Glance Screen On Pluggin Only

Is there any chance that Nokia would consider allowing Glance Screen to only come on when plugged in? With my current usage, having it on peak or glance with my Lumia 920 kills the battery too fast, but I would love to use it as a night clock.
Unfortunatly, there is no way to have glance only come on during night hours, or when plugged in and not also intermitantly or on peek.

Unless you check the screen eveny minute or so how is having it on peek drain the battery?
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Similar Messages

Lumia 730 wifi issues and glance screen option

Hello Champs
I am having issues with wifi.
Though the wifi is connected, i was not able to use internet either browse / apps.
The wifi only works then, need to off and on.
This is happening right from the start of purchase.
Sometimes i use to soft reset and use, it works fine for the halfday and there goes issue again.
Previously i was using Lumia 720, and upgraded to 730 due to dual sim, with the same wifi router at home and at office.
Could you please help here.
Also why there is no Glance Screen option in Lumia 730.
Why Why...lumia devices(hardware) differ from one device to other devices though its a same combinaiton of Hardware + Software.
Regards, Siraj.

Perhaps you might want to consider trying the Software recovery tool wichi you can download using the link below.
http://www.microsoft.com/en-ie/mobile/support/faq/?action=singleTopic&topic=FA142987

Lumia 928 - Glance Screen Problems

I have just updated my Lumia 928 to WP8.1.1 & Denim. When I try to engage the Glance Screen settings, all I get is a blank screen w/ the Glance Screen Header but no controls. I have tried restarting the phone and about everything else i can think of to no avail.
Any suggestions?
Solved!
Go to Solution.

I have the same issue - it seemed to be fixed after I rolled the phone back to factory settings and restored my backup. But when my apps all finally updated the issue occured again. Clearly seems to be a problem with the Glance update since it occured right after that went through.
For me, the glance settings are blank and when I put the phone to sleep I can still see that the screen is still on although it does not show anything from glance. Also, the back, home, and search buttons no longer illuminate. This is super annoying since not only can I not see my glance screen but now my battery drains much faster due to the screen being on.
Did you make any progress with the SW recovery tool?
Lumia 830
OS Version: 8.10.14176.243
Firmware: 02040.00012.14404.07019

Problem with glance screen on lumia 820

I have a problem with my Lumia the glance screen does not work,only works when the phone is exposed to the sun or any light and when is not it doesn't shows up,when is always does not work the same with peek and the other ones, I need help I have this problem since the update please reply me.

hi mate,
have you checked that you are up to date with all the latest Nokia system app updates from the Store? also try performing a soft reset too.

My phone stuck on the log in screen and the only thing apears the apple logo why is that happening?

my phone stuck on the log in screen and the only thing apears the apple logo why is that happening?

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...

I have a problem with the iTunes Store, I have an ipod and an iphone 2. I have a PC with Windows Vista Home Premium 2007, entering into iTunes Store on the main screen I get only AppStore, Podcast and iTunesI have a problem with the iTunes Store, I have a

I have a problem with the iTunes Store, I have an ipod and an iphone 2. I have a PC with Windows Vista Home Premium 2007, entering into iTunes Store on the main screen I get only AppStore, Podcast and iTunes U. In my screen I get only ipad2 Podcast, iTunes U Downloads. My problem is I can not access any application to download music, videos, books, etc..
ITunes will be installed wrong or what should I do to activate these options?

Go to the front page of the Store, and click Change Country. Make sure it is set to the country where you actually are.
Then you will be able to see everything that is for sale in your country, which, depending where you live, might or might not include music.

MacBook pro will not boot. I get the gray screen, an apple icon and spinning wheel. Tried to start in safe mode but get the same screen. The only thing different was that I loaded the zedge sync app yesterday. Now getting this problem.

Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.

Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
Run the Startup Manager to select Startup disk: http://support.apple.com/kb/HT1310
If those did not work your disk may be sick or dying. The top priority at this point is to make a backup copy of your data.
Check the health of the disk. Boot in Recovery Mode (Boot, Command-R). Run Disk Utility. Click on the upper left disk icon. Does the S.M.A.R.T. status say “Verified”? If not the disk/SSD is unhealthy and needs to be replaced. Even if it does not show “Verified” you can still attempt a backup.
Click on the icon indented below, usually called “Macintosh HD” and Verify Disk. If it finishes with a green “OK” message then all is well with the disk. If it shows errors in red then you have found a problem to address once the system is backed up. Do not attempt software repairs until you have secured the data.
If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable. A trip to an Apple store for confirmation would be in order.
If you have an external disk drive you can use as a backup drive then do so. If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one. Any 1 TB external drive will do.
Assuming it is still breathing you can try to recover the data without booting from the sick disk.
Reformat the external disk. (This will erase all data on the external disk.)
Boot in Recovery Mode. Start Disk Utility. Plug in the new disk. Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
Partition Layout > Single Partition
Name: Emergency Recovery 1 (or whatever name you wish to use)
Format: Mac OS Extended (journaled)
Options… > GUID Partition Table > OK
Apply
Select the Restore tab.
Drag the old system volume (Macintosh HD) to Source.
Drag the new disk volume (Emergency Recovery 1) to Destination.
Click on Restore.
It may take a long time for the backup.
If that will not complete post back for other emergency data recovery methods, including those from a brody.
If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk. If it does not finish with a green OK message try to repair it once or twice more. If it repairs with a green OK message, will it boot normally? If not, boot from the Recovery Partition and reinstall OS X.
If it is still not healthy, post back for further instructions.

Can we modify the pnp selection screen and get only month and year?

Dear Freinds,
              I have requirement where i have to modify the PNP selection screen. So with the help of report category and coding in AT SELECTION-SCREEN OUTPUT , i have modified all the fields relating to dates . i.e i have removed all the radio buttons (i.e Today, Current month,current year etc) and finally
i have landed with only Period ( PNPBEGDA & PNPENDDA range) . But i dont want the PNPBEGDA & PNPENDDA range , but i want only is the month and year ( i.e just like the PNPPABRP & PNPPABRJ)
on my selection screen along with the pernr .
i have used the below code to close all the fields except pnpbegda and pnpendda.
AT Selection-Screen output.
loop at screen.
IF screen-group4 = '098' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '092' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '094' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '100' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '104' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    MODIFY SCREEN.
endloop.
i.e on my selection screen i want only month & year combination and pernr -
when iam using the logical database PNP . Could any one please let me know how can i get only mon & year only on my selection screen .
If it is possible please let me know .
Thanks & regards
divya.

Hi ,
   The requirement is that the user doesnt want to enter the date range i.e for ex: 01012008 to 31012008.
As per the requirement the user will enter only the month and year only . so i on the selection screen
i want only the month and year only . Is there any means i can modify the date period which is there by
default (PNPbegda and PNPendda) on PNP selection screen. Instead of we givign to the user the
PNPBEGDA and PNPPENDA i want is only month and year .
AS already the code has already been written and now they have asked that they want only the month and year on the selection screen.
Please suggest me in this regard.If iam hiding all the buttons relating the dates fields, and now if iam adding the parameters for the month and year it is coming below below the fields pernr , personnel ara and subara , company code , payroll area, employee group of the standard fields of PNP selection screen , there by any body could please suggest me how to change.
regards
divya.

Safari 7.0.6, using Adobe Acrobat 11.0.10, aren't rendering pdf files in the Print Preview screen. Additionally, only a single, blank page prints for a multi-page pdf document. Any ideas?

Safari 7.0.6, using Adobe Acrobat 11.0.10, isn't rendering pdf files in the Print Preview screen. Additionally, only a single, blank page prints for a multi-page pdf document. Any ideas?

Figured it out. It had nothing to do with the software levels of Safari or Adobe Acrobat. Here's the fix:
Open Finder/Applications
Search "Internet Plug-Ins"
Move any Adobe plug-ins to the trash
Quit Safari
Launch Safari
Your pdf document should now render in Print Preview and print properly.

The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

The startup disk may need repairing ...
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If the disk needs repairing, restart your Mac while holding down the Command + R keys. From there you can access the built in utilities in OS X Recovery to repair the startup disk.

Trying to sync iPhone to pc but keeps getting internal device error on screen, also showing only 4gb size instead of 32gb. Uninstalled iTunes from pc and reloaded. Powered back up and all songs and info still in place. Anyone had this problem before?

Trying to sync iPhone to pc but keeps getting internal device error on screen, also showing only 4gb size instead of 32gb. Uninstalled iTunes from pc and reloaded. Powered back up and all songs and info still in place. Anyone had this problem before?

Doublechecking something Emcee. I see you've got Windows 7 x64, so I'm assuming you've got at least 4 GB of RAM. Do you also have an NVIDIA USB EHCI chipset on that PC? If so, see the following Microsoft document:
[You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM|http://support.microsoft.com/kb/976972]

Glance screen update for lumia 520

Why will 520 not get glance screen update..? Im aware tat both 720 n 520 chip set ram everything is same.. But y shld 520 users miss it?
Solved!
Go to Solution.

I was told that the type of screen used on the 520 wasn't compatible with glance screen which could make sense as the screen is of noticeably lower quality than the one on the 620 and 720. So perhaps it wasn't possible to add that feature without it being a massive battery drainer.
I don't think they've withheld the feature just to make you buy a better model.

Screen tearing, but only on Retina display?

Hello,
Here's the situation...
I'm noticing screen tearing, but only on my Macbook Pro's retina display, not the external display that's also connected to it.
Here's my setup:
- Macbook Pro w/ Retina Display (Late-2012)
- External Monitor is an HP w2007 (1680 x 1050) and is connected to my rMBP's HDMI port via an Apple HDMI-to-DVI adapter
- I'm running Mavericks
- Testing using www.speedtest.net
When I run the speed test on the w2007 monitor, everything is fine. However, when I run it on my retina display, the speed meter indicator needle always tears.
Is anybody else seeing this?
Can others, especially with external monitors, perform this test and post your results here?
Thanks!

leroydouglas wrote:
Take in for a free assessment:
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do
Thanks. If I can't figure it out on my own, or with the help from this forum, I will do as you suggested.
To be honest, it's not affecting me that bad right now (I'm not doing a lot of gaming), but it bothers me that my superior retina screen is exhibiting tearing, but my old HP monitor is not.

Glance screen no longer available?

I recently lost my nokia lumia a 822. I replaced it with the same phone. I have installed all updates and am current at this time. A feature I really loved on my last phone was the glance screen. It does not show up on the settings menu on this phone. Has it been removed? Is there a way to add it?

That was what I needed. I don't remember installing it as an app
previously. Thanks
In a message dated 7/25/2014 10:19:20 A.M. Eastern Daylight Time,
[email protected] writes:
         (https://community.verizonwireless.com/)
A message from the Verizon Wireless Community
(https://community.verizonwireless.com/)
      (https://www.verizonwireless.com/wcms/consumer/explore.html)
(http://www.verizonwireless.com/wcms/consumer/shop.html)
(http://www.verizonwireless.com/b2c/myverizonlp/)   (http://www.verizonwireless.com/support/)
Glance screen no longer available?
created by primortal
(https://community.verizonwireless.com/people/primortal)   in Nokia Lumia 822 - View the full discussion
(https://community.verizonwireless.com/message/1116065#1116065)

How to stop mozilla from closing multiple intenet screens, when I only want to close one?

I switched from Internet Explorer to Firefox. I often have more than one internet screen open. When I go to close one of them, Firefox sends me a message like, "You are about to close 3 tabs." When I tell it to close, I lose all 3 internet screens. I only want to close one. How can I stop that?

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can try to open a new windows via Ctrl+N and use that window instead.
See also:
*http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features

Glance Screen On Pluggin Only

Similar Messages

Maybe you are looking for