Global search and replace on large-scale multi-user sites

Is there a way for Dreamweaver to select only the files that
are found when using the find and replace facility? This would make
updating large websites a lot easier.
From time to time I need to perform small changes to text or
code (that obviously is not contained in an include file or library
item) sitewide. As the site is administered by multiple users, it
uses the check-in/check-out system, which means that before editing
a file, it needs to be checked out. Thus, we can't just use search
and replace directly, we have to check out the relevant files
before performing the replace routine. The problem is selecting
only those files which will be affected by the search and replace
(and perform the operation in minutes) rather than selecting
everything (and spending hours).
Since it seems one is unable to select only files that appear
in the search results, I have to manually identify the folder that
holds the files with the results, and then check it out. As the
files which need to be edited might be scattered around the whole
site, this often means that I have to check out whole folders close
to the site root. The check-out command will include everything in
a folder, and the site contains thousands of files (which has to be
checked back in afterwards), so obviously this is a heavy and
time-consuming operation.
Does anyone know if DW has a way of selecting only the
relevant documents, or have suggestions for other ways of doing
this? I get the feeling that this is most easily achievable by
using tools outside DW, but I hesitate to go outside DW since it
would interfere with DW's site managment system.

I don't think you will find anyone here with such experience,
not the least
reason being that Library items run out of useful steam at
about 100 pages.
To use them on larger sites is just too tedious and risky,
honestly. Is
there any possibility to change to server-side includes?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"lochnessmoose" <[email protected]> wrote in
message
news:gb5ua7$a2t$[email protected]..
> Is there really noone here with experience with this
problem?
>
> The same problem applies to editing library items. I
need to update a
> library
> item that will affect 200+ files (on a website that has
thousands). Being
> able
> to select only those 200 for check out before editing
would be a lot
> easier
> than having to check out the entire 500 MB site....
>

Similar Messages

Global Search and Replace for Scrambled/Garbled Characters

So I exported a bunch (over 3000) contacts from my Outlook on Windows by using Outlook2Mac, and also tried just using a straight CSV export. But the Chinese characters came out all garbled, and I no longer have the use of that Windows machine anymore.
Here's an example:
Name: ∂¿¨¸™K (May Huang)
Job Title: ±M§·∏g≤z
Dept: ¿Á∑~≥B/ODM∑~∞»≥°
Company: ®Ù•ﬂ∞Íª⁄
Address:
§≠™—∂m§≠≈v§≠∏Ù15∏π
•x•_ø§
•x∆W
I figure I can slowly piece together most of it by doing lots of global search and replaces -- for instance, "•x∆W" should be "台灣" (Taiwan) -- and changing each characters I know one by one.
Problem is, I can't figure out how to do a find and replace! Can anyone help me out?
Thanks in advance!
PowerBook G4 17 Mac OS X (10.4.5)

But for the sake of getting a solution to the
original problem, I wasn't able to export the vCards
from AddressBook and then do what you said. For some
reason, I couldn't open the .vcf file in TextEdit;
kept telling me that the file wasn't encoded in
"Traditional Chinese (Windows, DOS)" format.
You need to use the Open dialogue in TextEdit and open the .vcf in something that it will accept. When you export the stuff from Address book, it indeed is not in Trad Chinese.
I don't have your stuff, so I can't be exactly sure, but it should work something like this. You export everything from Address Book. Use the Open dialogue of TextEdit to open the file, probably as UTF-8. Save as MacRoman. Open again as Trad Chinese (Windows). Save as UTF-8. Reimport. You may need to experiment to find what works right.

Global search and replace

I have a rather large .xpj and now have to find all instances
of the word "window" and replace with the word "page." Is there any
quick way to do this or do I have to do it topic by topic?

One more thing. On the Multi-Find and Replace window, you can
indicate that you want the HTML tags ignored. What about Java
script? Is there any way to ignore that in a file?
Thanks,

Bug in Multi-File Search and Replace in RH6?

I'm using the 6.0 trial, and one thing I want to be able to
do is to replace the variables I put in using JavaScript with the
new feature variables in 6.0. So, I went in to multi-file search
and replace, and searched for:
<script
language=JavaScript>document.write(varProduct)</script>
I copied this code directly from a topic, and pasted it into
the Search tool.
I don't even care whether I can successfully copy the code
from my new variable for use as the replacement text; I'd be happy
if the multi-file search would simply find all occurrences of my
original code so I don't miss any during conversion to 6.0.
It keeps coming up as not found, and this concerns me
greatly. Has anyone else experienced this? Is it a known bug? Does
anyone have a workaround?
Thanks!

Hi robowriter
I'm assuming you are using the wondrous little applet known
as Multi-File Find and Replace.
Unfortunately, this little beastie is like a cat. It
frequently has a fussy tummy and loves to hork up furballs. Well,
not exactly. Really what it does is fail to properly handle
anything with a line break. So you need a tool that does do this.
Fortunately, one exists! It is called FAR (Find And Replace). Oddly
enough, it was also written by a fellow Microsoft Help MVP named
Rob Chandler. (Rob lives in Australia)
You can download a trial version of FAR from the FAR page.
Click here to visit
the FAR page
Cheers... Rick

Global metadat edits, ie search and replace?

Does LR 1.0 support search and replace in metadata? Just realized I misspelled a product name that appears in each of 250 captions. I can't just sync them all, since different folks appear in different pix and I've spent last two days typing ID's. Any way to auto correct this? I run OS 10.4.9 on Powerbook G4 12in, 1GB. Many thanks, as always.

No, not really. Pretty certain you can do it via a Bridge script if that's any help.
John

Search and Replace in Dreamweaver

Dreamweaver CS3has a nice search and replace tool allowing for search and replacement of very large text strings.
Does anyone know of a good notepad editor that can handle that large of replace text strings.
Seems like most cant handle that much code in terms of search and replace.
thanks

If you're looking for something free/cheap that handles multi-line search and replace in source code, then there's always TextWranger if you're on a Mac:
http://www.barebones.com/products/TextWrangler/
There are plenty of Windows equivalents, but none I've used extensively and could recommend. This one is free:
http://www.htmlkit.com/
...and has a button to expand the find/replace fields for multi-line content.
That being said, they're not really going to do anything DW can't if you're already using DW.

Does the labview 8.5 project have a search and replace option that appies to all vi's in the project?

In 8.2, the only thing the project has to let you search for a vi is "Find vi's on disk", which is redundant since I can do that in windows explorer. What I want is a way to search for vi's in my application the way the search and replace function works, except I want it to apply to all vi's in a project instead of just the vi's currently loaded in memory. Do we have this in 8.5?
-Devin
I got 99 problems but 8.6 ain't one.

I'll give an example of what I was trying to do yesterday in 8.2. I tried to build a source distribution of a large instrument driver. Since its an instrument driver there is no single top-level vi that contains all vi's - there are different categories of vi's to do different functions on my instrument. When I'm doing the source distribution I have to do it in several stages since 8.2 doesn't do source distributions right - but thats not really what this post is about. Anyway, every time I do the distribution I get an error saying CnvrtArrayIntoBitPattern.vi is password protected (and another engineer wrote it and I don't have the password). So the build fails. Now I don't know the password, I'll find it out later, but I at least want to know where in the hierarchy this vi is even being called. I don't know where it is on disk, I don't know what is calling it, it isn't in the project explicitly, it's a dependency.
If I had a top-level vi that loaded everything, I could just do a search and replace on that vi and find exactly where it is being called in seconds. But since I am in a project and have no idea where to start looking, there is no way I can find this vi. Ideally, in 8.5 there would be a search and replace menu option that searches all vi's in a project to find any calls to this vi. I want to look for all instances of a vi in my project. It sounds like you still can't really do that in 8.5.
What I ended up doing is writing a vi that opens all vi's in a folder hierarchy on disk. I don't know where this vi is, but all vi's in my project are in the same root folder. So I run my program to open every single project vi. Then since I know every single vi is open and loaded simultaneously I used the search and replace function on one of them to find all instances of CnvrtArrayIntoBitPattern.vi. But that is a painstaking process to create a simple search function.
I think NI is maybe misunderstanding how people are actually using a project. Not every vi that is being called is going to be explicitly listed in the project. (Its this same issue that makes source distributions impossible in 8.2 - you can't target dependencies to a support library so every dependency has to be explicitly listed in the project - which is virtually impossible because they are all in different locations and there are hundreds.) Most people have lots of general purpose vi's they use in many different projects, and they are buried down in code so we aren't even sure where they are all being used. The new searches you mention assume you already know where the low-level function is and you are looking for their callers. But sometimes you don't even know where the low level function is. What if its an NI directory function? For example, "resample waveform.vi" is an NI function that changed its defaults in 8.2 which meant we had to find every single place we used it and wire "open-interval?" to a constant instead of depending on the default value. Its in an NI library somewhere and is never listed as a project vi. So when I needed to find every place through every project that I used this vi, I couldn't do it through the project manager because there is no search function. To be practical I add the project-specific vi's to the project, and maybe a couple support directories, but there will always be lots of vi's as dependencies. But every now and then I'm still going to want to search for one of these vi's. So in 8.5 there is there still no way to search for vi's that aren't explicitly listed in the project?
-Devin
I got 99 problems but 8.6 ain't one.

How do I search and replace in comments in Acrobat XI?

I use a Mac and just downloaded Acrobat Pro XI specifically to search and replace phrases in comments in a large PDF. According to this Adobe Help page, I should be able to do this: https://helpx.adobe.com/acrobat/using/searching-pdfs.html I copied the relevant section below and marked with ***. However, I don't see I don't see an arrow for the options that would allow me to include comments. I understand how to include the comments with advanced search, but I want to also replace text. I also checked in preferences and searched the forums. Could someone please advise and maybe include a screenshot, if possible. Thanks!
Choose Edit > Find (Ctrl/Command+F).
Type the text you want to search for in the text box on the Find toolbar.
To replace text, click Replace With to expand the toolbar, then type the replacement text in theReplace With text box.
(Optional) Click ***the arrow ***next to the text box and choose one or more of the following:
Whole Words Only
Finds only occurrences of the complete word you type in the text box. For example, if you search for the word stick, the words tick and sticky aren’t found.
Case-Sensitive
Finds only occurrences of the words that match the capitalization you type. For example, if you search for the word Web, the words web and WEB aren’t found.
Include Bookmarks
Also searches the text in the Bookmarks panel.
***Include Comments***
Also searches the text of any comments.

Here are screenshot of my attempts to make reducing double returns to one. First up selection of a double return:
Copy to the clipboard. Do a Command-F. Here's the resulting dialogue:
I paste in the contents of the clipboard:
Note the Search field no longer has an empty slot selected. Something is clearly in there, but no instance of whatever is has been found. Nevertheless, I proceed to set up the Replace field by selecting a single return:
Copy that to the clipboard and paste into the Replace field:
Nothing to search for and therefore nothing to replace. Am now wondering what that little scoop to the right of the eyeglass icon might indicate. Clicking on it reveals this:
Definitely not "a solution that just works."

Search and Replace in Pages 5

Search and Replace in Pages is now seriously regressive. Previously I could search for "invisibles" in a document and globally replace the search "invisible" by a replace one. Now I can't find a way of doing that. Any suggestions?

Try this:
Turn on Show Invisibles in the View menu.
Select (highlight) the double para breaks.
Use Command-E (Find using selected text).
Open the Find dialogue box (Command-F) and select Find & Replace.The selected para breaks will be in the Find text entry box, but will not be visible!
Click in the Replace text entry box.
Select (highlight) a single para break.
Go to the Edit menu / Find and select 'Use selection for replace' (it will not show in the Replace entry box).
In the Find & Replace dialogue box, click on the Forward or Back arrows to highlight the selected items (e.g. double para break) where you wish to start replacing in the document.
Use the Replace All / Replace & Find / Replace buttons as per usual.
Not a nice solution, but I hope it gets you going until Apple restores the previous functionality!

Can i search and replace in the itunes library database file?

Hi --
I need to update the file location in the itunes database for a few thousand songs. These songs are just part of my full collection. A few hundred of these songs are referenced in playlists. Rebuilding the libarary, consolidating the library, adding the new folder to library -- none of these suggested solutions to similar problems will work for me. (My collection is too large for one drive and is spread over several drives, and I have many playlists with hundreds of songs, and the playlists would be ruined with any of these approaches.)
I thought I had an easy solution by doing a search and replace in "itunes library.xml," replacing the old file path with the new one. But then I learned (as you probably already know) that the real information is stored in "itunes library," and the xml file is just a downstream copy of that information. All my edits were overwritten as soon as I opened itunes.
The solution to my problem is completely straight-forward if I can just do a search and replace in "itunes libray." Is it possible to edit that file directly? The only database program I have is MS Access, on windows, and it couldn't open the file.
Thanks very much
- Mark

How to Move Your Music to a New Computer.

Alternate Search and Replace Tool

I need to automatically search a piece of HTML code in
hundreds of help topics. Unfortunately, since RoboHelp's
"Multi-File Find and Replace" tool doesn't accept carriage returns,
it won't accept the three-line string of HTML I need to replace.
Can anyone suggest a (hopefully free) third-party
search-and-replace tool that won't break RoboHelp in some way? I'm
a bit worried because I'll be pasting a ton of conditional text
markers.

Hi, Adam,
Two find-and-replace tools that are often mentioned in these
forums are FAR and BK ReplaceEM. FAR is shareware, but free to use
for the first two months; BK ReplaceEM is freeware.
http://www.helpware.net/FAR/index.html
http://www.snapfiles.com/get/bkreplace.html
Pete

Perform search and replace in a custom command?

Hello,
Does anyone know how to perform a search and replace for selected text in a custom command?
My specific dilemma is this: I have a large document containing [very poorly formatted] songs. For example:
Verse1 Verse1 Verse1 Verse1 Verse1
Verse1 Verse1 Verse1 Verse1 Verse1
Verse1 Verse1 Verse1 Verse1 Verse1
Chorus Chorus Chorus Chorus
Chorus Chorus Chorus Chorus
Chorus Chorus Chorus Chorus
Verse2 Verse2 Verse2 Verse2 Verse2
Verse2 Verse2 Verse2 Verse2 Verse2
Verse2 Verse2 Verse2 Verse2 Verse2
Verse3 Verse3 Verse3 Verse3 Verse3
Verse3 Verse3 Verse3 Verse3 Verse3
Verse3 Verse3 Verse3 Verse3 Verse3
I would like to be able to select all the text in a verse and run my custom command on it that would remove the "" and replace "" with " ".
Thanks,
Kelso

replaceAll method in String is available only from 1.4 onwards.
http://java.sun.com/j2se/1.4.1/docs/api/java/lang/String.html#replaceAll(java.lang.String, java.lang.String).
You could use a method to search and replace a String with another...
public String replace (String source, String search, String replace) {
 StringBuffer result = new StringBuffer();
 int start = 0;
 int index = 0;
 while ((index = source.indexOf(search, start)) >= 0) {
 result.append(source.substring(start, index));
 result.append(replace);
 start = index + search.length();
 result.append(source.substring(start));
 return result.toString();
}

Using a variable in a Powershell search and replace string

Hi
a couple of days ago I posted a question about doing a search and replace with wildcards
Search and repalce with Widcards
I got a swift and very helpful answer but now I need to build on it.
In a text file I wanted to replace all the text between two defined words. the script I got was this
$text = 'Some Server this bit of text varies Language stuff'
$text -replace '(.*Server) .+? (Language.*)','$1 it will always say this $2'
It works great but now I want to replace "it will always say this" with a variable and I can't figure out the correct grammar to make this happen.
Can anyone help??
Thanks
Alex

Here's one way:
$replace = 'it will aways say this'if ( $text -match '(.*Server) .+? (Language.*)' )
{ "{0} $Replace {1}" -f $matches[1,2] }
else { $text }
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

HTML character entities problem in saved regex search and replace query

I have a many search and replace regular expression queries (.dwr files) that I have saved. I have a problem specifically with saved queries that contain HTML entities such as "& nbsp ; " or "& shy ;" (spaces added otherwise code doesn't render in browser). For example if I use the following search:
([\d]{3}& shy ;[\d]{3}& shy ;[\d]{4}|[\d]{3}& nbsp ;[\d]{3}& nbsp ;[\d]{4})
(which searches for numbers in the 888-555-1234 or 888 555 1234 formats)
This will work fine if I manually enter it into the search text area. However if I save it to file and reload it, it will no longer work because the  and characters are now displayed as " " (space) and "-"(shy) rendering the saved query useless as it's no longer searching for the code. I have some fairly long and complex queries and this is becoming a problem.
Thanks for any help.
I'm currently using Dreaweaver CS4 at home and CS5.5 at work.

Thanks for your reply Kenneth, but that is not what I'm trying to accomplish. I'm looking for the HTML entities that exist in the source code which are & shy ; and & nbsp ; (without the spaces). As I mentioned above, if I enter them manually in the search box, I will get the corrrect results. If I save the search and then reload it, the special characters are no longer in HTML and the search is now useless.
Just for example again
In an open document in code view insert a number in the format (without the spaces): 888& nbsp;888& nbsp ;8888
Open a search dialog box and enter (without the spaces): [\d]{3}& nbsp ;[\d]{3}& nbsp ;[\d]{4}
The search will find that entry.
Save search as phone.dwr for example. Then load it and try the search again. It won't work because upon loading the search Dreamweaver replaces the HTML code which was saved with the rendered HTML. So now the search shows up as: [\d]{3} [\d]{3} [\d]{4} which will not find the string with hard coded non-breaking spaces that I'm looking for.
Basically I want to be able to save a search query for reuse. When I load a search query, I want it to be exactly what I saved, not something that DW has rendered (that doesn't work).

How do I search and replace for invisibles in Pages 5.5.2?

Three related problems all involving search and replace for invisibles.
1. A block of text where all double returns need to become single returns.
2. A block of text where all returns need to be replaced with a single word space.
3. A block of text where all double word spaces to be replaced with a single word space.
Pages 09 could do all three this handily. How can these be done in Pages 5.5.2?
Appreciated.

Here are screenshot of my attempts to make reducing double returns to one. First up selection of a double return:
Copy to the clipboard. Do a Command-F. Here's the resulting dialogue:
I paste in the contents of the clipboard:
Note the Search field no longer has an empty slot selected. Something is clearly in there, but no instance of whatever is has been found. Nevertheless, I proceed to set up the Replace field by selecting a single return:
Copy that to the clipboard and paste into the Replace field:
Nothing to search for and therefore nothing to replace. Am now wondering what that little scoop to the right of the eyeglass icon might indicate. Clicking on it reveals this:
Definitely not "a solution that just works."

Global search and replace on large-scale multi-user sites

Similar Messages

Maybe you are looking for