Glitch and slow motion

when i play my music, the song starts normal, and then it starts to glitch, skip, and slow down. Anyone know what to do? Help would be amazing because this is very annoying! Thanks!

Ok so I did nothing and now it's working fine....I guess I just needed to wait for it to load a bit.....
I would still appreciate some feedback on how to avoid this issue.
Thank you.

Similar Messages

HVX200 and slow motion

Hi,
Despite having read several how-to articles, I am still a little unclear on how to make best use of the HVX200's variable rate feature.
What I have done successfully is the slow motion feature that's described here:
http://www.studiodaily.com/studiomonthly/tutorials/trainup/5993.html
First of all, is that generally considered the correct setup?
If so, what's the best way to handle something that I might want at normal and slow motion? For example, a skating coming towards the ramp should be at a normal frame rate but on the jump, I want to use slow motion. Would I shoot all of it at the faster rate described above, use that directly in the 24p timeline for the slow motion part and convert the rest the clip to 24p? That is what I assume, based on reading this
section of article on the History Channel shoot:
O’Brien added, “The most useful feature of the camera was its ability to shoot 24 or 60 frames for any particular shot. Having 60 frames to use as a slow motion shot in a 24 frame timeline was the closest I've come to the days of 16mm, where you could dial up to 72 frames for slow motion. The 60-fps shots can be easily converted in Final Cut Pro to 24-fps if we decide not to use the shot as slow motion. Knowing this, we were unafraid and shot anything that we might want to be slow motion at 60 frames. This gave us a freedom we would not have had on film, where a slow motion shot would be expensive to convert back to normal.
Just writing this down is making me think more clearly that this is the best path but opinions would be much appreciated.
Regards,
fh

Hello and welcome to the forum.
You adjust speed in the Modify menu. Select Modify>Speed or press Command/J.

Are bursts and slow motion videos transfered as they are to a PC

I wasn't sure how to ask this question in short. I have an iPhone 5s and a Windows computer. When I take a burst photo, how does it work when I transfer the photos/videos directly to my computer? (not going through iTunes) Do the bursts save as individual pictures or are they lost? or maybe you can only see them on your iPhone? Also with slow motion videos, I know they don't save as slow motion unless you save them again as if that was real life capture. I do believe that they become slow motion again if i put them back on my phone, as the format is probably the same. Is this true?

Premiere Pro just doesn't do slow motion very well, especially not with 24 fps footage. You can help correct that:
http://forums.adobe.com/thread/1369265?tstart=60

LoSpeed ramping and slow motion?

Hello
I have some dslr and go pro footage shot on different frame rates from 50fps to 120 fps. I want to be able to ramp the speed on the footage. However I keep running into the same problem "Flicker"...
For example I have some dslr footage shot at 50 fps. I can change the fps in, Modify- Interpret footage, to say 25fps form 50fps to get nice slow motion, but then im stuck with that frame rate for the clip.
If I start fresh and use the speed ramp, I get jerky footage when I change the speed.
Is this an after effects task?
I have seen a few good few tutorials but they always separate the two different techniques. What am I doing wrong?.
Best example is all those lovely go pro video with things flying by then gradually going to a slow mo then speeding up again seamlessly without any flicker.
Im not trying to achieve a super slow frame rate like what you might see with twixter, I just want a nice smooth transition from 50fps to 25fps and then back up again.
Any idea or tutorials would be appreciated.
Thanks
Philip

for 'Extracting audio' read advice on my site
http://karsten.schluter.googlepages.com/im08tricks
for slowmo, use a free 3rd party software, illustrated advice on my site:
http://karsten.schluter.googlepages.com/slowmowithim08

Fast and slow motion

Can I use fast and/or slow motion on final cut express 4.0?

Hello and welcome to the forum.
You adjust speed in the Modify menu. Select Modify>Speed or press Command/J.

Reverse and slow motion

I am very new to i movie can one reverse and make a clip go in slow motion in i MOVIE HD?

Hi eyesa -
Beverley has done the 'finding' for you, but actually, she should not have had to.
Rotorius had explained the steps to find the info you needed in iMovie Help.
...I have tried that and found nothing..
Perhaps you did not operate the search function correctly, because by entering the word 'reverse' in the search box, you definitely will get the answer you needed. I wonder if you were maybe using the Search Discussions in this forum, rather than the Help menu in your iMovie project?
I am only posting this to explain that you can use that very useful Help file to answer many of the questions you may have. By all means ask the forum for help when that does not produce an answer.
I know it's all a bit of a puzzle when you start out:-))

Looking for DVD player that will repeat a segment (loop) and slow motion

I have iDVD and the DVD player in Snow Leopard, but want to be able to play a dvd in step-by-step frame, and also (especially) to loop round smaller segments. I use it for dance video, and need to see dance moves over and over without necessarily playing the whole segment. Is there any software I can buy/install to do this? Like Cyberlink for Mac? Thanks.

I searched for a DVD player with a jog shuttle -- and you're right. They're all but impossible to find! I havent' found one made in the past 5 years!
I don't know of any way you could accomplish the same thing with software either.
Most DVD players have slow-motion and frame-by-frame features. (Even my cheap $40 Toshiba.) That may be the closest to it.

Pixelated glitches and slow screen redraw

Mid 2010 27" iMac (iMac11,3) with Radeon 5750 (1GB) running Mavericks 10.9.1. AppleCare just expired in December 2013 (of course!). Graphics card has been replaced in 2012 via AppleCare. Entire LCD panel has been replaced Jan 2013 via AppleCare. And now another graphics-related problem is back.
The display goes black after logging in to an account after a couple minutes. And there's no way to bring it back other than a forced power off and reboot.
I boot into Safe Mode and the screen redraw is extremely slow and there are these repeating glitchy blocks (see attached images).
Any ideas? Do thse glitches look familiar to anyone? I created a new admin account and the problem exists there too, so I'm pretty sure it's not a bad user pref.

Thanks for your reply.
I am using Logic 9.1.1. on Snow Leopard. Upon installing Logic 9 recently, I noticed that the seemless screen redraws ( from extreme close up to extreme zoom out) takes over five separate attempts. it's like there's only so much video power to do it one shot like I used to.
To be clear, let's say I'm very zoomed into a region editing an vocal comp track. Then I want to zoom out to see the whole project from start to finish. I click the playhead in the global tracks area. Then I push up and it shrinks the project to fit the screen. The problem is that it only goes so far before I have to release the mouse where it is and then try another run at it.
Here's a self-answer:
My feeling is that Logic has made it a more exacting science of how to manipulate the zoom in and out with the playhead. I actually feel it's faster now, you just have to stay within certain limits and not take your mouse and go too far up into the shorcuts area like I was used to in Logic 8. You have to stay within the global tracks area and your horizontal movements will be very fast actually and very smooth.
Happy music making

LR5 is glitching and SLOW...help!

Not sure what's going on with my LR5. I recently decided to make the dive and get LR5 and photoshop. I'm on the cloud plan...or whatever, so it's supposed to update automatically right? Why am I having so many problems? I thought I was supposed to be getting Good photo editing programs....*sigh. My computer is a Windows 7 laptop...is it not able to handle the programs maybe?

Buy It.
Down load the manual here Satellite C655D-S5300 Support | Toshiba look a the memory replacement section Some computers have a maximum amount of memory they will support. You can check to see how much yours will support by using the memory checker at Crucial Home Page | United States (USD) and use their memory checker.
Open the back to see how many slots are full.

Imovie shakes on Slow motion and transitions

Hi everyone, hope someone can help me.
I recently went to a wedding and my mum video'd it. As part of the present for the bride and groom I wanted to get a nice song and put snippets of their day into a small video. I have used either cross-disolve or the other one (overwrite or something its called) in between the clips and I have also slowed one of the clips down to make it look like slow motion. On the computer this was fine and then I put it onto DVD and when I played it through the DVD the transitions and slow motion are really jerky as if its shaking. It doesnt do it all the way through, its really just at the beginning of the DVD and then it settles and the last 30 seconds or so are wonderful. Can anyone advise as to what to do?
Thanking you in advance
Tracey

Tracey: Post your query under the iMovie topic category for probable better response.

Slow-Motion and Fast forward

Hi,
Let me know if you can implement these functions with OSMF.
Thanks
Steve

If you use RTMP streaming with FMS you need to check the docs for NetStream.step() method:
http://help.adobe.com/en_US/FlashPlatform/beta/reference/actionscript/3/flash/net/NetStrea m.html#step()
Implementing this in OSMF is not trivial. You'll need to get deep into the OSMF NetLoader APIs (there are lots of posts explaining how to create custom NetLoaders in this forum).
You can also emulate fast-forward with seek() calls, and slow-motion with pause() calls This might be somewhat easier to implement and it will work for progressive content too, but the performance might be much worse than using the step() approach.
Let us know how it goes,
Andrian

Slow motion and resolution

Will using slo mo (fcp HD) change image resolution?

I am in charge of creating some segue sequences that are experimental in nature with layers, loops, and slow motion. The director posed the question that it might be a too severely "degraded" image quality compared to the other "talking heads". I just want to know what I'm dealing with when it comes to pushing final cut's filters, traveling mattes, etc to an extreme. < </div>
We call those Cool Assignments.
It's not easily answered. The absolute image quality is predictable by knowing how many filters or render steps are in your process. But the apparent image quality may be far better, as noted above. "Pushing" FCP's effects system is easy because it's so limited until you go out to third party tools and then you must have a firm grounding in codecs and compression.
You are going to distract form the heads not by offering up a degraded image as far as pixel quality is concerned. "Degraded" in your case, seems to refer to the deconstruction of the image by deliberate manipulation.
Here's another question, if I create a complicated sequence with layers, mattes, slo mo, etc. then export to a quicktime file to compress and then import it into the main timeline, will this ensure a higher quality overall? < </div>
As Brian and Zap are trying to add, "compress" isn't what you want to do. That's whey many of us move to Motion or After Effects for this stuff and then render to a lossless codec.
bogiesan

Problem with slow motion reversed clips

Hi
I've imported clips into iMovie 11 and can apply slow motion through Clip Adjustments. When I try to do both Slow Motion and Reverse all I get is a still clip. I tried both copying an existing Slow Motion clip and tried to reverse it and tried applying Reverse and Slow Motion at the same time to a normal clip without success. I've tried it with and without Stabilization. Any ideas?

You are not alone! But I have not found a way to resolve the problem either! Could it be a fps problem?

What is the best afordable/free Slow motion plugin for AE CS6?

Howdy! I am new here and I couldn't really find the answer I was looking for. I need a affordable or Free is even better plugin for AE CS6 to do some editing on GoPro footage and some other High fps video. I really want a smooth and minimal blur effect. Doesn't have to be perfect but better than what I got now. Any help is greatly appreciated.
Thank you
Teflon

MOST PEOPLE do not understand frame rates and slow motion. High frame rate compositions do not improve slow motion. Video works the same way that film does. Shoot at a high frame rate and playback every frame on a projector that is running slower than your camera was running. Simple as that.
Time remapping with frame blending is included with AE. If you shoot with your GoPro at 60 or higher just open the footage in AE, interpret the footage as 29.97 or other standard frame rate like 24 or 23.976, then drop the footage in a comp with the same frame rate and you'll have you slow mo with no problem. That's the same thing as shooting film at 60fps or 100fps and threading up the film in a projector that runs 24fps. If you want to slow it down further use Time Remapping.
The only other really good plug-in is Twixtor, but that's expensive. All others are about the same as what's included with AE.

Slow Motion on EX-1

I'm shooting a short comedy with the Sony EX-1, likely for web/DVD. I'd probably shoot the whole thing in 1080p24 BUT I need a few shots in slow-motion by "overcranking" to 60fps - and that is only possible in 720p24.
So, any suggestions as to whether I should (a) do normal shots in 1080p24, and slow-motion shots in 720p24, then mix in FCP; or (b) do everything in 720p24, thus avoiding any mixed format issues?

I guess the reason is to capture at the best quality possible in case I want to move to the big screen or use the higher res version one day. Also, it's nice to have the extra pixels in case I want to do some scaling/zooming during the edit.
You're right, of course, that I'd be up-rezzing the 720p only to compress it again for web/DVD. I'm not sure how much that will muddy it up, but maybe I'll see. (I have another couple days to decide which way to go). That said, I may end up down-rezzing the 1080p, in which case I'll wonder whether it would have been smarter to capture in 720p in the first instance. (Hmm, would there be a difference between "captured as 1080p and down-rezzed to 720p in FCP" footage versus "captured as 720p in the first instance" footage? I'll have to search the boards for that one.)
Thanks again for your insight and advice!

Glitch and slow motion

Similar Messages

Maybe you are looking for