Global inbound and outbound message size

Is there anyway from exchange shell to list the global maximum size restrictions for inbound and outbound emails? What is the syntax?

Get-TransportConfig | Select Max*Size
Blog |
Get Your Exchange Powershell Tip of the Day from here

Similar Messages

To Monitor inbound and outbound messages for ECC 6.0 business system

Hi Guys,
I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
XI server is on a different system.
I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
Thanks,
James.

James,
Go to SXMB_MONI in your sending system.
Here you will find a message ID fro your Message.
Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
Likeiwse it can be traced in the target system as well.
The basic point, The messages will have same Message Id on your R3 and on XI.
Regards
Bhavesh

Monitoring of inbound and outbound messages for business system ECC 6.0

Hi Guys,
I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
XI server is on a different system.
I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
Thanks,
James.

James,
Go to SXMB_MONI in your sending system.
Here you will find a message ID fro your Message.
Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
Likeiwse it can be traced in the target system as well.
The basic point, The messages will have same Message Id on your R3 and on XI.
Regards
Bhavesh

Seeking recommendations for handling large binary documents with security(preferable) for inbound and outbound scenarios from OSB- SOA and SOA- OSB

Hi,
I am currently working on a project with the following requirements
1. Client transfers binary document (between 1-20MB in size) from OSB proxy to SOA composite to Content Management system
2. Client retrieves binary document (between 1-20MB in size) from Content Management system to SOA composite to OSB proxy
In otherwords, a inbound and outbound integration.
What I have tried so far and my results:
Scenario A
1. Enabled MTOM on SOA composite by attaching wsmtom policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
Scenario B
1. Enabled MTOM and security on SOA composite by attaching wsmtom policy and SAML policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
I have a demo integration setup that writes a binary document to a file using the above steps. My SOA composite has a file adapter that writes the binary data to an external file and it is exposed as a web service with a simple WSDL definition that has an inline XSD schema with an single element of base64binary type. I have added a mediator that maps this base64binary element node to the file adapter's input node.
Result for Scenario A with file size less than 1 MB:
Flawless execution with sub-second response times
Result for Scenario A with file size of 8MB
First attempt: SOA composite faults with database transaction related error, solved by increasing JTA timeout
Second attempt: Flawless execution, but file transfer took over 100 seconds to complete. This is very poor performance and my suspicions are that this cannot be the expected behaviour, but I dont know the internal workings of the SOA composite and why its taking this long.
Result for Scenario B:
The OSB business service does not accept/recognize the SAML policy in the WSDL and suggests to configure OWSM policies manually, but OWSM policy in OSB does not have the wsmtom policy. Regardless of this, any permutation of MTOM + WSS security in this integration scenario either did not work outright or MTOM optimization was not happening ie binary data was materalizing in the message body.
I have only about 3 weeks left to implement a viable solution and the closest ive come to a solution is Scenario A but that +100 second response time for an 8MB file is really worrying.
I would appreciate any level of guidance, recommendations or suggestions as to how I go about tackling this problem.
Thanks
regards,
Johnny

I think this is due to the underlying mechanism of weblogic classloading..
You can contact oracle support @ https://support.oracle.com to report issues. Roughly this is the process .
1- get the Oracle Customer Support Identifier (CSI) for the client you are working for.
2- Create a user profile quoting the CSI. This will send an approval request to oracle support admins at your client.
3- Get the oracle support admins at your client site to approve your request for support access.
4-Once they approve , you can access the support site and raise service requests.

Degugging Inbound and Outbound idocs

Hi friends,
Can any one help me in debugging Inbound and outbound IDocs?
1.I found the inbound FM using Tcode we19,clicked the inbound FM button and called it in the debugging mode.
While debugging the Inbound FM iam nt able to figure out the actual problem.Is there any way to reach out the exact problem?
2.How to find out the outbound Idoc FM and debug it?
Your help is appreciated.
Thanks in Advance.

Hi,
Inbound or Outbound IDoc processing FM can be found iin partner profiles(WE20).
for Outbound: WE20 --> choose partner type --> Outbound parameters --> choose message type --> Message control Tab --> Double click on Process code to get the FM assigned.
for inbound: WE20 --> choose partner type --> Inbound parameters --> choose message type --> inbound options --> Double click on Process code to get the FM assigned.
For debugging, use Tcode WE15 for outbound, But before that u need to set the output type dispatch time as 1 (Send with periodically scheduled Job). Go to Output type assignment screen --> assign the output type --> choose further processing --> Set Dispatch time as 1 --> Save.
Note: U need to keep the break point in the Outbound FM or exit if any before going to WE15 to debug from that point.
Hope it helps,
SG.

INBOUND AND OUTBOUND DETAILS SAME: Problem

Hi Guys
I am facing problem regarding the inbound and outbound details. My scenario is bypass scenario, sender is JMS and receiver is R/3 system. Both the sender structure and the receiver structure are same. It has two SWC one for sender n one for the receiver. we r importing the idoc and using taht as External Defination. In the document , i am seeing the OUTBOUNd and Inbound details are same, such as the SWC which is being used for the receiver is being used for the outbound details, also the namespace and name of service interafce and the message type are being given the same here(all these are the IDOC name i.e IDOCMSGtype.IDOCname).
i have been asked to follow the document for my refrence.
please help me out. is it the correct process or any changes have to be made???
thanx in advance
Edited by: VArjun86 on Mar 4, 2010 7:37 AM

answered

Defining INBOUND and OUTBOUND

Hi Every One,
I have a very small question.
How do we define INBOUND and OUTBOUND?
I got this doubt, when I read some material, sometimes the directions (INBOUND and OUTBOUND) are told as per application systems which participate in message exchange? Sometimes the directions are told as per the XI integratin server.
Which of the 2 methods stated above is correct?
I hope I am clear in what I wanted to convey.
Bye, tschüs, adeu
-Naveen.

Hi NaveenKumar,
You use a message interface to describe a platform-independent or programming-language-independent interface, which you want to use to exchange messages between application components using SAP Exchange Infrastructure. Depending on the communication parameters defined for a message interface, it can either have the task of sending a request (outbound) or receiving a request (inbound).
An outbound interface sends a request message that is only used to make a communication party aware of data sent, without waiting for a response message. In the case of the latter, we also refer to publishing interfaces.
An inbound interface receives a request message that you reply to with a direct response message or whose data you can process in the system without a response.
I guess i have helped you solve your confusion.
Regards,
abhy

When To Use Inbound and Outbound Interfaces?

I use an Inbound message type when i am receiving some data and outbound message type when i push data out of the XI box??Is this correct..
And how to decide when to use a Inbound and Outbound Interface?

Hi Barik,
<b>I use an Inbound message type when i am receiving some data and outbound message type when i push data out of the XI box??Is this correct..</b>
WRONG!!!
outbound message->XI->Inbound message...
(sender system)->XI->(reciever system)
remeber: when u r sending some data to XI u send it using outbound interface.
and when u r sending some data from Xi to other system u use inbound interface...
Hope ur doubt is clear!!
regards
BILL
Use a Good Subject Line, One Question Per Posting - Award Points

Logging inbound and outbound connections through my Linksys router

Hi There,
I have a Linksys wireless router (WRT54G series) that I use to connect to the internet with my cable modem. I would like to be able to configure my home network to log inbound and outbound connections through my router.
My router, which I bought brand new a couple of years ago, provides some very basic logging through its administration interface. I can view a current log of very recent (within the past couple of minutes) inbound and outbound connections/traffic. However, I would like to be able to configure my network to log all inbound and outbound traffic for at least 1 or 2 days and have this log saved somewhere so I can retrieve and review it at a more convenient time. I haven't been able to figure out how to do this with my current Linksys router and would like some help in configuring my system.
Is it possible for me to configure (perhaps with a firmware upgrade or even by replacing my older Linksys router with a newer one) my router to continuously log a day or more's worth of inbound and outbound connections? If this is possible, what changes do I need to implement? Does Linksys offer a wireless router that has more sophisticated logging capabilities? What is the longest log period that I can create with a Linksys router?
If it's not possible to create such a log with my router, then what other components would I need to log this information? I've thought about setting up a Linux server with two network cards installed to act as a gateway between my router and cable modem which will log traffic. Would this be a good strategy to implement logging?
Thanks in advance.
Tom
Message Edited by on 07-28-2007 07:44 AM
Message Edited by on 07-28-2007 07:50 AM

well...the router's in-built log will only provide basic information about the incoming/outgoing log . So, it will be a good idea to install a separate log viewer .....

How to add Total Quantity in Inbound and Outbound Delivery screen

Hi,
I want to add Total quantity field in Inbound and Outbound Delivery screens.
In document flow i can see the line item quantities in ALV Format, but if i select Display the totals above the entry check box
in Change Layout--> Display, i didn't see any totals displayed.
Please help me on this?
Regards
Bhuvana

Hi
If the field is a customer field, see BADI 'LE_SHP_TAB_CUST_HEAD'
Regards
Eduardo

Sharing Handling Units between Inbound and Outbound Delveries?

Hello-
I could use some guidance with how to best setup a handling unit scenario for a Third Party Purchasing process.
1.) Sales Order for Third Party Purchased Material (Vended Finished Good) is created in ECC.
2.) Purchase Order is sent to supplier.
3.) Shipping Label is generated in SAP and is assigned a Handling Unit. Label is sent to supplier.
4.) Supplier affixes this label to product and ships it to our warehouse.
5.) Goods Receipt is performed via Purchase Order (MIGO).
6.) Warehousing activities and Post Goods Issue of Outbound Delivery are performed via this label and Handling Unit.
We would like to do a few new things with this process.
A.) We would like to have the supplier provide us with the HU on their ASNs and generate a Packed Inbound Delivery from it.
B.) We would like the same HU to eventually be associated with the Outbound Delivery to the end customer.
Is their a best practice to share a Handling Unit across an Inbound and Outbound Delivery?
Is EWM Cross Docking the best way to accomplish this?
Are there other proven approaches?
Thanks for your time and help.
-Ron

hi friend
Handling unit number for identity of packing materail , pallet material carrying the carton ,carton the carrying the material
like FG material and tray
identification number controlling the handling unit numbers.
with regards
dinesh

Need IDOC inbound and outbound programs

hi,
i am new to xi.
i want IDOCs , inbound and outbound / function module programs for PURCHASE ORDER
and GOODS RECEIPT.
ex: BD10 for material master (matmas01).
thanks and regards
v ijender

for purchase order.
ORDERS / ORDERS04
ORDCHG / ORDERS04
ORDRSP / ORDERS04
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
and also check the below link
http://www.erpgenie.com/sapedi/message_types_masterdata.htm
regards
kummari

SAP inbound and outbound delivey in single shipment document

Hi
We are doing outbound and inbound delivery creation in SAP. These are dropped to OTM(oracle transport management system). OTM will create orders for deliveries and groups multiple deliveries into one shipment. This is sent back to SAP for shipment creation. Problem we have is SAP can have either inbound deliveries Or outbound deliveires in a shipment. Based on inbound shipment or outbound shipment in shipment document type. OTM does not has this restriction and can bundle both outbound and inound in single shipment.
Business scenario we have is multi pick and multi drop, where there is possibility that 1) inbound del from vendor for PO 2) Outbound del to customer for SO and 3) outbound/inbound del for STO from RDC to DC in a single sipment.
Please advice ow this can be achieved in SAP.
Best Regards
Edited by: M.N. Phani Sai on Oct 28, 2010 10:34 AM

It is not possible to involve both inbound and outbound deliveries in the same shipment. SAP has its deficiencies...
http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/inbound-and-outbound-delivery-in-the-same-shipment-3512217
http://help.sap.com/saphelp_erp60/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
You cannot place outbound deliveries and inbound deliveries together in the same shipment document. Nor is it possible to assign Items from a delivery or an inbound delivery to different shipment documents. You must decide at the delivery stage whether order items can be shipped together in one delivery and therefore require only one shipment.
Edited by: Csaba Szommer on Oct 28, 2010 11:05 AM

Single Function module to create inbound and outbound delivery

Dear Frens,
   I would like to know how VL10A is creating a deliverty document in background mode.
   otherwise can anyone help me with a single function module or BAPI or BADI which creates both
   inbound and outbound delivery.
Regards
Priya

Hi,
Try FM RV_DELIVERY_CREATE or GN_DELIVERY_CREATE.
For creating a delivery wrt PO u 1st need to have a sales order i guess.
Regards,
Amit

Regarding Inbound and outbound interfaces in ABAP HR

Hi,
Iam new to SAP. Can you send the document related to Inbound and Outbound Interfaces in detail.
i.e What these interfaces comes under and steps to develop these inerfaces.
Thanks&Regards,
B.Thulasi.

Hi,
Iam new to SAP. Can you send the document related to Inbound and Outbound Interfaces in detail.
i.e What these interfaces comes under and steps to develop these inerfaces.
Thanks&Regards,
B.Thulasi.

Global inbound and outbound message size

Similar Messages

Maybe you are looking for