Glance screen and night mode

At night, I'm keeping my Lumia 925 connected to the charger, in a small stand to see the time when I happen to wake up. The problem is that whenever e.g. an email arrives, the screen lights up and wakes me (our even worse, my wife) up.
Is there a way to set up the night glance screen so that the screen just shows the time, number of messages etc. data, but doesn't light up?

kaaremi wrote:
At night, I'm keeping my Lumia 925 connected to the charger, in a small stand to see the time when I happen to wake up. The problem is that whenever e.g. an email arrives, the screen lights up and wakes me (our even worse, my wife) up.
Is there a way to set up the night glance screen so that the screen just shows the time, number of messages etc. data, but doesn't light up?
No, none that I see.
In notifications you can turn off  glance notification banners but this effects glance  all the time.

Similar Messages

  • Does lumia 735 have a glance screen, and when will...

    I have a lumia 720 and i am addicted to glance screen and don't know whether lumia 735 will have a glance screen as lumia 730 lacks glance, glance is a key feature that attracts me to a windows phone.

    Hi, tausifkhan7. Thanks for posting. The Lumia 735 does not support the Glance screen feature. To see the available features for each phone model, see : FAQ - Which features does my Lumia phone support? 
    Hope this helps.

  • Having issues with 13" MacBook Pro. Running very slow and blank screen and sleep mode.

    Bought my MBPro summer 2009. About a month / 6 weeks ago it began to run extremely slow at points. Now it is running poorly and getting very slow on a daily basis, to the point where it will not open applications, documents or even web pages for in excess of 5 minutes. I'm beginning to lose patience!
    Also at the exact same time of these performance issues occuring, my MacBook Pro will not awaken from sleep mode when the lid is closed. Showing a blank dark screen and having to hard reset in order to boot up my system again and get it running.
    What is the best solution in order to resolve these issues?
    Your help is greatly appreciated.

    Did you run Disk Utility>First Aid?  If so what were the results?  This is a copy of mine, note that the bottom line says:  The partition map appears to be OK:
    Ciao.

  • IPod Touch hangs with blue screen and restore mode also fails

    My daughter's iTouch 3G crashed last night while she was playing a game came up with a blue/green screen and couldn't turn off. Tried reboot which brought it back to Apple Logo where it stayed for about 10mins. Then tried restore. Managed to get as far as connecting it to iMac and going through restore process to "restoring iPod software" until that hangs too - with "iPod couldn't be restored Unknown Error 1603". Tried again with Error 9.
    Have followed troubleshooter - have latest itunes, USB settings, firewall etc. Works fine with my iPhone.
    Any ideas or is the iTouch screwed?

    Common, no one has any ideas?  Well, don't know if this will help, but here's some new data to process.  I noticed that when I was trying to load the firmware with Redsnow w/o installing any options to include Cydia I got errors displayed on the Ipod such as WMR NAND format invalid; NANDLegacyFTL failed.  Someone has got to know something.  I would appreciate any ideas or thoughts from anyone with any idea.  Thanks

  • HT1349 Need Help. Grey Screen and Safe Mode Problems

    I had to pull a hard shut down on my mac and when I tried to start it up I get the apple grey screen and the rotating circle and it just stays there. Tried to boot in safe mode, says:
    can't find root user. Sleeping and trying again
    can't read user-specified  hostname
    disk0s2: 0xe0030005 (UNDEFINED).
    I don't have the start up disks, what do I do?

    You are very welcome Ghoss! Thank you for using the Support forums
    If you continue to have problems with the volume button do not hesitate to contact your support center. You can verify your warranty status here.
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • Blue screen and recovery mode

    Have iPhone 5s 16gb with iOS 7.1 phone only 3wks old but everytime I charge it when I take off the charger it goes into recovery mode and it's also is doing the blue screen of death what can I do in this situation

    Hi solapink,
    The resource below will provide the steps to restore your iPhone. You may need to repeat steps 1 through 3 a couple of times to put your device in recovery mode.  If you see an iTunes error, please make a note of exactly what it is and reply to this thread with that information.  
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/HT201263
    Regards, 
    Judy

  • Set object to precence = 'visible' both in screen and print modes

    Hi folks,
    In my form, I have a check box which toggle visabillity of some table object.
    i'm using 'visible' and 'hidden' values in the presence propery for the toggling.
    It's all work fine except when i'm printing the form - the "visible" table is not printed.
    How can I make it visible also for print mode?
    Yair

    If the table is visible, then it should print unless you have done one of the below..
    1) Setting the presence property of the table to visible(Screen Only)
    2) write code in prePrint event to hide the table.
    If you have not done any of the above then try placing the code in the prePrint event to make the Table visible.
         You can place in the CheckBox prePrint event with JavaScript as language.
         //Check if the Check box is checked.
         if(CheckBox1.rawValue =="1")
              Table1.presence = "visible";
    Thanks
    Srini

  • There is no firefox red icon anymore on my screen and no bookmarks - just disappeared.

    Last night my internet went out and today when I turned my computer on there are no bookmarks and no firefox button in firefox. I cannot go to firefox and go to so and so because there is no firefox button.

    It's possible that Firefox started up in Full Screen mode. To switch between full screen and normal modes, you can use the F11 function key. In full screen mode, you also can slide your mouse pointer all the way to the top of the screen, right-click, and get the option to exit full screen mode.
    Was that it?

  • I'm having a minor problem with "screen drift" - the page moves slightly up and down when moving my mouse around the screen, and continues to do so after stoppi

    I've installed the latest version of Shockwave, updated the driver from Logitech for my mouse (Logitech M525), tried both full screen and regular modes, restarted Firefox repeatedly. This drift is very annoying - I spend the majority of my time on FB - seems like the amount of drift varies from not at all to "damn it, I can't even place my mouse on an object without the screen moving".
    I'm on Windows 7 with an Acer V5-671 laptop - help please!

    You can check for problems with current Flash plugin versions and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Turn Auto Attendant into Night Mode Manually

    I have set an auto attendant to automatically play the day and night mode based on business hours on Unity Connection with CUCM 8.0. But client wants to turn on the night mode manually when the receptionist is leaving before the closing hour, and turn off the night when come in early. And they still want to play the day greeting during normal business hours. Which option available in Unity Connection that can handle this. I can set up night mode manually ok, but will lose out the day greeting. How can I achieve this with both day and night greeting.
    Thanks.
    Dat Pham

    Configure a separate call handler and have the recepcionist set CFA for this.
    All she needs to turn this off/on is to set CFA to a predefined DN.
    CUC can only work based on pre-defined schedules.
    HTH
    java
    If this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • My iPhone would just randomly give me a blue screen and then restart--did that a bunch of times between Tuesday and last night. As of last night, it WILL NOT come back on. iTunes says it's in recovery mode....what does all of this mean???

    Tuesday night I was texting a friend and when I went to open her message, my screen went blue and restarted. I just wrote it off as weird and went on about my business. Later that night, I tried to turn on my phone and it would not turn on. I plugged it up, held down the power button, and pressed the home button all numerous times. I looked online and it said to do a "hard reset" by holding down the power and home button at the same time--my phone then came on. Throughout Wednesday, it would give me a blue screen and restart--nothing major just really annoying. I took it to the local Verizon store where I bought the phone from and he said that it was some type of hardware defect and I was still under my year warranty so I could get a new one for free--the free phone won't be here until tomorrow, Saturday. I took it home and it didn't give me any trouble for a couple of hours. The next day it was cooperating and then I left town for a little while and it acted up (blue screen and then restarting) a few times. When I got home, it acted up again and so I restarted the phone and it was working fine. A few minutes later, I tried to check my messages and the phone was off again. No matter what I do, my phone will not come back to life. It had at least 45% battery last time I looked at it. I decided to plug the phone up to my computer and see what it did--my computer recognizes that there is a phone hooked to it and it says that it's in "recovery mode". It also said that if I'm having issues with my phone, that I need to reset the phone via iTunes. I guess the questions that arise are
    1. Why is my phone doing this?
    2. If I reset my phone, will it go back to working again? I ask that because I don't want Verizon to charge me $300 when they send me the replacement phone and I won't need it (assuming that the phone decides to work once it's been reset).
    3. What type of hardware defect is this that is causing this issue, not only with my iPhone 5S but others as well?
    4. Shouldn't people be notifying Apple and letting them know that they need to fix this issue?
    5. Should I report this issue to Apple even though I didn't buy the phone directly from them, but through Verizon?
    Any help that anyone could give me would be greatly appreciated! This whole situation has me stressed out and seriously confused.

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • My White Macbook is stuck at the loading screen, and disk utility, safe mode doesn't work either. What should I do?

    I went on vacation a few days ago and in El Salvador, they have this mobile broadband sticks. Well, I was using one until it gave me a network error. After that, it shut down my computer entirely. The first time it happened, I didn't think much of it. I took the battery out and put it back in for it could work. It happened another two times, and after the third time, my MacBook stays stuck at the loading screen, and it will take 5-10 minutes on that screen, before it shuts down, or it wouldn't turn on at all. I've tried booting into safe mode, but it appears to not boot into it. I've tried resetting the Pram, and using disk utility, but that still won't work. I don't know what else to do to make it boot into  OS X  Lion.
    I'm an AP student, and the majority of my work is in that computer, and it is very important! What can I do? Not only that, but I enter school in a few weeks and I need the AP work by the time I enter.
    What can I do? Can someone help?
    Thanks

    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • TS1368 HELP!!! After upgrading to IOS 6.13 my IPAD Stucks in a plug-in screen and the Itunes. When i Try to connect to iTUNES pop-up message apear "iTunes has detected an iPad in recovery mode.. You must restore this iPad before it can be used with iTunes

    I have windows 8 enterprise OS and iTunes ver. 10.5.0.142. I was upgrading my iPad to IOS 6.1.3. After finishing the upgrade my iPad Reboot and currently stucked-up in a plug-in screen and iTunes Logo. When I try to connect it to the iTunes pop-up message appear saying " iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes." In short, I push the restore button then another pop-up message appear saying " The iPad software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." I tried many ways but still no luck. I repeatedly reboot the iPad and open the iTunes still the same problem. I try also to uninstall the iTunes and installed the lower version but still the same problem, I even check the firewall if the ITunes was block or My privileges is administrator to run the iTunes or even reset my winsock but the problem still remain. PLEASE HELP! Thank you in advance!!!

    Turn off your firewall and antivirus software.

  • I too had the same vertical white line in the centre of the screen last night after having my iPhone 5 up and running for 10 days. I managed to turn it off by holding the buttons in and it came up with the iTunes screen....2 hours later it came good?

    I was talking outside on my iPhone 5 in a fairly humid environment (The Pilbara in January, 2014) then when the call was finished I hung up (as I was walking back inside to the air-conditioning) this white vertical line appeared in the centre of the screen and wouldn't go away. I couldn't use it NOR could I accept calls. (I called my number from my other phone). I eventually managed to turn it off after removing the protective casing (Otter Box) and then it came up with the white cord / iTunes screen........I left it for a while...it turned back on BUT is still had a flickering screen.......I re-charged it and I have backed it up this morning (at work) on iTunes and it seems to be working 'fine.' All I can say is 'DO NOT GET RID OF YOUR SAMSUNG GALAXY PHONE IF YOU HAVE ONE!' I haven't had an OUNCE of trouble with it and have owned it for at least 3 years. The iPhone has been up and 'running' since the 6th of January, 2014. This happened on the 15th of January, 2014.

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • Ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help

    ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help and my itunes will not see that its connected. i also tried going though control panel and restarting the service and nothing happens. also i tried redoing the driver but its saying it cannot find any drivers for it

    lol ok nvm i fixed it

Maybe you are looking for