Glide pad will not work after formatting g60-630ca

Can somebody help? my glide pad will not work after downgrading to xp.  The pad works itself for the mouse but then the scrolls on the side will not.  Please help...

You need the driver. It is a Synaptics Touchpad and you can use this driver:
Synaptics
Here is a link to the General XP Downgrade guide which has a link to all the drivers you need under "Moderate models:
XP Guide
The touchpad is hard because Windows does load a basic driver so it does not appear with an error in Device Manager, but the "real" driver is needed for advanced features like scrolling. Be sure you have all the needed Xp drivers, by the way.

Similar Messages

  • My Keyboard and touch-pad will work during post, but will not work after the os loads?

    I have a G60 and My Keyboard and touch-pad will work during post, but will not work after the os loads? Im running Windows 7, Anyone have any Ideas? I have already tried a hard reset, and safe mode???

    Try pressing the fn key and f2 to reach bios
    or
    try a usb mouse from your desktop
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • TS1702 Certain apps will not work after ios6 install.

    Certain apps will not work after ios6 update. Tiger Woods golf will run for about 5 seconds and stop. Have uninstalled/re-installed to no avail.

    My husband had the same problem with some apps after I updated his iPad 2 to iOS 5.  I checked the app store and there were updates for the apps to support the new software.  After updating, all apps work just fine.

  • HT1338 motion 4 will not work after yosemite upgrade

    motion 4 will not work after yosemite upgrade

    To be honest I do not use motion or any other compositing app so i do not miss it personally. However the new Motion is not that expensive, around $60 i think. Still, I understand your frustration.
    I am afraid the more the OS is updated the less compatible certain applications will become.
    Good Luck
    h

  • My iPod touch 4G will not work after I tried to Downgrade it from iOS 5 to iOS 6

    My iPod touch 4G will not work after I tried to Downgrade it from iOS 5 to iOS 6. The screen is black and it doesn't work.

    Downgrading the iOS is not supported by Apple.
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1414 wifi will not work after restore

    wifi will not work after restore

    Se emy response to your other post
    https://discussions.apple.com/thread/4862098?tstart=0

  • Telephone will not work after installing fax wizard

    I have  a new HP Office Pro 8615.   After I installed the fax wizard, my telephone quit receiving or sending calls.  The only incoming call will ring on the fax.  Can I uninstall the fax, as I do not need it?

    Hi , Welcome to the HP Forums! I see that your telephone will not work after installing fax wizard, for your HP Officejet Pro 8615. I am happy to help!  What is the Operating System you are using? Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos. If you do not need the fax, all you should have to do is unplug the phone cable from the back of the printer. That will prevent the printer from using the fax function.  If your phone continues not to work, I would consider contacting your phone provider.  Thank you for posting!  “Please click the Thumbs up icon below to thank me for responding.”

  • OMiC will not work after installing Leopard

    Does anyone know why OMiC will not work after upgrading to Leopard?
    After downloading Leopard, went into mail and tried to open a windat file, but a message came up stating OMiC disabled. I deleted that version, and tried to download OMiC 1.7.7 but it won't even get thru the download menu, it stops at "installation" gives me a choice of Tiger, or Panther, and it will not let me go any further. Has this happened to anyone else???

    I am not sure any of the solutions for these files have been made Leopard compatible -- I saw another post about this not long ago. See:
    http://discussions.apple.com/thread.jspa?messageID=5736631&#5736631
    Ernie

  • G70-250US notebook synaptics mouse pad will not work & keyboard will only work until I log onto pc

    I have a G70-250US model notebook with Vista 32. I decided to reload OS due to issues with mouse pad and keyboard. I still have the same problem whereby the mouse pad will not work and keyboard will only work until I log in and then it will not work.  External mouse and keyboard will work fine.  I tried uninistalling drivers for both and rebooting and letting OS find new hardware and install the drivers and this still did not correct.  I even pulled down the synaptics driver from HP site and still not working.  I checked the BIOS and it is the most recent. I am at a loss. Any ideas on these issues. 

    Ok I tested a bunch of different Firefoxes on my pos linux box.
    '''''Worked with xmodmap:'''''
    Vanilla 16.0.2,
    Vanilla 16.0B6,
    Ubuntu Firefox 16.0.2 (16.0.2+build1-0ubuntu0.10.04.1)
    '''''Did Not Work with xmodmap:'''''
    Vanilla 17.0.1,
    Ubuntu Firefox 17.0.1 (17.0+build2-0ubuntu0.10.04.1)
    I have an old Dell Dimension 2400 I plan to use as a replacement for the Sony Vaio when it pops. I've held out as long as possible because it lacks a pci or usb wifi and I really didn't want to run 50 feet of cat5 up a flight of stairs to it. [as i type this i think i remember where a linksys stick for it might be]. Yes I guess it's about time I just do that.
    Don't laugh but the reason I held off adding a simple usb keyboard was just lack of space in my tiny bedroom. My setup is on two tray tables side-by-side. Sony Vaio is on left one, my lcd monitor and mouse are on the other. I barely have room to put a cup of coffee on the one with monitor and mouse let alone a full size usb keyboard lol.
    Anyway thank you again for all your help.

  • My Hp Pavllion dv7 keyboard and touch pad will not work

    Hi. My Hp Pavllion dv7 keyboard and touch pad will not work. Been going on for a few months now. Read in the support forum that replacing the battery might help however it hasnt. Ran updates for Windows Vista and Microsoft Security Ess. Boots up just fine however unable to place in my password to get to my user profile and always have to work from guest......unless I have a USB keyboard handly at the time. I use a USB wireless mouse as well.
    Please help and thank you

    The keyboard and mouse (touchpad) are separate devices which could go bad at the same time but that would be a huge coincidence. I would try reseating the ribbon cables to the motherboard for both. Here is the Service Manual:
    Manual

  • Printer will not work after update to Mavericks

    I have a macbook pro and an HP7280 printer connected wirelessly.  After upgrading to Mavericks the printer will not work.  The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading)  When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed.  So I deleted the printer and reset the system and then added the printer back on - same thing.   Any ideas??

    It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
    With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work?

  • ITunes PLAY/PAUSE Will Not Work After 10.5.4 Install

    I have just installed Leopard 10.5.4 on my iMac G5 and iTunes player will not work. When I select a song, it will show in the player window, but, PLAY/PAUSE button will not function. I have checked iTunes Prefs and see nothing there that is not correct. I am able to navigate throughout iTunes and everything seems to work as before EXCEPT Play/Pause. (Actually, I don't know about PAUSE since I cannot get PLAY to work).
    ???????????

    Raymond Rogoway wrote:
    Used Software Update to update to 10.5.1. Now my install disk will not boot. Drive kicks out disk after awhile. Ran Disk Warrior which reported no changes. Repair permissions.
    Ray
    Does the disk also get ejected when you are running Leopard, or only when using it for booting?
    Have you looked at it physically for scratches or that dirty film some DVDs had?

  • Iphoto will not work after uploading yosemite

    After uploading the Yosemite upgrade. The iPhoto will not work. I have done what the software recommends. I have deleted the app and reloaded it. I get the same message. The message that i get is:
    your photo library is either in use by another application or has become unreadable.
    shut down and restart your computer and then open iPhoto again. if the problem persists. try rebuilding your photo library. to do this quit iPhoto, and then reopen it while keeping the option and command keys pressed. you can also try restoring your photo library from a backup.
    Any suggestions or help would be greatly appreciated.
    Matt

    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

  • Ipod classic will not restore and will not work after many attempts

    I have purchased and replaced 3 ipod models, This is my third one (80GB ipod classic) and with out fail after 1 year and 2 months after buying it, it stopped syncing with my itunes and now after 5 attempts to restore it will not restore and will not work. I am sick of this and find it preposterous. What is wrong with ipods..? what is wrong with my recent one?

    I have tried to restore via itunes and I still get the same message on the Ipod after many many restore attempts."Use iTunes to restore" with the picture of a plug on the screen and then it just shuts down. Exactly 1 year and 2 months after I purchased it as was the previous Ipod I had in 07.... what is going on?
    Are ipods not made to work with both macs and pc's? it seems they just shut down after a while
    what can I do?

  • My front camera will not work after I downloaded the IOS 7.0.4 .. Why is that ?

    My front camera will not work on my iPod 5 after I downloaded the IOS 7.0.4! Why is that ??

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

Maybe you are looking for