GLM: use scenario as validity area in label data view

Hi experts,
In the view label data of the material master I managed data for the labeling determination of GLM.
I understood that is possible to use scenario as validity area in this view in order to narrow the results of the label determination by scenario and packaging unit.
Could you detail me please how to proceed (custo + data + ...) to use this features?
Thanks and Regards,
/Ludo

Hello MIke,
Thank you for your reply. I followed your instructions then I maintened my scenario as validity area in label data but the system doesn't found label in GLM.
In activity "Specifiy Validity Area Categories", do I need to specify a table, a field and a validity area check function?
Here the log of GLM:
-Label category ZLB_REG2 filtered using validity area SCENARIO ("strange because I put "GENERIC" in label data as validity area)
-No gen. variant found for mat. 000000000000090026, packag. unit DR, and label cat. ZLB_REG2
If I delete the validity area "GENERIC" in label data, system found label.
Regards,
/Ludovic

Similar Messages

How to remove a text in browser: Some plug ins used by this page are out of date

How to remove a text in browser: Some plug ins used by this page are out of date. It occur in every page when I surfing. I am aware that is a threat but when I tried to install an update of flash the userinit.dll file from windows registry had gone and I had to reset everything.

a error during the flash update might be itself an indication of malware active on the pc. the browser is your door to the web - therefore it's very important to keep it and all plugins up to date in order to keep your pc & the integrity of your personal data safe.
[https://www.mozilla.org/plugincheck/]

Possible to block when browser says some plugin used by this page are out of date?

Possible to block when browser says some plugin used by this page are out of date? I want to block the message.

Hi I upgraded to latest version of Snow Leapard 10.6.8 from 10.5.6 and I was able to download latest flash. A screen told me to upgrade and it point me to the website. Ty

Label Data view in the material master

Hi all,
I read this SAP help portal that said "The Label Data view in the material master allows you to display or edit label data that is specific to the material. "..
may I know where I can find this view in the material master?
Thanks
Karen

Dear Karen,
This "Label Data" is one View in Material Master.
While creating the Material using T.Code MM01, when you are on the Selection screen of Various views, it is Last Option.
i.e. Lable Data
If this view is not there while creating the Material. then it is MM Configuration.
That view is assinged to Material Type.
See in Material Master, Industry Sector and Material Types controls these Views. So with the help of MM Consultnat you
have to get that View Configured to your Material Type.
If you find my answer satisfactory, please grant me the points.
Regards,
Amol Joshi

Label Data View in Material Master

Dear Team,
Despite of performing all below standerd steps, i am not able to view Label Data view in Material Master.
pls guide
steps performed.
1. Check whether the screen sequence SP exists in Customizing for the Material Master under Define Structure of Data Screens for Each Screen Sequence.
2. Check whether screen 92 has been assigned to screen sequence SP and has the screen type 1 (main screen).
3. Check under Subscreens whether the subscreens were assigned to screen 92 of the screen sequence SP.
4. In the Assign Screen Sequences to User/ Material Type/Transaction/Industry Sector IMG activity, set up the users who are allowed to edit the screen sequence and when it appears.
also I have SAP_ALL Authorization.
Regards,
Amol Joshi

Hello Amol,
For IMG activity: Define Structure of Data Screens for Each Screen Sequence, for screen sequence 21, with logical screen 92, in subscreen, please see below settings:
Program: SAPLMGD1 , screen no. is 1002
Program: SAPLCBGL_LD00 , screen no. is 8020
Program: SAPLCBGL_LD01, screen no. is 1010
Regards,
Niraj

HT1338 I've updated my software but still get message "Some plugins used byu this page are out of date". What do I do next to cure this problem?

Does anyone know how to solve this problem?

Could be because recent versions of Firefox do not accept most plug-ins.
But for this there is a workaround:
Open Firefox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: firefox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close Firefox, open it again, and it now uses the plug-ins that Safari has stored.
As for Java, not many web sites use Jave and for security reasons you should turn of Java, but Javascript is another matter (and something completely different) and this should be left on.

Template - issue with validity area - check on multiple usages at once

Hi all
One customer requirement Iu2019m trying to solve, and I donu2019t find a solution, is the following:
<b>When we have two or more validity areas in the generation variant, we want to check on both at the same time in order to get the data on the SDS.</b>
<b>Is this possible or not and, in case it is possible, can someone explain me how to do this?</b>
Thanks in advance.
Two examples.
In the generation variant we have validity areas:
A.     REGION                SE
                     USE_CAT             IND
B.     REGION                NO
                     USE_CAT             IND
C.     REGION                NO
                     USE_CAT             FER
In the specification data of one VAT we have several instances. The usages added to these instances are:
1.     REGION                SE
                     USE_CAT             IND
2.     REGION                SE
                      USE_CAT             FER
3.     REGION                NO
                     USE_CAT             IND
When I use generation variant A, I only want to see instance 1 on the SDS.
When I use generation variant B, I only want to see instance 3 on the SDS.
When I use generation variant C, I donu2019t want to see any instances on the SDS.
I donu2019t find how to solve this.
When I donu2019t use a repeating group type G for validity area, using generation variant A, I get instances 1 and 2. Using generation variant B or C I get instance 3 on the SDS.
When I use a repeating group type G for validity area USE_CAT, using generation variant A or B, I get instances 1 and 3. Using generation variant C I get instance 2 on the SDS.
Similar with the exclude check put.
In the generation variant we have validity areas:
D.     REGION                SE
                     USE_CAT             IND
E.     REGION                NO
                       USE_CAT             FER
In the specification data of one VAT we have several instances. The usages added to these instances are:
4.     REGION                SE
                     USE_CAT             IND        excl
5.     REGION                REG_EU
                      REGION                SE           excl
                      USE_CAT             FER
6.     REGION                NO
                      USE_CAT             IND
When I use generation variant D, I donu2019t want to see an instance on the SDS.
When I use generation variant E, I donu2019t want to see an instance on the SDS
I donu2019t find how to solve this.
When I donu2019t use a repeating group G for validity area USE_CAT, using generation variant D, I get instance 4 on the SDS. Using generation variant E I gent instance 6 on the SDS.
When I use a repeating group G for validity area USE_CAT, using generation variant D, I get instance 6 on the SDS. Using generation variant E, I get instance 5 on the SDS.
Kind regards,
Luk

Hello Luk
You wrote: When I understand the documentation of the validity area's correct, options subset, superset, 1:1, ... always reflect to the relation of the entry in the generation variant and the usage that is maintained one on the data.
This is exactly how the link is done between data in EH&S and the data which show up in WWI document (please exclude the topic of G group at the moment; this is special). Therefore the validity area entered in GenVar is the "Leading" validity area.
Regarding you questions some "basic" work is needed. May be this help you to find new options to solve your issue:
SAP EH&S uses the "validity area type" and the "validity area". Common used are the validity types:
REGION
DGREGION
PLANT
It seems that you have created a new validity area type USE_CAT with validity areas wich you have defined by your own.
I will give you only an overview about the "normal" use of REGION. In this case the validity area is normally a 1:1 relation to a country (defintion is done via customizing). A "special" validity area is REG_WORLD (please refer to SAP docu). REG_WOLRD contains automatically (without further doing) all other validity areas of type REGION. Now it is always possible to generate new "fictive" validity areas. E.g. you Could define the validity area "NAFTA" which would have a link to the countries: US, MX etc. These validiyta areas can be used in data maintenance and in the GenVar as well.
As I have no knowlede how you have defined the USE_CAT" validity areas I can not provide you hints. But I would like to provide further hints in using the "Excl." Flag of usage of the VAT
Example: if you use Rating 1 in combination with REG_WORLD, DE excluded and the GenVar has the leading validity area DE this value is not used in WWI report. But if the genVar would have the leading validity area BE it would be used.
Please check really carefully the topic of "subset, superset, 1:1,.." because this is the "key" issue if or if not a VAT will show up in WWI.
Now back to your next question:
when on the data a validity area is excluded and the same validity area is present in the generation variant, data should not be displayed even when there is a positive match prasent as well. (e.g. positive match on region, negative match on use category).
Now as explained above: if in VAT level a validity area is excluded but the same validity area is used as leading Validity area in WWI report the value will not show up. The same should be true if you have used "G groups" with discrete validity areas
Next question:
when you defined the data as relevant for region EU and use category industrial, data should only be displayed when the generation variant contains both a region related to EU AND this industrial use.
Here I would need more information. The GenVar contains by default only one leading validity area. Therefore any further "logic" must be applied by using "G Group" in the template and now things get "worse" in some sense.
If I remember correct the following should be true:
If you have used properly the G Group with "Use_CAT" in your WWI document this should work:
You have defined the VAT as : Rating + DE + IND. Now in a special section of your WWI report you have used the G Group. By using this the value should be printed but not a parallel VAT value with Rating + DE + FER.
If you have used this logic in your whole template I really salute because the WWI template is in my opinion very complex to understand and the logic how to retrieve the data from EH&S into the WWI report is complex too and the length of the report should have increased by at least 20 % or something like that
Now you have mentioned a further option you are using:
"Currently we solve this by creating multiple characteristics (use category specific) and selecting only on validity area region based on the generation variant."
If I underdstood your explanation correct you have done the following:
If necessary you have entered a further characteristic in the Class called "use CAT" which must have values. Then using the "if else etc." logic of WWI you select only those VATs into the WWI report which does have the correct "Use Cat".
Once again:hard work which you have done. In my opinion you should go on with this approach. In doing so you have implemented an "and" logic. Only if the Value does have DE and the UseCat (in characteristic) Is e.g. FER the value will be printed.
It is complex yes but the "G Group" is much complexer
Natural solution of demands like this is using further ratings to select the data properly. It seems to be you have excluded this option.
With best regards
C.B.
Edited by: Christoph Bergemann on Sep 4, 2011 5:50 PM
Edited by: Christoph Bergemann on Sep 4, 2011 5:54 PM

How do I disable the "some plugins are out of date" message

I am running firefox 3.6.3 on a powerpc mac laptop. There are no more upgrades to either firefox or any of the plugins it is using. It's a powerpc and the current updates of the plugins all require an intel based mac. I constantly get the message "some plugins used by this page are out of date" message above the screen, or Firefox disables plugins because it says they are a security risk. I don't care. This is an old computer that would work fine if Firefox would just stop trying to upgrade either itself or its plugins, or try to warn me about something that can't be upgraded and that I don't care about. MAC rule number one: The user is in charge. How do I fix this annoying and PC like feature?
In the future if Firefox is going to continue to have this "feature" it should keep track of what kind of computer it is running on and what what updates can and can not run on the computer it is running on, or give the user the option of turning off not only the messages but the whole plugin update function.
Mac OX 10.5.8 running on a 1.5 GHZ Power PC G4

Quote: ''I'm not sure what you mean Address bar > Plugins ''
What is meant in to open the "Tools > Add-ons > Plugins" window (the about:addons page doesn't exist in Firefox 3.6.x)
You can inspect and modify some prefs on the about:config page to suppress the plugin reminder.
*set the plugins.hide_infobar_for_missing_plugin pref to true
*set the plugins.hide_infobar_for_outdated_plugin pref to true
*http://kb.mozillazine.org/about:config

Publishing MA to ERP: What validations are included with Use ERP Validation

If I select the "Use ERP Validation" checkbox in my integrated document type for Master Agreements, what is the list of validations that will be enforced? I would like to know this so that I know what additional custom validations I should add that are not included with the standard selected. The SAP Integration Guide does not give this level of detail. Thanks.

Hi,
Here are some hints:
@Header:
Some of the validations done here are related to filelds in the integration tab like transaction type, purchasing org, purchasing group, . The fields mandatory check & replicated flag check on this objects are checked..
in addition at the Contract document level other integrated objects like vendor, payment terms are also checked for replication flags.. The purchase org selected in integration tab should match one of vendor's purchase org.
@Item:
There is an array of validations again.. here the focus is the master data used in line items are checked for consistency:
1. If Plant is replicated, check that it is assigned to a company code. 2. All item plants must belong to the same Company Code and this must match the Company Code on the header. If Plant is not set, it is treated as valid. 3. If both Plant and P-org are ECC replicated, check that there exists a relationship.
Guess best way to go forward is to do some tests for your particular scenario and see if it is covered in standard. if not you can implement a custom validation in the prepublish script
Thanks, baski

Xml validation in File to RFC Sync Scenario with Validation fails message

Hi All,
We are using PI 7.4 (Dual Stack) the Requirement is File to RFC Sync Scenario(File <---> RFC).and need to do XML validation against XSD Schema. if any Validations fails Response message should send back to sender.RequestResponseBean standard module is using for File to RFC Sync scenario but how to send the response message to sender if any validation fails. adapter level XML validation is not helpful for this requirement. please help out me how to achieve the requirement with graphical mapping.
Thanks in advance.

to validate schema you cannot solve it with graphical mapping but validating the schema in the AAE or the integration engine.
y recomend you to use the AAE validation at sender side, coz the sender system will be notified in case of schema errors.
The response will be validated at Integration Server level.
you can search in the forum, you will get many document about how to configure it.
take a look to my blog: PI 7.3 - XML Validation

Using non-alphabetical symbols in Oracle Label Security API

I decide to use Oracle Label Security Release 9.0.1 , but I have some problems in realization . When I try to use function sa_policy_admin.apply_table_policy with
following parameters:
sa_policy_admin.apply_table_policy(
POLICY_NAME => 'policy1',
SCHEMA_NAME => 'domain1\user1',
TABLE_NAME => 'table1'
I receive messages :
ORA-00604: error occurred at recursive SQL level 1
ORA-00911: invalid character
ORA-00911: invalid character
ORA-06512: at "LBACSYS.LBAC_POLICY_ADMIN", line 251
ORA-06512: at line 2
Tell me please , may be there are any limitations on parameter SCHEMA_NAME in function ,
because this function can't understand symbol "\".
Note 1: It is obligatory to use symbol "\" in schema_name ,
because I have to connect to DB as external user (user of Windows 2000 Server).
Note 2: ORA-00911 invalid character
Cause: Special characters are valid only in certain places. If special characters other than $, _, and # are used in a name and the name is not enclosed in double quotation marks ("), this message will be issued. One exception to this rule is for database names; in this case, double quotes are stripped out and ignored.
Action: Remove the invalid character from the statement or encl[i]Long postings are being truncated to ~1 kB at this time.

Yes I have with 10gr3
It can be made to work but perhaps not in the way you want (per user?). Your label security will need to have policies based on something.
I did a proof of concept using Security Group column as the 'label'. Then applied VPD policies based on which network the request came from (1 DB rac node in each network).
In my case I wanted to show ALL content to a secure network but a subset of content to the lower security network. For this use case it is ideal.
It worked flawlessly...not supported though
Apparently OLS is on roadmap or UCM (WCC) so ask Oracle and see if you can find out if it is slated for any particular release yet.
Tim

Can i use the retention policy without using the Flash Recovery area?

Yes ,lets see here
RMAN>list backup summary
C:\>dir *.bus
Volume in drive C is khurram
Volume Serial Number is F49D-FF2B
Directory of C:\
File Not Found
C:\>dir *.arc
Volume in drive C is khurram
Volume Serial Number is F49D-FF2B
Directory of C:\
File Not Found
RMAN> crosscheck backup
2> ;
using channel ORA_DISK_1
RMAN> list backup summary
2> ;
RMAN> show retention policy
2> ;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
RMAN> run {
2>   allocate channel ch0 type disk;
3>   backup as compressed backupset database format
4>   'c:\rman_%s_%d_%T.bus'
5>   plus archivelog format 'c:\arch_%s_%d_%T.arc';
6>   release channel ch0;
7>   allocate channel ch1 device type disk format 'c:\arch_%s_%d_%T.arc';
8>   release channel ch1;
9>   delete force noprompt obsolete;
10>   allocate channel ch2 device type disk format 'c:\rman_%s_%d_%T.bus';
11>   release channel ch2;
12>   delete force noprompt obsolete;
13> }
released channel: ORA_DISK_1
allocated channel: ch0
channel ch0: sid=146 devtype=DISK
Starting backup at 15-APR-08
current log archived
channel ch0: starting compressed archive log backupset
channel ch0: specifying archive log(s) in backup set
input archive log thread=1 sequence=24 recid=79 stamp=652108461
input archive log thread=1 sequence=25 recid=80 stamp=652112650
channel ch0: starting piece 1 at 15-APR-08
channel ch0: finished piece 1 at 15-APR-08
piece handle=C:\ARCH_130_ORCL1_20080415.ARC comment=NONE
channel ch0: backup set complete, elapsed time: 00:00:05
Finished backup at 15-APR-08
Starting backup at 15-APR-08
channel ch0: starting compressed full datafile backupset
channel ch0: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\SYSTEM01.DB
F
input datafile fno=00003 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\SYSAUX01.DB
F
input datafile fno=00004 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\USERS01.DBF
input datafile fno=00002 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\UNDOTBS01.D
BF
channel ch0: starting piece 1 at 15-APR-08
channel ch0: finished piece 1 at 15-APR-08
piece handle=C:\RMAN_131_ORCL1_20080415.BUS comment=NONE
channel ch0: backup set complete, elapsed time: 00:00:45
Finished backup at 15-APR-08
Starting backup at 15-APR-08
current log archived
channel ch0: starting compressed archive log backupset
channel ch0: specifying archive log(s) in backup set
input archive log thread=1 sequence=26 recid=81 stamp=652112703
channel ch0: starting piece 1 at 15-APR-08
channel ch0: finished piece 1 at 15-APR-08
piece handle=C:\ARCH_132_ORCL1_20080415.ARC comment=NONE
channel ch0: backup set complete, elapsed time: 00:00:02
Finished backup at 15-APR-08
Starting Control File and SPFILE Autobackup at 15-APR-08
piece handle=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL1\AUTOBACKUP\2008_
04_15\O1_MF_S_652112718_408X3ZVJ_.BKP comment=NONE
Finished Control File and SPFILE Autobackup at 15-APR-08
released channel: ch0
allocated channel: ch1
channel ch1: sid=146 devtype=DISK
released channel: ch1
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=146 devtype=DISK
Deleting the following obsolete backups and copies:
Type                 Key    Completion Time    Filename/Handle
Backup Set           128    15-APR-08
Backup Piece       128    15-APR-08          C:\ARCH_130_ORCL1_20080415.ARC
Archive Log          79     15-APR-08          C:\ORACLE\PRODUCT\10.1.0\FLASH_RE
COVERY_AREA\ORCL1\ARCHIVELOG\2008_04_15\O1_MF_1_24_408RYXDF_.ARC
Archive Log          80     15-APR-08          C:\ORACLE\PRODUCT\10.1.0\FLASH_RE
COVERY_AREA\ORCL1\ARCHIVELOG\2008_04_15\O1_MF_1_25_408X1SCR_.ARC
deleted backup piece
backup piece handle=C:\ARCH_130_ORCL1_20080415.ARC recid=128 stamp=652112652
deleted archive log
archive log filename=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL1\ARCHIVEL
OG\2008_04_15\O1_MF_1_24_408RYXDF_.ARC recid=79 stamp=652108461
deleted archive log
archive log filename=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL1\ARCHIVEL
OG\2008_04_15\O1_MF_1_25_408X1SCR_.ARC recid=80 stamp=652112650
Deleted 3 objects
released channel: ORA_DISK_1
allocated channel: ch2
channel ch2: sid=146 devtype=DISK
released channel: ch2
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=146 devtype=DISK
no obsolete backups found
RMAN>
C:\>dir *.bus
Volume in drive C is khurram
Volume Serial Number is F49D-FF2B
Directory of C:\
04/15/2008 02:24 PM        96,813,056 RMAN_131_ORCL1_20080415.BUS
               1 File(s)     96,813,056 bytes
               0 Dir(s) 61,960,724,480 bytes free
C:\>dir *.arc
Volume in drive C is khurram
Volume Serial Number is F49D-FF2B
Directory of C:\
04/15/2008 02:25 PM            56,832 ARCH_132_ORCL1_20080415.ARC
               1 File(s)         56,832 bytes
               0 Dir(s) 61,960,724,480 bytes free
C:\>
RMAN> run {
2>   allocate channel ch0 type disk;
3>   backup as compressed backupset database format
4>   'c:\rman_%s_%d_%T.bus'
5>   plus archivelog format 'c:\arch_%s_%d_%T.arc';
6>   release channel ch0;
7> }
released channel: ORA_DISK_1
allocated channel: ch0
channel ch0: sid=146 devtype=DISK
Starting backup at 15-APR-08
current log archived
channel ch0: starting compressed archive log backupset
channel ch0: specifying archive log(s) in backup set
input archive log thread=1 sequence=26 recid=81 stamp=652112703
input archive log thread=1 sequence=27 recid=82 stamp=652112873
channel ch0: starting piece 1 at 15-APR-08
channel ch0: finished piece 1 at 15-APR-08
piece handle=C:\ARCH_134_ORCL1_20080415.ARC comment=NONE
channel ch0: backup set complete, elapsed time: 00:00:02
Finished backup at 15-APR-08
Starting backup at 15-APR-08
channel ch0: starting compressed full datafile backupset
channel ch0: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\SYSTEM01.DB
F
input datafile fno=00003 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\SYSAUX01.DB
F
input datafile fno=00004 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\USERS01.DBF
input datafile fno=00002 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\UNDOTBS01.D
BF
channel ch0: starting piece 1 at 15-APR-08
channel ch0: finished piece 1 at 15-APR-08
piece handle=C:\RMAN_135_ORCL1_20080415.BUS comment=NONE
channel ch0: backup set complete, elapsed time: 00:00:45
Finished backup at 15-APR-08
Starting backup at 15-APR-08
current log archived
channel ch0: starting compressed archive log backupset
channel ch0: specifying archive log(s) in backup set
input archive log thread=1 sequence=28 recid=83 stamp=652112925
channel ch0: starting piece 1 at 15-APR-08
channel ch0: finished piece 1 at 15-APR-08
piece handle=C:\ARCH_136_ORCL1_20080415.ARC comment=NONE
channel ch0: backup set complete, elapsed time: 00:00:02
Finished backup at 15-APR-08
Starting Control File and SPFILE Autobackup at 15-APR-08
piece handle=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL1\AUTOBACKUP\2008_
04_15\O1_MF_S_652112928_408XBKCZ_.BKP comment=NONE
Finished Control File and SPFILE Autobackup at 15-APR-08
released channel: ch0
RMAN> report obsolete
2> ;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 1
Report of obsolete backups and copies
Type                 Key    Completion Time    Filename/Handle
Backup Set           129    15-APR-08
Backup Piece       129    15-APR-08          C:\RMAN_131_ORCL1_20080415.BUS
Backup Set           130    15-APR-08
Backup Piece       130    15-APR-08          C:\ARCH_132_ORCL1_20080415.ARC
Backup Set           131    15-APR-08
Backup Piece       131    15-APR-08          C:\ORACLE\PRODUCT\10.1.0\FLASH_RE
COVERY_AREA\ORCL1\AUTOBACKUP\2008_04_15\O1_MF_S_652112718_408X3ZVJ_.BKP
Backup Set           132    15-APR-08
Backup Piece       132    15-APR-08          C:\ARCH_134_ORCL1_20080415.ARC
Archive Log          81     15-APR-08          C:\ORACLE\PRODUCT\10.1.0\FLASH_RE
COVERY_AREA\ORCL1\ARCHIVELOG\2008_04_15\O1_MF_1_26_408X3HRP_.ARC
Archive Log          82     15-APR-08          C:\ORACLE\PRODUCT\10.1.0\FLASH_RE
COVERY_AREA\ORCL1\ARCHIVELOG\2008_04_15\O1_MF_1_27_408X8RXN_.ARC
RMAN>Note: i have archivelog which is at FRA ,it also apply there and as well yours own defined backupsets path.
Yours comments are wellcome.
http://oraware.blogspot.com/2008/04/can-i-use-retention-policy-without.htmlKhurram

Hmmm, I can't see where the confusion originates. The table near the bottom of www.apple.com/timecapsule/specs.html has one row labelled "For backup using Time Machine" and another row labelled "For AirPort Disk with a USB hard drive".
The requirement for backup via Time Machine is OS 10.5.1 or better. Time Machine is not supported in pre-Leopard (OS 10.5) nor in Windows.
The requirement for using Time Capsule as a remote disk is identified as "Mac with Mac OS X v10.4.8 or later" or "PC with Windows XP (SP2) or Windows Vista; Bonjour for Windows (included on Time Capsule CD)".
Doesn't that pretty much spell out that Time Capsule works as a network drive without the need for Time Machine?
Also Joe (the OP) never indicated any desire to use it with Windows so I'm not sure why all the discussion about Windows compatibility. ??
Also the quote posted by Henry seems pretty clear:
"Time Capsule with Time Machine in Leopard is the ideal backup solution. But that doesn’t mean Tiger, Windows XP, and Windows Vista users can’t enjoy the benefits of Time Capsule, too. Because it mounts as a wireless hard drive, Tiger and Windows users simply access Time Capsule directly from the wireless network for exchanging and storing files quickly and easily."

How to validate multiple controls using a single Validator?

I am trying to do an HourValidator because Flex doesn't have
this, so i am extending from the Validator class. I read in the
Creating and extending Flex components document the
following:
"A validator can validate more than one field at a time. For
example, you could create a custom
validator called NameValidator to validate three input
controls that represent a person’s first,
middle, and last names.
To create a validator that examines multiple fields, you can
either define properties on the
validator that let you specify the multiple input fields, as
does the Flex DateValidator class
class, or you can require that the single item passed to the
validator includes all of the fields to
be validated."
So according to the document i need to define properties so i
defined 4 properties:
startHourSource: the input control containing the starting
hour
startHourProperty: the control's property (in this case the
text property)
endHourSource: the input control containing the end hour
endHourProperty: the control's property (in this case the
text property)
The thing is that when i call the doValidation of the
superclass (to validate the required property) it does return a
validation error but it doesn't mark the input control with the red
frame that indicates there's a validation error. I assume that is
because the
source and
property properties of the validator are null but that's ok
because i am not using them, instead i am using the 4 properites
mentioned above.
So what do i need to do or override so the red frame appears
in the input controls??

Yeah i already know that, but when you use the doValidation
method, which does the requiredField validation, by default marks
the input control with the red frame, so that's why i am trying to
do, doing it so it will do it by default.
For example, try this:
<mx:TextInput id="test"/>
<mx:Validator id="validateTest" source="{test}"
property="text" required="true" requiredFieldError="The field is
empty"/>
If you do
validateTest.validate( ) and the textinput is empty, it will
mark it with the red frame by default, that's the kind of behave i
want for my HourValidator, but if it is not possible then the
solution you suggested would be the only one to do this.

I have several albums in a folder in iphoto. The pictures are ordered, labeled, and dated. I want to put them on an external hard drive and have them stay in order w/labels. How can I do that? Thank You

I have several "albums" in a "folder "in iphoto. The pictures, and videos (from a camera and smart phone) are ordered, labeled, and dated. I want to put them on an external harddrive. How can I do that and keep them in order, etc. What I have tried reorders them, separates them into the camera pictures, phone pictures, and movies. We are not sauvy in Apple or iphoto so this has been extremely frustrating for us.

Files on disk have no order - they are given the order by the viewing program - finder on the Mac - using the finder you can view files by many different sorts - file name - date created - date moified - size - etc
Deciede how you are going to sort them when you view them and then export them so that sort works for you
Generally using an alpha sort to view and exporting using the sequential nameing option is the solution - see the user tip on exporting for the options available
LN

Problem in using LOV for validation-JHS 10.1.3

Hi all,
This problem was also noticed by Phil McDermott (Problem in using LOV for validation-JHS 10.1.3
I am following the demo and I noticed that the Use LOV for Validation functionality does not work on the browse page. However, it does work on the details page!
Another effect of this problem is that once you tried to validate on the browse screen, the lov button does not work anymore.
Thanks, Joep
Just found out that is does not work when entering "ph" like suggested in the tutorial. When I enter "p" and then tab to the next field, the lov popup does show.
Message was edited by:
Joep Hendrix

Thanks for your reply Steven.
I had the same problem as Joep reported here, following the steps at:
http://www.oracle.com/technology/products/jdev/tips/muench/jhstutorial/index.html#genandrunagain
Your solution works for me.
The "completed version of the tutorial application" also has this issue:
http://otn.oracle.com/products/jdev/tips/muench/jhstutorial/MyDemo.zip
Are there any other known issues for this tutorial? Where can I find such errata list?
many thanks
Jan Vervecken

GLM: use scenario as validity area in label data view

Similar Messages

Maybe you are looking for