GL2 Capture Using a mini USB2?

I have a Canon GL2 and badly need to capture some miniDV on to my computer. Without going into the long story, (http://discussions.apple.com/thread.jspa?threadID=963099&tstart=0), my firewire ports on my iMac G5 (iSight) are not working. Now I'm faced with the crisis of finishing a good sized project by next weekend, but I'm not even able to capture. Will FCP5 allow me to capture if I am using a mini USB2 cable? I'm just trying to think of any way besides firewire that I can drop this video...

USB is not recommended for use with capturing video. Short answer is that it sends info in packets rather than a continuous stream thus causing potential for dropped frames. That being said, some people have reported using it successfully. In the end, can't hurt to try.
rh

Similar Messages

Mac Pro using Mac Mini as Print Server

Hi all,
Mac Pro is wired to my network, Mac Mini is Airport connected.
I'd like to use Mac Mini as a Print Server without keyboard and mouse. I've installed OSXvnc-server on Mac Mini and Chicken of the VNC (CVNC) Client on Mac Pro.
Mac Pro's keyboard is azerty as was Mac Mini, it's impossible to loggin with Chicken of the VNC, password is not accepted, I connect an azerty keyboard to Mac Mini and I can loggin.
Typing on Mac Pro in Mac Mini TextEdit through CVNC give weird keyboard layout, not only azerty qwerty different layout.
In between my two Mac Mini there wasn't any problem using CVNC and the same server but Azerty Qwerty layout.
Is there any other solution to use Mac Mini as a print server ? What about using Desktop remote connection ?
Thanks,
Peloche,
MacPro 2.66, 6GB, 1TB; Mini G4, 1.45, 1GB; iPod 60 GB; 30" & 20" ACD; Apple IIC Mac OS X (10.4.7)

Ah… right! That explains it.
So what model printers are they?
Ned,
Printers are HP Color LaserJet 2550L, HP Photosmart 8250 and Epson EPL-5900L.
I've changed the VNC Client from "Chicken of the VNC" to "VNCThing".
Now I can log in from Mac Pro using its Azerty Keyboard as Qwerty Keyboard.
Once logged in I've set Mac Mini Keyboard to "Extended (or Expanded ?) American" keyboard within System Preferences, with this option Mac Mini see the Mac Pro Keyboard as an Azerty layout...
I've connected two printers through USB2 Hub connected to Mac Mini and the third one direct onto Mac Mini USB port.
Back to Mac Pro "System Preferences Fax & Printers", "+", immediatly the 3 printers have been proposed, I've selected them and tested all: it works perfectly.
Mac Mini is set to "restart after power cut" and is connected for power onto a remoted control power distribution sockets, that means Mac Mini is starting and stopped when printers are powered on and off.
The sole small issue is that I can't find how to display Mac Mini GUI on Mac Pro at a better resolution than 1024 x 768.
Thanks for your time,
Peloche,
MacPro 2.66, 6GB, 1TB; Mini G4, 1.45, 1GB; iPod 60 GB; 30" & 20" ACD; Apple IIC Mac OS X (10.4.7)

Recording Cable TV Shows using Mac Mini

Hi:
does anyone know how to record cable tv shows using Mac Mini?
please discuss the hardware and software issues.
Munir

munirul wrote:
Hi:
does anyone know how to record cable tv shows using Mac Mini?
please discuss the hardware and software issues.
Munir
There are several possible ways, some depend on the type of Cable TV system you have. First I am going to assume you are an American. While Cable TV is available in other countries, for example here in the UK, it ***** so bad in the UK that you are unlikely to be using it here.
Now, with American Cable the first possible method has already been mentioned by others which is to use an analogue connection from your cable box to an Elgato EyeTV 250 (possibly discontinued). This is an analogue tuner for a Mac and will let your Mac record the signal. There is also the more expensive EyeTV 250Plus which includes a chip to do the conversion to MPEG2 and take the load off your Mac. This method will work whether your Cable box is analogue or digital.
If your Cable box uses "Clear QAM" then you could get the HDHomeRun box from Elgato. This not only will provide a direct digital signal with no loss of quality, but will also provide two tuners, and can be shared across your home network. There is also the EyeTV 500 see http://www.elgato.com/index.php?file=products_eyetv500 but this also may have been discontinued.
Finally, if your Cable box has a FireWire connection (and by law they have to give you the option of this) then you can connect the box via FireWire to your Mac and run software on your Mac. Again this will be a direct digital capture with no loss of quality. See the following two pages for information on how to do this.
http://www.ammesset.com/irecord/
http://project-tigershark.com/people/rob/blog/2007/01/14/cable-tv-mac-firewire-h d-pvr/
Note: I am in the UK and have no direct experience of any of the above, and can only gnash my teeth in frustration at how spoilt for choice US TV/Mac users are compared to the pathetic massively DRMed situation here in the UK.

Cannot capture using log & transfer because warning message

Hi,
I recently switched cameras - from using a Canon Mini DV ZR 900 to a Panasonic SDR-H85. Of course when I plug in the new camera to the computer via USB, FCE4 doesn't recognize it because it's AVCHD. The media (video clips & stills) is transferred anyway via Adobe Bridge and stored in a designated folder on my hard drive. I then converted the video clips from .MOD to .MOV with MPEG Streamclip. The converted clips are saved in a different folder. I also did the easy set up changing the format to Apple Intermediate Codec and use to AVCHD 1440X1080i60. So then I start a new project and try to do log and transfer but when I try to add the folder containing the converted clips, I get a warning window that says that the folder contains unsupported media or has an invalid directory structure and to please choose a folder whose directory structure matches supported media. Can someone please tell me what is wrong or what I'm missing? I need to have a way to identify and organize these clips. Thanks!

Okay, as soon as I get my next check. Judging by your response and what I read on the Apple site, that will solve my problem? I sure hope so. One of the reasons I switched from recording to tape to hard drive is because an Apple Store techie assured me it would be much easier capturing using log and transfer rather than the long drawn out process I was using with tape (making subclips, etc.). So I was pretty upset to encounter this obstacle. I wasn't warned about the perils of AVCHD, and reading the process in your book it didn't seem like it should have been a problem anyway. So I'm still quite confused. But that's okay. I'll be happy enough just to have something working finally! Thanks

Capture Using USB Camera

I have a client's Canon DC 10 Mini DVD camcorder and the disc won't finalize, so we need to load it into FCP directly. On my 1st try, FCP doesn't recognize the device, but the Mac Pro sees it as an Untitled CD. Any suggestions? Thanks.

you can't capture using USB, you'll need a firewire connection in order to do that. If the cam doesn't have a connection, I'd get a hold of a mini dv camera or anything else really that has a firewire connection and do a dub from your DC 10 to the mini dv camera. then you'll have a straight dub of your footage on tape with a firewire port. there you'll be able to do a proper capture onto your computer HDD.

HT201177 How to connect my MBP 13" (Mid-2012) to a projector/LED TV using a mini-display port VGA adapter (CAPDASE)

Hello Sirs, I'm having a hard time connecting my MBP 13" (mid-2012) to my projector using my mini-display-VGA out adapter. But when I switch to Windows 7 (via bootcamp), it can easily be connected... Please help me with this problem. Thanks

Try connecting the Minidvi to the VGA and connect it all together, first try turning ing on the MBP, then connecting dvi to the the projector. Make sure your projector input is set for VGA. If noo joy invert the affored mentioned proceedure. You should see your image if not, try going to system preferences>displays, click display. Try readjusting the resolutions in display. reboot monitor.

Does the mini DVI port cary audio if using a Mini-DVI to HDMI Adapter?

Hello everyone,
I've heard it is possible for a DVI port to transmit audio data to a HDMI connection if a DVI to HDMI cable is used, which will allow the sending of both audio and video to your TV. see: http://en.wikipedia.org/wiki/DigitalVisualInterface
I'm assuming this is not possible using apples mini DVI port, but just wanted to check to make sure. My main goal is to get surround sound out of my powerbook. To do this by simply adding a Mini-DVI to HDMI Adapter would be GREAT!

Hi Jonathan,
I'm assuming this is not possible using apples mini DVI port
Yup, no audio, unfortunately. The audio will have to transmitted separately via the analog audio output.
Yang

I am attempting to plug my mac into my tv. I am using the mini dvi to s video adapter. When I plug it in, the display goes all wonky and becomes stretched and enlarged.

When I attempt to connect my mac to the monitor using a mini dvi to s video adapter the display becomes enlarged and stretched. I cannot seem to fix this using the system preferences or the quick keys that allow you to zoom in on the display. Any suggestions?

I am using MAC OSx 10.5.8 (9L31a) as my operation system. The TV says "No signal. Check connected device's power, cable connection and source selection." Seems to me that that goes in hand with what the Samsung tech said about the Mac needing to be forces to use the external display. But how do I do that?

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

Hall Palm Desert,
if your Mac monitor has Thunderbolt ports, and the PC monitor is on the end of the daisy chain, then you might be able to do it by connecting your PC monitor’s VGA cable to a Mini DisplayPort-to-VGA adapter (e.g. Apple, NewerTech), connecting that cable’s Mini DisplayPort end to one of the Mac monitor’s Thunderbolt ports, and then connecting a Thunderbolt cable between the other port on the Mac monitor and your MacBook Pro.

I am unable to capture using Matrox MXO2 LE with Preimere Pro CS6 and Windows 8

I have a Matrox MXO2 LE and trying to capture with Preimere Pro CS6. My OS is Windows 8 and it sees my Matrox Device via my device managers. No option comes up in CS6 to allow me to actually capture. I am a new beginner with both Matorx and Preimere so learning on the way.
Background Information:
I have a Datavideo SE 600 Switcher (SD) and it is connected to the Matrox. I am trying to capture into Preimere Pro so that we can make DVDs instanly after service, we are a church. I am able to capture using Adobe Live Media Encoder for Live streaming but not Preimere Pro CS6.

Check with Matrox... ask 2 things
1-do you have a device driver that is "certified" for PProCS6?
2-do you have a device driver that is "certified" for Windows 8?
The only NATIVE support in Premiere (any version) is Firewire

HT4241 How do I use the mini deplayport to hdmi

How do I use the mini displayport to hdmi on my tv?

You use something like this:
http://www.amazon.com/Mini-DisplayPort-HDMI-Adapter-Cable/dp/B003OC6LWM/ref=sr_1 _1?ie=UTF8&qid=1365115124&sr=8-1&keywords=minidisplay+port+hdmi
Ciao.

First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

Restore iPad to Factory Default; do not restore from backup. It may be the cause of the problem.
Settings>General>Reset>Erase all content and settings

I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/

I have a Macbook Pro 13.3 i5 w/ no hdmi port. How can I connect my Mac to TV to watch video, photo ? Is the Thunderbolt port a mini display port where I can use a mini display port to HDMI cable? If not, what are my options??

I have a Macbook pro 13.3 w/ i5 that has no hdmi port. I want to be able to connect the Mac to my TV set to watch Video, Photos and files from Mac to TV.
Is the Thunderbolt port similar to a display port or mini display port? Can I use thunderbolt port to connect thru a mini displayport to HDMI cable or converter?
Been trying to locate a USB to HDMI cable or converter (at a reasonable price) but all I found is a displayport or mini displayport to HDMI cable/converter.
What other options are available ?
Thanks a lot for your assistance.

Thunderbolt uses a Mini DisplayPort adapter to send video and audio to HDMI. Here's some on Amazon http://www.amazon.com/s/ref=nb_sb_ss_c_2_8?url=search-alias%3Dcomputers&field-ke ywords=mini+displayport+to+hdmi&sprefix=mini+dis%2Caps%2C249#/ref=nb_sb_noss?ur l =search-alias%3Dcomputers&field-keywords=mini+displayport+to+hdmi+with+audio&rh = n%3A172282%2Cn%3A!493964%2Cn%3A541966%2Ck%3Amini+displayport+to+hdmi+with+audio

Help using a mini display port to HDMI cable with MacBook Air and TV

Hi, Apple gurus. I need help setting up my MacBook Air to my Vizio TV using a mini display port to HDMI cable that I just purchased on Amazon.
And here's info about my MacBook Air:
In the Amazon reviews, someone posted the following how-tos, which aren't working for me:
1. Plug in both ends, mini display port on your macbook and the HDMI on any available port on your LCD.
2. Go to upper left Apple menu and scroll down to system preference. Or use your FINDER from the dock, go to applications, then system preference.
3. Click on Displays
4. Click on DETECT DISPLAY
5. A similar screen pops up with name of your LCD, mine says SONY LCD, click on ARRANGEMENT
6. Click the box that says MIRROR DISPLAYS.
7. Go back into system preferences and go to SOUNDS which is located under HARDWARE.
8. Click on OUTPUT, then select HDMI, which should be listed next to your LCD name.
I ran into trouble at step #4. My MacBook Air doesn't list the option of "detecting display." I do, however, have the box mentioned in step #6, "Show mirroring options in the menu bar when available."
Regarding step #8, HDMI didn't appear in the list — I only see "internal speakers."
So, what am I doing wrong? Or, did I buy the wrong cable?
Thanks in advance for your help!

Or you need to get an appropriate adaptor. The Griffin adaptor sold on Apple's Online Store will work with a standard HDMI cable.

GL2 Capture Using a mini USB2?

Similar Messages

Maybe you are looking for