WITH HEADER INFO FROM bkpf
But what we are looking is to print GL View Line Items coming from FAGLFLEXA (Instead of BSEG)
corresponding to same document number from BKPF
I hope i'm clear ..
Any help is appreciated
Thanks in advance

Similar Messages

Prevent user from view line item details in KSB1 report

Hi,
how to restricting user from view line item details by double-click on it or highlight an item click on Document?
Regards,
Kelvin

Hi,
This issue got resolved.
SAP suggested to execute the program "FAGL_CORR_0001" for company code wise.
In ECC 5.00 from support pack 10 onwards two new fields has been added to table FAGLFLEXA. (earlier we are on support pack 9, recently we applied the latest support pack)
If we can execute the above program FAGL_CORR_0001, the two new fields will filled with relevant data and then we can able to use drill down option.
This is for your information.
Message was edited by:
prasad naga

Missing authorization to view line items

Hello guys,
I am having issues viewing line items for a particular vendor. I have access to the line items of other vendors.
I get this error message when I try to view it. And when I click yes, I can only view the credit entry.
Kindly let me know how to resolve the issue.
Thank you and have a nice day!
MichaelJ

Hi,
Please check whether following parameters exists in User ID
a. FIT_ALV_AR
b. FIT_ALV_AP
c. FIT_ALV_GL
Hope, this solves your issue else revert.
Regards,
Tejas

Need to draw line after the 2nd line item(Smart Forms)

Dear Friends,
I need to draw horizontal line after the 2nd line item and 3rd line item in smart forms.How can i achive this.
Plz help.
Edited by: farook shaik on May 19, 2009 8:19 AM

This is what you need to do:
1> In the tables->details section define two line types LT1 and LT2.
2> Come back to tables section pressing the table painter button.
3> Select a line type for which you want to have an underline(say LT2).
     a] If the anchor cursor does not come click the draw lines and columns button( the pencil icon nutton)
     b] select the line type ( it will become black after selection. Press and hold down ctrl to select
         multiple cells.
     c] after selection click the lower 'frame button' ( which is right at the top of box and shading).
4> Now goto data section where you have given your internal table name and work area.
     a] in the sort criteria put your field POSNR and check the Event on Sort end chk box.
     b] you will see an extra node under the main area of the table.
     c] Create a table line with the line type LT2 in the node.
     d]Also in the Main area add another table line with LT1 as the line type.
5> If POSNR remains unchnged LT1 will be triggered.
6> if Posnr changes then LT2 will be triggered with the underline.
This will suffice your requirement.

Line item only display after run RFSEPA01

Hi expert,
I set up all gl account with line item display but i need to block GL and run program RFSEPA01 so that line item will posted to BSIS table.
Is this need to run every after new posting done in?
As i run for one GL before with RFSEPA01 after new posting to that GL, i not able to view line item in FS10N, therefore i go and run RFSEPA01 again.
Is this everyday i need to run & re-run for all gl? Is there any configure i missing?
Please advice on menu path to configure the link to BSIS table.
Thanks.
regards,
chuan

Dear,
What is your requirement?
Why you are running RFSEPA01 daily when there is option "Open Item managed" ticked in FS00?
Program description: Switch On Line Item Display by Changing Master Record.
TABLES: bsis,
       *bsis,              "#EC NEEDED
        bsas,
       *bsas,             "#EC NEEDED
        bseg,
        bkpf,
        skb1,
       *skb1,
        ska1,
        t001.
RFSEPA01 is used when the GL Account is not there in open item status and need to change that to open item managed.
Check once again

Removing line item dimention from info cube

Hi All Experts,
Early watch report has suggested us to remove line item dimention and high cardinality from some cubes.
bur our cubes are having data , and when I tried to chekc this in our Dev server, Line Item dimention is disabled when it is filled with data.
but when I delete data from Cube, Line item diemention check box gets enabled.
so does it mean that we can not flag or remove line item dimention form cube if contains data,
and in mine case I have to delete all data from cube and then trensport it to PRD after deleting data from Cube and reload after transport.
Am I correct.
Please advice If I am wrong.

Hi,
yes, you are correct. You have to delete the content of the cube before you can change a line item dim. to a 'normal' dimension. As a workaround you might use a copy of the cube, create and/or copy all update rules to the new cube, and create a new update rule from the old to the new cube. Transport everything to prod, then load you new cube from the old cube and do all the other load as before. Move/copy your queries from the old cube to the new cube as well.
regards
Siggi

FM Repost line Item

Hello,
I have a requirement to transfer the posted FM documents between the Fund Centers, Example Reposting CO line items
KB61, Is there is any in FM to Repost the FM line item documents form One FC to other FC.
Please advice.
Regards
BK

Hi,
You should not try with all categories, but only with the relevant one. If it's CO document, then it's 920. Fill the new fund centre in the receiver account assignment, switch off the 'Errors only' flag and see if the work list is created. Ater it's created execute it via FMCT.
If for some reason, you don't succeed with FMCB (though, you should), you can work with FMCG as I mentioned before and then refine the execution to the relevant documents in FMCT.
Regards,
Eli

F8 Pro Forma for free goods - value in F8 line item to equal VPRS cost

Hello,
I would like to configure the following scenario:
FD sales order created with KLN item category
LF delivery created and processed
F2 billing invoice created (no charge)
F8 pro forma invoice created (line item value to equal line item cost)
I have already configured this to work properly for regular sales orders and the values copy from the order as specified in the VTFL copy control settings, but I can't figure out how to get the above situation working. Any help would be greatly appreciated.
Thanks,
Andy

Check OSS Note 33258 - Processing free-of-charge items is of help to your scenario.
Regards,

Comparing and picking the right value form one of the line item in a doc.

Hi Gurus,
I have requirement such that I have to show the tax jurisdiction code of only one item. That is if there are 5 line items with in a document and each one has diffeerent tax jurisdiction code, then we should be showing only one tax jurisdiction code for a document. Line items are not displayed in report. The condition to pick up tax jurisdiction code is the one which has least ending zeros.
Supppose
Doc1          Item          Tax Jurisdiction code
1800000002       1          CNQC00000000000
1800000002       2          CNQC00000000000
1800000002       3          CN0000000000000
1800000002       4          CNQC00000000000
1800000002       5          TXJOHNCLEBUR000
I have to display the value of tax jurisdiction code corresponding to item 5 as its has least zeros in it.
So what I am trying to do is add another custom z object tax jurisdiction code and the value for this is populated using a routine in the update rules, such that comparing all the tax jurisdiction code for all the corresponding items in a document.
Now the question is if I am reading all values of document no. line item and tax jurisdiction code into an internal table form communication structure for a data package. And in the update rule I will be writing a routine comparing the values of tax jurisdiction code from internal table and populating the desired value. Now the big question for me is if there are two line items of a document in one data package and another 3 line items of the corresponding same document in data package 2 then how can we compare the values of Tax jurisdiction code of all the 5 line items of a document.
If this can be achieved using customer exit on the front end let me know and just inputs how the abap code would be or if not do I have to write abap in updates rules. I just want to know how to compare different values of Tax Jurisdiction code and select the one with has least ending zeros. For information the tax jurisdiction code is of type character and length 15.
Any help is really appreciated.
Thanks,
Raj

Yes, it's possible. Just use a regular text item. Create an LOV using the LOV wizard. When you define the query for the LOV's record group, enter a statement that selects from the other database table. Set the return value of the appropriate LOV column to be the text item on the form. Finally, assign the LOV to that text item, so that the LOV pops up when the user presses the LOV key with the cursor in that text item. You can also set the LOV so that it automatically displays when the cursor enters the text item.
Just look up LOV in online help if you need more info.

SAP Note 1486147 - TDS line item details not flowing in Form 16 A Samrtform

1.     Old Form 16 certificate is printed before 01.04.2010 and new certificate after 01.04.2010. (its correct SAP has written code in such a manner Old one is SAP script and new on is Smartform.)
Old FORM 16 A gets Acknowledgement No details correctly.
2.     Acknowledgment No details are not flowing in the NEW Smart Form of Form 16 A.
When I debug the program I can see PARTNER No details are copied in PAN NO field in TABLE : IT_LFA11[]
BUT PARTNER NO details are copied to PARTNERNO field in TABLE IT_LAFA1[].
TDS line item details on Smart Form is printed based on Partner no. here partner no. is blank as IT_LFA11 table is passed to smartform..
Program name : J_1IEWT_CERT
Include name : J_1IEWT_CERT_F01.
Code:
FORM CALL_FORM .
DATA: h_formname TYPE tdsfname,
          h_fmname TYPE rs38l_fnam,
          h_output_info TYPE ssfcrescl,
          h_spoolids TYPE LINE OF ssfcrescl-spoolids,
          h_output_options TYPE ssfcompop,
           spoolno(10) TYPE c.
DATA : it_lfa11 TYPE STANDARD TABLE OF J_1I_LFA1 INITIAL SIZE 0,
         it_printtab TYPE STANDARD TABLE OF J_1I_PRINTTAB INITIAL SIZE 0,
         it_deduc TYPE STANDARD TABLE OF J_1I_DEDUCTEE INITIAL SIZE 0,
         it_qrtrtab TYPE STANDARD TABLE OF J_1I_QRTRTAB INITIAL SIZE 0,
         it_challan TYPE STANDARD TABLE OF J_1I_CHALLANDETAB INITIAL SIZE 0.
SORT challandetab BY j_1iextchdt DESCENDING.
it_lfa11[] = it_lfa1[].
it_printtab[] = printtab[].
it_deduc[] = it_deductor[].
it_qrtrtab[] = qrtrtab[].
it_challan[] = challandetab[].
h_output_options-tdnewid    = 'X'.
h_formname = layout.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname                 = h_formname
*   VARIANT                  = ' '
*   DIRECT_CALL              = ' '
   IMPORTING
     fm_name                  = h_fmname
* EXCEPTIONS
*   NO_FORM                  = 1
*   NO_FUNCTION_MODULE       = 2
*   OTHERS                   = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION h_fmname
EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
   OUTPUT_OPTIONS             = h_output_options
*   USER_SETTINGS              = 'X'
IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
   job_output_info            = h_output_info
*   JOB_OUTPUT_OPTIONS         =
    TABLES
      it_lfa1                    =   it_lfa11
      it_printtab                = it_printtab
      it_deductee                = it_deduc
      it_qrtrtab                 = it_qrtrtab
      it_challandetab            = it_challan
* EXCEPTIONS
*   FORMATTING_ERROR           = 1
*   INTERNAL_ERROR             = 2
*   SEND_ERROR                 = 3
*   USER_CANCELED              = 4
*   OTHERS                     = 5
IF sy-subrc = 0.                                          "1375614
    CLEAR :spoolno,h_spoolids.
    READ TABLE h_output_info-spoolids INTO h_spoolids INDEX 1.
    IF h_spoolids IS NOT INITIAL.
      spoolno = h_spoolids.
      CONDENSE :spoolno.
      MESSAGE i155(id_wt) WITH spoolno.
      PERFORM update_cert_tables.
    ENDIF.
ENDIF.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Can anyone Please help me to get TDS details on the Smartform.
Regards,
DivyaLalwani.
Edited by: kishan P on Feb 23, 2011 1:28 PM

Hi,
Achnowledgement details comes in table it_qrtrtab at run time in the smartform, you can dibug the program j_1iewt_cert and smartforms J_1iewt_cert where at run time you will able to see data avaialability, If values are not available in this internal table then check related notes given by SAP, I have already implemented this note and also faced same issue but my FI consultant has given me the related note and my issue was resolved.
Please checkout related notes and data population in the dibugger.
Regards,
Umang Mehta

How to display line items corresponding to Header adobe form

Hi ,
As I am new to Adobe Form, So struggling with below problem related with Adobe Form.
For example, I have data in an internal table :
Stage      item
100         A
100         B
100         C
200         D
200         E
Here you have for field 'Stage' value '100' , I have 3 line items, for value '200' , it is 2 line items and so on.
My requirement is , I have to show Stage field at top and corresponding line items should be displayed in table.
Stage: 100
item
A
B
C
Stage: 200
D
E
I have used Nested table concept to achieve it but didn't get expected output.
Please help me out.

Hi,
     If all of your line items are getting displayed in different pages, to my knowledge, there may be two possibilities.
1) May be the size of the main window can accomodate only one line item. If one item data fills up the window, then there wont' be any space for the next line item data to be accomodated in the same window in the same page, so, the system triggers the next page. Like-wise for each item data. If this is the case, increase the height of the main window to display items in same page.
2) Check the driver program. Find the Write_form block, which is written inside an item loop. May be there is a Form-control Function module( Control_form with parameter 'NEW-PAGE' ) being called after the write_fom block, within the loop. If this is the case, remove the control_form FM section to make the data display in same page.
Best Regards,
Kumaar.S

How to Update multiple line Items in Sales order Interactive form

Hi,
I have created one online interactive form for sales order. In that I incorporated dynamic table logic .i.e. we can add row and delete row using buttons. Interactive form is working fine with one line item. But if I give multiple lines in table (line item) its creating sales order with single line item. So please help me how to pass multiple lines.
Thanks & Regards,
Krishna.

Hi,
Check out this link, this deals with the problem you are facing.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/802f0ed1-a17a-2c10-7db4-d515a5b047ed
Regards,
Runal

Changing the default view for Line Items in an Auction.

Hello All,
We have a version 5 client who is asking for us to change the default view for line items in an auction.
Currently, if you have an auction setup, and you go to the Line Items tab, the default view is the "Basic View". The client would like to change the Default from "basic view" to "price view".
Is there a way to change this default in the system? Can this be configured using query groups? Any information would be helpful.

Hi wood cloud,
This is not possible, bcz there is no VLV for that drop down and we cant set it to the price view.
Thanks,
Ankur Goyal

How many items can be displayed on the same line in APEX form?

Hello,
I have 5 items that I want to display on the same line in a form, but the fifth item is displaying on the next line eventhough I defined it as "no" in Begin On New Line and "no" in ...Field. Is there a limmitted number of items that can be display on the same line? Any help is greatly appreciated, thanks so much in advance.
I want the 5 items to be display like this,
Appendix1 _____ 2 _____ 3 _____ 4 _____ 5 _____
But it is displaying,
Appendix1 _____ 2 _____ 3 _____ 4_____ 5
Thank you,
MT

If you define the 'Begin On New Line' property to 'No', it should work. I just tested it. Do you absolutely need to set the 'Begin On New Field' property to 'No'? That might change the facts.
Best regards,
Mathieu

Line item data does not appear on all master pages - Adobe forms

Hi Guys,
I have a problem in Adobe forms as explained below-
I have a page in the form which has, you can say, a 2 windows or subforms ( Information window/subfirm on top right corner, main on middle of the page ). The data of the main subform is a line item data of delivery. Some parts of the same data need to be printed on the Information subform also. The main subform can overflow to next pages but the information window will have only very limited data to be printed on one page itself, meaning it does not overflow.
Now the requirement is that each line item should be printed on a new page. For example if there are 2 lines items then first line item should be printed on first page. Then there will be a conditional page break and the next line item will be printed on the next page ( I have achieved this using condition page break). The information window will contain information related to corresponding line items. If the first line item data overflows in main then information window of first line item should be printed on first and 2nd page. The second line item should start printing on 3rd page and information window of 3rd page will contain data of 2nd line item.
I created 1 body page and 1 master page. I created one internal table with data of main window and information window. I put the information window on master page to make it appear on all the pages.
This solution unfortunately does not work. The issue is that in case of overflow, 1st page information window shows first line item. 2nd pages shows 2nd line item and 3rd page is blank whereas ideally 1st and 2nd page information window should show first line item and 3rd page should show 2nd line item. This means that master page and body page are not getting linked. If I create the information window on body page itself, it does not repeat on all the pages. Please provide some inputs to resolve the issue.
Thanks
Abhi

Hi Abhinav,
I am also trying to solve the similar issue. Need to print the internal table data in the Master page.
Have you resolved this issue. Can you Please share your solution .
Thanks
Swarna.

GL View Line Items on Form

Similar Messages

Maybe you are looking for