Global reason code report generation

Dear All,
I am running uccx8.0 standard Edition. I want to take global reason codes report, How can i do that. I think in the CCX historical report i can see the reports for preserved. But i want to see for custom reason codes.

Sorry i got the solution,

Similar Messages

  • CUIC Not Ready Reason Code Reporting Issue

    We have a single node UCCX 9.0.2 environment with co-resident CUIC used for historical reporting.
    When we run the Agent Not Ready Reason Code Summary Report it will only give statistics for the system generated reason codes (the 32XXX ones), even if we choose other reason codes in the filter parameters.
    In the attached screenshots you can see where I chose a bunch of other reason codes as filter options, but none of them show on the report.  It does the same thing regardless of who runs the report, including the admin super user that's created during installation.
    Anyone have any ideas?

    We do not run the same version that you are on, however, I would also take a look at the Agent State Detail report and filter by the reason code field.
    The report includes a lot of additional data but at least you can get to the actual customized reason code values along with the duration the agent spent in that code per occurrence.
    Hope this helps.

  • CUIC Reason code reports

    I am trying to create a report that shows reason codes as words, eg 1 =meeting etc
    I have made what I believe to be the relavant changes, however whilst the Parameters check out ok, when i go to creat the fields, I get a syntax error.
    if anyone can take a look at this and let me know here I am goiing wrong, I would be grateful.
    please be advised, I haven't had any training on SQL, I am learning as i go!

    Thanks for getting back to me, unfortunately I don't have the ability to check this through an SQL application.
    Hence the question.:-)
    I will go through the query again
    Cheers Sarah

  • Historical report issue with CCX Custom Reason codes

    Hi Evryone,
    I have CCX version 8.5,
    In Cisco Desktop Administrator ,I have configured custom Reason codes for agent logout & Agent not ready,
    These code are working ok when agent is loging out or Not ready,
    But in Historical reports I am not able to see these custom Reason code base reports
    I can only see the reports for agent not ready/login logout with only global reason codes, but report didnt show the cutom reason code base report
    Please help me to troubleshoot this issue.
    Regards
    Deepak

    hi Deepak, 
    Did you do something else while creating new global reason codes? 
    I have global reason codes, but in the the Historical Reports "detail" tab don't show up any of them. Report only shows system-genereted reason codes.
    BEst regards

  • Reason codes

    Hi ,
    We have a contact center UCCE 8x, in which few of the Agents are migrated to Siebel CRM CTI Application from CAD. We are using Cisco CRM adapters for the CTI communications between CRM and ICM. So the call is maturing to the agent properly, but the (AUX code)reason codes reports are not getting appeared on the CUIC.
    Please let us know where are we need to look up to fix this reports issue.
    Also let me know where we need to configure reason code for Siebel desktop users.

    Hi,
    Can you let me know what is the solution for this issue?
    Regards
    Arun

  • Restricting Reason Codes

    Hi,
    Is there any way you can restrict reason codes for use only by supervisors in UCCX8?,
    ie they do not appear on the global reason code list for the agents, yet the supervisor can select a particular code (not visible to the agents in CAD) when required?
    Many Thanks,

    You could set up a seperate workflow for the Supervisors and put the reason codes in it the "workflow group list" leaving them out of the global list. I believe that would be the simplest way to accomplish this.

  • Report generation failed----​error code:-1720​5; Access Denied.

    Hi, All
        i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
        detail:
        An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
    Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
    The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility. 
        error code:-17205; Access Denied.
        locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
        How to fix it?
        Thanks a lot.
    BR

    Hm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
    CTA, CLA, MTFBWY

  • Reason Code dispaly in FBL3N report

    Hi!
    We have used reason codes for specific purpose i.e when ever cash and bank postings are happened, reason code must be assigned in order to know the nature of payment.
    But while taking the FBL3N report, reason code is not dispalying any data,available in BSEG table.
    how to do it?
    I have configured for choose additional fields under GL Accounting - GL accounts-Display line items-choose additional fields.
    regs,
    Ramesh

    Hi,
    Go to FBL5N and execute.you will see the list of open and cleared items.Change the layout by selecting the Reason Code in the list available and click the left arror button and save it.you can see the reason code.
    Thanks
    Prasada

  • Documents not coming in the report taken for reversal reason code

    Hi,
    We have defined the various reason codes for document reversal.
    When we try to take the report based on the reason code in FB03 or FAGLL03, the reversal doucment is not coming up.
    Is there any setting for it? or how to get that report? We need that report to authorize the reversals.
    Thanks,
    Pratap

    Hi,
    Please note that In standard SAP, the reversal reason code gets stored in the original document which is reversed. It does not get stored in the reversal document.
    You can get the report based on the field STBLG (Reverse Document Number) and STJAH (Reverse document fiscal year).
    This will be filled up for both original document and reversal document. And the clearing document number will be same for both the documents, so you can easily link the two documents in FAGLL03 output layout using sorting based on clearing document and filtering based on the two fields given.
    Regards,
    Gaurav

  • Agents showing in NOT READY Reason Code Summary Report

    I have a large install, with over 100 skills and CSQs.  Three agents always show up in everybody's Not Reason Code Summary Report, even though they are not assigned to those skills.  At this point none of these three agents has ever been active.  My assumption is there is a bug that until an agent actually goes Active at least once this happens.  I am looking for confirmation, documentation of such.
    Thanks.

    Hi,
    What is the version of IPCC you are running?
    What do you mean when you say agent goes active?
    Please refer to this guide below for UCCX 5.0. Refer to pg 65 for Agent Summary report.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_6_0/user/guide/crs601hr.pdf
    See if it has the information you are looking for.
    So you mean to say you filter this report based on Skill name and still see those 3 agents evene when you chose a skill which is nto assigned to three of them?
    Thanks
    Ankita

  • CUIC Agent Real-time reporting reason code

    Hi,
    In CUIC agent real time report reason code for not ready it shows 50002 or integer we have configured in ICM.
    How we can display reason code as name which we have configured in icm like tea, coffee , meeting.
    CUIC version we are using 8.5.
    Regards,
    Dinesh Joshi

    The way I got round this was creating thresholds - eg 1 = Lunch 2 = meeting etc.
    this does work, however you can't then Threshold the time on those particular texts, but at least you can see what 'state' they are in.
    let me know if it works..
    Thanks Sarah

  • Packaged CCE 9.03 - Display Reason Code Text in CUIC report

    The (Stock) Agent Team Real Time report includes a Reason Code field, but not the descriptive Reason Code Text (or Name).  Is there any way to present the descriptive text  or name in the report?
    Please note that we have CUIC standard.
    Thanks!
    Jackie

    Comparing Handled on an Agent report to Answered on a Call Type report is tricky, since depending on your call flows the two values can be vastly different. If you're looking at Answered and Handled on the same report (Call Type Historical All Fields should have both), there are opportunities for either value to be higher than the other within any given interval or across multiple intervals.
    Generally, if Answered is higher than Handled in one interval, then Handled is going to be higher than Answered in one of the intervals after that (though not necessarily the one right after - depends on call length). In the database, Answered is incremented in the interval when the call is answered, Handled is incremented in the interval when the wrap-up completes. So a very basic example would be with a single call - Say the Agent picks up an inbound call at 8:56am, and hangs up and completes wrap-up at 9:07am... The 8:30am interval would show 1 call Answered and 0 Handled, while the 9:00am interval would show 0 calls Answered and 1 Handled.
    -Jameson

  • The system shall allow for reporting by rejection reason code

    Allow the reporting of a reason code when an order is rejected for the purpose of tracking lost sales
    The system shall allow for reporting by rejection reason code to allow for tracking lost sales.

    A custom ABAP will have to be developed looking at table VBAK and VBAP to determine the reason for rejection, then group it by order number.

  • Getting Reason Code, Condition Type, and Condition Value in one report

    Hello there,
    I have got a Question for you all BW Gurus. I need the answer for this as soon as possible. I will assign points to all helpful answers.
    I am having a Sales cube, Delivery Cube, and a Conditions Cube which I built. Each cube is populated from different ODS. Means there are 3 ODS for 3 cubes. I am joining these 3 cubes under a Multiprovider.
    My Question is:
    We are using Reason Codes at Delivery level. We have identified an empty field in the delivery tables and populating this field with the reason codes. We have condition type and condition value only in the Condition cube. One of the reporting requirements is that we need to see Reason code, Condition Type, and Condition value in one report. I am planning to report on the Multiprovider. Since Reason code, Condition Type, and Condition value are not present in all the 3 cubes (means they are not common characteristics in the Multiprovider), I don’t think I can get those values in one report if I report on the Multiprovider. Please correct me if I am wrong. If what I say is correct, please tell me how to solve my problem. Once again, helpful answers will be greatly appreciated and rewarded with points.
    Thank you in advance.
    Kind Regards,
    Swathi

    Hello Swathi,
    Please do not post the same question on multiple forums.
    Thanks,

  • -1073741819 code using Report Generation with LV 6.1

    I'm studing about the Report Generation Functions with LV 6.1, and I'm trying to run some example about it, but the programs sends the next error: "Error -1073741819 ocurred at unknown System error in Font Style.vi> Set report font.vi>Easy text report.vi
    >. I'm using Windows XP plataform.
    someone knows what can I do?
    Thanks for your help

    Maybe you already know this but the font settings is a cluster of 4 elements: 2 integers and 2 strings. The 2 integers are character set and weight. They default to -1. The two strings are font name and font size. The default to blank strings. Are you wiring this cluster into your font settings terminal? Do you have -1, -1, Arial, and a number for font size inside the cluster (I use 4 for HTML reports)?
    - tbob
    Inventor of the WORM Global

Maybe you are looking for