GL Wand conflict with the Smart View add-in

Hello,
Has anyone else come across a conflict with Smart View and a tool called GL Wand?
When our users run the two Excel add-ins at the same time, on exiting Excel they get a prompt for a login to GL Wand several times. The user will then have to press the Esc key several times (or hold it down for a few seconds) to get rid of the prompt. Bot Oracle Support and Excel4Apps have come back with a suggestion to disable the other add-in, which would make for tricky navigating of the month-end reporting process.
Would one of you gurus have a better suggestion for a workaround please?
thanks
Riikka

Yes. Take a look at the link here: http://download.oracle.com/docs/cd/E12825_01/epm.111/sv_user_help/ch08s05s04.html
Cheers,
Mehmet

Similar Messages

Smart View add in 11.1.1.3 Compatibility with Microsoft Office 365

Our organization is looking to move to Microsoft Office 365. Is there any compatibility issues with the Smart View add in version 11.1.1.3? I checked the certification documents, but they do not mention anything about Office 365.

Office 365 Web Apps are not supported and cannot be supported as there is no platform for add-in's in that environment. http://www.microsoft.com/en-us/download/details.aspx?id=13602
Most Office 365 uses cases and users end up with Office installed on the desktop and at that point we are talking about normal Office Support. Right now it is up to the Office 365 administrator to determine the version of Office to be used by their 365 users. http://onlinehelp.microsoft.com/en-us/office365-enterprises/ff637585.aspx
Short answer is that Smart View does not support Office 365 Web Apps and there are no plans to support the Web Apps.

Unusual behavior of View selector with the report level 'Add to Briefing Bo

Hi All,
With the report level ‘Add to Briefing Book’ link, we came across an unusual behavior of View selector in a report.
The Briefing Book saves only the default view from View selector in an Updatable Content type, however it behaves perfectly fine when a Snapshot type is selected for saving in Briefing book.
Has anyone faced similar behaviour, is there any fix?
Regards,
Priti

A case needs to opened via support

After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading.

After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading. I have no special software like numbers or anything else installed on either device. Just using the default viewer provided by apple for viewing email.

The attachment is an .xls excel 97-2003 spreadsheet. I viewed the file in the email and did not edit it with any software. I can forward the file to anyone that is may want to check it out to see if they can help me. I was wondering if there was some way of forcing another ios6 install on my phone and maybe that would solve it.
Is there anyone out there that is viewing .xls files in email using ios6 w/o any other software installed like numbers or any other add ons? I am not upgrading my ipad from ios5 to ios6 so I can still continue to view the emails on my ipad. Is there an email viewer .xls plug-in that will be availablle in the next ios6 update?

How can I combine advanced actions with the branching view?

I am creating a branching scenario in Captivate 7. It's fairly involved and I'd like to keep track of it with the branching view. But, I understand that if I use an Advanced Action, it won't show up in the view. My slides track a conversation that goes down different routes based on the selected answers. I give the user 3 smart shapes that I'm using as a button. When they press the button, I want to change two variables and then jump to another slide. If I put this all into one advanced action, I have to write an advanced action for each button and it won't show the branches.
Is there a way to execute an action that will change my variables. Then, have it jump to a slide. I've been trying to give the user 1 attempt, execute my advanced action that will change the variables, and then have the Last Attempt jump to a slide, but that doesn't seem to work.
Any other ideas?

I just upgraded to version 8, hoping for a solution.
I know that I can write an Advanced Action for every slide like this:
It changes my variables and then advances to the right slide. But, I'll have 100+ slides when I'm done and I was hoping that could make this a little easier. AND, I can't track it on the branching view.
I was hoping that I could make this work:
I could use an Advanced Action to change my variables (I would only need a few) and then have it jump to a slide. This would show up in the Branching view. But, I can't get that work.
Are there any other options?

The DELETE statement conflicted with the REFERENCE constraint "FK_Equipment_Assets". The conflict occurred in database "WorkOrderSystem", table "dbo.Equipment", column 'AssetCode'........can someone give me a solution for this Error.

The DELETE statement conflicted with the REFERENCE constraint "FK_Equipment_Assets". The conflict occurred in database "WorkOrderSystem", table "dbo.Equipment", column 'AssetCode'

ya that's true row is referenced by another table.....but i want the row to referred by another table ,I don't know how to fix it
Actually this is not a C# issue. It is a T-SQl issue.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=transactsql
The above link should be posted.
Per my understanding, first you should
delete the record from the Foreign Table and then after you have to delete the record from the Primary Key table
Hope it helps you.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I would like to disable the smart bookmarks add on. How do I do that?

I downloaded the smart bookmarks add on but I would like to disable the add on and go back to the default bookmark view. How do I do that?

See http://kb.mozillazine.org/Uninstalling_add-ons

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

So I have an iPad with the smart cover, and it's usually supposed to turn on the iPad when u open it, but it's no doing that for me. Nor is it turning off without pressing the button. What is the meaning of this?

So I have an iPad with the smart cover, and it's usually supposed to turn on and off the iPad when u open it and close it, but it's not turning on for me. Nor is it turning off without pressing the button. What is the meaning of this?what caused it to be this way? Is there someway that I could fix it?

Wait a sec did this just start?
You set up the smart cover function in settings (you did that, right?) so, if you did that and it's failed you make an appointment at your nearest Genius Bar now.

Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

I love the Smart Cover. It fits the way I work and I love the instant on/off and the always available screen protection. I wouldn't use my iPad without it.
I got a Cover Buddy for the back, because I wanted the back to be less slippery when I'm using the iPad in the classroom, teaching. I picked this back cover because it's VERY lightweight, easy to get on or off and, protects the corners, has accurate cutouts for the ports, and (in the colors) has a rubberized surface:
http://www.switcheasy.com/products/CoverBuddy/
I have a Built NY "hoody" slip on case with a hard internal shell that I use when I'm in the field and I can put the iPad with the Smart Cover and the Cover Buddy inside this . But for everyday use, the Smart Cover with the Cover Buddy is a terrific combination.

TS1297 My numbers / symbols 1-9 / !-( do not work on my wireless key pad. I have tried the resolution information but, still no response with those keys only. I can only type these keys with the keyboard viewer. Any suggestions?

My numbers & symbols 1-9 / !-( do not work on my wireless key pad. I have tried the resolution information but, still no response with those keys only. I can type these keys with the keyboard viewer, thankfully. Any suggestions?

Unable to type while Mouse Keys is enabled in OS X

"conflicts with the WAN IP address"

I just picked up a used AirPort Extreme N (Gigabit Ethernet) to replace my current non-Apple router, which has worked satisfactorily but lacks the ability to share disks--something I need. Using my G5 running 10.4.11, I downloaded AirPort Utility 5.4.2 to set up the new (to me) device, and did a factory reset just to clear everything out. I placed the AirPort in the network exactly where the old one had been--with its WAN port connected to the line supplied by my ISP (see below) and its three other ethernet ports connected to various clients. Then I ran into a problem:
Under the "Internet" icon of Airport Utility, I set it to Connect Using Ethernet, and Configure IPv4 using DHCP (My current router uses DHCP to provide IP addresss to both the wired and wireless devices on my network). The numbers below that are: IP address 192.168.1.12, subnet mask 255.255.255.0, and router address 192.168.1.1.
The first field of the line labeled "DNS Server(s)" defaults to 192.168.1.1, while the second field is empty, as are the fields Domain Name and DHCP Client ID. I left Ethernet WAN port on "Automatic" and put "Connection Sharing" on "Share a Public IP address," since I believe its combination of DHCP and NAT offer the best security.
The problem: When I click the "Update" button to confirm my settings, I get this message: "The DHCP range you have entered conflicts with the WAN IP address of your Apple wireless device."
Although I am unclear as to why the Internet Connection pane of the AirPort Utility lists "IP address" and "Router address" as two separate numbers (aren't they referring to the same device, the AirPort itself? How can it have two IP addresses?), I figured that I could play it safe and change the starting number to 192.168.1.13 to avoid the conflicts with 192.168.1.12.
But I still get the same error message when pressing "update." I tried changing the range to 192.168.1.50 - 192.168.1.60, and I still get the same error message. There seems to be no range that the utility will accept as non-conflicting with the "WAN IP address" of the Airport.
My ISP did not provide a visible modem as others in the past have done. The internet connection they left me simply comes out of a box on the back of the house that is connected by fiber optics to (presumably) a fiber optic line out in the street. However, this "supply line" has always worked fine with my non-Apple router and--after disconnecting the AirPort that had temporarily taken its place--is working right now as I throw this question to the forum.
Additional notes:
* Under the NAT tab, the box "Enable NAT Port Mapping Protocol" is checked, as it was by default) while "Enable default host at" is unchecked and blank.
* While I currently have wireless turned on in the AirPort, I haven't even tried wireless connectivity yet and want to make sure my wired connectivity is working first.
Thanks for any assistance.

The problem: When I click the "Update" button to confirm my settings, I get this message: "The DHCP range you have entered conflicts with the WAN IP address of your Apple wireless device."
This error message typically indicates that your 802.11n AirPort Extreme Base Station (AEBSn) is receiving a Private (as opposed to a Public IP address) on its WAN port. That could be because your ISP does not provide any device (computer or router), that is directly connected to their "box," with a Public IP address.
Your AEBSn is both a DHCP client (on the WAN-side) and a DHCP server (on the LAN-side). The Configure IPv4 is basically the on/off switch for the AEBSn's DHCP client. It's other option, PPPoE, would only be used if your ISP requires it.
One option would be to reconfigure the AEBSn as a bridge. This would disable both the AEBSn's NAT & DHCP services.
Although I am unclear as to why the Internet Connection pane of the AirPort Utility lists "IP address" and "Router address" as two separate numbers (aren't they referring to the same device, the AirPort itself? How can it have two IP addresses?
The IP address information on (actually the TCP/IP pane) is showing you the AEBSn's WAN port settings. Settings that with Configure IPv4 set to Using DHCP would come from the DHCP server upstream of it. If this server was providing Public IP addresses then the values in both the IP Address & Router Address fields would not be in any of the three valid Private IP Address ranges (10.x, 172.x, or 192.x)
Under the NAT tab, the box "Enable NAT Port Mapping Protocol" is checked, as it was by default) while "Enable default host at" is unchecked and blank.
This setting would not have anything to do with the error message that you are getting. Instead, this option is used as an on/off switch for the NAT-PMP protocol. This protocol is similar to non-AirPorts' UPnP protocol.
While I currently have wireless turned on in the AirPort, I haven't even tried wireless connectivity yet and want to make sure my wired connectivity is working first.
Both wired and wireless clients will be impacted by this until resolved. I again, suggest that you try reconfiguring the AEBSn as a bridge. (ref: AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode))

My time capsule will allow only one machine to connect to the internet at a time. Connection sharing is "off" on the Airport Utility. When I try to share an IP address I get the message that "DHCP range that I entered conflicts with the WAN IP address" I

Suddenly, my time capsule will not allow more than one computer to connect to the internet at a time. On the Airport Utility on the internet tab, Connection Sharing is "Off (Bridge Mode)" When I try to change it to sharing an IP address, I get two messages that the beginning and ending DHCP addresses that the DHCP addresses I've entered conflict with the WAN address of my Apple wireless device."
Any ideas?
Thanks

I use a DSL to connect to the internet. The modem is a Westell C90-810030-06. Two things happened in connection with the fail. I upgraded the firmware in both my Time Capsule (connected to the DSL) and the Airport Extreme (connected to my printer--used to extend the network). I also upgraded my Colof Nook to the Android Faux Tablet version. I can't imagine that that is creating some sort of mismatch.
I have now downgraded the firmware on the Time Capsule to 7.4.1 which is what I had before. Fortunately, I found the trick to downloading the older airport utility to find the older firmware. All the older versions disappeared from my computers.
I still have the same problem. Wifi works fine. If a second device connects to the wifi, then it works fine, but the first no longer has a connection.
And my Airport Extreme is not working at all. It cannot be seen by the computer. I tried resetting it. I'm going to connect it by ethernet and downgrade the firmware on it.
I appreciate any help. This is so frustrating.

For some reason when I shut down my computer then turn it back on, it comes back directly into my account, bypassing having to enter a password to get into my account. This works in direct conflict with the parental controls I've got set up. Any ideas?

For some reason when I shut down my computer then turn it back on, it comes back directly into my account, bypassing having to enter a password to get into my account. This works in direct conflict with the parental controls I've got set up. Any ideas?

Thank you so much for the quick response to my question. I tested your directions and it works!! Thank you. I would never have figured that out. I knew I had to go into System Preferences but would not have guessed that I needed to have Automatic Login set to off.

The colour swatch 'black' has a conflict with the current document?

I have created some graphic styles and saved them as the manual explains.
When using them in a new document I keep getting the conflict window asking if I wish to merge swatches.
What have I done to keep getting this unwanted conflict message?

Yeah, *real* annoying. This is something new. It didn't happen before in CS5, at least not to me and I always work with global colors.
Example:
No matter what object, no matter what color (even without any color!), upon paste I get the merge dialog: The color swatch "K=30" has a conflict with the current document.
When I delete the swatch and then cut something (not having that color) I get: The color swatch "Deleted Global Color" has a conflict with the current document.
Does anyone have a solution to this problem?
This is driving me nuts.

GL Wand conflict with the Smart View add-in

Similar Messages

Maybe you are looking for