Global calculated key figures and their descriptions

Hi, I currently have a strange problem concerning calculated key figures.
We have several global calculated key figures which are used in approx. 100 querys. These key figures have a custom description ( not the same as the underlying keyfig info object).
When we use the calc. key figures in querys we let them take the description from the global key figure (the box 'use Standard text' is checked). When we execute the query, the description of the calculated does not show. As soon as we uncheck the box 'use Standard text' (and thus use 'local' -query level- descriptions) the description does show. Offcourse this is not a solution but merely a workaround, we want the key fig to take its description from the global key figure.
The problem as described above only occures on one of the two development environments. The environment on which the problem occures has support package skw70018(nwv st 16), the environment on which the problem <u>doesn't</u> occure has support package skw70013.

Execute the content at Infoprovider level as below
Div Team A B C
A X 2 1 6 9
A Y 4 2 9 15
Result Row 6 3 15
If you get same desired result in Infoprovider .. it should come in Report ... Run the report in RSRT (Without cache)
How you built the MP based on single cube or 2 ? Display content in MP for above critieria ... to cross check the report
check the idenfication ... is marked to which cube ?

Similar Messages

Diff between Calculated key figure and new formula 6extra functions why

Hi Friends
In BEx query designer we have Restricted key figure & Calculated key figure. In the case of Ristricted Key figure And new selection the difference is Global and local.
But if we come to Calculated Key figure and New Formula the difference is same global and local. But in New formula we have 6 extra function. My question is does is there any certain reason for this or SAP AG not be able to develop those functions
Thganks & Regards
Bramhanand

Hi Surendra thank you for your reply.
But i am not asking difference between calculated key figure and New formula.
What i am asking is in the case of Restricted Key figure And new selection the difference is Global and local.
But in Calculated Key figure and New Formula the difference is same global and local and in New formula we have 6 extra function. My question is does is there any certain reason for this.Why not SAP AG is not included the new formula functions in Calculated key figure.
Thanks & Regards
Bramhanand

Selection on Global Calculated Key Figure problem

Hi all,
I've got a Calculated key figure, made up of 2 key figures and 2 restricted key figures, saved to a homogenous multiprovider (Customer Sales). this works fine as is.
However, when you create a selection in BEx QD, that limits the CKF further by Distribution channel, and view the result, the result seems to be multiplied by a value to the effect of 2.8???
If you view the CKF by itself its fine (though not limited to what it needs to be).
As an example.
Say sales for a distribution channel was 1 million dollars. Sales overall was 2 million dollars. If i drag in my CKF (and have NO characteristics), it comes up with 2 million dollars.
If i limit it to 1 sales office, no issues, I get that sales office's value. However, if i limit it to a distribution channel, i get roughly 2.8 million dollars.
Any ideas? I can't see the logic in this. Perhaps someone knows of the issue/has seen a note or something regarding this, cos its got me scratchin my head?
Cheers

Hi Pierre,
I appreciate the fast reply. This thing is driving me nuts!
Ok so when you refer to the CKF are you referring to the global CKF on the multiprovider or the CKF i have on the report that is restricted (basically a local RKF)?
I've had a look through there and have found the calculation tab, but can't really say i've found "Calculate according to current formula".
What i see are:
a dropdown list headed "calculate results as..." (nothing defined)
another dropdown list called "calculate Single Values as..." (nothing defined)
a tick box called cumulated (unticked)
another tickbox called "also apply to results" (unticked)
another dropdown listbox called "calculation direction" (default setting)
Underneath all that is a tickbox called "use precalculated value" (unticked).
is it something under all that that i need to change?
Do i change the global CKF or the local RKF?
Thanks for the assist.

COPA calculated key figures and scheme on R/3 side

We have created calculated key figures on the R/3 side and inputted formula (which is essentially the scheme/basic formula in transaction KER1) for this key figure. We then checked off this key figure in the COPA datasource. These key figures are only adding and subtracting certain elements for a particular record. In RSA3 on the R/3 side, this key figure is calculated correctly. In BW, in the PSA, it's calculated correctly. The problem is when it goes to the ODS. It gets no values. All 0's.
Does anyone have any ideas? It's straight forward mapping and I'm thinking it's a bug, but wanted to check if there was anyone that had this problem before and some "hidden" config had to be done.
Thanks, Mark.

Anyone have any ideas?

Restricted & Calculated Key figures and Structures

Hello Gurus,
I'm using a BW Query to create my universe and all I see is a class called Key Figures and few objects. I don't see my restricted and Calculated Key figures.
Also I want to understand how are the Structures in BW Query brought into Universe? All I see is a column class and row class with corresponding objects in it.
Environment: BO XI 3.1
Appreciate your help.
Regards,
Vijay
Edited by: vijay dwivedula on Jun 12, 2009 7:46 PM

Hi Ingo,
Sorry for getting back a little late on this issue. I've been trying to fix other issues. I'm creating my report out of BW Query and I'm not able to see all the Restricted Key Figures. Also when I try to create my report out of existing key figures and verify the data with BW analyzer the data seems to be different.
What happens is in my universe I've two classes naming Rows_xyz, Column_abc etc and there are like 25 objects in Rows_xyz when there are supposed to be like 60 key figures and in Column class I have a single object. When I pull in this coulmn obect and pull like 3-4 key figures (which I made sure have data from BW Query Analyzer) doesn't return any data. It doesn't even throw an error as No data to fetch.
I took the MDX Query that is generated by this report and ran it on the backend and see that there is no data even there. But from the BW Query Analyzer I can see data for this Column and the key figures that I pulled in the report.
Thank you for your help
Vijay

Calculated Key figure and formula variable issue - Urgent

Hi,
I have created a formula variable on dates. When I run this locally it returns results. Now I have created a calculated key figure on this formula variable. It is not returning any results. Any idea on why this is happening.
Thanks,
Kal

Hi Kal,
Can you paste your Formula & Calculated Keyfigure calculation.
If possible give information on ur formula variable ( processing by , charactesristic , replace variable with ( if it is replacement path ) , Dimension id )
Regards,
SRIKANTH

Error When creating a new Global Calculated Key Figure or RKF

Hi,
Coming across this problem with NW2004s BI 7 query designer. When i create a new CKF or RKF with the query designer, i get a error message.
Currently the SAP GUI is on SP 8 and the problem exists after applying the collective note recently released.
Rgds
Dinesh
Message was edited by: Dinesh Mukundu

Also, make sure you've got all your frontend patches configured correctly as outlined here:
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation

Problem with Calculated Key Figure and Acumulated

Dear Masters,
I am trying to use cumulated KF in a query. No problem with results. I just flag 'Cumulated'. However I need to use the value of each line in an operation. Let me illustrate it:
Cumulated KF    KF1      FINALKF
2                         2             2/2=1
3 (2+1)                1              1/1=1
5 (3+2)                 4             4/2=2
6 (5+1)                 2             2/5=0.4
As you can see above instead divide the KF1 by Cumulated value of a Line, the final result is always KF1/the value that would be the add value. The first line always is right because for the line 1 cumulated value has no accumulation value.
Any idea?
Regards,
GilsonTeixeira

Any idea?

Calculated Key Figures vs. Formulas

Hello all,
Can someone explain in a few words what's the difference between a Calculated Key Figure and a Formula? We know the CKF's are global to all the queries and the formulas aren't. But how can we decide when to use ones or the others?
Many thanks,
Inma

Hi Inma,
As you correctly mentioned, the CKFs are Global, which means that they can be used in different queries built on the same InfoProvider. Formulas cannot be directly reused, but if they are saved to a global structure, then the structure may be reused. If you are creating a calculation that will be widely used, it is best to create it as global...this helps a lot when you need to revisit the definition, and make changes as one chnage is reflected in all queries.
However, there are some functions like SUMCT, SUMGT, SUMRT, %CT, %GT, %RT which are available only to the formulas (local), so if you need to use them, you cannot use a CKF.
Hope this helps...

Using the function SUM() in a calculated Key Figure

Hi All,
I need to create a calculated Key Figure and am looking for the function SUM().Can you please let me know where this is present.I have checked under the "Data Functions" and it does not seem to be present there.
Thanks
Aravind Pattabiraman

Hi,
Make use of aggragation property of the keyfigure, for summing the values of that KF.
Regards,
Rajkandula

Calculated Key Figures question

Hi
In a Purchase Order report I have included a Calculated Key Figures and this report is transported to the QA environment.
Then I create another report using the same Calculated Key Figures but when I tried to save the query it gives me an error;
"The query could not be saved due to a problem in transport"
"BEx transport request 'BD1K900664' is not suitable or not available".
I was told that when the 1st report uses that Calculated Key Figures and the report transported over to the QA I cannot reuse the same Calculated Key Figures in the new report. Is this true in SAP BI? If so how can I reuse the same Calculated Key Figures in a new report.

Hello Lai,
Once you have transported the earlier report along with the original calculated key figure, create one more request by selecting just the cal. key figure which you want to use.
dont release this request.
Now any change you make in the cal. key figure will be stored in this newly created request.
also go ahead and create a new query using this ckf and save it in the newly created request.
Then you can always release this and transport the same.
hope this helps..
let me know for any further issues...
thanks,

Calculated Key Figures Issue!

Hello Experts -
I'm getting error messages for the calculated key figures. The message says that the key figure is not defined correctly. Therefore, I started breaking down the calculated key figures and use them in the eventual calculated key figure. I have included all the calculated key figures. And I've hidden the ones that I dont need to show in my query result. I'm in BI 7.0. Also, I had to remodel my multi-provider after making the initial query. Do I have to start fresh?
I have the following calculated key figure:
1. Price = (Price > 0) * Price + (Vendor Price - (Vendor Price * (Cust Discount + Vendor Discount)))
This is supposed to be an if calculation. If Price is greater than 0, then Price else the calculation.
Cust Discount and Vendor Discount are CKFs.
What am I doing wrong?

Thanks Ajay!
I added a couple of NODIMs and the query is now working!
I have couple more questions:
1. Is there a way to say Not Null in Bex? In my if condition, I want to say if Price is not equal to NULL instead of greater than 0.
2. The above requirement leads me to another question: how do I account for the negative values. I mean I need to add them but I cannot suppress them? I hope it makes sense!

Calculated key figures, results and grouping!!

Hi,
I'm working on a workbook with several sheets, the first of them contains the detail and also several result lines (Discipline, material group and material), the second one has a resume (Discipline and material group), etc.
In the first and second sheet I have a calculated key figure, but the result has a problem because I don't want to formulate it on the result, instead I need the summarization (total of amounts by material), this problem is already solved by changing the calculate result as summation. But now I'm facing a new problem, when I try to see the resume report (2nd sheet) by material group I don't need the Calculated Key Figure, what I need are the summation and total result showed on the first sheet.
One option I've been thinking of is to show the query on the first screen and hide the detail lines and just show the result and the summation lines; is this option ok? Do you have any other ideas?..
Thank you very much for all the help you can bring me,
Waiting for yours answers!!

Hi,
The best way to show only the summation by refering through cells. I mean the second option would be best.
Message was edited by: AVR - IGA

Currency Translation on Calculated Key Figure in BW7.0

I am trying to use a currency translation in BW7.0 on a calculated key figure. Unfortunately the options for this are greyed out in the conversions tab for the calculated key figure.
I took a simple example. I have a KF that is revenue. I put this KF in the query and I can specify the conversion for it.
I then took the same KF and put it as the only argument for a CKF. For this CKF whether it is local to the query or a global CKF, I cannot specify a currency conversion.
If I do the same experiment in the 3.5 design tool, I am able to specify the currency translation.
Is there some system setting that enables it in the 7.0 query designer?
Thanks.
KB

Hi,
Have a look at the links:
http://help.sap.com/saphelp_nw70/helpdata/en/80/1a682de07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f1/0a5529e09411d2acb90000e829fbfe/frameset.htm
Best Regards,
Rajani

Calculated key figures Vs local formula

HI,
I am having 4 queries on a cube.
i am now using calculated key figures instead of local formulae.
I want to know "which is better in performance wise/ or may be pros and cons of using each one."
Can any one clarify me.
I know that
1.when we select the option Calculation after aggregation will improve performance.
2.we can do some more things only with Cal. Key Figs using formula variable.
Here my concern is not that.
I am concerned about general case like -
i have to add, multiply or divide some direct key figures and use some data functions like nodim, NDIV0 functions.
Thanks in advance.
Regards,
Raghu

Hi Raghu,
Formulas cannot be directly reused, but if they are saved to a global structure, then the structure may be reused. If you are creating a calculation that will be widely used, it is best to create it as global...this helps a lot when you need to revisit the definition, and make changes as one chnage is reflected in all queries.
However, there are some functions like SUMCT, SUMGT, SUMRT, %CT, %GT, %RT which are available only to the formulas (local), so if you need to use them, you cannot use a CKF.
In addition to the differences, A formula can only work on other formulas/selections already in your query (in the same structure as your new formula), while a calculated key figure can only work on other key figures, calculated key figures or restricted key figures. However both can use formula variables.
CKF are calculated at the time of loading data.
Your Formula calculates at the time of running the query.
Hope this helps...
Regards,
Yokesh.

Global calculated key figures and their descriptions

Similar Messages

Maybe you are looking for