Glitch in exported file

i exported my project using the quicktime conversion. i'm bringing the exported file into another sequence. when i play it back using quciktime or in FCP there are scanline glitches that appear. Anyone know a good seeting to use ???
-Thanks!

Dont use QT conversion just export as QT movie and as Joni mentioned use current settings. I would check make self contained and not select re-compress.
Why export? Just drag the nest or seq into your other seq.

Similar Messages

Anyone else seeing glitches on Export of Mpeg files?

I have seen this problem 2 maybe 3 times on CS5.5 but on CS6 (cloud) I have a major problem with this.
Export the same sequence from the timeline such as a :30 sec spot and the glitch is in exactly the same place each time. If I change the mb/s such as going from 15mb/s CBR to 14.6.. sometimes that will fix it. Others, it just moved the glitch elsewhere in the exported file. I have not been able to exactly track down what is causing this. The timeline plays back just fine.. and if I export the same exact sequence to a wmv there is no glitch. I'm pretty sure that exporting the same sequence to a .mov file also shows no glitch. I searched this forum and found a few others with this problem but no on recently and no solutions to thiers.
Win7 64bit, Decklink HD 3D Extreme, x79 ASUS P9x79WS board with 16gigs of ram. Exporting to SSD drives. Source clips are also on SSD drives. Nvidia 680 with 4gig of ram.
I can update this message with example links to example files that show the glitch if anyone wants to see.
Thanks,
Wayland

Hi Jim,
Here are two .zip files with .mpeg's in each.
http://www.stricklandvideo.com/LXO-ES350-1008-15-BAD.zip
and
http://www.stricklandvideo.com/LXO-CT200-1008-30-BAD.zip
Thanks for looking!

Glitches in ePub File Not Detectable in Pages Prior to Exporting

27 April 2012
Dear Apple Support Community:
Greetings. I am using an updated version of Pages to create a file to be exported as an ePub. The exported file as an ePub is fine when viewed on my iPod Touch as an iBook. However, the ePub/iBook contains some blank pages that I did not insert. Whether in portrait or landscape mode, there are blank pages that should not exist. Again and again, I have deleted blank spaces at the top and bottom of pages in Pages, but the resulting ePub (displayed as an iBook on my iPod Touch) still has blank pages. When I view the pre-EPUB file in Pages, I cannot and do not detect any blank pages.
Does anyone have any suggestions about how I can create an eventual ePub in Pages that will more closely reflect the pages and spacings in the actual, pre-EPUB file?
Sincerely,
Excelsus
P.S. The few images are inline, etc., etc., and the table of contents is fine, accurate, and functional, except that it displays or lists "section" in places that I did not mark up or stylize as "sections" in Pages.
Message was edited by: excelsus

Hi Anne
I wouldn't use Sigil myself. Perhaps you should go back to basics. You seem to be formatting your ePub incorrectly somewhere. I suggest you create a short document of say 16 pages, set it up afresh, using similar chapter headings, subheadings and text paragraph styles as the original, inserting the images inline, trying out the various Anchored Objects Options as so on. Keep testing the output using the IDPF Validator and viewing the ePub on the iBooks reader (if you’re using a Mac). You’ll then discover the various ways of formatting the book to get the effect you want. It might also be an idea take an online course, such as: http://www.lynda.com/EPUB-tutorials/InDesign-CC-EPUB-Fundamentals/143324-2.html?srchtrk=in dex:1%0Alinktypeid:2%0Aq:epub%0Apage:1%0As:relevance%0Asa:true%0Aproducttypeid:2
this course will also help you learn how to convert an ePub file to a mobi file for use on the Kindle.
Derek

Help Needed : Video Glitch after exporting from Premiere Pro CC

Hi all ,
            I have been experiencing this issue for sometime now. I occasionally encounter a video glitch after exporting a video from Premiere Pro CS6 or CC. Sometimes it happens in my NLE timeline , which I have to remove the affected clip that has the glitch/flicker problem from my bin and re-import the clip from my original source, which solves the problem.
             However , the worst part is when the glitch/flicker happens when I have already exported the video when everything seems fine in the timeline of Premiere . My sequence settings do match with the clip . This issue happens intermittently as I always have to hope for the best when the video exports.
Here is an Example of what I mean, the glitch/flicker happens at 3:28 of the music video.
             Hopefully those who have the same issue can share how to troubleshoot this problem . Thank you.
Regards,
Elias Lo

what i did was install final cut pro. I dont have an answer for this but it finish my problem , how i came up with this idea well i have the new mac pro cilinder that looks like a trash can 64gb memory and all the toys to work fast but again the mov files cannot be seen in the desktop cause premiere and mac and windows and all this ******** they fight about , and i also have your problem big time o pn every export.
i have instal final cut onmy older slower imac and i can see everything and the export are perfect
so i just did that and its perfectly fine basicaly final cut does something that makes ur computer and adobe read all kinds of files frames format.   i try to explain this to this adobe premiere enginners but they just say uuuuhhhhh

Error During INSTALL of Application Export File

An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
I am receiving the following INSTALL error:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
Following is some pertinent (hopefully) information:
The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
The common HTML DB (v1.6) instance is on UNIX.
A new Work Space was created on the same instance.
A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
EXPORT INFO -
File Format: UNIX (also, tried DOS but received same error during INSTALL)
IMPORT INFO -
File Type: Application/Page Export
File Character Set: Western European Windows 1252
Target Work Space is newly created on the same HTML DB instance.
INSTALL INFO -
*Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
*Build Status: Run and Build Application
Please refer to above error message.
Again, any insights or suggestions are appreciated.

Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
The "snippet" of Region Sql Select code that relates to the reported error is:
ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
Any suggestions on things to try in order to get application into production is greatly appreciated.
Thanks, Bernard.

Lightroom 5 cannot export files in original Raw format (LR 5.4, Mac, OS 10.9.4).

A client has the following problem: When trying to export files in the original Raw format (.CR2), the operation failed and a dialog informs us that "Some export operations were not performed". We can export JPEGs just fine.
After lots of testing, this is what we discovered: The problem does not appear to be catalog-based; we run into the same problem using a test catalog. The export operation works fine, however, with the same test catalog and images on two other machines, and it even works fine on the same machine with a new user admin account that we created.
So it appears to be something associated with the user account, , or with how LR is interacting with the user account, but I cannot figure out what it might be. We can copy the Raw files when using the Finder to do so. But not via Lightroom. Any thoughts, ideas of suggestion would be greatly appreciated! Thanks, Sean

As part of your testing make sure you've tried exporting JPGs from the same folder as the CR2s you're exporting as original, and export JPGs from CR2s to the same folder as you're exporting your originals. This would test LR's read and write permissions from and to the folders being used.
From this document you can see that all the LR files other than the program, are under the /Users folder with different values possible for each user, so the difference could be that the users that work are using the original LR defaults, if you have just started using LR with them after you started having this problem, or at least that the user with the problem has some oddball settings that are interfering with Export as Original.
Preference and other file locations in Lightroom 5
You can test for the Preferences being off by either copying the preferences from a user that has the problem to a user that doesn't have the problem--probably through an external or common folder, or be deleting the preferences file from the user that has the problem and see if it resolves. Moving the preferences file or renaming it may be better than deleting it if no change is seen, then you can restore the preferences back by moving or renaming the file back to the original location and name.

HOW TO REMOVE HYPHEN IN LAYER COMP EXPORT FILE

HOW TO REMOVE HYPHEN IN LAYER COMP EXPORT FILE IN PNG FORMAT...

I ususally do that type of thing with a state machine... read a token, look for what is next, and if it's the closing token, I don't write it out. You have well defined opening token syntax and closing token syntax, so it should be relatively easy.

Schema Import failed :IMP-00008: unrecognized statement in the export file:

Hi ,
I was running a database schema import from a database DMP file.
I encountered the following error in the log file that was getting generated :
IMP-00008: unrecognized statement in the export file:
All the tables got copied except for one. Now what I have thought of is to import that one table again after taking an export from the prod schema.
But what about the functions,triggers,procedures ?? How do i bring all of them in the schema ?
If reimporting the schema again the only option ?
Thanks
Kk

Hello,
In this order:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1023988
Table Objects: Order of Import
Table objects are imported as they are read from the export file. The export file contains objects in the following order:
1. Type definitions
2. Table definitions
3.Table data
4.Table indexes
5. Integrity constraints, views, procedures, and triggers
6. Bitmap, function-based, and domain indexes
The order of import is as follows: new tables are created, data is imported and indexes are built, triggers are imported, integrity constraints are enabled on the new tables, and any bitmap, function-based, and/or domain indexes are built. This sequence prevents data from being rejected due to the order in which tables are imported. This sequence also prevents redundant triggers from firing twice on the same data (once when it is originally inserted and again during the import).
For example, if the emp table has a referential integrity constraint on the dept table and the emp table is imported first, all emp rows that reference departments that have not yet been imported into dept would be rejected if the constraints were enabled.
When data is imported into existing tables, however, the order of import can still produce referential integrity failures. In the situation just given, if the emp table already existed and referential integrity constraints were in force, many rows could be rejected.
A similar situation occurs when a referential integrity constraint on a table references itself. For example, if scott's manager in the emp table is drake, and drake's row has not yet been loaded, scott's row will fail, even though it would be valid at the end of the import.

Imp-00008: unrecognized statement in the export file

Hi All,
I am trying to import an export from Oracle 8.1.7 source system to Oracle 11.2 using imp . I am getting the following errors may times during the import process.
imp-00008: unrecognized statement in the export file
The character set of Source data base is WE8DEC and the character set of target data base is WE8MSWIN1252 and i get the below statement during the start of the import
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8MSWIN1252 character set (possible charset conversion)
export client uses WE8DEC character set (possible charset conversion)
export server uses WE8DEC NCHAR character set (possible ncharset conversion)
The error imp-00008: unrecognized statement in the export file is it due to the Oracle version compatibility or due to Character set compatibility issue.
I tried to create a new Database on same Oracle sever and i cant find WE8DEC in the list of character set to choose. Please help me on how to proceed.
Regards,
alen.

934571 wrote:
Hi Srini,
Data is getting loaded correctly, but i get several of these error imp-00008: unrecognized statement in the export file messages during the import process, so i am not sure what is missing.
Pl post the complete error message from the import log file.
1) Is it possible to import the dump exported form oracle 8 into oracle 11?? Do we need to take any special care during the import ??
Yes - no special requirements are needed.
2) The Oracale Database character set it WE8DEC, but when i try to create a new database in 11 , i dont find that character set , is the character set obsolete now , if so what character set is super set of WE8DEC ??
Pl post exact OS and database versions. Ideally you should be using AL32UTF8 for all new databases. WE8DEC is a deprecated characterset.
See section 4.2.1 here - http://docs.oracle.com/cd/E11882_01/install.112/e24186/install.htm#BABFDDEA
Thanks,
Alen.HTH
Srini

The export file from a calc script - naming and date/time stamp

Here is a simple calc script to export data.
2 questions:
1. Is there an easy way to add a date/time stamp on the name of the data file so that it does not overwrite the older ones every time?
2. I tried to specify the path so that it write to another server. "\\mfldappp011\E:\Exp_AW.txt". It's not working. How should I specify the path ?
Fix (@Relative("Yeartotal",0),"Actual","Working",&ActualYear);
Dataexport "file" "," "C:\Exp_AW.txt" "#MI";
EndFix;
Edited by: user9959627 on Sep 7, 2012 11:25 AM

Probably easiest to call the maxl script from a command line script, then rename the exported file to include the tme stamp and copy/move it to a location.
Cheers
John
http://john-goodwin.blogspot.com/

Error when exporting file from LR5.2 - file created

After updating to LR5.2, I receive an error when exporting files to another disk drive. a file is created, but a warning appears "Unable to Export: "An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute". I also have CC iunstalled for other applications, but originally installed LR5 as a standalone Adobe application. I tried removing the program and reinstalling through CC, with no change in this behavior.

The answer is in the thread:
http://forums.adobe.com/thread/1303578?tstart=0

Error in writing to export file

Hi,
I am getting the below error on running export:-
EXP-00002: error in writing to export file
The query is as given below:-
exp cam3_mpcb2/cam3_mpcb2@ORA10G file='c:\MPCB_cam_20120113.dmp' log='c:\MPCB_20120113.log'
CAn i overcome this error by adding "ignore" at the end of the query or how can i modify the above query ?

Are there any other error messages that accompany the one you posted?
EXP-00002: error in writing to export file
Cause: Export could not write to the export file, probably because of a device error. This message is usually followed by a device message from the operating system.
Action: Take appropriate action to restore the device. Do you have permissions to write to this location?

Large export file when application contains a BI Publisher report

Anyone have an idea why an application export file grows dramatically when a BI Publisher report template is added to an application? I have an application that was 400+ KB and went to 88+ MB just by adding one report query and RTF template. This results in taking over an hour to import the application.

Each RTF Report layout is converted to an ASCII string to allow the import routine to load the rtf as part of the application.
If your template has any embedded graphics e.g. a logo then this SIGNIFICANTLY increases the size of the ASCII encoding of the template.
Hope this helps.

Error while rendering: Export file not found - what to do?

Hi,
I have been editing my video in four different premiere pro projects (as I got adviced to do from these forums because it's AVCHD clips). I have rendered these four projects and burned to four DVD's (total playtime is around 1.5hours) - which is working fine.
But then I try to import all four projects into one big master project because I want to make a blu-ray iso. The import goes fine (I import like this: File > Import > Choose project > Import entire project)
I export to encore, make the menus etc. and click "build" to start rendering. The problem is that after some time I get this error:
Blu-ray Object: "sequence-name-here/project-name-here.prproj", Export file not found
I have seen this error before while rendering some of the four individual projects - but when I saw them I simply just tried again by exporting to encore from the projects again. This seemed to work - but with the big master project I have tried several times with no luck.
Can anyone help me fix this issue? :)

Yes, I got this too:
For posterity, here is what I have found that completely fixes this error, repeatedly: Clear Encore's cache. Specifically:
Close your Encore project and exit Encore
Go to the cache subdirectory named for your project (ie. if your save file is c:\projects\mymovie.ncor then go to c:\projects\mymovie\cache)
Delete the file "mlf.cache.v10"
If your Encore project contains any Premiere Pro dynamically-linked assets, start Premiere Pro and load at least one of the projects used in Encore. (I have found that this reduces memory usage -- for some reason, Premiere Pro takes up less memory than if Encore spawns the PProHeadless.exe media server to serve the same function)
Restart Encore and load your project
...and wait, patiently, for Encore to re-scan all of your assets and build up the cache again and don't touch it until it's finished. I use Process Explorer (http://technet.microsoft.com/en-us/sysinternals/bb896653) to watch my disk activity and CPU to know when Encore is finished (just hover on the cyan-colored graph and you can see what program is performing the most disk activity). Once it's all finished, I save, then immediately try to build my project again. For proof of concept, my 40GB BD-50 project just built last night after getting this error yesterday afternoon.
If any of your assets are not transcoded before you begin this process, transcode them all, then start this process over again from step one. Clearing the cache does not clear the transcodes.
I hope this helps someone. I was not looking forward to completely re-authoring my project, which I've been working on (on and off) for a few months.

Apex 3.1.2.00.02 creates invalid export file (that gives ORA-20001 error)

Hi
I want to let you know, that sometimes APEX 3.1.2.00.0 creates invalid export file.
Older apex 3.0 created correct file.
For example: our application has page button, where "Optional URL Redirect" is:
Page: &APP_PAGE_ID.
Request: FLOW_XMLP_OUTPUT_R11531800061044170_et
If we export application into file f110.sql and try to import it to the same workspace on the same server, we get error:
{color:#0000ff}ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 28, column 111: PLS-00103: Encountered the symbol "_" when expecting one of the following: ) , * & | = - + < / > at in is mod remainder not rem => .. <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_ LIKE4_ LIKEC_ as between from using || multiset member SUBMULTISET_ The symbol &a
{color}In exported f110.sql file the invalid section is:
{color:#0000ff}wwv_flow_api.create_page_branch(
p_id=>11762805016890347 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_flow_step_id=> 4,
p_branch_action=> 'f?p=&APP_ID.:&APP_PAGE_ID.:&SESSION.:FLOW_XMLP_OUTPUT_R'||to_char({color}{color:#0000ff}{color:#ff0000}*10255206661122183_et*{color}+wwv_flow_api.g_id_offset)||':&DEBUG.:::',
p_branch_point=> 'AFTER_PROCESSING',
p_branch_type=> 'REDIRECT_URL',
p_branch_when_button_id=>11761415275883875+ wwv_flow_api.g_id_offset,
p_branch_sequence=> 10,
p_branch_comment=> 'Created 20-JUUNI-2008 12:05 by XXXX');{color}
If we exported the same application in apex 3.0, this section was correct:
{color:#0000ff}wwv_flow_api.create_page_branch(
p_id=>11762805016890347 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_flow_step_id=> 4,
p_branch_action=> 'f?p=&APP_ID.:&APP_PAGE_ID.:&SESSION.:FLOW_XMLP_OUTPUT_R*10255206661122183_et*:&DEBUG.:::',
p_branch_point=> 'AFTER_PROCESSING',
p_branch_type=> 'REDIRECT_URL',
p_branch_when_button_id=>11761415275883875+ wwv_flow_api.g_id_offset,
p_branch_sequence=> 10,
p_branch_comment=> 'Created 20-JUUNI-2008 12:05 by XXXX');{color}
Best Regards,
Tõnu

Thanks for pointing that out. We'll fix it. It does appear though, that in 3.0, the offset would not be added to the number part of the request value, so if you installed the application as a different application ID or into a different workspace, the request would have failed.
Scott

Glitch in exported file

Similar Messages

Maybe you are looking for