Glitch? track creating a new track...

ok, so lets say I have 3 tracks... and in my window, you can see both "tracks"' and "mixer"(with volume/pan/level)
when I push the big "+" to add a new track, it "collapses my tracks" ( as if I am pushcin the little arrow at the top right by "tracks") - now the mixer is no longer visible for each track...
so then, I push the arrow again, and each of the tracks fall down into their place, as they should, but only like part of the gray box for each track (like where it says new track) is visible... I have to roll my mouse over the box for the rest of it to show up.. does that make sense.. it seems like some sort of graphic glitch- it is the latest version of GB.. I don't get it... on top of all this, my mixers have dissapeared again too, so I have to push the arrow again..
in short, every time I create a new track, I have to click the arrow, then roll my mouse over the gray boxes for me to able to see them, then click the arrow again so the mixer pops back out.. its strange..
I am new to GB, but want to know if this has happened to others, or if anyone knows how to fix it.. its annoying!
thanks
in short, after I

I really appreciate that. I went through every setting I could think of and didn't "check" or uncheck the obvious. Lifesaver.

Similar Messages

Problem while creating a new track

Hi,
When we create a new track, we get the following exception:
Unexpected error; inform your system administrator: com.sap.cms.util.exception.CMSUnexpectedException: com.tssap.dtr.client.lib.cms.DTR.connect(Ljava/lang/String;Lcom/tssap/dtr/client/lib/protocol/ISessionContext;)V
We have created a new product and a software component and defined the dependencies for the software component (SAP_BUILDT, SAP_JTECHS & SAP-JEE). In the CMS, we have done Update CMS. We are able to see the software component and have added the same in the 'Software Components for Development'. All the usage dependencies are clearly visible.
When we save the track, we get the above exception. Can any one of you please respond this query?
Thanks in advance.
Regards,
Ravi

Hi Ravi,
We enocounted a similar problem once. For our situation it was a missing DTR url in the lanscape configurator. To check/fix this do the following:
1) login to CMS
2) click on the Landscape Configurator link
3) if not already selected, choose the track in the list of tracks on the left
4) click on the Track Data tab for the selected track
5) verify that the Design Time Repository URL is specified and correct (e.g. http://<server>:<port>/dtr
Save the configuration.
Hope this helps.

Problem in creating a new track

Hi,
I am trying to create a new track in NWDi like this
1.created a product,sofware unit and software component and defined the dependencies(required components like BUILDT,JTECHS etc)
2.Went to landscape configurator and clicked on track data and enter the track name and add the sc created .
3.After adding the sc created required components came automatically in the track data screen.
4.i saved the track data then it says track is created
5.I went to NWDS and trying to import that track.
6.i can see all the components in that track but inside each component like BUILDT i dont see any sda files(external libraries or jar files) they are just empty.
Did i miss any step here in creating the track
please help me in resolving this issue
Bala

I followed the same steps as mentioned below
1. you are running JDI on SPS12
2. you have defined your software component "mycomp" at the SLD
3. you have declared the three SCs BUILDT, JTECHS, JEE as
dependent SCs for "mycomp" at the SLD
4. after these you did an "update CMS" at the "domain data" configuration
5. you created your track and choose for your SCs "mycomp" as software component.
and now:
6. When i added the developed component it brought all the required (JTECHS,BUILDT,JEE)components in the Landscape configurator. You already defined the usage of these SCs
in the SLD at step 3.
In older Versions of the JDI (e.g. SPS10) you saw after the choice
of "mycomp" inside the track data also the dependent SCs. This is
not the case any more in SPS13.
Summary: only define your dependent SCs at the SLD, update CMS,
remove the definition from you track directly and try again.
But the problem is when i go to Transport Studio and checked in in check-in tab and after went to development tab and imported and after sometime it is saying import failed.And when i go to NWDS it is bringing all the scs in my trck but there are no libraries in my scs
I did observe a problem in CBS for this new track
when i go to CBS and select my track and look for DCs in JTECHS,JEE,BUILDT scs there are no DCS(0 dcs).
I think if i can resolve this i can create a new track without any problems
Please help me in resolving this issue

How to create a new track with existing changes in the production

Hi
I need to create a new track for the ESS package with the existing changes that we already made to the ESS package. We already have a development track and the customisation to the ESS package has been already done in that track. Now my requirement is to create a new track ( DEV, CONS, TEST and PROD) with DEV having all the existing changes we made. In short how do I import the SCA's from development track PROD to the new track DEV. We are on NW2004 SPS20.
points rewarded for helpful answers
Thanks
Sheril

Param
Have you done the import in DEV and CONS and then Assembled .. ?
If yes then go to /usr/sap/jtrans/CMS/archives/.......... -> check for the track name and then the last .SCA file in it . Copy that SCA file in the /usr/sap/jtrans/CMS/inbox and go to the new track and configure the checkin to inbox ... You should see the SCA in there ... check those in and you are ready to have those SCA in your Production track ..
If no then you need to know the NWDS functions .. I shall send you the details to bring the incomplete changes (not assembled) to new track .. let me know if the first one worked ..
Thanks
Rahul

I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as tambourine? its really annoying

I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as the tambourine coming out with a really distorted sound. I've managed to record over the top of a guitar before and add diferent riffs and sounds but I've tried all of the settings but its still not working. Basically I want to record different tracks without it recording my previous guitar riffs as well. Help would really be appreciated.

Ah that was it, thanks a lot common sense really but thanks for the help

CMSUnexpectedException when I create a new track or copy.

Hi,
When I create a new track or copy track CMS'll retrun an error
Unexpected error; inform your system administrator: com.sap.cms.util.exception.CMSUnexpectedException: CBS Server Error: CBS failed to communicate with some other server( internal code: COMMUNICATION_ERROR)
I restart JDI but it still error.
What should I do?
Regards,
Khempat

I find a answer in topic ht[CMS SCA imports fail & CBS error while activating|CMS SCA imports fail & CBS error while activating]
tx for ur care

When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select. Anyone else noticing this?

When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select. Anyone else noticing this?

Look at it this way: there is no need to record that effect onto the audiofile. This is a great advantage of modern recording, and this is how most DAW's work by default. Just leave the plugin on when playing back.
Only for CPU management reasons it may be advantageous in certain situations to either freeze a track or bounce it in place (both techniques will render an audiofile that may include the effect). But in general it is a (very) good thing that it is possible to tweak any effect after recording, and have a clean, unprocessed recorded signal to work with. And if the effect was perfect at the time of recording, well, just leave the plugin(s) engaged.
http://help.apple.com/logicpro/mac/10.1/#/lgcp8ae5826e
http://help.apple.com/logicpro/mac/10.1/#/lgcpf1cbfd51
ps: there is a way to record plugin effected signal live into the audiofile, but it involves creating a custom environment setup.

When I create a new track and region, the new region copies the previous region contents; why?

In trying to experiment with new instruments included in 10.1. , I create a new instrument track and region, nominate the new instrument, and... I see that the empty region I just created isn't empty at all, it is filled with the notes created in a previous track, and no sound... is this a glitch or am I doing something wrong?

You can highlight the URL in the Location Bar of a Tab you want to duplicate and use '''{Alt + Enter}''' or you can '''Middle-click the Reload button''' at the right-side of the Location Bar (no need to highlight the URL there).
Both of those methods will work whether you have '''''Tabs on Top''''' selected or not.

Is it possible to have track and region parameters boxes under the inspector hidden by default when creating a new track?

I often need to access the effects section and/or select a different midi instrument and have to manual minimize these boxes. It would be nice if I could have these hidden by default as I'm accessing the portions covered by the track and region parameter boxes more frequently than I'm accessing the boxes themselves.
Thanks!

Before answering your question, you have to make sure you understand the difference between the different track types in GarageBand.
Tracks, you record your music on
There are three types of those Tracks.
MIDI Tracks (aka Software Instrument Tracks)
Audio Tracks (aka Real Instrument Tracks)
Drummer Track (only one per Project)
Global Tracks
These are the Tracks that can be shown/hidden at the top of the Tracks Area for specific purposes.
Arrangement Track
Movie Track
Transposition Track
Tempo Track
Master Track
This Track can also be shown/hidden in the Tracks Area. Please note, you cannot delete that Track, only hide it, similar to the Global Tracks
Regarding the Tracks you record your music on, you can delete any of those. It doesn't matter if you created them or there are part of a Template (maybe that is what you refer to as the default track). Once you delete the last Track, the "New Track Window" will pop up to add a new track.
I will explain all that in much more detail in my manual "GarageBand X - How it Works".
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

No input signal after creating a new track in logic 9

i am working on a song and have 14 audio track used and 5 midi . i try to create a new audio track but i have no input signal ,only the output is working.i did a upgrade recently but i am not sure if that is the problem.can someone help?
ps: i have no input if i record or if i playback,but it does record and i can adjust the volume ,just no signal

have you selected the proper input on the channel strip that matches the one your instrument or mic is plugged in to?

How are pre-named software tracks different from 'new' tracks ?

We have these software tracks or audio tracks with names like Percussion , guitar , piano etc......how are these tracks different from a track which we make from menu as a new track ?
Like we have various effect presets in guitar tracks is it so all these pre named tracks have some specific presets assigned ?
or if I'm recording in a midi track it can be any name all the tracks have same parameters and a region will sound same in any of them effectwise ??

All predefined instrument patches are having a set of suitable effects and filters assigned. YOu can see these in the "Info" panel, after you select an instrument your track. Click the "Edit" tab, and you will see, how the predfined patches differ.
For a midi track, the sound generator will differ dependng on the instrument group, and some basic effects will be predefined, like "Compressor". YOu can click the empty bricks to add your own effects.

Create a new track for SAP E-Commerce 5.0

Hi all,
I have all the SCA files with me for the E-Commerce application.
I want to create a track so that I can access it in my NWDS
Can anyone help me in creating a track for SAP E-Commerce.
How to go about it please let me know
SCA Files
1)CUSTCRMPRJ
2)SHRWEB
3)SHRJAV
4)SHRAPP
5)CRMWEB
6)CRMJAV
7)CRMAPP
8)STRUTS
9)TEALEAF
10)JTECHS
11)JBUILD
Regards
JM

Anil,
I would highly appreciate if I can have that from you.. https://forums.sdn.sap.com/profile.jspa?userID=1532856
Thanks Anil!
Kiran

Can't create a new real track...

Ok I've encountered another problem, and this one prohibits me from doing basically anything. The last problem in the post I made with the title "Mysterious crackling/buzzing" seems to have worked itself out (yes!!!). First I'll tell you my setup. I have a guitar (with active electronics if that helps at all which i doubt...) plugged into a Line 6 POD XT Live which connects to my compter via USB and I play through GB on tracks with no effects in Channel 2 (Mono) with the monitor usually on. Well, that is, until now. The only way I can hear my guitar or have any signal through GB is if I'm in a previously saved project which already has tracks on it that are available for recording/playing. I can record and play fine through these tracks, but when I try and create a new track (Real) absolutely nothing happens. I go to track/new track/real/create but bsaically all that happens is...well...nothing. If I have selected a track (which works fine if I created it before the problem started) and I try and create a new one, it just does nothing and hs no effect on the elready existing track I'm on. More annoyingly, if I try to make a track on a brand new project, I can only make a software track, but the exact same thign happens when I try to create a Real track. Nothing. Plus, when I'm in a previously created project, and I use a track that I made before the problem both of the boxes that are supposed to show if you want a guitar/vocal/bass all of that stuff on the left, and the box on the right have nothing in them. Completely blank. I belive this may be a similar problem to the one I had in my previous post titled "How do I create new real instrument track?" Here's the link:
http://discussions.apple.com/thread.jspa?threadID=542431&tstart=0
In this problem I was using GarageBand 2 and I was playing through an M-Audio FastTrack USB, but the only difference I believe in the two problems was that I could create a new real track, but there were the words "no track selected" in gray (unable to be clicked) in the left box, whereas its impossible to create a track in the first place with the problem i have now. Also, no one could help me on the last problem, and I had to delete GarageBand (but I had to buy iLife '05 again since we lost the install DVD) after I called the support team from Apple, and talked to one of the head guys who was completely baffled. So that's basically all i can describe with my limited knowledge of technology, oh and I deleted the .plist and.cs files and repaired permissions (again) if that helps.

'tis all good right now, just checked on another post dealing with the smae problem, unfortunatley i was forced to downgrade to GB 2.0 but hey, it's only until i can find the iLife '06 DVD.

Creating new tracks (any kind)

I´m getting a bit frustrated here now. I can not find a simple quick way of creating a new track (object) in the arrane window. I know Logic is a very customizable DAW, but I would like an easier way. Like control clicking in the tracklist and then choose track/object type. I´m still a novice here, and I may have missed something important and obvious, but if you have to go into the environment everytime, or create templates, it´s too much. When Steinberg and MOTU have done it, why not Logic? It should be right up there! Maybe it is, and I´ve missed it. Can´t find it in the manual, though. Any of you seasoned users got a tip? I´ll be happy to eat some humble pie if I can stand corrected here

Hi
That was quick :o)
Ok:
If I have an instrument track with Stylus RMX on it, then try to use the mentioned procedure, what happens, is I get a copy of the RMX track. If I then remove RMX on the copy, it also disapears on the "original". And I didn´t want an instrument but an audio track. Where do I go wrong? I can´t find it in the manual.
I work with a lot of different projects and with different DAWs, Nuendo, Samplitude, DP5, Pyramix, Live, Acid, and they all have their strengths and weaknesses.

Creating new track - software catalog new product not showing up - Help!!!

Hi,
Creating a new track for custom development.
A new product has been added in the software catalog in SLD.
SLD and NWDI (netweaver 04) are on the same system.
The new product is not showing up when trying to select in the new track, Software Components for Development section. Why??
Does the server need to be restarted after adding a new product? This is difficult for us as SLD has production systems tied to it!!!
Thanks in advance
Regards, Neeta

Thanks - This did the trick. I have awarded points!!!!
Regards, Neeta

Glitch? track creating a new track...

Similar Messages

Maybe you are looking for