Global Correlation and Network Participation - what's the value of it ???
Hi security gurus!
Can someone please shed me more light on the value of Global Correlation and Network Participation available at IPS 7.x
We've enabled it on the clients IPS appliances and now the only information I see is some cryptic reports seen at IDM gadgets.
It says that the reputation filtering is 100% under Percentage of malicious packets indentified. So what ?
How would I know exactly what those packets are and where did they come from?
Other metrics are Global Correlation inspection and Traditional IPS Detection techniques are 0%
What does it mean? Doesn't something work ? Why are they 0% ?
How is this normally sold to the customer if there's no credible information about it?
Eugene
Hi,
I think this link will help you http://docs.oracle.com/cd/B14117_01/network.101/b10776/listener.htm
Similar Messages
-
I have a airport time capsule, an older airport extreme, and an older airport express. I want to hard wire my Mac Mini to the network. What is the best arrangement of the devices? which ones should be hard wired to optimize extending the network?
I am using TM Unifi with an ASUS RT-N18U Wi-Fi router. I would like to know could I use Apple AirPort Time Capsule to extend (repeater, booster) my Wi-Fi to a part of the house where the Wi-Fi signal is poor
Yes,, if you plan to connect the AirPort Time Capsule to the ASUS router using an Ethernet cable connection that will remain fixed and permanently installed at all times.
No, if you were planning to have the AirPort Time Capsule connect wirelessly and extend the Asus WiFi signal, since it would not be compatible with another manufacturer's router for that purpose.
Another way of saying the same thing here would be that if you want to extend the network wirelessly, it will take two Apple routers to do so -
I have two wireless networks that I switch back and forth. Everytime I switch the network zone my macbook pro hangs and I have to do a hard shutdown and restart. What is the fix?
Create two locations in Network, one for one and one for the other.
WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots -
I lose connection with network (router: Airport Extreme, latest firmware) whenever MacBook Pro put to sleep. Have to use diagnostics to reconnect. Tells me network configurations have changed, then reconnects me to network. What is the fix?
Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > AirPort > Advanced > AirPort tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > AirPort > Advanced > AirPort tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.) -
When I turn on my iPad 1it stops the network connection to my windows xp pro computer. Ican fix the network connection by repairing the windows machine network. What is the reason this is happening?windows
Are you using DHCP to allocate IP addresses via your router or Static IP allocation?
You may have an IP conflict in your network.
Check on your various network configuration parameters in your iPad, PC and WiFi router. -
I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.
Ya know what I'm on a brand new MBP just about 24 hours old and you know whats been working amazingly for me. I have a 27inch iMac as well and i've just connected it to my network and been dragging files and apps across the network onto my new MBP. Its really working fast and its flawless. You could always do that option, Just go into sharing options and turn them on for both Macs. Then just click and drag. Of course they have to both be on the same network for this to be possible.
Look at my network.
Shared is what your looking at. I click on there see all my computers files and then drag the ones i want form its folder to my MBP folders. Hope that helps if your looking for a very simple way on a wireless network. -
IMessage will not work at home on my network. What is the port number?
IMessage will not work at home on my network. What is the port number?
iOS: Troubleshooting Messages
iOS: Troubleshooting FaceTime and iMessage activation
FaceTime, Game Center, Messages: Troubleshooting sign in issues
Make sure that Time Zone is also correct. -
I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was? I want to make sure I will still have various important files on my new computer, like my songs in iTunes, my photos in iPhoto, etc, etc. Thanks so much in advance!
Welcome to the Apple Support Communities
When you turn on the new iMac for the first time, Setup Assistant will ask you to restore a backup, so connect the external disk and follow steps to restore all your files to your new iMac. Your new Mac will have the same settings and programs as your old computer.
In other cases, I would recommend to restore the whole backup without using Migration Assistant or Setup Assistant, but a Late 2012 iMac uses a special OS X build, so the OS X version that you're using on your old Mac won't work on the new one. For more information, see > http://pondini.org/OSX/Home.html -
I am trying to restore an ipod to the factory settings. However I get a message that my username or password is incorrect. I am using my correct Apple id and password. What is the problem, please?
Was that Apple ID and password the original owner of the iPod? If not, try using the Apple ID and password of the original owner.
-
Hi,
I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
Has any other user had such a problem, and if so, how did they rectify it.
Any advice would be greatly appreciated.
Thanks in advance.
clarinet99Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up -
I'm told there is a virus associated with Adobe Reader. How can I tell if my machine is effected and if so what is the cure. I'm running OS X10.6.8 on an iMac with safari 5.1.5
There are no viruses currently affecting the Mac but there is something called Flashback which is malware that has been doing the rounds and affected many Mac users. Apple have released some updates to Java that should remove it and improve protection. Run Software Update to see if there is anything for downloading.
A few precautions that can help prevent your Mac becoming infected:
If you use Flash only download it directly from Adobe.
In all web browsers disable Java (but do leave Javascript on as that's something else).
In all web browsers make sure downloaded files aren't set to automatically open after downloading.
Consider disabling Java completely (launch Java Preferences in the Utilities folder and disable it - you'll likely rarely, if ever need it. If you do just turn it on and off again when your done).
You can also check out this link:
http://lifehacker.com/5900434/how-to-find-out-if-your-mac-was-infected-by-the-fl ashback-trojan-in-one-click -
Hello. Is it possible to convert to an AIFF file in itunes 10 and beyond, and if so what is the procedure?
I use FCP7 and often have a sound loop or the like that I need in AIFF format, I normally use itunes to do the conversion, but have heard that version 10 no longer performs this task...?
Thx for the help!
MBP 2.6 GHz Intel Core 2 Duo - Mac OS X 10.6.7 - itunes 9.2.1 (5)Doolittle wrote:
I can't find convert to aiff as an option in itunes 10.
It still works the same as in past releases. Go to Edit > Preferences > Import Settings, and set "Import Using" to "AIFF Encoder," and then the option will be available. Consult this document for details:
http://support.apple.com/kb/HT1550 -
I want to upgrade my Hard Drive to 1TB and more.
What is the maximun Hard Drive I can install for a MacBook Pro 2009
Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back the old original version, everything works...Any sugestion of brabnding or procédure to upgrade my hard drive?The largest 2.5" dia SATA drives available are 2 TB in capacity.
Have you tried the Seagate SSHD connected externally to the MBP via USB? The drive itself may be faulty.
Ciao.
Here is a good place to start looking for a replacement drive:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ -
Under Option Summary, the usage includes AUDIO, PHOTOS, APPS and OTHERS. What are the things included in OTHERS? It is using up my storage space. Can someone please help?
To add to Nick's comments, "Other" is typically approximately 1 gigabyte. Occasionally for some users, it gets much (many times) bigger because they have some corrupt files. If that's the case, it's best to restore the iPhone.
Plug the iPhone into (current) iTunes, let it sync, then choose "Restore" on the right. If restoring from the iPhone backup does not help, then restore (again) as new and then manaully sync the iPhone. -
The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?
The startup disk may need repairing ...
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If the disk needs repairing, restart your Mac while holding down the Command + R keys. From there you can access the built in utilities in OS X Recovery to repair the startup disk.
Maybe you are looking for
-
Good morning everyone! (At least it's morning in wonderful Pennsylvania USA!) AMD Athlon 64 3200+ (New Castle) Thermaltake Venus 12 CPU Cooler w/ Manual Adjust MSI "K8T Neo-FIS2R" K8T800 512MB x 2 Corsair TWINX1024-3200C2PT (Rated 2-3-3-6 1T) Antec T
-
Is it correct to say you can never have a memory leak in a java application
Also, what is the reasoning/advantage behind the developer not being allowed to explicitly call the garbage collector? Seems a simple thing to allow and would it not get rid of all the timing problems caused by the unpredictability of when the GC wil
-
Public Folders with Contacts vs Address Book
Which is the better approach: public folders with contacts or setting up an address book? I want to set up some sort of address book to hold details of some of our major clients. Rather than each person maintaining his/her own address list the plan i
-
Migrating dynamic NetConnection()s
Anyone blogged any examples of migrating Flex 1.5's dynamic NetConnection() objects with user-defined event handlers to handle events generated by server-side applications hosted on FCS 1.5 by extending Flex2's "sealed" NetConnection() class in AS3?
-
Flex mode on audio region and audio to midi quantize makes Logic crash..
Need confirmation on this also.. Choose an audio track and select Flex mode. Double click on the audio region so you get the sample editor. Choose Factory > Audio to MIDI Groove Template.. Select Try and then Use.. Logic freezes and goes down.