Global Security in WSAD

Hi i am trying to enable global security in WSAD5.0. as soon as i check the "Enable java Security" and click on apply it says "Validation failed for user WASAdmin. Please try again..."
I have the following setting in the global security settings:
Enabled     true
Enforce Java 2 Security     false
Active Protocol     CSI and SAS
Active Authentication Mechanism     LTPA
Active User Registry     Custom
Use FIPS     False
I have enabled/configured costum user registry. Do i need to give anything in the LocalOS registry?
Have enabled LTPA under auth. mechanisms.
I know that i am not supplying correct password somewhere but i am not sure where.
Please help me with this, this is a very new topic for me.
Message was edited by: Praveen
alvandip

I resolved this.
WSAD 5.0 is not a good xml editor i feel:
The values that i supplied through the admin console should be written in some xml file and it was unable to do so. Finally, i edited the xml files manually. this resolved the issue.

Similar Messages

Flash Player 8 global security settings

I'm having some trouble with the global security settings in
Flash Player 8. I have deployed the player successfully using GPO,
but now have a piece of software (Nelson Thornes) that requires
content from c:\program files\nelson thornes to be allowed in order
to run. Manually enabling this using the settings manager works a
treat, however it only changes it for the current user and I can't
find any way of setting it per station so that I can package it up
and deploy it. I can't expect all of my users to do this
themselves.
Please tell me there's a way of doing this?!?!

AndiMorris wrote:
> I'm having some trouble with the global security
settings in Flash Player 8. I
> have deployed the player successfully using GPO, but now
have a piece of
> software (Nelson Thornes) that requires content from
c:\program files\nelson
> thornes to be allowed in order to run. Manually enabling
this using the
> settings manager works a treat, however it only changes
it for the current user
> and I can't find any way of setting it per station so
that I can package it up
> and deploy it. I can't expect all of my users to do this
themselves.
There is an MMS.cfg file that you can deploy that will allow
you to
control this site wide without individual user interaction
(overriding
settings manager).
Start learning here:
" IT Administration: Configuring Flash Player auto-update
notification"
http://www.adobe.com/go/16701594
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player
Adobe

Global Security Profiles

Can somebody list out the steps to be done to create a Global security profiles. Is any document available. Please let me know.
Tks.

Hi,
Im trying to change the standard securtiy to security using Security Groups.We are having multiple BG's (3). This what I did:
1. Enable the profile Enable Security Groups at application level to YES
2. I ran the concurrent Enable Multiple Security Groups.
3. I was now able to open the Assign Security Profiles window.
I created a new user under sys admin with no resp attached. For this user I attached the HRMS Manager resp thrice with different BG & Securtiy profile combinations under Assign Security Profiles window. When I log in as the new user, I dont see all the three resp I defined. I can see only two resp with suffix standard and name of one BG appended to HRMS Manager. The resp with other BG's as suffix are not appearing.
Kindly advise.

No Global security settings for my localhost, Help?

Player 9
I develop flash apps in localhost and I receive that error
message:
Adobe Flash Player has stopped a potential unsafe operation
The following local application on your computer or network:
/Application/MAMP/htdocs/joomlagraf/modules/.../ssp.swf is
trying to communicate with this Internet-enabled location:
localhost
I beleive you can fix that in the Global security settings,
but this panel is absent when I right click on my flash movie. I
got —> Privacy/Local Storage/Microphone/Camera only, on a
fresh player 9 install.
How can I access that Global security settings panel, what
can I do???????????
My work is stopped......... Help!

Hi Popocatepelt,
Glad to hear that worked for you….
Local Access Only allows the published SWF file to interact
with files on the local system, but not on the network. Access
Network Only lets the published SWF file interact with files and
resources on the network, but not on the local system.
For more info take a look at the following
http://www.adobe.com/products/flashplayer/security/
For local content:
http://www.adobe.com/products/flashplayer/articles/localcontent/

Allowing Global Security Settings for Local Flash Content

Hi all,
We have developed one e-learning course for our client. This
course will be deployed on the CD; that means it will run locally.
This CD will be dstributed to thousands of users. In this scenario
I am currently suffering from the Global Security Settings issue as
this project uses Fscommand to communicate with the javascript. We
can set the Global Security mannually but it is not feasible to ask
client to mannaully set the Security Settings to "always" as there
are thousands of users viewing this course locally.
I have tried setting "always" value to allowScriptAccess
property of the Object/embed tag in the html but it does not work
where the browser Security Settings are kept as "High".(I think
this is the reason)
So what will be the workaround for this issue?
Please reply me if you gone through this problem and found
any workaround.
Thanks in advance.

Hi Popocatepelt,
Glad to hear that worked for you….
Local Access Only allows the published SWF file to interact
with files on the local system, but not on the network. Access
Network Only lets the published SWF file interact with files and
resources on the network, but not on the local system.
For more info take a look at the following
http://www.adobe.com/products/flashplayer/security/
For local content:
http://www.adobe.com/products/flashplayer/articles/localcontent/

Global security group permissions not propogating

I have a single flat domain that has migrated from NT to 2003 to 2008. A number of the global groups go back to the mid ninties.
I recently purchased a EMC VNXe 3300 for addition storage, joined it to the domain, migrated a bunch of folders with permissions using robocopy no problem.
Now I have one shared folder and the global security permission applied to the top level folder but did not decend the tree. I tried applying it from the advanced security tab and choose apply to this folder and all child objects and folder or some such
verbiage. I could not get that permission on anything below the top level unless I went to the object explictly and applied it.
I created a new global security group and applied it to the folder and it descended the tree with no problems.
I have hundreds of folders and hundreds of groups I need to move to this new storage, I have no idea what is wrong here?

Hi,
Please help collect the current permission setting of the parent folder and a subfolder (which the original global security group cannot be applied with "inheriting").
Meanwhile have a try with icacls instead of GUI to see if it will work. For example:
icacls x:\folder /grant <group>:(OI)(CI)F
If you have any feedback on our support, please send to [email protected]

Global security

Hi I realise there are multiple threads on this issue already but i'm a little confused about this. I have created an swf that manages to get all urls assigned to the buttons. When I publish the file I set the global security to allow that file to work and all links work. My question is when I transferred the html and swf to a new pc none of the buttons worked I was not even given an option to update global security settings by adding a new location
If I was to load this swf to an ftp media server is that the location I need to allow and can I only do this from the original PC where the file was created as transferring it seemed to make the buttons not do anything
Thanks

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />
<title>Untitled Document</title>
</head>
<body>
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553340000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0" width="1280" height="800" title="mm">
<param name="movie" value="filesource" />
<param name="quality" value="high" />
<embed src="filesource" quality="high" pluginspage="http://www.macromedia.com/go/getflashplayer" type="application/x-shockwave-flash" width="1280" height="800"></embed>
</object>
</body>
</html>
the file source is the link of the swf uploaded on the media server. The page was then saved as an htm file through dreamweaver
I hope I haven't done a monumental mess up of some sort since I tried it on multiple PC's and it seemed to work on each one through the USB stick

Flash Global Security & Links Not Working?

Hi all,
I am absolutely near some sort of breakdown with my Flash website....I really hope someone can help!
I am building my portfolio website; I'm using Dreamweaver CS3 (on Mac) and inserting Flash animations in the centre of a table in each Dreamweaver page. All was working fine until I built the Contact page animation on Flash last night. I linked in some external websites to my Blog, Flickr and Twitter and also need a button to launch the user's default mail client.
When I tested the animation (CMD+ENTR) in Flash the links appeared to be working, if after a few clicks. I then inserted the Contact animation into the Contact.html page on Dreamweaver and tested it in Safari. A dialogue box came up regarding something about security settings and Flash 8 (makes no sense as I am using Flash 9); and I ended up on the Global Security Setttings panel page on the Adobe website. I selected the entire folder the website is in on my hard drive under "Trust Files in these Locations". Now the ENTIRE website's flash animations are not working. There are links to internal pages of the site (i.e. a link to the "Contact" page in the animaiton on the Home page) which are now not working either. No error messages come up when I test the movie in CS3 either. I have refreshed Safari, restarted the Mac and redone the folder on the Global Security Settings panel. Also loaded the entire website onto a PC this morning, all links not working either.
Actionscript 3 on the Contact page looks like this:
import flash.events.MouseEvent;
//---Blog Button---\\
var getBlog: URLRequest = new URLRequest("http://www.myblogsdomain.com");
Blg_Btn.addEventListener(MouseEvent.CLICK, eClick);
function eClick(event:MouseEvent):void{
navigateToURL(getBlog, "_self");
//---Twitter Button---\\
var getTwitter: URLRequest = new URLRequest("http://www.twitter.com/mydomain");
Twt_Btn.addEventListener(MouseEvent.CLICK, eClick1);
function eClick1(event:MouseEvent):void{
navigateToURL(getTwitter, "_self");
//---Flickr Button---\\
var getFlickr: URLRequest = new URLRequest("http://www.flickr.com/photos/mydomain");
Flkr_Btn.addEventListener(MouseEvent.CLICK, eClick2);
function eClick2(event:MouseEvent):void{
navigateToURL(getFlickr, "_self");
//---Email Button---\\
var getMail: URLRequest = new URLRequest("mailto:[email protected]");
Eml_Btn.addEventListener(MouseEvent.CLICK, eClick3);
function eClick3(event:MouseEvent):void{
navigateToURL(getMail, "_self");
I'm not 100% sure if the e-mail AS3 I set up is correct, but as none of the links are working I can't test it. I cannot provide a link to the website as it isn't uploaded yet, and I don't really want to upload it not working properly.
Any help at all would be gratefully received, I'm really, really on the brink of some sort of breakdown. Thanks.

Thanks Samuel.Wong and Ned Murphy for the information.
I'm not actually sure what happened but my website suddenly started working again today, I think possibly by selecting "Always Allow" on the Global Security Page as well as inserting every individual file as well as the folder under "Trusted Locations" has also done the trick.
The external links appear to work when I test the movie in Flash CS3, but the same warning comes up once the movie is inserted into a Dreamweaver html page and tested in Safari. However I think when the links (all except the email ) appear to be working in Flash then it should be just fine once uploaded onto the server. Many thanks for your advice once again.
Maxx

Need advice in flash's global security settings

Hello guys!
So, I want to ask you a question regarding Adobe Flash Player's global security settings.
I have a .swf file on my computer which when I want to load it with mozzilla browser a security panel appears saying it is not trusted.
I changed the global security settings and the panel does not appear anymore.
But my question is, if I, as a host want to publish that.swf file on the web, with the global security settings changed, other user from different computers who acceses my web page get's the same security warning, do they have to change the global security settings on their own?
Or the problem is solved by me, as a host, by changing the global settings and trusting the .swf file only from my computer and so anyone can acces the specified web page without changing the global security settings.
Thanks!

let me clarify the issues:
1)websites/adnetworks are setting flash cookies in user's lso to avoid browser cleaning and to respawn
tracking cookies.
where is data that is attempted to be set by these websites/adnetworks but blocked by the global settings?
where is data that is set but not deleted yet by user?
where is data set and then deleted by user once they use global settings?
2) flash cookies set on user side are recorded in adobe global settings. user computer must be static, not static ip address, so the global settings on adobe can allocate flash cookies to each user's computer.
where is the "static address code" data associating the user's computer to the flash cookies being set?
3) In regard to issue#1, is any of that data shared with any other company?

Global security pane

Excuse a novice, but the global security pane is not
displayed on the Adobe site, please HELP

Tnx for the answer ...now got it..
ALso whats the diferece b/w repository owner and runtime repository owner (OWBRT_SYS) as both have admin privilege i thnk.
Edited by: user10729112 on Jan 11, 2010 9:23 PM

FSL-02003 Unable to set owner /sapmnt/MHS/global/security/data for 512.

Hello,
I got the error "FSL-02003 Unable to set owner /sapmnt/MHS/global/security/data for 512" while installing SM 7.0 EhP 1 on Linux at phase "Create Secure Store". I have tried changing owner of the folder, but no change.
Can anybody help?
Thanks for your help
Kris
WARNING[E] 2009-07-24 17:54:48.617
           CJSlibModule::writeError_impl()
FSL-02003 Unable to set owner /sapmnt/MHS/global/security/data for 512.
TRACE      2009-07-24 17:54:48.618 [iaxxejsbas.hpp:483]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE      2009-07-24 17:54:48.699 [syuxctask.cpp:1382]
           CSyTaskImpl::start(bool)
A child process has been started. Pid = 18576
TRACE      2009-07-24 17:54:48.784 [syuxctask.cpp:1382]
           CSyTaskImpl::start(bool)
A child process has been started. Pid = 18577
ERROR      2009-07-24 17:54:48.822 [sixxcstepexecute.cpp:950]
FCO-00011 The step createSecureStore with step key |NW_Doublestack_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR .

Hi Kris,
Have you tried to change permission of the file as logs are showing ?
Check SAP Note 1257481 - SAP NetWeaver Inst. Based on Kernel 7.11: IBM DB2 for i which is not for your OS but similar error is described in that which is telling that by changing the permission you can proceed.
Thanks
Sunny

Global security settings do not save

Hello,
I'm using Flash version 10,0,12,36 on a new XP Pro 64bit
system. We are running Flash projects from a network drive which
works just fine on 32bit systems by allowing folder permissions in
the Global Security Settings manager. These settings will not save
on the 64bit version. The only reason I can think of is that the
32bit "program files" directory is called "program files (x86)"
which may not be what the player is looking for when attempting to
save the setting.
Is there a way to fix this?
Thanks,
Jason

It's cause the SP 2 sux, change the security settings and try again, in MSIE you can do this under the Edit or Tools menu.

This is what I get when I try to download my college text: This document requires global security policy to be disabled. Please go to Edit Preferences JavaScript and uncheck the "Enable global object security policy" checkbox. NOTE: In some versions

My college text is on my college website. When I try to download it this is what I get:
"This document requires global security policy to be disabled.
Please go to Edit > Preferences > JavaScript and uncheck the "Enable global object security policy" checkbox. NOTE: In some versions of Adobe Reader you may need to enable JavaScript first.
Message code: 005"
Help

matermax wrote:
Please go to Edit > Preferences > JavaScript and uncheck the "Enable global object security policy" checkbox. NOTE: In some versions of Adobe Reader you may need to enable JavaScript first.
And - did you?

JAVA global security settings

Hi All
I have web app that requires from users to have security set to medium on terminal server.
I created deployment.properties and configured:
deployment.security.level=MEDIUM
deployment.security.level.locked
Slidebar is locked ... but security is still set to high.
I set it to very high .... and it work great - it is very high and locked.
I also noticed that when i set slidebar to medium manually deployment.security.level=MEDIUM (whole line not only medium) disappears from deployment.properties in user profile folder\appdata\...
Installed jre is 7.21 (can got higher for now on).
Anyone know how to solve that?
Michał

I resolved this.
WSAD 5.0 is not a good xml editor i feel:
The values that i supplied through the admin console should be written in some xml file and it was unable to do so. Finally, i edited the xml files manually. this resolved the issue.

Global security policy disabled

Hi everyone,
I am using a PDF that is password protected. When I try to open the file I get a JavaScript window - Protectpdf - Error.
It states go to Edit > Preferences > JavaScript and uncheck the "Enable global object security policy" checkbox.
How do I get to this Edit window?
Oscar

matermax wrote:
Please go to Edit > Preferences > JavaScript and uncheck the "Enable global object security policy" checkbox. NOTE: In some versions of Adobe Reader you may need to enable JavaScript first.
And - did you?

Global Security in WSAD

Similar Messages

Maybe you are looking for