"Glass" Effect Lettering Created In Photoshop Does Not Appear Correctly.

I have made some "glass" effect transparent titles in Photoshop by putting a normal title over a transparent background, adding an inner glow and bevel and then reducing the Fill Opacity to zero.
This is how it should look:-
However, when I import it into FCE/FCP and superimpose it over video the title usually looks solid black - as it did originally before I reduced the Fill Opacity.
I have tried every combination of Composite mode I can find in FCE/FCP to no avail.
Is it possible to show it the way it is intended and if so, can anyone suggest where I am going wrong?
Ian.

Hi(Bonour)!
Start with a transparent background in photoshop. Compose your title document (yopu can put a reference layer at bottom of the stack to see how title will appears on your image clip- if so, pay attention to make this backgroud inactive upon exporting) and save in PNG format (this format save the alpha channel-transparency- with your graphic elements).
Import in FCE, and compose your title over your video clip.
Use normal composite mode.
You can also use Boris title or livetype to achieve the same result.
Michel Boissonneault

Similar Messages

Navigation Drop Down Menu Does Not Appear Correctly with Internet Explorer.

Website was designed with Dreamweaver CS5 on a Mac. The navigation drop down menu does not appear correctly with Internet Explorer. When you mouse over a navigation option that has a drop-down menu, the drop-down portion appears on top of the first level. Hope someone can help me out.Thanks!
http://www.catchaghosttoursofkansas.com

Hi,
and you should then iron out this minor inaccuracy, which I found in your source code, for example here:
<div align="center"><a class="MenuBarItemSubmenu" href="hays.html">HAYS</a>
        <ul>
          <li><a href="hayswalkingtour.html">Walking Tour</a> </li>
          <li><a href="forthays.html">Fort Hays</a></li>
        </ul>
All your "first" entries have to show a '#", like this:
      <div align="center"><a class="MenuBarItemSubmenu" href="#">HAYS</a>
        <ul>
          <li><a href="hayswalkingtour.html">Walking Tour</a> </li>
          <li><a href="forthays.html">Fort Hays</a></li>
        </ul>
      </div>
after that you can link to the individual subgroups. See here e.g. (screenshots from my German DW):
Hans-G.

Event created on iPhone does not appear in iCal

When I create an event on my phone and sync, it does not appear in iCal. Events created on my laptop sync without issue. Contacts sync both ways, but calendar events do not go from the phone to the computer. I am not using MobileMe to sync, simply using the USB cable.
I have tried the following to resolve my issues:
* Make sure iTunes and iPhone are up to date
* Make sure all calendars are set to sync with iTunes
* Try different USB ports on the laptop
* Restart phone and computer
* Reset sync history in iSync and re-sync
* Follow directions in this support article: http://support.apple.com/kb/TS1627 to do a full reset of sync history and re-sync
Yet after trying all of those solutions, I still cannot sync events created on my phone to my laptop. Does anyone out there know of anything else I can try that might work?
Thank you,
Cameron

After a trip to the genius bar, I found how to solve this problem, at least for me:
0) Plug in iPhone
1) Start iCal
2) Export all calendars (File -> Export)
3) Quit iCal
4) Delete all calendars from ~/Library/Calendars
5) Start iCal
6) Import all exported calendars
7) Start iTunes, configure syncing to overwrite calendars on phone
8) Sync iPhone

Programmatically created calendar view does not appear on view selector menu

Hi!
I'm using the following code to create a calendar view for a list:
using (var site = new SPSite("http://localhost"))
var viewFields = new System.Collections.Specialized.StringCollection { dateStartFieldName, dateEndFieldName, titleFieldName };
var query = string.Format("<Where><DateRangesOverlap><FieldRef Name='{0}' /><FieldRef Name='{1}' /><Value Type='DateTime'><Month /></Value></DateRangesOverlap></Where>", dateStartFieldName, dateEndFieldName);
var viewData = string.Format("<FieldRef Name='{0}' Type='CalendarMonthTitle' /><FieldRef Name='{0}' Type='CalendarWeekTitle' /><FieldRef Name='' Type='CalendarWeekLocation' /><FieldRef Name='{0}' Type='CalendarDayTitle' /><FieldRef Name='' Type='CalendarDayLocation' />", titleFieldName);
var list = site.RootWeb.Lists["ESM Leaves"];
var newView = list.Views.Add("Calendar11", viewFields, query, 0, true, false, SPViewCollection.SPViewType.Calendar, false);
newView.ViewData = viewData;
newView.MobileView = true;
newView.Update();
list.Update();
My problem is that even though the view is created, it does not appear in the View links just above my list. It only appears in the drop down menu of views in the ribbon. On the contrary, if I create the view using the browser user interface (not programmatically),
the view appears in both places.
Do you have any idea why this might be happening?
Dimitris Papadimitriou, Software Development Professional

Hi papadi,
I can reproduce the issue that creating calendar view using programming method, the view isn’t shown in view selector menu, and this only happens to calendar view, html view or other views are shown in the menu.
After editing the web part, disable the selector menu, then re-enable the selector menu again, I can see the calendar view shown in the view selector menu, create a new calendar view using programming, the calendar view shows as expected.
This seems indicate there is some issue in the view selector menu display, I would suggest you to first disable the view selector menu through edit the web part properties, then create the calendar view.
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support

SMS list does not appear correctly.

The SMS list does not appear draft messages correctly for one of my enterprise user. But the draft messages are appearing correctly when viewed from the master message list which used for all messages.
I have wiped out the handheld & restored the backup, but the problematic draft messages has gone missing now & everything works fine.
If any body has similar issues or have found out some alternates are most welcome to post the resolution.

Hi,
The same issue has reoccurred today for the same device and the scroll gets locked exactly at a old message date i.e. 6th-Aug-11 & does not go up to see the latest messages. Normally it happens while deleting a message & gets stuck.
I have backed up the SMS section via BB Desktop software & restored back. This has resolved the issue as of now, but certainly looking for a permanent solution & the root cause.

Blade 6000 ILOM web ui does not appear correctly in firefox 7

Cannot see correctly ILOM web ui nor in firefox 7 (Win or Linux) nor in IE9.
In other words any control (f.e., Remote Power Control) and any info (f.e., System monitoring/Indicators) does not appear in the frames.
Firefox 3.6 works fine.
I've upgraded ILOM to ILOM-3_0_12_11_a-Sun_Blade_6000 ant got the same result.
May be anybody have already faced with the issue?

if you have ILOM 3.0 then consider these ;
TABLE: Supported Web Browsers
Operating System Web Browser
Oracle Solaris (9 and 10) • Mozilla 1.4 and 1.7
• Firefox 1.x and later
Linux (Red Hat, SuSE, Ubuntu, Oracle) • Mozilla 1.x and later
• Firefox 1.x and later
• Opera 6.x and later
Microsoft Windows (98, 2000, XP, Vista) • Internet Explorer 5.5, 6.x, and 7.x
• Mozilla 1.x and later
• Firefox 1.x and later
• Opera 6.x and later
Macintosh (OSX v10.1 and above) • Internet Explorer 5.2
• Mozilla 1.x and later
• Firefox 1.x and
and remember to check JRE , to run the Oracle ILOM Remote Console, you must
have the Java 1.5 Runtime Environment (JRE 1.5) or later version of the JRE software
installed on your local client.

Horizontal Spry Submenu does not appear correctly in IE

I am building a site in Dreamweaver CS5 and my spry submenus do not appear correctly in IE.   I work on a mac, but have been checking my work on a pc.   I have tried looking through other posts and have made some corrections (I at least got the submenus to appear vertically instead of laterallly in IE) but still have two problems:
   * The submenus are shifted to the right rather than aligning under the menu headings
   * One one menu (Attorneys) the submenus appear above, rather than below, the menu heading
Here is the website and I am really hoping someone can help! I've spent several hours trying to figure this out with no luck.
http://webdesign.protas.org/olg/English/olg%20eng.html

1. Especially IE takes offence to the DOCTYPE declaration not being on the first line
2. There is no end tag for the HEAD section
3. Your use of the Library Item for the menubar is not correct
Please have a look here http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwebdesign.protas.org%2Folg%2FEngl ish%2Folg%2520eng.html
Gramps

Change Menu in Photoshop does not update correctly in Encore CS4

Hi there,
I've read some threads that there seems to be a problem with saving/updating psd menus in encore that have been changed/edited in photoshop. I heard three saves was the magic number.
Well, I've saved over a dozen times, and I can't seem to get the change to come through to encore. to make it even more confusing, some of the changes leak through, but not all of them.
I have this Chapter's menu and I wanted to edit the highlight of a selected chapter - and so I changed it to a red bar with a outer glow in fx in PS.
This is what it looks like in PS.
I go into encore - saved probably a dozen times, (and yes, with small changes like showing/hiding layers to actually save) and waited for over an hour to come through, and when I go to Encore it did ask me if I wanted to overwrite the file from PS - and clicked yes.
Well, I go under the preview in encore to preview the DVD and this is what it looks like:
That shows up blue now but with no Outer glow on it. The weird thing is that one of the chapters (2nd to right one in the bottom) - that one has turned red, but doesn't show the glow either - just shows up like the one that shows blue on top except that it's red.
What am I doing wrong?

Stan,
I do not do a Save As - I always hit ctrl + S to save it.
If I do it incorrectly, then how else should I be doing it?
Giorgio,
"I just would add that sometimes I see some little "discrepancies" between the files created in Photoshop and what I see in Encore, but this is just an Encore PREVIEW matter, nothing else."
I thought of that too and so I built to a DVD folder on my computer and it was the same way there - as far as the color of the highlights go.
What I did was double click on the layer thumbnail to bring up the 'Pick a solid color' box, and then the sliders on the right, I moved them all the way to the top, and then click on the top right hand corner, but not all the way in the corner, just in the general top right hand side. I wasn't so particular that I had each color code exactly the same because it was close enough for me to just have it up there in that side - you can't really tell the difference in the colors at that point anyway - at least not without holding them side by side.
Last night I double checked that everything was saved (Ctrl S) and then I shut everything down, including the computer, and this morning when I fired it up again - opened EN first with the project, right click 'edit menu in PS' and now in PS I see that it still has all those bars red (but don't show that way in the Preview in EN) but all the outer glow fx were disabled....
Now I'm still not quite sure what was meant by this: "Have the highlights you created the same color?
If not, you had to use (=1) (=2) (=3) keys before the layer name to display different colors in Photoshop application."
I understand you to mean the filename "(=1) highlight" numbers would have to be changed, right? Why is that? How come I can't just go into PS and set the color as I want - even if they are all different?
Ok, I just went into PS and went through all the highlights and copy&paste the color # code to make sure they were all exactly the same on each one, then I also went into the glow fx on each one and did a copy&paste there (slightly diff color then the thumbnail one) to make sure they were all the same as well.
Save 3 times - go into EN and no warning message, but a blink which I took meant it updated, and then I went into Preview, and there you have it - they were all red!
BUT there was no glow to them.
I went back into PS and on each one, all the fx were disabled.
Why does it do that?
How can I get fx to carry through into Encore?
Please excuse my ignorance, I'm expecting to learn a lot!
Thanks everyone!

PDF document apparently not created, because it does not appear

I am temporarily booting up from a cloned backup of my hard drive located on an external hard drive, because my G4 Powerbook (containing my actual hard drive) is being repaired. I use Acrobat Standard 7.0, on a Tiger operating system (Mac OS X v. 10.4.11).
Normally, I create a PDF version of a Word document by simply printing it to PDF -- selecting “Adobe PDF 7.0” in the Print dialogue. Briefly after hitting “print,” a PDF document named “TemporaryCustom_PS_File” appears on the desktop. Now, however, no PDF document of any sort appears -- on the desktop or anywhere else I can detect. (A smart search reveals no relevant document has been newly created or modified, or appropriately named, etc.)
I am hopeful this problem will not continue when and if I am again able to use my hard drive. But, in the meantime, how can I rectify this?

PS: Perhaps I should add that I am printing from a CLASSIC version of Word, so the print dialogue box does not offer such things as “PDF options,” “Save as PDF,” or even “Copies & Pages.” It is very basic -- just identifies the printer as “Adobe PDF 7.0” and lets me choose a page range. (Only “destinations” available are “Printer” and “File.”)

Website created in FrontPage does not display correctly in Safari

Using StoreFront software (PC based only), we have created a website that performs beautifully in Explorer and Netscape on a PC. For some reason, not all pages open properly on a MAC. It is the left column that does not open properly on the dynamically generated pages. Does Safari have a problem with style sheets?
NH Barrie
G5 Mac OS X (10.3.9)

If you would provide the url of your page, it would be a lot easier to help. You might yourself want to check your page against the w3c standards to see how far off it is:
http://validator.w3.org/

Why "Lighting Effects.plugin" in FIlter folder does not appear in the Rendering menu?

Photoshop CS5 - I need to work with the "Lighting Effects.plugin".
The plug-in is correctly installed into Adobe Photoshop CS5.1>Plug-ins>Filters but it NOT APPEAR rolling down the RENDERING menu!!
How can I make it visible?
Thank you

That particular filter was not updated/upgraded to 64 bits, therefore you need to launch Photoshop as a 32-bit application.
http://help.adobe.com/en_US/photoshop/cs/using/WS82af097c4236e2eb70aae8412fa75dc285-8000.h tml
In 64-bit versions of Mac OS 10.5 and later, some older, optional plug-ins are available only if Photoshop is running in 32-bit mode:
In the Finder, choose Go > Applications.
Expand the Photoshop folder. Then right-click the Photoshop application icon, and choose Get Info.
In the General section of the Info window, select Open In 32-bit Mode.
Close the Info window, and restart Photoshop.
For more information, see 64-bit operating system benefits and limitations in Photoshop.
Wo Tai Lao Le
我太老了 No connection to Adobe.

PDF created in ArcView does not appear the same for all users

PDF documents created from ArcView 9.2 with the "warm front 2" symbol in it do not appear properly on some users computer displays when opened. I have a handful of users who when they view these specific PDF's the symbol appears as a series of 4's. We are using Acrobat Pro 7.0.9 and all systems are running Windows XP Pro. In the handful of users experiencing this problem we have both laptops and desktops.

Probably did not embed the fonts in the PDF. Change the settings file to print (or press) and try again.

Adobe Create pdf icon does not appear in Firefox 36.0.1

I am using Windows 10 TP and have used Adobe Acrobat XI with Firefox for months now and have been able to click on the Adobe Icon on the FIrefox toolbar to convert web pages into an Acrobat file. In the last couple of weeks this icon has disappered but the following items still exist:-
1. Under Options/Applications Portable Document Format (PDF) is still set to Use Adobe Acrobat (default)
2. In the list of Add-ons I still have an entry Adobe Acrobat 11.0.10.32. This is the Adobe PDF Plug-in for Firefoc and Netscape.
3. I have uninstalled ALL add-ons ansd re-installed but that does not resolve the problem
4. I have uninstalled Firefox and re-installed it again but that does not resolve the problem
Can you please offer any suggestions to resolve this problem?

I forgot one detail. This happened while I was having trouble seeing the mouse cursor (I use Apple's Magic Mouse). It had disappeared briefly. I had to drag the cursor out of the Firefox Window for it to reappear. I accidentally entered full screen view while the cursor was not visible.

Blog does not appear correctly in the browser window

I didn't finish my query to you when this screen flew off of my browser so I am resubmitting my information:
I have put up a blog at this temporary address:
http://www.historicalfictionbybobturpin.com/upload_test/blog.html
The blog in the Firefox browser is only about 1.5 inches in vertical height and virtually unreadable. The blog is actually a full page in the browser and it appears correctly in Internet Explorer, Safari, Google Chrome, and Opera browsers, but not in Firefox 5.0, Firefox 5.0.1, or Firefox Beta. I upgraded my browser from Firefox 5.0 to 5.0.1 to Beta hoping the newer versions of Firefox would display the blog correctly. I was able to check it on an older computer in Firefox 3.0 and it displays correctly. I have tried everything I could think of to make the page appear correctly in the browser, even to contacting the software manufacturer re this problem. After almost two weeks (we e-mailed back and forth re this matter), they finally concluded is a Firefox problem. I came to this conclusion before they did as everything works correctly in the above named browsers. The programmers wrote me that they did find that on some computers, changing the Character Encoding in the View menu corrected the situation, but not always. And it wouldn't be feasible for me to put a note on the blog, expecting viewers to change the character encoding on their computer in the hopes that they can read the blog. I hate to post something that doesn’t work correctly on the web but I have two additional blogs to create for customers, and I find that all the blogs appear incorrectly in Firefox but not in the other browsers. I had another problem some time back with Firefox and my programmer was able to fix it by adding code to the site page. Unfortunately he is no longer available and I don't know where else to turn to get this corrected. Do you have any ideas to help?
In answer to the the this happened box below: This happens EVERY TIME the blog page is viewed in Firefox but NEVER when viewed in any of the other browsers.

The HTML validator finds one problem that might be related:
http://validator.w3.org/check?uri=http://www.historicalfictionbybobturpin.com/upload_test/blog.html
''"Warning: Byte-Order Mark found in UTF-8 File. The Unicode Byte-Order Mark (BOM) in UTF-8 encoded files is known to cause problems for some text editors and older browsers. You may want to consider avoiding its use until it is better supported."''
I'm not sure if this is related or not, but it might be useful information for your programmers. I tested your link on my Linux computer, but I did not see any problem with the page using Firefox 5 or Firefox 6. (Perhaps the problem only affects Firefox on Windows computers.)

Atributes list to create target group does not appear

Hi experts,
In CRM Portal, It is not showing the page which I can choose Attributes list in order to create profile groups and target groups.
I'm looking for something similar as tcode: CRMD_MKTSEG in SAP GUI.
I have already assigned Marketing Manager/Assistant in my profile.
Does anybody could help me ?
regards,

Hi,
Assign Transaction category CRMD_MKTSEG to your user role for GUI as well as Portal(PCUI),
u'll see the Segment Builder tab in PCUI screen, u can create profile/sets and target groups.
Thanks,
Dipesh.

"Glass" Effect Lettering Created In Photoshop Does Not Appear Correctly.

Similar Messages

Maybe you are looking for