Global Navigation - Sites (no longer offers the 'scroll' option when there are many sub sites)

Hi, just completed a test migration (database attach method) to SharePoint 2010 from MOSS 2007. We have many subsites in the SiteDirectory and in MOSS2007 they would all show when you mouse over the 'Sites' TAB on the page. In 2007, when the list was too
long for the page, you would get the little down arrow triangle and you could mouse over this to scroll the list down. I can see that in 2010 there is a new option for 'Maximum number of dynamic items to show within this level of navigation', and here you
can set the number of items to be 'returned' for this view. The problem is that it doesnt give you the nice little down arrow so you cant scroll to the rest of the items (as you could in 2007)! Now, forgive me if I am a little blunt here, but what the heck
is going on here when some really great and simple functionality is removed when you change the Visual Upgrade settings to v4 (i.e. 2010) and you cannot scroll up and down you list of sites now!
I hope someone else has seen this and can offer some help/ideas to get around this limitation.
Thanks
Phil

Hi Jimmy,
No, never found an answer back then... We opted to create a 'site navigation' page, and included the different webparts to filter/show the subsites etc.
Hope you find an easier solution!
Cheers
Phil
Phil

Similar Messages

Since subscribing to iTunes match my ipad2 no longer offers the AirPlay option on the volume bar within Music, rendering my bowers Wilkins speakers useless for both iTunes and spotify. Why is this and how can I fix it?

Since subscribing to iTunes match my ipad2 no longer offers the AirPlay option on the volume bar within Music, rendering my bowers Wilkins speakers useless for both iTunes and spotify. Why is this and how can I fix it?
Apple made no mention of this being an expected issue, so I can only assume it's unintentional. Otherwise I wouldn't have subscribed to Match in the first place!

How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library.   Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC.   If iTunes still crashes, then if could be a number of other things, but probably not your library.   My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes.   If that doesn't work, then my next ideas you won't like.

I have synced my ipod many times, but for some reason it will no longer sync the apps, and says there are app installed that can not be determined. What should I do?

I have synced my ipod many times, but for some reason it will no longer sync the apps, and says there are apps installed that can not be determined. What should I do?

See these previous discussions:
not determined
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

How to change the default JRE when there are several version of JRE in Sys

How to change the default JRE when there are several version of JRE in System?
i have installed j2sdk1.5.0 then installed j2ee1.4,then installed Weblogic6.1 which use jdk1.3
Now the JRE is jdk1.3\bin
When run class that was compiled with jdk1.5,throw:
java.lang.UnsupportedClassVersionError
How can i change the jre to 1.5?

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

How to get the search option when we are creating new view

Hi,
How to get the search functionality when we are creating new view.
Ex:- if we see the standard component BT112S_SC. Under this
AdvancedSP is the view,
same kind of view if i want to create new view with same bol entity in my new component. I am unable to get that search functionality.
for search functionality,,i think view should inherit the super class CL_BTSRV_ADVS_CNTRL, but in my new view controller class, i am unable to find this class.
Can anybody give me some inputs on this.
Thanks,
neelam

In case you are still not able to proceed please refer the following blog.
http://blogs.moovar.com/sap/sap-crm-web-ic-create-a-new-search-view-and-result-view
Regards,
Harshit

Treemenu navigation hangs when there are many subitems

Hi,
I am using Treemenu (http://www.treemenu.com) for left navigation. After I have added some sub-items, after some level, I am not able to add anymore sub-items. The page just hangs and doesn't show anything. I was under the impression that one can add any number of sub-itmes in a treemenu. Please help me with this.
Ramesh

Your best bet is to post your problem on the message board at the site, most people wouldn't like to go through such a complex third party program to correct it:
http://www.treemenu.com/board/
Also you might want to take a look at known bugs at:
http://sourceforge.net/projects/jsmenu
and
http://www.treemenu.com/support/bugs.shtml

Netflix iPad app: Can't scroll seasons when there are more than nine (9)

Using the latest rev of the Netflix iPad app, I go to watch a TV series like South Park or Top Gear (UK). If I want to watch episodes from another season/series, I tap on the appropriate dropdown. Since the dropdown only shows nine seasons, and South Park and Top Gear both have more than nine, I need to scroll to see the rest. However, when I attempt to slide my finger up/down on the list of seasons, it does not move/scroll.
I've made sure I'm on the latest rev of the Netflix iPad app, I've deleted the app and reloaded it, and I've reported this issue to Netflix. Netflix claimed they have not heard of it before.
I'm on the first iPad (hardware), for what it's worth.
Hope someone gets it fixed!
Thanks,
ljfrench

Just called netflix and reported same issue. Son is trying to scroll down to seasons past nine on south park and family guy and only scrolls screen in background and not drop down menu of seasons. Reported this to netflix and was told they have never heard of it before
Went on to explain I tried this with my iphone 4, wifes iphone 3 and my sons ipod touch. All with the same result. Both daughters also have iphone 3 and will check tomorrow, but i'm sure the same result.
Workaround is to go to website and choose season and episode there which then opens in the netflix app. Huge pain though. Disappointing they still act like this doesn't exist.

How can i export the contents of just one artboard, when there are many in a single file

What's the best way to accomplish this? I have four designs I want to show someone. Also, if they're side by side and save the file as a pdf, will it just display single file? Thanks.

When performing a save as or export, enable the Range Radio Button, enter the pages you want.

How to suppress 'Do u want to save the changes?' When there are no changes

Hi All,
I have developed one form,which contains 3 blocks in that 2 are database blocks and one is control block.It's working fine.When I close the form without doing any change also it is showing an alert as 'Do you want to save the changes you have made?'. How can I suppress that alert when I haven't made any change to the form.
I am displaying one filed in the database block as 'null' until check box is checked.For that I have written code in when-new-block-instance trigger of that block.
There I wrote SET_RECORD_PROPERTY (GET_BLOCK_PROPERTY (:SYSTEM.TRIGGER_BLOCK, CURRENT_RECORD), :SYSTEM.TRIGGER_BLOCK, STATUS, QUERY_STATUS); also to change the block status as query.
But it is not working, still I am getting the alert,How can I solve this could anyone please give me a suggestion..
Thanks in advance.

So, this functionality can be done through CHECK BOX itself. Why you are making null by WHEN-NEW-BLOCK-INSTANCE. You can just set the update and insert property for that fields and rest things you can control from chexbox. And WHEN-BLOCK-INSTANCE-TRIGGER will fire once when you will access that block. If you want to set the same functionality for each record. Then you must use WHEN-NEW-RECORD-INSTANCE. for ex.
Trigger = WHEN-NEW-RECORD-INSTANCE (BLOCK-LEVEL)
Here i will assume that if check box is checked then he can update that fields.
IF :CHECKBOX='Y' THEN
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',INSERT_ALLOWED,PROPERTY_TRUE);
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',UPDATEABLE,PROPERTY_TRUE);
ELSE
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',INSERT_ALLOWED,PROPERTY_FALSE);
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',UPDATEABLE,PROPERTY_FALSE);
END IF;In the above code no need for set value to NULL.
And on CHECK BOX you can write like this...
Trigger WHEN-CHECKBOX-CHANGED (ITEM-LEVEL)
IF :CHECKBOX='Y' THEN
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',INSERT_ALLOWED,PROPERTY_TRUE);
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',UPDATEABLE,PROPERTY_TRUE);
ELSE
:FIELD_NAME:=NULL; -- here if check box is unchecked then it will set value to NULL
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',INSERT_ALLOWED,PROPERTY_FALSE);
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',UPDATEABLE,PROPERTY_FALSE);
END IF;-Ammad

SharePoint Search encodes the URL incorrectly when there are special characters in a filename on a file share

In our Sharepoint Server 2013 CA, Search Administration, Content Sources, we have configured a File Share Content Source.
Search queryes works fine and it returns relevant documents from the file share content source.
But when click on a file with a filename that contains special characters like "ÁÝÚÍÓÐ", Sharepoint encodes the link to the file incorect, and when we click on the link to the file, it throws an error on the screen saying "This
page can’t be displayed".
The following picture shows an example on how Sharepoint shows encodes the URL to a file with a special character in the filename:
As you can see, the link to the file is
\\xserver1\felagstest\Kompliserað\Ólavur.pdf, but when I hoover over the file, it translates og encodes this to
\\xserver1\Felagstest\KompliseraÃ°\Ã“lavur.pdf. If I manually type the correct link in the address field in Internet Explorer then it works.
What is the problem here, and more importently what is the solution to this problem?

This is solved in the Hotfix KB 2899469 for SharePoint Server 2013 October 14, 2014:
http://blogs.technet.com/b/stefan_gossner/archive/2014/10/14/october-2014-cu-for-sharepoint-2013-has-been-released.aspx
I installed the http://support2.microsoft.com/kb/2899469 hotfix, and now I can search and open files on external file shares with path and filenames containing non-US-ASCII characters,
without getting "This page can’t be displayed".
Where in the description of this hotfix is written, that it solves the encoding issue?

How do I make the slide "pause" when there are multiple buttons present?

I'm creating a selection slide that will allow the user to click button 1, 2, 3 or 4 to jump to the first slide of a topic group or to click button 5 to exit. The slide should just "stop" until any of the buttons are clicked. Unfortunately, the slide ALWAYS goes to the jump for button 1 without waiting for any action.
I've tried adding an invisible click box and an invisible text field with no success.
What am I missing or doing incorrectly?
Thanks in advance for any guidance.

Hi there
Yep, I can click the image and it scales back up.
You need to look at the properties for your button objects. I can easily see on the timeline that you have apparently cleared the pause point for each of them. If they had a pause point, they might look like this:
Cheers... Rick

HT1535 i cannot get to a screen that says library and my IPOD only shows 1 song when there are many more. My IPOD does not show upas a adevisw under my, or any other name really ready to toss it out the door.

I can't get my IPOD NANO to update my libreary onthe new itunes webset. It will no recognize my older musis, it shows noting to selece onthe right side of sreen to select musid, shows nolibrary, mostly shows nothing. Really frustrating. any help would be appreciated

You can only sync to one computer/iTunes library. To make this your syncing computer:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

HT2486 Address Book no longer offers the option to Edit an address card

Address Book on my main MacBook Pro no longer offers the option to Edit an address card. Optoins are "Add Contact" and "Share." Editing options in the Edit menu are also not available. I am syncing addresses via iCloud, but also make changes on my local

Try the steps in my post, here: After Lion upgrade, my addressbook does not work++

After I updated my iPhone 5 to iOS7 I can no longer see the individual chapters when playing my audio books. Also I can't edit and copy multiple text messages.

After I updated my iPhone 5 to iOS7 I can no longer see the individual chapters when playing my audio books. Also I can no longer edit a and copy multiple text messages like before. Is there a way to do these things I am missing?

Not only can i not see the individual chaptes -- apparently like you and everyone else suffering through the "improved" iOS7 -- when my audiobook repeats a "file" within chapter, which it sometimes does, I cannot get "inside" the chapter and move forward to where I'm supposed to be.
Whatever happened to "if it ain broke.......???

On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed?

On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed? It used to fully lay out the photos so I could add notes and detailed information before I sent them. I am thinking it is something simple that I have just missed...

The "Photos" view has been replaced by the Media Browser.
Most applications will show you the Photos icon in the Sidebar, when you need to select photos in a file chooser dialoge. Mail, Safari, the iWork apps. See Terence Devlin's User Tip: How to Access Files in iPhoto
For example, in the File > Open dialogue in Preview I am seeing this in the sidebar.

Global Navigation - Sites (no longer offers the 'scroll' option when there are many sub sites)

Similar Messages

Maybe you are looking for