Glass cracked and power button stuck need to replace both
My daughter has an iPod touch 8GB and the glass is cracked, and the power button is stuck, and she forgot her password, and we are investigating the possibility of getting parts and fixing it.
Hello, James.
Thank you for visiting Apple Support Communities.
I am not sure what model iPod you have; however, here is the list of prices to repair an iPod.
Service Answer Center - iPod
Cheers,
Jason H.
Similar Messages
-
Support issue with X230 problem charing and power button stuck.
My X239 is not charing to the full 100%, I have two other Thinkpad models that my parents and they all change to 100%.. This is newer than theirs. Also the power button on the laptop is not flexing enough, you wont fee if you are pressing it. I send this for repair twice and its not fixed yet.I wonder the support tech read the whole desciption of the trouble or just goes by the category of the trouble. I like to talk to someone to make sence but its all automated. I am so much dissatisfied with their service and the product itself.
Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that battery of your Lenovo ThinkPad X230 is not charging to 100% and the power button is stuck.
I would suggest you to follow the below troubleshooting steps.
Shutdown, unplug AC and remove battery. Press and hold power button for several seconds. Then re-install battery and AC and restart and see.
Download latest Power Manager and Power Management driver.
Uninstall Power Manager and Power Management driver that is already installed.
Reboot the laptop
Install Power Manager and Power Management driver
Reboot laptop again and see if helps.
Go to Power manager -> Battery tab in advanced view -> Battery maintenance -> Select always fully charge ->Ok and restart the system.
Ensure that the system is plugged-in and that battery firmware is up-to-date. Check the Lenovo support site for any battery firmware updates for your particular model. Perform battery gauge reset. This will allow the battery to relearn available capacity. Update BIOS to the latest level.
Regarding the power button, you may have to disassemble the system and reseat the button. Refer hardware maintenance manual to perform disassembly of the system. Otherwise, you may have to report the issue to Lenovo technical support again. Sorry for the inconvenience.
Please post back with the results!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
my ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.
You need to connect to iTunes and restore.
iOS: Not responding or does not turn on
You may need to put the device into recovery mode, this is covered in the link on this page.
Did you back up the device? -
After I dropped my Iphone 4s my back glass broke and now the screen won't turn on neither respond to touch but i can hear incoming calls and notifications. I tried pluggin to computer/other power sources and also tried pushing the home and power button together for about 20 seconds
It's broken due to neglect, namely being dropped. Replace it.
-
My ipod comepletly froze and ive googled and youtubed ways to fix it! its on recovery mode and when i hold the home and power button it shows the apple button for a second and then it shows recovery mode again! i need help i DONT wanna restore!
ive read that alot of ppl are having this problem i need my ipod so if someone can help me ASAPHere is what you should do turn the device on hold the home button and the power button until the device turn off keep holding and when the device reboots release the power button but hol the home button until it shows the iTunes logo then restore it
-
i have connected it to itunes like i was told to do and it wont do anything because its locked with a passcode and its frozen on the lock screen and will not let me enter myt passcode and after a while it just shuts off, it has been doing this for almost 48 hours. I was told to hold the home button and power button to shut it down and that I could then restart it and it would work... Nothing has helped, What can I try???
Reset the device by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.
If that does not resolve, restore the device via iTunes on the computer.
If all else fails, take the device to Apple (or whomever provides support in your country) for evaluation and possible replacement. -
My ipod took a dump on me yesterday at work when the power button stoped working on the top. Now ive only had it for about 6 months and my question is will this be covered by the warranty? Also the touchscreen is cracked but works fine will they make me pay for the screen even though i just need the power button fixed?
I had this question too and I brought my nano to the genius bar (remember to make reservation before going), they let me pay HK$488 and issued me a brand new 6th, exactly the same model of the one I had! Super satisfied, you should have a try too.
My previously replaced 6th nano the power button stuck, I think because I made use of the fast key of skipping the songs (pressing the home button twice while playing songs), the button I guess suggested to be over-used.
Good luck -
How do I stop an app from waiting? I have tried to reboot by holding the home key and power button to power down. The app is still grayed out and waiting so it cannot be deleted. Also, I have tried to sync the apps from my laptop and tried downloading new appswith no success. Can you help? Thanks
If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
How to Solve the Problem of An iPad App Download Stuck on “Waiting”
http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
How To Get Rid Of Your iPad App Download Frozen Problem
http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
Another thing to try - Turn the iPad Off & then back ON.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
Cheers, Tom -
I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplainFirstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
It isn't the retail version, because that's 10.6.3.
Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
OK the language page.
From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult. -
My home and power button is not responding after I deleted an app from my settings. Can anyone help?
I went to update my iPhone 4 to the new iOS 7 but needed to create some space. After deleting a couple of apps, my home and power buttons now aren't responding.
Has this happened to anyone else before? I've read that a back up and restore might help.
Any advice would be greatly appreciated.
Thanks, ClairePlace the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too -
Ipod Nano - Power Button Stuck
I had a nano that I dropped and paid to replace at the Genius Bar in September of 2012. Just a couple of weeks ago, the power button became stuck all of a sudden (literally, worked fine using it on the commute to work in the morning, became stuck on the commute home), making it exteremly difficult to press and function.
I just contacted AppleCare in which they said it was out of warranty because it was purchased in October 2005 (I think that was my 1st gen Nano!). I paid to have my nano replaced way under a year ago and they said it's because the warranty doesn't roll over?? Is this true? So if that's the case, if all of a sudden it stopped working a day after I get a replacement, I' would be out of luck too??
Please help! I don't want to put more money into this.I had this question too and I brought my nano to the genius bar (remember to make reservation before going), they let me pay HK$488 and issued me a brand new 6th, exactly the same model of the one I had! Super satisfied, you should have a try too.
My previously replaced 6th nano the power button stuck, I think because I made use of the fast key of skipping the songs (pressing the home button twice while playing songs), the button I guess suggested to be over-used.
Good luck -
My iphone screen has turned black, phone is still on as screen shots can be taken. When home button and power button are held - no apple icon will appear. Please help??
If this iPhone has had the screen replaced previously, possibly LCD Display connector has simply come loose from the Logic Board. Possibly the LCD Display is faulty and the front screen assembly needs to be replaced. If you have Warranty or AppleCare make Genius reservation or set up service and take or send to Apple. This is handled by Apple with Replacement iPhone 4S.
-
I currently have an iPhone 4 which I have had for around 7 months and the power button is stuck. I would just like to know what apple will do if I take it to an apple store?
Same thing happened to my iphone after it fell out of the poorly designed Griffin Elan leather holster case. Power button stuck on, phone cycling until dead. I read about the disassembly to fix, but figured that was out of my comfort zone.
I fixed it though, sort of.
I took an old Bic disposable razor and using a pair of wire cutters, I trimmed away the blade protector , leaving the plastic base and blade protruding. I broke off the handle and had a makeshift thin razorknife-like tool.
I inserted the corner of the thin razor blade between the metal case and the plastic button and pried the button up. Took two tries and the button was no longer stuck in the down position. The phone works now!
Of course, if I try to push the button back down it will probably stick, but I didn't usually power it off very often anyway.
I might try to grind the case with a dremel tool or something like that to keep if from sticking, but haven't tried that yet.
Hope this helps someone else. -
IPhone 4S power button stuck in down position
I just got 3 iPhone 4S's for Christmas for my kids through Sprint. I am having a problem with one of the Power buttons stuck in the down position. Sprint won't swap out the phone because they say I "ordered" them more than 14 days ago, even though I activated them on Dec. 25th. So, now I have to drive 2 hrs to an Apple Store. WHY????? Why can't sprint swap out this phone? Why do I have to drive two hours to get to an Apple store so they can swap it out??
Apple will cross ship you a replacement. They will require placing a hold on your credit card, but you will not be charged so long as you return the old one.
As for the drive, I guess it's all a matter of perspective. I make the drive from West of Cleveland, OH to near Pitsburgh every few months to take the wife to the outlet malls where there's no sales tax on clothing. I don't know whether it's a good thing or a bad thing that my wife usually manages to buy enough that I save enough in sales taxes to cover the cost of gas back and forth... -
My iPod nano won't turn on power button stuck down.is this servicable?
My iPod nano won't turn on power button stuck down.is this serviceable?This is the 6th gen model
Hi Whackers!
Here is a link that will help you get support for this product:
Contact Apple for support and service
http://support.apple.com/kb/he57
Thanks for coming to the Apple Support Communities!
Cheers,
Braden
Maybe you are looking for
-
CD-DVD Drive won't read CD-ROM just burned -- readable on other computers
Computer: Satellite C655D-S5048 OS: Windows 7 64-bit Software used for burning: Roxio Burn process goes smoothly -- options set for creation of read-only disk. Disks are 700 Mb, 52x of good quality. After having been burned, when reinsterted in the d
-
Best Image File Type & Size for Photo Books?
When you select your photos to be included in a Photo Book submission, is there a required file type and maximum size. Most of my images are presently Photoshop .psd files and TIFF files of substantial size -- around 2 to 4MB, that I will have to imp
-
Hi, is there any way to view contacts in address book that HAVEN'T been put into a group? Thanks
-
I have just installed NI DIAdem 9.1 on Windows XP and am struggling with the inadequate documentation. I have a local MySQL database server running, and have installed the MySQL ODBC driver. I have defined an ODBC data source to provide access to my
-
Configuring transport for calendar
Hello together! I have problems with my calender in portal. Error message occurred: "No transport has been configured for calendar". Can anybody give me a hint to solve the problem? I am looking forward for your comments! Thanks a lot! Dominik