Global-correlation does not update.

Hi all,
I have a problem to update the global-correlation. I do get updates for the signatures in the IPS but see output below regarding the global-correlation;
==========================================
show statistics global-correlation
Network Participation:
   Counters:
      Total Connection Attempts = 0
      Total Connection Failures = 0
      Connection Failures Since Last Success = 0
   Connection History:
Updates:
   Status Of Last Update Attempt = Failed
   Time Since Last Successful Update = never
   Counters:
      Update Failures Since Last Success = 8
      Total Update Attempts = 8
      Total Update Failures = 8
   Update Interval In Seconds = 300
   Update Server = update-manifests.ironport.com
   Update Server Address = 204.15.82.17
   Current Versions:
      config = 0
      drop = 0
      ip = 0
      rule = 0
Warnings:
===========================================
Hardware used:
asa-ssm-10 (version 7.0(4)E4)
ASA-5520(version 8.4(1))
I see all traffic passing the firewall and ISP-routers.
I hope someone can help me with this issue or some pointers.
Thanks in advance,
Erik Verkerk.

Hi Jennifer,
Good to hear we do not have to buy an additional license and that global-correlation is included in version 7.0.
Thanks for your suggestion "access to internet", I did a re-re-recheck of my configuration and found out that I had a "little routing issue in one of my routers". I solved this and now it is working.
===========================================
sh statistics global-correlation
Network Participation:
   Counters:
      Total Connection Attempts = 0
      Total Connection Failures = 0
      Connection Failures Since Last Success = 0
   Connection History:
Updates:
   Status Of Last Update Attempt = Ok
   Time Since Last Successful Update = 2 minutes
   Counters:
      Update Failures Since Last Success = 0
      Total Update Attempts = 269
      Total Update Failures = 268
   Update Interval In Seconds = 300
   Update Server = update-manifests.ironport.com
   Update Server Address = 204.15.82.17
   Current Versions:
      config = 1236210407
      drop = 1300274962
      ip = 1300276386
      rule = 1300221126
Warnings:
=================================
Thanks for your time and help.
Thanks,
Erik Verkerk.

Similar Messages

  • Global correlation can't updated

    version is IPS7.0, asa5520-aip-ssm.
    Singatrue and  IME can be sucessfully updated,
    Global correlation can't updated,
    the Status of global correlation is Critical.
    I saw the website
    http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/ime/ime_collaboration.html#wp1053280
    and updated following the web page. But  can't work it.
    How could I update global correlation
    or go back old sensorbase?

    The output provided clearly indicates that the AIP-SSM is unable to resolve the update server address.  The server name update-manifests.ironport.com is not user configurable.
    Do you have more than one DNS server configured?  If so, disable all but the primary DNS server.
    If you only have one DNS server configured, please verify the AIP-SSM's management IP address has unrestricted access to the Internet.  (At a minimum TCP ports 80 and 443 and UDP port 53).
    Scott

  • My firefox beta 12 using Linux platform does not update to firefox RC1 via the "check for update" function. I know windows' beta version had this fixed, when would Linux get similar support ?

    Current platform : Linux
    Current firefox version : Firefox 4 beta 12
    Issue : does not update to RC 1 using the check for update feature.
    Background : previously downloaded beta 8 and then it automatically updated to beta 12 using update features but for RC1, it does not.
    I know users under Windows platform had same problem but was resolved and they can now update via check for update feature.
    Please implement for Linux users too.
    Thanks !!

    If you can't update then you can download and install the full Firefox 4 RC version.
    * http://www.mozilla.com/firefox/all-beta.html

  • Can't add music my iPhone from iTunes.  When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.  [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to

    Can't add music my iPhone from iTunes.
    When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.
    [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to add music to my phone.
    Also, just updated the phone's software today, and iTunes' software is already up to date.

    Hi Gregg,
    Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your Music app is behaving normally.
    Cheers,
    GB

  • HT2513 The date on my dock does not update automatically ? - Ps anybody.

    I use MACCBOOK PRO with OS X ver 10.6.8.
    I  Cal Version 4.0.4 (1395.7)
    Sometimes the current date does not update on my ical icon in the dock. After clicking on it the date becomes OK.
    I would appreciate if someone has a solution.

    I solved the problem by uninstalling Glims.

  • Mobile.me Calendar does not update/sync on iPhone

    Since I did my upgrade to the new version of Mobile.me Calendar (as requested by Apple!), my iPhone no longer shows entries that I have typed into the Mobile.me Calender website. I no longer use iCal because Apple said it would not work with the new version of Calendar on Mobile.me, so I did the upgrade to stay in sync with calendars on my mobile.me site and iPhone, but the iPhone does not update. I deleted my calendar entries on my iPhone hoping that the Mobile.me would re-sync the data, but that didn't happen either. Here is my info:
    iPhone version 3.1.3(7E18)   Model MA712LL (first original iPhone)
    What else can I tell you to help me please?

    Please always post your System details when you have a question. The upgrade to the new MobileMe calendar produces different results, and different problems, with different versions of OSX.
    Snow Leopard: during the upgrade process your iCal calendars should be moved to MobileMe (this can take some time and you have to wait for it to happen). Once done, your iCal reads the calendars from MobileMe so any changes made in either place will be visible immediately. If this has not happened then this Apple Tech Note provides instructions:
    http://support.apple.com/kb/TS3397
    Leopard: when the upgrade is completed iCal on Leopard will not be able to see the MobileMe calendars until an additional process is carried out, detailed in this Apple Tech Note:
    http://support.apple.com/kb/HT4330
    Tiger: iCal on Tiger cannot read the MobileMe calendars, period. The only workaround is to upgrade to Leopard, or Snow Leopard if possible (Intel Mac required).

  • Manual sync to ITunes does not update music

    I have a generation 3 (I think--it looks like the model number is A1318) IPOD Touch running version 4.1 operating system.  I have ITunes version 12.0.1.26. 
    It does not automatically sync.  When I select manual sync, it appears to go through the process and indicates that it has completed the sync, but nothing has changed.  It does not update the IPOD with new songs from my library.
    Any help would be appreciated.  For example are thees operating systems compatible?  If they are what am I doing wrong.
    Thanks
    Ron

    Try backing up to iTunes and restore from backup
    iOS: Back up and restore your iOS device with iCloud or iTunes
    Note that ll the synced media like apps and music have to be on the computer since they are not included in the backup

  • Batch Split in OBD & billed for the entire Quantity .RG1  register does not update the excise values

    Hi All,
    I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
    The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
    As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
    Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
    Sales order (no batch determination)  , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
    Can somebody help me .
    Thank you

    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
    Which field (H & J) they were referring in VBFA ?
    i have checked few other projects in my company and they all seems to be following the program
    How about the other projects' values in VBFA where your techinical team is guessing some issue.  Have you compared this?
    Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
    G. Lakshmipathi

  • HT1277 Mail on my Mac computer does not update when I update my mail on my phone and iPad.  Can anyone help me with this?  Is there a setting I need to check?

    Mail on my Mac computer does not update when I update my mail on my iPhone and iPad. Can anyone help me with this?  Is there a setting that I need to check?

    All that you had to do was to sign into the old account in order to update those apps. What I mean is that you just needed to sign into that account in the store settings like I described and that should have worked. You didnt need to enter the credit card information again - you justed needed to use the old ID and password.
    Anyway, I think the good news is that if everything else is OK with the new account, just download iBooks with the new ID - it's a free app so its not like you have to pay for it again. I'm not sure what the other App is that you are talking about - but if it is the Apple Store App - that is free as well.
    Try this anyway, when you try to update iBooks, just use the old password if the old ID still pops up.
    Did you try signing into the store settings with your new ID and see what happens with the updates then?

  • Yahoo finance portfolio does not update in firefox but is fine in Chrome and IE9

    This problem did not exist under the previous version of Firefox. One can access Yahoo finance my portfolio ok but even with streaming quotes on the portfolio does not update.
    Problem now solved. It was an issue of the Kaspersky root kit certificate

    I don't know if it matters, try this url instead, which is a secured one (https):
    https://twitter.com/

  • Application Compatibility does not update the database.

    Hi,
     I am using application compatibility manager 6.1, and SQL server 2012 as database. ACT run ok and it create the XML file but it does not update the database at "C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA" location.
    I can see the valid XML file but somehow the MDF file of database is not updated so my ACT windows does not showing anything on it.
    Any Help would be appreciated.
    Thanks
    Rakesh Patel
    rakesh patel

    Hi Rakesh,
    I am not sure if you have resloved your issue.
    But for helping others to know what to do if they meet the same issue as yours, I consider to mark the post as answered.
    If you would like further assistance, please post back and we will be always here to help you.
    Any concern about this mark behavior, you can just unmark it.
    Thanks for your understanding.
    Regards,
    Kelvin hsu
    TechNet Community Support

  • Time stamp does not update automatically

    Hi, All. I want include the time stamp (yyyy-mo-dd-min-sec) in the file name. However, the value of the time stamp does not update automatically/synchronizes with the computer clock at each new run. I need to do it manually with the right click and update the time to the current.
    How can I solve this? Thanks a lot in advance.

    What does this have to do with NI counter/timer hardware?
    What language are you using and what function are you using to get a timestamp? If the language is LabVIEW, then all you need is Get Date/Time in Seconds. If you are using a front panel Time Stamp control, then you are using the incorrect function.

  • SSRS 2012 (SP Integrated) report on SP 2013 PerformancePoint Dashboard: when too many filter items selected together report does not update anymore!

    I am having a situation with SSRS 2012 (SP-integrated) report rendered on SP 2013 PerformancePoint Dashboard using linked PerformancePoint (PP) filters.
    The report works fine as long as too many PP filter items are not selected at the same time. When gradually selecting more items from the filter, the report updates itself until more than a sepecific numer of filter items are selected - the report simply
    does not update itself anymore. This "specific number of filter items", when hit, generates the following error in ULS:
    An exception  occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem:  System.UriFormatException: Invalid URI: The hostname could not be parsed.    
     at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)    
     at System.UriBuilder..ctor(String uri)    
     at Microsoft.PerformancePoint.Scorecards.ServerRendering.ReportViewControl.ReportUrl(SqlReportViewData sqlReportViewData)    
     at Microsoft.PerformancePoint.Scorecards.ServerRendering.ReportViewControl.RenderSqlReport(TextWriter writer, ReportView sqlReportView)    
     at Microsoft.PerformancePoint.Scorecards.ServerRendering.ReportViewControl.RenderReportViewControl(HtmlTextWriter writer, ReportView rv)  PerformancePoint Services error code 20700.
    I already know that the cause of the issue is in the length of the query (perhapse RDL or MDX) that the browser is supposed to pass on to the instance of SSAS.
    Some people had suggested a workaround that was suitable for older versions or non-integrated SSRS (see here: http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cb6ede72-6ed1-4379-9d3c-847c11b75b32/report-manager-operation-cannot-run-due-to-current-state-of-the-object).
    Knowing this, have already done the changes suggested (adding the lines suggested to SP's web.config for Reporting and the web.config of the site on which report is rendred) at no avail, just to make sure.
    I have rednered the same report on the same dashboard using SSRS filters and there is no problem; it just works fine. This has to be a bug in PP that is causing this.
    Has anyone had the same problem with SSRS 2012 (SP-integrated) report rendered on SP 2013 PP dashboard using PP filter? Any fixes or workarounds?
    thnx!

    Hello everybody.
    I confirm the issue in Service Pack 1 Release 2.
    Poor workaround is to remove the repeated infromation from the member keys (in SSAS they can be really long).
    The issue seems to be specific to SSRS: Excel Services works well with the same filter.
    Sergey Vdovin

  • When syncing on my Galaxy Note 2 the 'bookmarks toolbar' does not update

    I have a laptop, desktop, and Android phone hooked up for syncing. After the initial sync the 'bookmarks toolbar' tab on the galaxy note 2 does not update when these are changed on the laptop or desktop. How do I fix this?

    Hmm nothing at https://twitter.com/mozservices or https://services.mozilla.com/ states that however it is having a service disruption according to http://status.mozilla.com/11627/149178/Sync-%5BBasic%5D

  • Book editing - change a photo, book does not update

    We are having a small problem. When editing our book, we double on some photos to edit them. Crop, color adjust, etc. Then we click done, and get sent back to our Book page.
    Now about half the time the book preview does not update the image that we just changed. It seems to update the larger full page images more often than it updates the smaller images in the book layout. If I double click the photo again, I can see the change I previously made are still there, but they are not being reflected in the book preview.
    So 2 questions, how do I force the book to update its photo preview? And if I print this will it use the edited photo, and not the version its showing me in the preview?
    Assume this is just a screen display issue, and that the generated print will use the right assets, right?
    This is in iLife '08 on Leopard on an intel Macbook.

    Squeegy:
    Welcome to the Apple Discussions. Try changing the layout, i.e. from frames with or without text to the other and then back. That may jump start the picture to display properly. It works for me when I do some cropping, like from landscape to portrait and the frame doesn't reset itself.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Maybe you are looking for

  • Printing problem with Photoshop CS 6 extended and HP printer

    Hi all, long time browser, first time poster. This is a weird issue, it should be noted from the first that I only have weird computer issues. I work at a technical High School where we have the whole Adobe CS6 Extended suite installed. We are runnin

  • WRT160Nv2: no internet after upgrade to 2.0.03 build 007

    hi, Recently I've expanded my home-network (2 wireless netbooks) with 2 wired pc's. Since then, the internet connection sometimes fails. Vista (on one of the wired pc's) reports it cannot reach the dns-server. I was using a WRT160N v2, firmware 2.0.0

  • Tools photoshop menu not working

    I just updated Photoshop CC and Bridge CC and Tools>Photoshop>Image processor is not working. Actually none of the submenus under Tools>Photoshop work. Any ideas? Thanks.

  • Windows Live won't install on my mac.  Can't Access Hotmail.

    I have MSN as my home page and access my email there with a link to Hotmail. In the last few days, the site has been changed and now when I try to access Hotmail, I am redirected to a new window indicating that I need to subscribe to Windows Live. Wh

  • NEEDED TO RECOVER THE IPAD MINI

    Hi..I need help..my ipad mini seem to be hanged...what should I do to recover the ipad?