Global conversion ruleError while activation(Buss Content) of Trasfer rules

Hi All,
While activation of Buss Cotent transfer rules I am facing the problem [Errors with the global conversion rule for the field 0UNLOAD_PT,0DOC_CATEGR and 0PRVDOC_CTG]* for the following data sources 2LIS_12_VCITM, 2LIS_12_VCHDR,2LIS_11_VAHDR and 2LIS_11_VAITM.
Request you post your valuable suggestions to resolve this issue.
Regards
Mohan
Edited by: Rammohnaraju Y on Jun 27, 2010 9:08 AM

Hi Aniket,
You get this exception as there is mismatch in type of below variables
· p_global_key [type: C = 60]
· l_global_key [type: RSGN_GLOB_ID]
If we refer to RSGN_GLOB_ID, its structure and if we combine length of all fields of this structure is 90. Hence you get the exepction while assignment of values.
As this error is specific to case and you get through standard program thus better approach would be to contact SAP in that case.
Regards,
Dinesh Tiwari

Similar Messages

Can we get Transformation rules while activating Business content

Hi Gurus,
I am trying to install business content for the cube 0SD_C05 in BI 7.0. I have selected in dataflow before and afterwards, but I am getting that as Bw 3.X flow like update rules and tranfer rules. Is there any option that I can get the business content installed in BI 7.0 flow, like I need the transformation rules and all.Please advise.
Kind Regards,
Raghu

Hi,
While activating the BI content it will ask for the Datasource type to be extracted.There you need to specify in 7.0
Now as you have extracted,you can migrate the same.
Go the datasource>rt clk>migrate>with export>after migration>replicate the DS>activate and create transfor mation...
Hope this helps
Cheers,
Shana

Error while activating BI Content infocube - 0IMFA_1(IM: Assigned Plan Bud)

Dear All,
While I am trying to activate the Business Content cube 0IMFA_1(IM: Assigned Plan Budget (Operative) ) with Collection Mode 'Automatic' and Grouping ' In dataflow bef and afterwords', I am getting the following error -
" Object 0IMPLAN (Currency Translation Type,CTRT) could not be collected for object 1308CQ25VCD0H9UCVDTKXM7BB (Query,ELEM)
Message no. RSO296
Diagnosis
You have collected objects in the BI Metadata Repository. Associated objects for object 1308CQ25VCD0H9UCVDTKXM7BB of type Query,ELEM have also been collected. Object 0IMPLAN of type Currency Translation Type,CTRT was among these objects.
However, this object 0IMPLAN of type Currency Translation Type,CTRT is not available in the metadata repository.
System Response
Object 0IMPLAN of type Currency Translation Type,CTRT is ignored in further collections. The links for object 1308CQ25VCD0H9UCVDTKXM7BB of type Query,ELEM are incomplete. This may result in you not being able to activate this object.
Procedure
If this error occurs while you are installing BI Content, an error may have occurred during the delivery. Inform SAP. In all other cases, check that the object has not been deleted by another user during collection, for example. "
I am unable even to find this object.
Kindly let me know how to solve this issue.
Many Thanks in Advance,
With Warm Regards,
Vineeth

The log says, infoobject 0IMPLAN is not available in Metadata repository.
To make sure, RSA1--> BI Content --> Object types --> under InfoObject (middle window), double click 'Select Objects' and search for infoobject '0IMPLAN'. (in ur system its not available).
What u have to do is:
Either collect object by selecting Grouping ' In dataflow before' , so that u can insatll all backend objects and do the data loads.
Then, install frontend object,by selecting Grouping ' In dataflow afterwords'
OR
Since u have selected Grouping ' In dataflow bef and afterwords'...
After the collection is over, from right most window, select 'Query elements' --> right click --> Donot install any below
Do the same for BEx web template, Web Items, Querey Views, workbooks etc

Error while activating Business Content

Hi!
I'm trying to activating a BC ODS.. but when I run the installation simulation I get the following error message:
"InfoObject 0KN_USE is not available in version A"
I've marked the infoobject 0KN_USE to be installed..
Any ideas of how to proceed?
BR
Bjørn

Maybe that infoobject existed before in inactive version, check it and activate manually, after that activate business content version

Problem while activating BI contents

Hi Experts,
I am trying to activate BI contents, when i select "Install In Background" option system shows succesful scheduling of job but when i see the scheduled job from transaction SM37 system shows released status & under "Delay Seconds" by which job is delayed but shows 0 seconds under "Duration Sec."
Collection mode : Collect Automatically
Grouping : Dataflow Before & Aftrwds
Please Help in this regard
Thanks & Regards
Sushant

Hi,
Select the job in SM37, from the job option in the menu, select "Change". In the new screen that comes up, click on the Start option button and select, the Immediate button, click on the save button below. Save the job, the job will now become active.
Cheers
Neeraj

Error while Activating Tech Content in SPRO

Hi All, I am trying to install Tech Content & Admin Cockpit. I am following the recommended steps(OSS 934848). When I run the RSTCC_ACTIVATE_ADMIN_COCKPIT, it errors out & gives following message:
E:RS:062 0TCTBWOBJCT_TEXT BWU-010 A
We are on SP12 & BI content 7.03 sp5.
kindly help!
Regards
PK

Hi,
Try to simulate the program in SPRO before executing.
First Try out in the given order, one by one
1. Activate SAPI Data source
2. Replicate data sources only
3. Replicate data sources along with repair missing Info packages.
4. activate techinical content.
Try this activities in simulation mode.
if u find any errors like data source is not available or inconstancies in infopackages etc
U need to delete the inconsistant objects manually or u can also manually install some of data sources which throws error messages.
Go through the note 1074229, 1039381
Regards,
Srinivas.

Error in global conversion rule for InfoObject when Activating 2LIS_11_V_IT

Hello,
I am facing several issues while activating the Content. For 2LIS_11_V_ITM I get the following message:
Error in global conversion rule for InfoObject 0INCOTERMS2
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0INCOTERMS2.
System Response
The function module delivers the following error message:
Incorrect statament: Expression missing Operand mi
Procedure
Check the definition of the global conversion rule for an InfoObject.
Any suggestion?
thanks,

Hi Mohan,
seems this message is common when activating BI_CONT.
I believe what i did was:
- go to the InfoObject
- verified Object Routine (check) (then was ok).
- Removed Object form DS
- Activated DS (w/o info object was giving problems)
- Placed InfoObject back to the DS
- Activated DS but now including Info Object
Believe that worked for me.
Let me know how it goes.

Error while activating PM Business Content DSO 0PM_DS01

I am trying to activate the Business Content for PM (Plant Maintenance). I wasable to activate the cubes without any problem.
But when I tried activating the DSO 0PM_DS01, the installation is failing while activating the DSO with the message. "You are not authorised for Infosource 80PM_DS01"
Has anybody else also faced a similar error?
TIA
Abhishek

Hi,
Please stop posting multiple threads for the same post :
Unable to activate the DSO in PM Business Content
Suggest you close out one thread and just keep one active.
Cheers,
Kedar

Error in transfer structure while activating the business content

Hi all
we got the following error while activating the transfer rules( business content) :
1)error when determining a number from object BI_TSDTEL and number 01
2) object name can only contain characters from syntactical character set.
3) data element for infoobject WAERS 0CURRENCY could not be created.
can anyone please explain what is this error.

Hello Tilak,
Goto SE37 -> RSAR_TRANSTRUCTURE_ACTIVATE -> Transfer Structure Name -> Execute
If the above doesn't fix then try the below
Goto SE14 -> Transfer Structure Name -> Adjust and activate .
This will fix if there is any inconsistency in the transfer structure.
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/]

ERROR while activating the Business Content of Sales Cube 0SD_C03

Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

Error while Activating Activate Global Funds Management Functions (PSM-FM)

Hi,
I am getting the below error while activating Activate Global Funds Management Functions (PSM-FM) in Funds Management.
Aktivierung des Haushaltsmanagements ist nicht erlaubt
Message no. ZZ003
Kindly help me in fix this issue....
Thanks
Kishore

Hi,
Thanks for your reply. But can you clarify me why we need to delete the row Z_LEAVE in SE11 for FMISPS table. Because here ABAPER is objecting to do this as they feel there may be some impact if we delete this.
Kindly clarify me
Thanks
Kishore

Error while activating standard business contents e.g : 0SD_C11, 0SD_C12

Hi Friends,
I am getting this error while activating the Cube ,I'm not able to see update rules after activated in the Modelling.. My using 7.o but working on 3.x version, with support package 15.
When i stimuldate following are the errors:
80BP_ID not maintained
Data source 0DBDUNS_IMPORT_ATTR not maintained
Error while reading InfoProvider 0SD_O01 etc...
Please help me out from this error since two days i'm tryhing to resolve but i'm not able to activate...

Hello,
Go to business content, select the Infoprovider which you intend to install, select the before after option. Then say install & ignore the warnings & say yes. If still you are not able to view the update & transfer rules there might be some issues in the source system.
1] Check in rsa 6 that the datasources feeding to your cube are avialable or not.
2] Check the same is been replicated in BW or not.
3] The time stamp from both source system & BW system should match, otherwise replicate it again.
Hope this helps.
Regards,
Atul...

DSO Activation Error - While Installing BI Content

HI Friend,
    First, I deleted one sap source systems for BW1 ( My bw1 server BI is : BW1CLNT100 ), later ,I create the same sap source system, But active 0FIAP_O03 ods,
had error:
DataSource 80FIAP_O03 does not exist in source system BW1CLNT100 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIAP_O03
I go to BW1CLNT100 datasoucres ,I not finded 80FIAP_O03 datasoucre, But I goto bw prd BI datasoucre, I found   80FIAP_O03 datasoucre.
I think loss 80FIAP_O03 datasoucre for BW1CLNT100 source system, because I am't delete Roules on the 0FIAP_O03 infosoucre for delete sap soucre systems.
DSO Activation Error - While Installing BI Content
this problem no issue, So I create new thread.
Now, How could me create or load 80FIAP_O03 datasoucre for BW1CLNT100 source system?
Now, I Replicate Datascoure for BW1CLNT100 source system, Delete old datasocure....... I go home, I will try tomorrow .

Hello,
You should generate the export data source for 0FIAP_O03 again, if there is still a problem please goto
RSA1 > SOURCE SYSTEMS > and right click on the relevant source system, find the datamart application component and
right click on this to replicate the datasource.
Best Regards,
Des

Error in global conversion rule for InfoObject 0PERSLANGU when activating

Dear Experts
We are working on HR in BI7.0 with Ehp1.
I am trying to Activate the Transfer Rules of 0HR_PA_PA_1 DataSource which has the BID (BW Development) as the Source System to itself in order to load 0PAPA_C02 (Headcount) InfoCube.
When trying to Activate, it gives the following error message:
Error in global conversion rule for InfoObject 0PERSLANGU
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0PERSLANGU.
System Response
The function module delivers the following error message:
Incorrect statament: Expression missing Operand mi
Procedure
Check the definition of the global conversion rule for an InfoObject.
In fact, we are Re-implementing 3.0b BW System in new BI7.0 Ehp1 System. I have checked the Config of InfoObject 0PERSLANGU to the one available in existing BWP (3.0b Production) system and it's all the same.
Has anyone come across similar error message and how did you resolve. Any help is very much appreciated.
Many Thanks,
Chandu

HI Chandu ,
It is a bug in the system , can you take a look at the SAP note
Note 1070702 - RSAR 263: Error in global conversion rule for InfoObject
Hope it helps ,
Regards,'
Sathya

Error getting while activating Write Optimzed DSO

Hi Exerts,
I am getting the below error whil i am activation Write Oprtimized DSO
Error in global conversion rule for InfoObject ZGSOURSYS
ZGSOURSYS--- this is compunding attr of all my char.
Thanks in advance

Goto RDS1 -->check if the ZGSOURSYS object active or not?
Check if there are any transfer routine or conversion routine. if there is no routine
just add some line of code in the transfer routine and save it.
delete the added line of code and again save the transfer routine. activate the infoobject.
just saving the transfer routine and activating the infoobject should also help.
Re: Errors with the global conversion rule for the field 0SOURSYSTEM.

Global conversion ruleError while activation(Buss Content) of Trasfer rules

Similar Messages

Maybe you are looking for