Glassfish password problem - can 'configure' but not 'admin'

Hi,
Using the release 1.10.179 with Glassfish Community 3.0.1 on Windows XP - I can deploy and configure my APEX listener, but once it's there I cannot get to the 'listenerAdmin', 'listenerStatus' screens - it doesn't accept the passwords that I created for the 'adminlistener' and 'managelistener' users.
Any ideas on how to get past this?

scott.wesley wrote:
I installed this successfully in Windows 7, just tonight.
I would suggest first double checking the PDF instructions for the configuration - I found it easy to miss a small step.
Double check your port numbers you're using, too. Mine defaulted to 4848 for the admin, but 8080 for listener admin.I don't think that it's a ports problem as 'wrong' ports result in getting a page not found error. I've also found that I'm having problems running APEX, seems to be on the wwv_flow.accept...
I'll have another look at the documentation!

Similar Messages

SIP Problem - Can make, but not receive calls

I two E-Series phones (E51 and E71). The E71 is configured to connect over my WLAN to my corportate phone system. this works perfectly for making and receiving internal and external calls, however, my E51 can only make calls. both phones have identical settings with regard to my phone system but i wonder if there is a known bug and more importantly a workaround? i have also tried to configure a spare E65 and this presents the same problem as the E51.
Any ideas? starting to get a headache over this....
Many thanks
Ben

I am sorry I didn't get back to you but I have been away for a while. I have discovered that when I turn the firewall off on my imac I can receive Facetime calls - turn it back on and I can't. Seems a little silly that Apple's own firewall blocks Facetime.
I wonder if anyone else has this problem. I am a little concerned about having to keep my firewall turned off.
Thank you very much for your help anyway.

TS3899 I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Can't FaceTime anymore? iPad states wifi connected and iPhone 4 states not connected? I have wireless in my home? Not sure what happened. Password works for iPad but not on phone?

iPhone won't connect to wifi. iPad is connected. Password working on iPad but not on phone. Can't upload software update of IOS 7.1 because phone not connecting to wifi?

Connect iPhone to computer and open iTunes. You will be prompted to update to iOS 7.0. Keep your phone connected until the update is finished.

TS3276 Anyone experiencing problems sending mail using TalkTalk - can receive but not send - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

Anyone experiencing problems sending mail using Apple Mail viaTalkTalk - can receive but not send - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

jag157 wrote:
"I managed to solve the problem. Under smtp settings (mail preferences/accounts/edit smtp) I set the outgoing port to 25 (as recommended by Talktalk), no authentication (set to none) and unchecked SSL. I found that until I set the port to 25 and authentication to none I was unable to uncheck SSL. One I had done this I was able to send from my main email and other email adddresses set up under my account."
Superb advice R&W! My email sending block using TalkTalk started 2 months ago using Snow Leopard, continued when I upgraded to 10.8.2, and has been persistent on my wife's new iPad (IOS 6.1). Implementing your wise words has fixed all that, and now enables me to call her on FaceTime — previously only she could call me. Thank you so much; this will save hours of further fruitless searching and phoning.
Please remember that your email is now insecure, if you wish to have a secure connection SSL must be on and port 25 should be avoided.

Can send but not retrieve emails using Thunderbird and Windows 8.1

Hi, I am not able to get Thunderbird to retrieve emails on a new laptop.
Last week I purchased a new laptop due to an imminent hard disk failure on my old laptop. I will call them "Old" and "New" laptops. (Old laptop is still working for the moment...)
The Old laptop is nearly 3 years old, and I have been using Thunderbird on it since new without any problems.
I have downloaded and installed Thunderbird on the New laptop, and can not get it to retrieve emails.
As the Old laptop is still working (at the moment), I am able to directly visually compare and check settings on both computers.
THE PROBLEM
Using Thunderbird on the New laptop, I am able to send emails, I can see all my old emails restored from the Old laptop using Mozbackup, but clicking Get Mail on the New laptop does not retrieve new
emails.
When I click Get Mail, the status message in the bottom left corner says "connected to .....<ISP>..." but does not actually get the emails. However, the Old laptop is still able to get emails as it always has.
My ISP is a large Australian telco that I have used for many years and I have not changed anything with my account. The ISP is POP3.
WHAT HAVE I TRIED
I deleted the email account created by restoring from Mozbackup, and attempted using the Thunderbird new account wizard, however Thunderbird did not recognise my ISP and would not create the account - even though it is working perfectly at the same time on the Old laptop.
All Firewalls I can find have been configured to allow Thunderbird, with the same configuration settings on both machines.
How do I know I can send but not Get emails from Thunderbird on the New laptop?
I have sent test emails to myself from the New laptop. Thunderbird sends successfully, I am able to preview the test emails via Mailwasher on the New laptop, and can read, reply, etc, to the emails if I log into my ISP webmail service. However I can NOT get Thunderbird to retrieve and download these emails on the New laptop. If I go to the Old laptop, Thunderbird works perfectly, retrieves and downloads all new emails, including these test emails.
I am now at the point where I do not know what else to try and would appreciate any suggestions.....
I have spent many hours over the last 3 days surfing the net, forums, Mozilla Support, etc, and tried everything suggested, without success. The only thing I have NOT tried is starting windows in Safe mode (as per some suggestions), as it is not a viable long term solution.
OTHER INFO
Computer Details;-
"Old" laptop;-
Windows 7 Home Premium - continuously updated with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed). Up to date.
MailwasherPro 2012 (subscription and licensed). Up to date.
Thunderbird 24.5.0 working perfectly. Up to date.
"New" laptop;-
Windows 8.1 - up to date with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed) - downloaded and installed. Up to date.
MailwasherPro 2012 (subscription and licensed) - downloaded and installed. Up to date.
Thunderbird 24.5.0 - downloaded and installed.
Note: I 'downloaded and installed' the Windows 8.1 version of these programs to avoid any potential compatibility problems restoring or copying from a Windows 7 backup version of the programs.
1) New laptop came with pre-installed with McAfee - which has been Uninstalled due to running Bitdefender (Windows searches for 'McAfee' return nothing found suggesting the Uninstall was successful).
2) Thunderbird has been added to both Bitdefender and Windows 8.1 firewalls on the New laptop.
3) Bitdefender and Windows security settings are identical on both laptops - as near as I can determine, I may be missing something - but have checked all settings 3 times by doing a side-by-side visual comparison.
4) Thunderbird settings are also identical and I am using the same email address and ISP that I have been using for many years.
5) I migrated Thunderbird settings, accounts and emails from the Old laptop to the New laptop using Mozbackup, then visually checked and compared all settings in Thunderbird between the two machines.
6) For info, I have used Mailwasher for many years as a simple way to preview and wash mail before running email programs such as Thunderbird - might be overkill, but I have also never had a virus or malware problem, so will keep doing this.
7) I have Uninstalled and re-installed Thunderbird on the New laptop twice, and done the same with Bitdefender once.
8) Any config changes I try on the New laptop, I either restart Thunderbird and / or restart the New laptop, or both.
9) I have not created a Windows 8.1 account and am not using SkyDrive.
10) Only other software I have installed on the New laptop is Google Chrome, Office Home 2013 and iTunes - all are working.
Thanks in advance....

Well there is not much left. If telnet works then the path is clear and there is no hardware firewall blocking ports.
All that is left is software, so try windows safe mode with networking. A very handy way to eliminate software. it also actually disables most anti virus resident features and is preferred here because anti virus/security programs do not always disable or turn off when they say they have.
You might also try the McAfee removal tool. https://community.mcafee.com/thread/52788 I notice the rep said yes to both, they did not say not required.
Finally you could try creating a new profile, and see if it works just to exclude corruption of your existing profile. ( I doubt it but I am at the anything goes point)
Just as an aside, I have never had an email borne nasty and I for many years never even had an email virus scanner. So yes I think your a bit over cautious with mailwasher, if that is what your using it for. Thunderbird does not support scripting languages or flash, or most plugins in the email sandbox. The result is getting a virus from a mail in Thunderbird is really only possible, for all practical purposes, if you open that password protected zip from the young Russian woman and that is what the anti virus should be blocking anyway when the temp file is written.

I can receive but not send emails with my skynet account - what am I doing wrong ?

I can receive but not send emails with my skynet account - what am I doing wrong ?
I have no problems with my Yahoo account but I can not send emails with my skynet account.
Actually in iPhone :
Outgoing Mail Server > SMTP "relay.skynet.be"
Primary server > Not Configured > Off
Thank you ...

When you set them up, did you set up both the incoming and outgoing email servers separately, and did you enter the correct SMTP server name, and enter your userid and password even though it says "optional"?
Something else to try, if you haven't, is delete the accounts, connect the iPhone to iTunes, on the Info tab check the box to sync mail server settings, then sync. This should duplicate the settings from your computer to your iPhone.

Windows Mail can receive but not send until exiting application

Hi, and thanks for taking time to read this as I’m in need of your help.
I have a Toshiba P200, Vista Home Premium, Tiscali as my ISP, Norton Internet Security for AV and firewall, and am accessing my broadband via Ethernet to a Belkin ADSL router (and occasionally a Siemens router) and I’m experiencing some strange happenings with Windows Mail.
In short I can receive mail with no problems, but when I send the mail it stays in the outbox despite the Send Immediate option being checked or pressing the Send/Receive button. When I exit Windows Mail the mail is sent straight away, and is in the Sent Mail folder when I restart Windows Mail.
So why do I think there’s a problem with the laptop. Well, I’m fortunate enough to have a friend who has an non-Toshiba laptop, where all of the above can be replicated. Guess what, Windows Mail sends the mail exactly as it should (on my Tiscali account and on my network, through my router and ISP etc.), so I conclude that the only difference is that my laptop is a P200.
I have called Tiscali who confirmed that all my Mail settings were OK, POP, SMTP etc, which I’d expect (as they work on my friend’s laptop), and they advised I contact Microsoft, which I did, and since the P200 has Vista pre-installed they say I have to contact Toshiba, and here I am.
My P200 has been restored to factory settings, and I have tried to get this working without Norton IS, and no firewalls (Vista and router), but no luck.
Any ideas would be much appreciated and if I find out by other means, I’ll post back with outcome. If the answer is already out there, I apologise for being too dumb to locate it and beg your patience.
Many thanks.

Hi
It is typical for support people. Every of them try to send the customers away and the reason should be by them. In my opinion Microsofts reaction is strange for me. They have designed operating system and they should be responsible for the functionality.
I have Satellite A200 and Satellite P200D and I use Windows Mail on both of them successfully. My notebook is connected to WLAN router and router directly to the phone line. To be honest I have configured Windows Mail like you and all job were done in few minutes.
It is not easy to say where the problem can be but I believe there is some problem with some settings on your notebook. Some of them block it somehow. To compare your, with friends notebook is also not the best because he can have completely different OS settings (antivir application, firewall settings).
Try to disable all features who can block Windows hotmail to see if there is some difference.

E71 Imap, can send but not receive

HI all
I received my E71 about a week ago and having major problems configuring it with my work email.
Its an IMAP mail. I can send fine but on most occasions cannot receive. Occasionally it downloads some mails but only twice in the last week. I think this shows the settings are correct.
Have tried to sign up with Nokia mail but get the following error message:
'Unable to connect with the information provided. Please try again.'
My colleagues in the UK use Blackberrys fine and have spoken with IT and they cannot think of any reason why this is happening. I have deleted the mailbox and set it up again many times but still can send but not receive...
Very grateful for any advice as really happy with the phone other than this which is the main reason why I bought it.
Shane

Hi Anne,
Is this IMAP or POP account?
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.

Using osx 10.7.5 can send but not receive emails. Mail server support rep tried everything

Using iMac with OSX 10.7.5. Can send but not receive emails. No problem with internet account. Server rep tried everything and suggested perhaps a corrupted file in the op syst. Any ideas?

You may have a corrupt preference. Mail - Preferences - Accounts - click the offending account and re-enter all prefereneces. Also you can use Apple's OS X Mail: Troubleshooting sending and receiving email messages located at:
http://support.apple.com/kb/ts3276

I can send but not receive email

Hello All. I know this is a highly posted topic but I cannot find a solution. Any help is greatly appreciated.
Basic Problem- I can send but not receive email.
My ISP is. Yahoo SBC Global
I have a 3rd party email provider: 1and1.com
I have set my preferences according to the specifications of 1and1.com
The error I get is this: The server error encountered was: The attempt to read data from the server "pop.1and.com" failed.
I have a Macbook Pro, running 10.4.9. My account with the 3rd party email provider is new and only has 1 or two emails in the account. I know this because I can log on via the internet and use their website to check the emails in the inbox. So the "email" address is working. I just can't get it to forward to my laptop.
I'm wondering if it has something to do with port 110 being blocked by my ISP. But I really don't think they are blocking that port. Due to the fact that my previous computer was a dell, and I used a similar 3rd party provider to email, the account used port 110 and things worked fine.
Thanks to all.

Ok. I've got it working.
All I did was delete my account information from the preferences. Before, I was editing it.
I entered a completely new POP account and it started working. I have a hard time believing that I entered information incorrectly prior to this because I checked it, rechecked it had a friend check it and it all looked OK. I was copy and pasting information anyway.
However, once I deleted and re- entered a brand new account, it worked fine.
Ernie, thanks for replying to my emails! I appreciate it.
-Fraky

I can't send emails via mail. I can receive but not send. I have set up gmail on mail. Any ideas?

I can't send emails via mail. I can receive but not send. I have set up gmail on mail. Any ideas? No problems with the set up previously to this.

Go to Mail Preferences- Accounts and confirm you are providing Gmail what they require to send and receive mail. And DON'T specify Secure Socket Layer. Some mail accts don't like SSL
Good Luck to you.

SPA112 - Can receive but not make calls

I have just setup an SPA112 at home behind a NAT router and have configured it to a state where I can receive but not make calls.
It registers fine and remains registered.
The Line 1 Status indicates a State of "invalid" and a Tone of "reorder" when the call fails.
I believe I have fiddled with the dial plan sufficient to ensure that the number is not being rejected based on it. My current dial plan is as follows:
     (*xx|000S0|0[2-9][69]xxxxxxxS0|[69]xxxxxxxS0|04xxxxxxxxS0|xxxxxxxxxxxx.)
I have tried with and without an outbound proxy.
I have attempted to debug the issue, enabling full DEBUG level logging and setting "SIP debug option" to "full", but all I get in the log when making a failed call is the following:
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 18 and str G.729/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 8 and str PCMA/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 0 and str PCMU/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 2 and str G.726/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 100 and str NSE/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 112 and str encaprtp/8000 chan 0
     Jul 23 21:35:29 SPA112 daemon.notice msgswitchd[310]:   MSGSWD RTCP Reqt len 12 Data 2,17,7304,0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.268000]
     Jul 23 21:35:29 SPA112 kern.warning [17339229.268000] #### RTP STOP Flag set in this channel break ####
     Jul 23 21:35:29 SPA112 kern.warning [17339229.272000] ###### sock_sendmsg return 172
I have been unable to find any information about these warnings on th net.
I can successfully make calls with soft phones configured with similar settings behind the same router.
What am I missing?
Any suggestions appreciated, thanks.

Thanks for the post.
To clarify, I have been testing the connection by attempting calls to and from my mobile phone. If I use my mobile to call the number linked to the VOIP account that the SPA112 connects to, the call is received fine and the call works perfectly; I can hear voice at both ends fine.
If I attempt to call the mobile from the phone behind the SPA112 I immediately get a reorder tone as soon as the number is dialed by the SPA112 (i.e. immediately if it matches a number in the dial plan followed by S0 or after the short wait period otherwise etc.)
On the other hand, if I use a softphone (I've tried MicroSIP and Blink) I can place calls to the same mobile through the same VOIP account from the same LAN behind the same NAT as the SPA112, and the calls are received and bidirectional voice comms works just fine.
I'm not sure if I can make calls internal to my LAN with this setup... I only have the one VOIP account, and have no SIP server on the LAN (if that's the right terminology, I'm new to this).
Unfortunately I'm not sure what you're refering to when you talk about ACL and COR. The topology is very straight forward: the SPA112 (along with a couple of PCs) on a LAN behind a NAT router with an internet connection on the other side. The SPA112 is configured as a DMZ, though I don't believed this had any impact for better or worse. In no test for either SPA112 or softphone have I forwarded any ports or changed any router configuration at all (with the exception of the DMZ).
So the question is why the softphone can place calls fine, but the SPA112 can only receive calls. The dial plan is an obvious answer, but I'm fairly certain I've ruled this out.
If someone can tell me how to get more detailed logging out of the SPA112 that would be very useful as well.

Password works for login but not for the Adobe CC Desktop application

Password works for login but not for the Adobe CC Desktop application

Please refer to http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
ou can try deleting OPM.DB from steps below and try again.
Mac OS: You can locate the OPM.db file in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion. - http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html
Windows: You can locate the OPM.db file in the :\Users\\AppData\Local\Adobe\OOBE folder. To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7. -http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-ex tensions.html
3) update to the latest version of the Creative Cloud app.
Also we would like few more details:
When has this issue started occurring, was this after installation of any specific adobe product.
On which platform are you seeing this.
Also we would like to know if after above steps this issue occurs ever again in future.
You can refer to http://forums.adobe.com/thread/1239510
Regards,
Rajshree

Node display off , Central data cache configured but not active

Hi
We get an error "Node display off , Central data cache configured but not active" in Central system while trying to display the monitored the abap instance of system.We just completed the CCMS configuration.
we are getting this error in RZ20 (central system)
Agent regristration is complete in monitored system and it is running fine.connection from central to monitored (abap instance) system is also ok.Please help asap.
Operating System --AIX
Sap version--ECC 6
Database-db2
Regards
Shashi

Hi,
central data cache to improve the performance of the Alert Monitor when creating the alert monitoring trees.
Check [This link|http://help.sap.com/saphelp_sm32/helpdata/en/de/13622d770b5e4f8398fc536b690e93/content.htm]
And [This link|http://help.sap.com/saphelp_sm32/helpdata/en/10/75ea3b6d73e807e10000000a11402f/content.htm]
Hope this solves your problem.
Feel free to revert back.
--Ragu

Glassfish password problem - can 'configure' but not 'admin'

Similar Messages

Maybe you are looking for