Glance 2.0 IN WP8.1 Developer Preview

Recently I had to RESET my phone. Glance 2.0, introduced with Lumia Black, although updated via store, still is not showing notification and custom text. It is still working like older version. Kindly help.
Also, phone is working slow and also sometimes restarts automatically. Apps like Temple Run 2, Messenger, is slow. Keyboard at times lags.
Device: Lumia 620
P.S. When upgraded from GDR3, Glance works well, but when after RESET its not working well.

93tid wrote:
VARUNGUPTA wrote:
garym11 wrote:
You need to update glance and extras+info after the reset.
http://www.wpcentral.com/nokia-glance-screen-personalised-notes
Both apps are up to date, yet not supporting all features.
That's simply not possible.
It is a problem for all Developer Prevoew users... have seen same in comments too, there complaints......

Similar Messages

WP8.1 Upgrade Successful for Developer Preview Phones?

Hey,all.
For you folks who installed WP8.1 early via the developer preview program with their Lumia 822 and Lumia 928 phones, did the WP8.1/Denim upgrade perform successfully without any hiccups?
Just curious.
Thanks in advance!

Since the Windows Phone calendar shortcomings is one of my favourite rants, and since I know that developers hate users, especially when they are right - can someone please forward the link below to the Windows Phone developers, so they know what I expect from a smartphone calendar regarding historical range and the amount of data?
http://support.apple.com/kb/HT4489
Also, from plowing through their forums:
* Future events are always synchronised between the phone and the cloud.
* Past events are user selectable synchronised for weeks, months or anytime on the phone.
TIA
EDIT:
After digging around during some rainy days, it turns out the Windows Phone calendar automatically purging past and future events is a deliberate decision, older than my Nokia N8 phone:
http://answers.microsoft.com/en-us/winphone/forum/wp7-wppeople/calendar-entry-limitations/52b6b187-f...
Votes and comments can also be added at
http://windowsphone.uservoice.com/forums/101801-feature-suggestions/suggestions/2281174-allow-calend...
I have put it into the same category as my quest against Microsoft using Sv: in Danish email replies instead of Re: ...
Hans

Windows 8.1 developer preview update error: 80188308

I tried to download the newest update for developers but cannot complete the update during,installation. I kept on receiving the same message : Update couldn't be completed.80188308. It suggests that its a temporary problem and directs me to download the
update again. I've done this for about 6 times and its still not working. I've also tried restarts.and soft resets. Thanks in advance! I have a nokia lumia 920 running on Lumia black with 24 GB of free space

hello:
I come from china.
my phone is lumia 820.I have this error too and I try update more times ...but not usefull.
then I found a solution and now update success.
1 Donload "Nokia Software Recovery Tool "use it back to windows phone 8.(Back to WP8.0)
(you shoule make backup.and it will take a very long time,please waite)
2 install "For the developer Preview"to my phone
3 update phone steps to steps
and you will susscess!
sorry for my English poor.
but I think you understand.
Nokia Software Recovery Tool not save your data.pless make backup
I think this error is not current update pakeg,It may you update to wp8.1 long time befor.
maybe MS can not find witch times
大家好：
我的手机是lumia 820.升级推送的预览版的也是出现错误代码“80188308”。尝试了很多次，都是失败了
我曾经在“关于”--->"重置"。。。还原过去，但是发现还是不行，后来才发现是还原到了wp8.1.这个是之前升级后的，所以是没有办法回到wp8.0
1 昨天晚上下载了Nokia Software Recovery Tool ,然后安装在计算机上，之后连接手机，识别后，开始下载安装文件
差不多有1.58G，如果我没有记错。这个操作不会保留你的手机上的任何数据，所以你需要做好备份，sd卡上的貌似音乐和图片什么的都在，地图和应用没有了
2 系统恢复到8.0后，开始一步一步升级，终于早今天早晨的时候成功了，当然我是一边睡觉，一边升级了，厉害吧？
于是现在成功了同志们，你们也阔仪尝试一下。不过应用什么的重新安装吧。
w-love

Updating developer preview still no satisfaction

I have updated software version of developer preview to 8.10.12382.878 after that while playing videos in browser still screen is getting black,music player still sucks 8.0 player was much better however hd videos are not lagging specially shows when i download and transfer to phone and play them they are now working fine but still there are alot of improvements to be made. Still while playing games specially small games like subway surfer they are closing automatically my device is Lumia 525 now i am frustrated what to do...

Music app is now a stand alone app in wp8.1. It will get update right from the store, not from system update.
A past Nokia X user, now a X user.

I had the developer preview for IOS 6 on my phone, and just got a message telling me that my operating system is no longer active. How do I get my phone activated again?

I had the developer preview for IOS 6 on my phone, and just got a message telling me that my operating system is no longer active. How do I get my phone activated again?
I had the developer preview installed. Never had to update to the release version of the OS. Now, the preview has expired, and I cannot use my phone because my iTunes reads my OS as being current, but my iPhone cannot active. Any ideas on how to fix this issue?

If I Google for Michael Superczynski, first match tells "Michael Superczynski's Profile : Apple Support Communities". It in fact does a lot of work there even if not paid.
And yes we do not have disagreement about "official apple developers". Problem is that Apple screwed our devices because we are "official apple developers" and did effort to stop us getting proper help. I unbricked my ipad and iphone thanks to unofficial help. Thank you who wrote this unofficial help and "no thanks" for apple for ruining my access to my devices. My mistake was assuming that "update" button on my devices works. It did not because it always told "Your device has latest IOS6 installed" until it bricked yesterday.
If Apple does not want to listen us, continue do delete post, blame us installing your software and yes we stop buying your devices and developing for them.
Tonu

Windows 8.1 apps downloaded during developer preview install in Chinese on RTM (MS requsted I post this here for script to fix this)

Hello
Ever since updating to the RTM version of Windows 8.1 on every PC I have updated and signed into using my Microsoft account whenever I try to install any 8.1 app I installed onto the developer preview version it will always install in Chinese which makes
using the app impossible for me.
This happens on all PCs I have updated/used including:
Surface RT (Windows 8.1 RT)
Surface 2 (Windows 8.1 RT)
Dell OptiPlex 990 (Windows 8.1 Pro)
Dell OptiPlex 790 (Windows 8.1 Pro)
Sony Tap 20" (Windows 8.1 Pro)
The language settings of the Microsoft store and all the computers are all set to UK English and as soon as I do a fresh install of the UK version of Windows 8.1 and sign into my Microsoft account then certain apps will always install in Chinese (when in
the store it says you already own this app and can install it on this PC - when I do it is in Chinese. When the app has not been installed before or was not installed when I had the developer preview then it will install in English).
This has been driving me mad for months and I previously posted this question back in October in the Office 2013 forums as I first noticed the issue with the OneNote app but it was never resolved:
http://social.technet.microsoft.com/Forums/office/en-US/448670ae-4494-4a55-8cee-d9f1c9873db7/onenote-windows-81-app-changed-to-chinese-and-cannot-work-out-how-to-change-to-english?forum=officeitpro#448670ae-4494-4a55-8cee-d9f1c9873db7
I then posted it a few days ago here:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_store/windows-81-apps-downloaded-during-developer/5dcd0df7-edfe-420e-8737-6a48922969e1
I have now been asked by a Microsoft Support engineer to post the question here as they said a script can be provided which I can use to fix this.
I think I just need to clear the fact that I have previously installed these apps as maybe some bug in the developer preview set them to Chinese and it seems to remember this setting. I cannot understand any Chinese so this makes these apps unusable.
The only other option I can think of is to create a new Microsoft account but I would rather not have to do this.
Some of the apps affected include the OneNote app and the HP scanner app. I have uninstalled most others and found alternatives.
Thanks
Robin
Robin Wilson

Hello jrv
I managed to run the script but cannot really see how it is any different to uninstalling the apps in the normal way except for the fact that you can uninstall multiple apps at once.
This exact same problem happens on a surface 1, a surface 2 and multiple machines running either Pro or Enterprise. It is not one machine but every machine running 8.1.
I have not upgraded from the Developer Preview version on any of my machines and always do a fresh install but what I am saying is that I did use the same Microsoft account during that time and it seems to have some record of the apps I installed at that
time and thinks I want them installed now in Chinese.
The only thing in common on the 7 machines I have tried (including the 2 surfaces) is that I have joined them to my Microsoft account and the problem seems to be with the Microsoft account and not with all the machines.
To replicate this I can go to any Windows 8.1 machine and join it to my Microsoft account and this will put certain apps from the store into Chinese and I can find no way to stop this. I am pretty confident that the issue is with the Microsoft account or
a setting that is synchronising from there.
The workaround is to sign into a different Microsoft account and this installs them correctly on the same machine.
I would appreciate any help with clearing out my history of installed apps without having to create a new Microsoft account.
Thanks
Robin
Robin Wilson

Camera on Lumia 822 Developer Preview Update 8.1 GDR1 not working, needs Cyan.

About 5 months ago when the 8.1 Developer Preview was released I went ahead and got it on my Lumia 822. Everything was going great. It worked flawlessly until Updated 8.1 to the 3rd small update that was released for it. Soon after my camera stopped working and soon after that my GPS started displaying very inaccurate results. When I use any app that uses the camera it instantly crashes and I know it is a firmware issue because neither camera works. Both cameras cause the app to crash if it tries to use the camera. I updated to 8.1 GDR1 thinking it would fix it and it didn't. This happened to me 4 months ago. The community says Cyan will fix it. I have had to deal with this for 4 months. 2 months waiting for Microsoft to give it to phone companies and now 2 months waiting for Verizon to push it out. Could someone at Verizon please give an ETA? I wasn't able to take pictures all summer. Not of my summer vacation or anything. I'm begging you Verizon to push the update. At least just for Lumia 822. I'm not the only one with this issue. If you go to the WPCentral forums or just Google it, many more people are having the same issue. I know I was risking it by using a "beta OS" but come on. Updates shouldn't take this long to get pushed.

No one told you to download or install the Microsoft Developer Preview.
That is not a Verizon wireless issue. It is a Microsoft issue.
maybe you can remove it and roll back until the real updated OS is shown to be stable and available.
And this is for both posters.
I can just imagine all the posts complaining how the updates caused this not to function or that no longer works when Verizon has nothing to do with those issues either.
After it is released by the cell carriers.

Windows 8.1 update Developer Preview from Microso...

If i update Windows 8.1 update for Nokia Lumia 925 from Developer whether it affects the warranty of the device.
If any problems whether nokia will support us. I have device having warranty for another 9 months.
If i update it now whether we will get offical stable release once it is rolled out
Solved!
Go to Solution.

The word from Microsoft is that it may void your warranty so there is no guarantee as to whether it will or won't, it is entirely at your own risk. Nokia says it will likely void your warranty but again that isn't confirmation that it will void the warranty. I have yet to see a case of warranty service being refused on a device running a developer preview.
If you update now you will be updated to the official consumer release and the Nokia Cyan update, probably in June.

Update on tooling with Java ME Embedded 8.1 Developer Preview

If you are having problems with connecting via USB or with static IP addresses, please see:
Update on tooling with Java ME Embedded 8.1 Developer Preview
Best,
-- Terrence

Hello,
I am just viewing this course now and am stuck on finding the raspberry pi 8.1 EA binary:
oracle-jmee-8-1-ea-raspberrypi-linux-bin-b01-20_may_2014.zip
The only thing I can find on this page (which is what the document your link brings up has)
http://www.oracle.com/technetwork/java/embedded/javame/embed-me/downloads/index.html
is 8.0:
oracle-jmee-8-0-rr-raspberrypi-linux-bin.zip
Please help...
Thanks

How do I erase mountain lion developer preview and go back to Lion 10.7? I do not have lion or data backed up on my Air

How do I erase mountain lion developer preview and go back to Lion 10.7? I do not have lion or data backed up on my Air
I need a step by step instructions since I have never done this before, willing to set up partition if needed.

If you installed Lion from the Mac App Store or got it with the computer, restart with the Option key held down and see if its recovery partition still exists; if it does, tab to it, use the Disk Utility on it to erase the Mountain Lion partition or repartition the drive, and install Lion onto the blank partition. If you installed Lion from the USB thumb drive, use that.
(65131)

How to go from Developer Preview to Official Lion OS X Release?

Hello,
Since its release, i've been playing with several Developer Previews of OS X Lion on my Macbook Pro. Then, Lion got out, in its official release. Unfortunately, I didn't have time to upgrade to it right at that time. I had a lot of work to do, and I've been using all this time a DP version. Now that I have some spare time, I want to upgrade to 10.7.2, and actually buy the Lion OS X from AppStore.
But surprisingly enough, AppStore says I allready have Lion on my Mac. Even when I open AppStore and holding down the Option key, I see the price of Lion, I clik on it, but it says a newer version seems to allready be present on my Mac. Wich is false, cause I sopped updating somewhere around 10.7.0, on a DP version.
Even if I modify the "SystemVersion.plist" file, I still can't buy the official Lion.
And as you might know, iCloud comes only with the 10.7.2 version of Lion. And I would realy like to take advantage of it as I've always been a MobileMe customer.
Does anyone have an idea of how to get that update and how to pay for Lion?
Thnak you in advance!

Since its release, i've been playing with several Developer Previews of OS X Lion on my Macbook Pro.
it says a newer version seems to allready be present on my Mac. Wich is false, cause I sopped updating somewhere around 10.7.0, on a DP version.
In addition to the other suggestions, you cannot download any version of Lion as long as you have any version installed (the background store agent scans not only your internal, but any externals that are attached and will not allow a download if it finds any trace of Lion). Since you chose not to heed the notices to update your versions for that many months (if you were/are on an actual pre-release version from Apple), there is only one solution: you must wipe your hard drive, reinstall Snow Leopard, and then go back to MAS and purchase Lion legally. And, to reiterate, you should not be asking these questions here.

Library Preview displays at lower resolution than Develop Preview

I recently bought a Nikon D7100.
I took some test shots and imported the images to Lightroom 4.4, then generated 1:1 previews for all the images.
Previews zoomed to 1:1 in Library Mode are noticeably soft. The image below is a screen shot of the Library preview:
Moving to Develop View produces a higher-resolution 1:1 preview. The image below is a screen shot of the Develop preview:
Look at the bricks and window screens to see the difference.
This difference occurs immediately after import (with a User Preset applied during import). Once any Develop work is done, the Library preview updates and displays at full resolution.
This problem makes doing initial editing/selection of images time consuming, because I can't determine the sharpness/quality of imported images until I've done some kind of Develop adjustment on each image.
If anyone has a circumvention or solution to this problem I will appreciate receiving it.
Thanks,
Brett Rowett
Sacramento CA

BRSac wrote:
I recently bought a Nikon D7100.
I took some test shots and imported the images to Lightroom 4.4, then generated 1:1 previews for all the images.
Previews zoomed to 1:1 in Library Mode are noticeably soft.
This difference occurs immediately after import (with a User Preset applied during import). Once any Develop work is done, the Library preview updates and displays at full resolution.
You said "then generated 1:1 previews for all the images," so I assume you manually selected Library> Previews> Render 1:1 Previews from inside the Libray module. Selecting 'Render Previews : 1:1' in the LR Import module under 'File Handling' will automatically render the previews on import.
There are two possibilites why you are seeing low-res 1:1 Library previews:
1) The Previews were still being created in the background after import, and you are trying to edit images that do not yet have a 1:1 preview.
2) You inadvertently cancelled the 1:1 preview rendering process by a) closing the progress bar in the upper lefthand, or b) closing LR before completion of 1:1 Preview Rendering.
I would NOT reccomend discarding 1:1 Previews since that will create the very situation you are complaing about in this post. If you are low on hard drive free space then this recommendation would be helpful.

OC4j Developer Preview problem with JDBC

I'm running the developer preview of OC4J (9.0.4) and trying to get a connection to SQL Server 2000 for my CMP 2.0 entity beans.
I have a setup and configuration that works on Orion 2.0, but when I moved it over to OC4J it no longer worked. I get an error
SQL error: Io exception: The Network Adapter could not establish the connection
I checked my data-sources.xml file to make sure the syntax was OK and the driver url and properties were correct (they worked on Orion so they should be), and they looked OK.
This fails both with the JSQLConnect driver and with the recommended DataDirect driver. For the latter my data-sources.xml entry looks like:
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="MSSQL"
schema="database-schemas/ms-sql.xml"
location="jdbc/foo"
xa-location="jdbc/foo"
ejb-location="jdbc/foo"
connection-driver="com.ddtek.jdbc.sqlserver.SQLServerDriver"
url="jdbc:sqlserver://localhost;DatabaseName=foo;User=foouser;Password=foo"
username="foouser"
password="foo"
max-connections="5"
min-connections="2"
inactivity-timeout="30"
/>
The same URL works fine using DataDirect's JDBC Test utility.
I can't find anything useful in any of the OC4J logs and have basically run out of options to get OC4J working.
Any help much appreciated.
Thanks
Alan

Hi Steve
I had the JDBC driver jars in j2ee/home/lib (with pointers via <library> tags in server.xml).
The j2ee/home/applib directory didn't exist so I created it and copied the driver files there but alas it didn't help. (I also modified the appropriate <library> tags in server.xml but that didn't help.) I still get the same error.
When I removed the JDBC driver jars altogether then I did get an additional error:
Error initializing data-source 'jdbc/foo': DriverManagerDataSource driver 'com.ddtek.jdbc.sqlserver.SQLServerDriver' not found.
So it looks like the underlying problem is not inability to load the jars.

2 questions, 1 I tried to download developer preview 2, and it did not complete and now I cant redeem again. Is there a way to fix without calling the 800

2 questions, 1 I tried to download developer preview 2, and it did not complete and now I cant redeem again. Is there a way to fix without calling the 800, 2 if i put all itunes in the cloud do i have to store it on my machine still, can i delete movies etc, on hard drive

If you mean the Developer preview of OS X 10.8 Mountain Lion you need to be posting this to the appropriate developer forum or AppleSeed forum. We can't help you with software that hasn't been released.
Your second question seems to be related to iTunes Match, yes? Try posting it in that forum.

JDeveloper 10g (10.1.3) 10.1.3 Developer Preview: can't start embedded oc4j

With Oracle JDeveloper 10g (10.1.3) Developer Preview, I tried to make a simple jsp page as in this tutorial:
http://www.oracle.com/technology/obe/obe9051jdev/visual_jsp/intro_to_visual_jsp.htm
I only added some text then right-clicked file, selected Run. It didn't work:
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
/my/home/marius/jdevhome/system/oracle.j2ee.10.1.3.3.51/oc4j-config>
/usr/java/j2sdk1.4.2/bin/java -client -classpath /my/home/data/opt/jdeveloper/j2ee/home/oc4j.jar:/my/home/data/opt/jdeveloper/jdev/lib/jdev-oc4j-embedded.jar -Xverify:none -DcheckForUpdates=adminClientOnly -Xrs -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doracle.dms.sensors=NONE -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config /my/home/marius/jdevhome/system/oracle.j2ee.10.1.3.3.51/oc4j-config/server.xml
[waiting for the server to complete its initialization...]
05/04/08 09:02:24 Node started with id=127765687050882
05/04/08 09:02:27 Auto-unpacking /my/home/marius/jdevhome/system/oracle.j2ee.10.1.3.3.51/oc4j-config/applications/dms0.war... done.
05/04/08 09:02:27 Auto-unpacking /my/home/marius/jdevhome/system/oracle.j2ee.10.1.3.3.51/oc4j-config/applications/admin_web.war... done.
Apr 8, 2005 9:02:29 AM com.evermind.server.XMLDataSourcesConfig parseRootNode
INFO: Legacy datasource detected...attempting to convert to new syntax.
05/04/08 09:02:37 Copying default deployment descriptor from archive at /my/home/marius/jdevhome/system/oracle.j2ee.10.1.3.3.51/oc4j-config/connectors/datasources/datasources/META-INF/oc4j-ra.xml to deployment directory /my/home/marius/jdevhome/system/oracle.j2ee.10.1.3.3.51/oc4j-config/application-deployments/default/datasources...
05/04/08 09:02:37 Copying default deployment descriptor from archive at /my/home/marius/jdevhome/system/oracle.j2ee.10.1.3.3.51/oc4j-config/connectors/OracleASjms/OracleASjms/META-INF/oc4j-ra.xml to deployment directory /my/home/marius/jdevhome/system/oracle.j2ee.10.1.3.3.51/oc4j-config/application-deployments/default/OracleASjms...
05/04/08 09:02:42 Copying default deployment descriptor from archive at /my/home/marius/jdevhome/system/oracle.j2ee.10.1.3.3.51/oc4j-config/applications/admin_ejb.jar/META-INF/orion-ejb-jar.xml to deployment directory /my/home/marius/jdevhome/system/oracle.j2ee.10.1.3.3.51/oc4j-config/application-deployments/default/admin_ejb.jar...
05/04/08 09:02:42 Auto-deploying - applications/admin_ejb.jar (orion-ejb-jar.xml had been updated since the previous deployment)...
05/04/08 09:02:45 Auto-deploying - compiling and loading...
05/04/08 09:02:45 done.
05/04/08 09:02:46 Error initializing server: Error initializing ejb-module; Exception java.io.IOException: /my/home/data/opt/jdeveloper/jdev/bin/ojc: cannot execute
05/04/08 09:02:47 Fatal error: server exiting
Process exited with exit code 1.
For a simple stand-alone java application, it worked.
I have sun jdk 1.4.2 on Fedora Core 3.
Don't know if there are similar bug reports, I searched this forum for "10.1.3" but the search page stays like that for ~2 minutes, then stops without showing anything.

Hello Frank,
Thank you for your suggestion. I tried that and I got the same error. Looked more careful at it:
Exception java.io.IOException: /my/home/data/opt/jdeveloper/jdev/bin/ojc: cannot execute
I tried to execute it manually:
$ l /my/home/data/opt/jdeveloper/jdev/bin/ojc
-rw-rw-r-- 1 marius marius 1.9k Dec 2 19:20 /my/home/data/opt/jdeveloper/jdev/bin/ojc
$ /my/home/data/opt/jdeveloper/jdev/bin/ojc
bash: /my/home/data/opt/jdeveloper/jdev/bin/ojc: Permission denied
Did
$ chmod a+x /my/home/data/opt/jdeveloper/jdev/bin/ojc
which solved the execution. Now Hello word works.
I got jdeveloper as a .zip archive, which doesn't keep unix permissions. The Linux distribution should be in .tgz archive, it would have avoided this problem.
Thanks!

Glance 2.0 IN WP8.1 Developer Preview

Similar Messages

Maybe you are looking for