Glitch After Burn.

17.3 gb h.264 masterfile. No problems in the master file. Just a simple menu, does have song in menu. Encoded into professional quality to DVD-5. Burn speed I have tried from maximum all the way to 1. The DVD is fine for a while , then it glitches or stops for about 2 seconds and continues playing. Does this several spots in the DVD. I have tried 2 DVD players and 3 discs with the same result .

Do you have a slideshow in iDVD with more than 99 slides? If so that's the cause of the pause. By design video DVDs are only allowed 99 chapters in any item, movie or slideshow. In slideshows each slide is a chapter. iDVD gets around this by renumbering slide #100 back to 1 and goes from there.
I've minimized but not eliminated the pause by using top grade media, burning at 1x (as you did). However, some DVD players don't handle it as well as others. For me my cheaper Sony DVD/VHS machine handles it better than my more expensive Sony DVD only machine. Go figure.
To get around it is to create the slideshow in iPhoto and use the Export button at the bottom of the window to export at Size = Medium or Large.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Similar Messages

IDVD glitch after burn.

17.3 gb h.264 masterfile. No problems in the master file. Just a simple menu, does have song in menu. Encoded into professional quality to DVD-5. Burn speed I have tried from maximum all the way to 1. The DVD is fine for a while , then it glitches or stops for about 2 seconds and continues playing. Does this several spots in the DVD. I have tried 2 DVD players and 3 discs with the same result .
Final Cut Pro X, OS X Mountain Lion (10.8.2)

Hi there MidwestMass
For me, here's what comes to mind from my experiences. First, use quality media. Cheap brands tend to use less dye on the substraight. So, they don't burn very well. Make sure your harddrive and monitor is not set to sleep. If the sreensaver comes on during the burning process, you may have some issues with playback. Close all programs except for iDVD.
Also, how often do you use the burner? If you've burned a lot of DVDs, there is a possibility that the laser is not working as well as it once did, hence a low quality burn -- and again playback problems. Where is your project stored? If the disk speed is less than 7200 rpm, you may experience problems. And last, if you're using an external drive how is it connected to the Mac - USB, firewire, Thunderbolt. Some posters claim that they experience no problems with USB, but just as many say a USB connection creates problems. Personally, I prefer firewire.
I hope you get the problem solved.
Carl

Poor audio after burning

Hi there,
Hope someone can help me with this...
I have made a SD DVD by converting my uncompressed quicktime files through compressor to gain MPEG2 video files and AC3 audio files.
Everything looks and sounds great when I simulate everything, but after burning the audio sounds really clunky. The fades in and out don't work at all and it really doesn't sound good at all.
In the compressor settings I put normalisation off (to -31) so not sure why this is happening, especially as all seems to be working fine when everything is simulated...
Could anyone offer any suggestions to fix?
Thanks
Matty

Take a look here
http://dvdstepbystep.com/compressor.mov
and in the second half there are settings. Make sure Preprocessing is set to "None" as in the first image below. The other settings usually also help prevent glitches, audio rate (160/192 etc) can change a needed. Also, how were you listening to the audio? Computer? Television? (I have one tv that is bad for audio)
!http://dvdstepbystep.com/FASTTRACKWEB/07_FTW.jpg!
!http://dvdstepbystep.com/FASTTRACKWEB/06_FTW.jpg!
!http://dvdstepbystep.com/FASTTRACKWEB/05_FTW.jpg!

Hard drive glitches after battery replacement... normal?

Hello, I have a 4Gen 20gig ipod with click wheel and I just replaced the battery myself last night.
I then plugged it into my computer to sync and it was recognized by windows, but not by iTunes, the hard drive would whir, then click and then try again, then stop. I figured it was just that the battery wasn't charged enough yet, so I let it charge overnight.
In the morning it synced fine. I was then playing it in the car, and some songs would appear, then the hard drive would whir, click a couple of times, then skip on to the next one. After a couple songs it started playing them normal. After skipping a few and the hard drive spun to load more music into the temporary memory, it would whir, click and then skip the song, then whir click and skip that one too... and it kept doing it. Then I reset it, and it kept showing the apple symbol, then the Exclamation and folder icon, then tried restarting again. After trying to reset itself 4 or 5 times, it finally succeeded.
I read a few threads on here, gave the ipod a gentle nudge on the right hand corner a few times, and now its playing and I haven't had any symptoms yet for about an hour.
Is this normal for a hard drive on an iPod to glitch after a battery replacement? I had no such problems when I had the other battery in it, so it's hard to believe that the hard drive is going bad exactly at the same time I changed batteries. It is the right battery for the right iPod, anyone else experience this or have any words of wisdom or comfort?

rsherid wrote:
Pretty fast and non-stop, even when I'm not working. Could it be dirty? Is there a way to clean it?
Does the Apple store charge just to look at something?
Even if the noise was a dirty hard drive you can't clean the innards of one. You cannot even open one. Well you can, once.

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used? So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Have you checked out the topics at the right in the More Like This section?
OT

After burning to dvd, using idvd, movie stops on frame but audio continues

After creating imovie which works perfectly, and also after trasferring to idvd works perfectly, i have problems when playing back dvd after burning to disc. The movie stops but the audio continues. I altered the clip but same thing happened in next clip after next burn. I don't think its a corrupt clip, but maybe something to do with WHEN it occurs in the movie. Any suggestions? After 4 goes and many hours burning I am stumped!

Hi Tomma1
And welcome to apple discussions. It's good you chose to use 16 bit audio for all of your source material. And assuming this is accurate info .... From what I can tell, you are doing nearly everything correctly. However let me ask you a few questions.
1. Are you using the boot volume (the hard drive where iDvd and Leopard are actually located) to encode your dvd (yes/no)?
2. More importantly, does the disc image also go out of sync when played thru apple's dvd player app? or does it only happen on the burned dvd-r?
3. Are you using Verbatim Dvd-R or an alternate brand? if it's the latter, then for troubleshooting purposes while on this forum; please use Verbatim Dvd-R. (it helps us eliminate additional / possible variables). Thereafter feel free to use the media that works best for you and your mac.
4. Have you tried an alternate encoding setting other than pro quality setting? and do you get the same results?

How do i set up my mac to eject cd after burning from itunes play list ???

how do i set up my mac to eject cd after burning from itunes play list ???
thanks

how do i set up my mac to eject cd after burning from itunes play list ???
thanks

GPRM Button scripts work in Simulate, but not after burning

Hello everyone:
I have a question regarding GPRM-based buttons and scripting menu navigation. My scripts work perfectly in DVD Studio Pro's simulate mode, but after building and formatting a DVD, the scripts do not function properly on a set top box, in Apple DVD Player, or when playing from the Video TS folder. The scripts were based off of a tutorial by Hal MacLean at dvdstudiopro.co.uk.
Essentially, I have one track which is accessed via a Main Menu or a Chapters Menu. There is an animation that plays at the head of each menu, so menu has a loop point. The user should return to the correct screen, the correct button should be highlighted, and the menu should jump to the loop point. All of these things happen in simulate mode, but after burning, the loop point is ignored: The correct menu and buttons are highlighted, but the menu plays from the beginning. Here is how the project is laid out:
From the main menu, if the user chooses Play Movie, the following script plays:
mov GPRM 0, 1
Jump Feature
From the main menu, if the user chooses Chapters, the following script plays:
mov GPRM 0, 0
Jump Chapters Menu
Each of the chapter buttons is assigned to the start of a scene. The feature's menu call is assigned to the following script:
mov GPRM 1, SPRM 8
div GPRM 1, 1024
Jump Main Menu(Loop) [GPRM 1] if (GPRM 0 = 1)
Jump Chapters Menu(Loop) [GPRM 1]
I was able to make the menus behave properly by writing the scripts this way:
mov GPRM 1, SPRM 8
div GPRM 1, 1024
Jump Main Menu Script [GPRM 1] if (GPRM 0 = 1)
Jump Chapters Menu Script [GPRM 1]
Main Menu Script:
Jump Main Menu(Loop)
Chapters Menu Script:
Jump Chapters Menu (Loop)
But, although the user is returned to the correct menu and the loop point, now only the default button is highlighted.
Has anyone run into the same issues? Can anyone see any flaws in my scripts, or have any suggests? i would really appreciate any thoughts you all have. Thanks for your time!

Do you have any pre scripts atached to the menus? I was having the same problems as you and found that pre scripts and GPRMs don't play nice (at least in DSP). Removing the pre scripts solved my issue.
http://discussions.apple.com/message.jspa?messageID=4643747#4643747
Good luck!

After burned to dvd the edge are cut off in my tv screen. looks like zoomed

hi
i am FCPX user. i create my project using format (resolution )as showed on the pic below
after burned to dvd the edge are cut off on my tv screen. looks like zoomed as showed in the pic below.
thanks for taking ur time to help me!!
then i export using master file as
showed on pic below
and after i burn on to dvd my edge are cut off. here pic trying to show before burn on my mac and after burned on to dvd
before burned on to dvd on my iMac screen
AFTER BURNED ON TO DVD ON MY TV SCREEN
i really need ur help thanks
after burned to dvd the edge are cut off in my tv screen. looks like zoomed

Thanks Alchroma
i used this dvd burner just incase..
but i thought i might have wrong settings from begning.
do u thinik this setting is alright when creating DVD
Alchroma wrote:
That thought jumped into my head as well.
If the Safe Area settings are OK then it's well a settings issue in either the DVD player or TV or both.
Al
Alchroma wrote:
That thought jumped into my head as well.
If the Safe Area settings are OK then it's well a settings issue in either the DVD player or TV or both.
Al
thanks again

Pixelated images after burning

A friend of mine is using iDVD to create a slideshow of some photos. The photos look great, and after burning, when playing on either tv's or even other computers, no matter the screen size, all the images, as well as the text that pops up, is all pixelated. But on her computer, they look fine.
She is using RAW images, could this be the problem? She has tried burning for both Widescreen and Standard, with no fix.
I told her to use jpegs, haven't heard back if that worked or not, but thought I'd ask.
Thanks!
Jordan

You gave your friend excellent advice. Most Jpegs will work fine. If you wish to add RAW image files as well then I'd suggest doing so to the dvd-rom section of the dvd (and there is a preference you can select within iDvd that will automatically do this for you).
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6655.html
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6675.html
http://discussions.apple.com/thread.jspa?messageID=8164545&#8164545
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6705.html
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
These 3 apps that specialize in quality slideshows and they come highly recommended on this iDvd forum (especially the first one).
http://www.boinx.com/fotomagico/overview/
http://boinx.com/photopresenter/overview/
http://www.lqgraphics.com/software/phototomovie.php
Message was edited by: SDMacuser

I have finally figured out how to export an iphoto album so that I can maintain the proper order of the photos after burning the file. How do I keep each individual photo title and description after exporting and burning?

I have finally figured out how to export an iphoto album so that I can maintain the proper order of the photos after burning the file. How do I keep each individual photo title and description after exporting and burning? Presently after exporting and burning each photo is identified by the file name rather than each individual title description.

File name and Title are not the same thing.
Filename is attached to the Jpeg file in the Finder.
Title is attached to the photo within the Jpeg file - as is the description. These are written to the Exif and IPTC metadata on export.
So: File -> Export. Kind: Jpeg or Tiff and Check the box at 'Title and Keywords'. This will write the Title, keywords and descriptions (though not explicitly stated) to the metadata. This can then be viewed in any app that understand this material.
You can choose, if you wish, to also use the Title as a Filename - that's an option at File Name
Regards
TD

After burning a audio CD, the Create LightScribe Label window does not show

I found burning a LightScribe label after burning with iTunes directions. It says that iTunes works with Sonic Express Labeler. After burning the CD, a Create LightScribe Label window is supposed to appear. It does not. Why? Help!!
HP Pavilion a1220n Windows XP
HP Pavilion a1220n Windows XP

No one answered his question. On HP it says:
Creating a LightScribe label with iTunes
iTunes works with Sonic Express Labeler to conveniently burn labels on a data CD or audio CD from iTunes. The playlist you create in iTunes to burn a disc is automatically imported into Express Labeler so that this information is available for you to use on your LightScribe label.
NOTE: To use Express Labeler from iTunes, the data or music tracks in the playlist your are using must fit on a single CD.
Click Start, All Programs, iTunes, and then click iTunes again.
Burn a data or audio CD with iTunes. When the burning process is complete, click Yes on the Create LightScribe Label window.
Make sure that Disc Label is selected in Step 1: Select Project.
Select a label template by clicking the left or right arrows next to Layout and choosing a layout.
NOTE: The various layouts show different amounts of playlist information. Some show only the playlist title, others show the playlist title and track names. You can edit the playlist information by clicking Disc Title to open the Edit Disc Title window.
Click Tracks to display the Edit Tracks window. Click New to display the Track window. Enter text to identify the first track or file (you can optionally enter artist and date, or length), and then click OK.
Repeat step 5 for each track or file on the disc.
Click the left or right arrows next to Background to select design elements for the disc. The selections you make are previewed in the disc window.
NOTE: If you use a color image, LightScribe burns it as a greyscale (monochrome) image.
When you are satisfied with the appearance of your label design, insert the LightScribe disc (label-side down) into the disc drive tray and then click Print.
From the Disc Label menu, select LightScribe 12cm Disc.
Select a Contrast Level and then click OK to begin burning the label. The estimated time to complete the label is displayed, along with a progress bar. You can continue to work on your PC while LightScribe is burning the label.
NOTE: A sudden bump or vibration of the computer during the labeling process may affect the quality of the label.
His question is why this does not happen. What version of iTunes are you using? Is an upgrade to the newest version needed? I woul dlik eto hear form others who use lightscribe with itunes and how they do it.

After burning 3 dvds, got error 0x80020022 on MATSHITA DVD-R   UJ-845 Drive. Used 1x speed. iMac G5 PowerPC

MATSHITA DVD-R   UJ-845:
Error message: 0x80020022.
Got this after burning 5 other discs. Two of which didn't burn and ejected. When I inserted them again, they did not appear on desktop. Had to use Disc Utility to eject them.   After those two issues, this message showed up when re-trying the burn process.
What must I do to get this drive to burn the discs?

Thanks for the info. I have another question pertaining to your answer: "What speed would be best to use so the drive doesn't become HOT--- lowest speed for a longer period of time. . . OR . . . at a faster speed for a lesser time?
Also, I tried using it half-hour later and got same result. I then waited 1 hour longer and it worked then.
Thanks to all letting me know to cool it off!

Glitch After Burn.

Similar Messages

Maybe you are looking for