GLC-EX-SMD for 3750X-48T

Hi,
The gigbit SFP compatibility guide shows GLC-EX-SMD (CPN 10-2624-01 or later only) works with 3750X as shown in the following screenshot. How could I know if the GLC-EX-SMD is CPN 10-2624-01 or later?
How could we identify it when ordering it?
Thanks.

Leo, thank you for the detailed explanation. It is very clear and I will know how to exam the SFPs at hands. Totally answered my questions.
But how can I gurantee that the new ones I am ordering having a Cisco Part Number 10-2624-01 or later? In CCW, it doesn't showing CPN. Does that mean I need to do a RMA if the part number is not suitable? I just think it will be helpful if Cisco can provide the CPN number in CCW if it matters for compatibility reason.
Anybody has this experience this and got a solution?
Thank you insharie for inputs as well.
Thanks.

Similar Messages

How can i connect between WS−G5484 1000BASE−SX and GLC-LH-SMD ?

Dear experts,
My customer has 6509 A-side and B-side core switches and need to migrate only 6509 B-side to Nexus.
I have some question below.
1. Customer's 6509A-side has multiple WS−G5484 1000BASE−SX and WS−G5486 1000BASE−LX links and it is connected to 6509B-side.
But customer bought only GLC-LH-SMD for Nexus migration of 6509B-side.
I understood BLC-LH-SMD doesn't support SX type, so I am worndering how i can connect between 2 different module ?
Or should i have GLC-SX-MMD for WS−G5484 1000BASE−SX links ?
2. Current Rack has LC type patch pannel from B-side to Rack A side.
But new Nexus A-side rack is located at different row and between these rack, there is only sc-type patch pannel.
So If i want to connect from LC-type to Sc-type patch pannel, how can i connect ? do i have to use SC-LC converter ?
3. Old 6509 links use many MMF cable, and new Nexus use SMF.
Between same LX/LH links, if a side use MMF and another side use SMF, how can i connect each other ?
Again new Nexus A-side rack is located at different row and between these rack, there is only sc-type patch pannel.
Please let me know in detail, Thanks in advance, I really appreciate for your help.
Jason.

Hi Leo,
Thanks of your reply.
Dear Experts,
I seek your expert's advice for another question urgently.
Please make you time and share your experiecce.
Thanks.
Jason

SFP GLC-EX-SMD dont work in C3KX-NM-1G Module on switch WS-3560X-48T

Hi
We insert a SFP GLC-EX-SMD in a Module C3KX-NM-1G, in switch ws-3560X-48T, but appear a message " dont supported" and the port remains in error-disable. we probe in the four port of module C3KX-NM-1G.
In paper from webpage of Cisco, say that is supported this sfp GLC-EX-SMD, but we have to use other IOS 12.2.58.SE, but this ios not exist for these switch.
The switch have ios 12.2.55.SE5. we need this SFP for a distance over ten kilometer.
Link when appear data from switch 3560X, sfp and nm.
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html
My question is. is supported or need extra configuration for that SFP GLC-EX-SMD work in a Module C3KX-NM-1G, in switch ws-3560X-48T?
Regards

Same thing. Upgrade the switch to 15.0(2)SE4.
According to the Release Notes, this SFP is supported on 12.2(58)SE2 but I am no idi0t and I won't recommend anyone using the entire 12.2(58)SE because there are more bugs in this train than the Amazon.

IOS recommendation for 3750X

Hi,
Currently I have a 3750X IOS version 15.02SE and I have run into a bug which causes the switch to reboot when the CPU utilization goes too high. This was because of logging which I had configured on the access lists.
Pretty soon I will need to upgrade the IOS on this switch to resolve this issue but I am not sure which IOS revision is stable, they all seem to have problems.
Any suggestions?

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
If you don't require 15.x features, 12.2(55)SE7..9 seem pretty stable/solid.

10Gb module uplink for 3750x switch issues

Hi All,
We build a network consists of 3 x 48 ports 3750X switches and this network is uplink to the Core with 10GB uplink.
We bought 3 x 48 port 3750x with 10GB modules plus enough10GB SFPs.
The problem is for the 10GB module , we can only have 2 x 10GB SFP connections or 4 x 1GB sfp uplinks.
How do we get around with the 3rd switch which need an extra 10GB uplink to the core ?
we do not want to buy another 3750x switch and stack to the third switch to give it more 10GB ports.
Any solution is much appreciated.
Thanks
PLe

Hi,
Can u shar the BOM which includes 10Gig module part code and a proposed digram which u wanted to deploy.
Vivek

Regarding SMD --for Portal Monitoring

Hi,
Is there any advanced configuration for exclusive portal monitoring usin SMD??
Edited by: kris B on Mar 19, 2008 12:38 PM

>
kris B wrote:
> Hi,
>
> Is there any advanced configuration for exclusive portal monitoring usin SMD??
>
> Edited by: kris B on Mar 19, 2008 12:38 PM
*Is there no such thing as dedicated portal monitoring, or nobody has worked on it??*

Device Package for 3750X Switches

Is there a Cisco Works Device Package for the new 3750X switches? Just bought
159 3750X-48PS-S switches to go with over 1000 3750G switches.

Thanks for the correction - I missed them when checking my earlier post.
3750X's ARE on both the LMS3.2 support list and the LMS4.0 / 4.01 support lists.
As you mentioned, applying the latest device support package will add them to the fold.

10G Module for 3750X Hotswappable??

Hey,
The Cisco documentation seems to be unclear on whether the 10G Module is hotswappable.
Not
Not sure what they are saying here.
"Although network modules are hot-swappable, we recommend installing a network module before powering the switch."
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/hardware/install/notes/net_mod_note.html#wp128946
What do you think?
Thanks, Pat

Hi,
I would agree with the comments above, first the modules are hotswappable, so they are designed to be able to be installed in a running system,however it is always preferable to not install modules in a running environment due to the risk of damaging the connectors.
Hope this helps.

Which sfp module add in Sg300-10 for connecting with 4503 switch over fiber?

Hello guys...
i need help in network design...
i have 2 cisco 4503 core switches with 48 port sfp that will use to connect at branches SG300-10 with 2 fiber that is single mode...
which module should use in Sg300-10 that will compatable with 4503 fiber module?
Please tell me if I will use the GLC-LH-SMD for WS-C4500 with fiber optic card WS-X4448-GB-SFP what type of SFP do we have to use for the small business switch SG300-10?
We could go for MGBLX1?
if i am ok please reply if not please provide the correct one solution for my design...!

Hello guys...
i need help in network design...
i have 2 cisco 4503 core switches with 48 port sfp that will use to connect at branches SG300-10 with 2 fiber that is single mode...
which module should use in Sg300-10 that will compatable with 4503 fiber module?
Please tell me if I will use the GLC-LH-SMD for WS-C4500 with fiber optic card WS-X4448-GB-SFP what type of SFP do we have to use for the small business switch SG300-10?
We could go for MGBLX1?
if i am ok please reply if not please provide the correct one solution for my design...!

3750X IOS

I'm upgrading a stacked 3750X - one and 3750X-24TS and the other a 3750X-48TS. I have downloaded the IOS files that correspond which each switch from the software download page (15.0.(2)SE7). The question I have is this: Are the two files exactly the same? They are the same size, but...
I don't have room to install both as separate, but won't have to worry about that if the files are the same for a 24TS as it is for a 48TS.

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Although Cisco's IOS image page lists all known models, often they all run the same physical image.
Besides being the same file size, are the files also named alike? Have you run a file comparison utility against them?

Proper SFP module for use

Hello,
I have a 15' optical handoff run from our ISP Flashwave to a 3845. We need an SFP capable of handling 1310nm single-mode transmission, but the GLC-EX-SMD has far more power than we'd need. I'm thinking a lower-powered SFP that still meets the transmission criteria would be less expensive and wouldn't require a 5dB attenuator.
I can't find another suitable option, can anyone suggest something different? And if not, perhaps a link to optical attenuators that would work well with the GLC-EX-SMD?
Thanks in advance!

You're welcome and thanks for the rating.
Actually Cisco refers to it both ways (1300 and 1310). Please see Table 4 in this document (and contrast with Table 1).
The GLC-LH-SM/D is very commonly used in just this application - metro Ethernet and service provider type of handoffs.
You may also want to take a look a the excellent document on this forum that Tom has put together. I keep it bookmarked.

Will GLC-EX-SDM supported on Cisco 3560?

Hi,
I am looking for optics which can work for longer distances like 30-40kms using 1310 wavelength and we did see that there is a module for it ( GLC-EX-SDM= ). But I would like to know if I can use it in Cisco 3560 ? Do let me know what all switches or routers these modules will work ?
Thanks,
ramanan

Below is a link to compatibility information for pluggable optics modules.
COMPATIBILITY INFORMATION
I am surprised the GLC-EX-SMD is not included on the 3560, but sometimes it is a matter of available resources to test compatibility or an operating issue that was found during testing that would prevent its use (heat, power, EMI, etc.).
You could use the 1000BASE-ZX module (1550um), either GLC-ZX-SM or SFP-GE-Z, as these are included in the compatibility documents.
You would have to get an answer from the 3560 Product Manager to find out if it is on the roadmap to be added to the system.

EWA reports for non abap systems

Hello gurus,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
>>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
In the SMD i can see just the abap systems for which the EWA are being already generated.
(i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
Do you have any idea, what i have done wrong?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system , EP SPS 19
Thank you very much for your points!!

Hello Jagan,
I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
Do you have any idea?
Thanks,
Best regards
Slavomir

Monitoring EP through SMD

Hi Friends,
We have installed Willy introscope and Configured SMD for EP system.
Working fine.. we can able to monitor the EP System, Java System through SMD.
Now, I need to know , what are the Theshold Values for
1. EP response time, CPU utilization, Memeory,threads,...etc
Please provide me document for above....
Regards,
Venkat

Everything is possible (customizing and/or developemt)...
But can you explain the business case to me? that would make it more easy to help you in your query...
ITS is older technology then EP and is dedicated to SAP Backend systems. EP is a generic platform for providing users a rolebased application and content platform. SAP EP is super in enabling access to SAP Applications (also ITS) and in addition can suply access to document via KM workflow via UWL and even to non SAP systems via different ways.
So again if you explain why in the world you would like to run EP via ITS then I can better help you...
Cheers,
Benjamin Houttuin

SMD Setup

Hello Guru's,
I have configured solution manager diagnostics on solution manager and installed SMD agent on satellite system (BW). While starting the agents on solution manager both systems are keep dumping with CALL_FUNCTION_NOT_FOUND & CALL_FUNCTION_REMOTE_ERROR errors. I couldnt able to figure out the problem.
Sequence of things done on Solution Manager
1. Change the Backend Client from 001 to 350
2. Deploy the SMD server package (SPS13).
3. Deployment of IS Agent (ISAGENTSMD71*.SCA)
4. Disable Maintenance Mode
5. Run SMD Upgrader
6. SMD Diagnostic Server Setup Wizard
7. Wily Enterprise Manager Installation
8. Install the SAP Management Modules
9. SMD Server Setup Wizard (Monitored System Setup)
10. Connect Managed System to SMD Server
11. SMSY Landscape Definition
Sequence of things done on Solution Manager
1.SMD AGENT Installation
2. Wily Introscope Agent Installation & Configure the Agent on BWS
3. Creating Auto Probe Connector
4. New JAVA VM Parameter on BWS for Auto Probe
5. Setup RFC Destinations to Managed System
ERROR 1:
Runtime Errors         CALL_FUNCTION_NOT_FOUND
Date and Time          12/17/2007 14:05:33
Short text
     Function module "SMD_DATA_LOADER100" not found.
What happened?
     The function module "SMD_DATA_LOADER100" is called,
     but cannot be found in the library.
     Error in the ABAP Application Program
     The current ABAP program "SAPLE2E_FUNC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
    The program "SAPLE2E_FUNC" contains the CALL FUNCTION statement.
    The name of the function module to be called is "SMD_DATA_LOADER100".
    No function module exists with the name "SMD_DATA_LOADER100".
    All function modules are listed in the Function Library (SE37).
    Possible reasons:
    a) Wrong name specified. Pay particular attention to
       upper/lower case and underscores ("_").
       or
    b) Transport error
    c) In the case of an enqueue/dequeue module,
       the lock object may not have been activated
       (ABAP/4 Dictionary).
How to correct the error
    Check the last transports to the SAP System.
    Is the program "SAPLE2E_FUNC" currently being changed?
    If an enqueue/dequeue module is involved, is the activation
    of the lock object missing in the ABAP/4 Dictionary?
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"CALL_FUNCTION_NOT_FOUND" " "
"SAPLE2E_FUNC" or "LE2E_FUNCU15"
"E2E_ME_RFC"
Function modules with names similar to "SMD_DATA_LOADER100":
SMD_DOWNLOAD
SMSY_DATA_XML_UPLOAD
SAP_OI_LOAD_MIME_DATA
S_AUTH_ROLE_DATA_LOAD
SCPR_TR_READ_DATA_LOBJ
SMD_USAGE_DATA
SMSY_DATA_XML_DOWNLOAD
SMSYAD_GET_DATA_FROM_LCR
SMSYAD_GET_DATA_FROM_LIS
SMSYAD_GET_AC_DATA_FROM_LCR
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
ERROR 2
Runtime Errors         CALL_FUNCTION_REMOTE_ERROR
Date and Time          12/12/2007 13:08:25
Short text
     "Function module "SMD_MDX_QUERY_EXECUTE" not found."
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLE2E_FUNC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     The error occurred during an RFC call to another system.
     In the target system, a short dump has been written as well.
     More detailed information on the error cause can be found there.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
    An error occurred when executing a REMOTE FUNCTION CALL.
    It was logged under the name "CALL_FUNCTION_NOT_FOUND"
    on the called page.
How to correct the error
    Please refer to the notes described in the
    short dump.
Please help me ASAP....................
Regards,
Ravi.

Hi!
Can you please help me with my issue?
I would like to setup SMD functionality.
I use SAP Solution Manager 4.0 with SP 13.
Here are the steps I already executed:
a) Installation of Wily Introscope Enterprise Server 7.1 (Location: Server of SOLMAN)
b) Deployment if file ISAGENTSMD71*.SCA (Location: Server of SOLMAN)
c) Setup steps on SOLMAN (conf. of at least 3 BTC processes, activation of BI source system, configuration of SLD according to tcode SPRO)
The errors I currently have:
1) Managed Systems Setup
I am about to set up the SMD for the monitored systems via http://server:50000/smd --> Diagnostics Setup --> Managed Systems --> Setup Wizard
Retrieval of selected solutions failed
The contents of at least one solution could not be retrieved from Solution Manager, or could not be uploaded to Diagnostics DB
Server->Server : java.lang.IllegalStateException: Warnings occured during Initial Upload : XML Template parsing generated warnings
Sat Jan 05 16:18:57 CET 2008 | storeHost(...):Host []
serverIP-Adressnull:Cannot insert/update the host
'[IHost: key=119954633765http://... (RC=2)
Do you still want to proceed to next step?
2) Acces to Root Cause Analysis --> Exceptions Error
Logon failed
What has happened?
Call of URL http://server:8000/SAP/BW/BEX terminated due to error in logon data.
Note
Logon performed in system <SID>.
Logon performed for client xxx and language EN.
What can I do?
Check the validity of your SSO ticket for this system.
If you do not yet have a user ID, contact your system administrator.
Error Code: ICF-LE-http-c:666-l:E-T:21-C:6-U:5-P:5-L:3
HTTP 401 - Unauthorized
My questions:
- Which additional settings for SDM setup (on SOLMAN and on the site of satellite systems) should be done?
- How can the errors (see above) be fixed?
- Should some additional SLD configurations be executed for the monitored systems?

GLC-EX-SMD for 3750X-48T

Similar Messages

Maybe you are looking for