Global setting for audio track?

Is there a way to set the level for a particular audio track so that no matter what clip is edited onto that track it always reflects the same audio level?
For example: I post a lot of b-roll to a particular track so instead of setting the volume for each and every clip, I would like to set the level for the track.
Anyone know of a way to do that?

You can do it for the entire track AFTER you've placed all the clips in that track. Select all clips in the track and then go to Modify->Levels and enter an ABSOLUTE value. Any clips added to that track after the change will not be affected.
-DH

Similar Messages

  • Set default audio track for playback in Source monitor

    So I'm an editor that is somewhat new to the profession and I am working on a project right now with close to 100 video clips in my project. Most of the clips have their audio recorded to track 2 but when I load the clips into the source window to find the footage asked for in my script there is no audio playback.
    They play fine in the program monitor once placed in a timeline, because I have all the audio tracks are turned on until I do my mastering at the end of the project. To get audio playback in the source monitor I have to change the view option to audio waveform which shows a blank screen because there is no audio on track. I then go to the drop-down menu just below the video display and select track 2 at which point the audio waveform shows up and plays back fine. This isn't too arduous a process and isn't a great burden but it slows my workflow down considerably as I have to repeat the process for each new clip I load into the source monitor.
    My question then is if there is anywhere in Premiere that I can set which audio track is the default audio playback track for clips loaded in the source monitor. I work on a lot of similar projects like this for the same client and they don't have the most rigorous standards for their shooters. This problem has come up before and will most assuredly arise again in the future so any tips/advice on how to fix this on my end would be much appreciated.
    Thanks!

    I'm not really sure.I don't do any shooting for the client and in fact don't have any contact with the shooters, we just do the post. They use a number of different freelance videographers all of whom have different equipment and procedures when it comes to formatting, orginization, etc.

  • Can't enable recording for Audio tracks with H2 Zoom

    I'm running Logic Express 7 on a Macbook Pro Intel.
    I used to record vocals with the H2 Zoom as an external mic. But since I ran an update on Logic, I can no longer enable recording for Audio tracks for recording as soon as I connect the H2.
    Interestingly, it let's me only choose an H2 output driver.
    Connecting the same device to Garageband I can choose both, H2 output driver and H2 input driver.
    Anyone else facing this problem? Advice is greatly appreciated.

    You have to set it up using the aggregate device editor (utilities folder). In the utilities folder open AUDIO MIDI setup. From the menu select Audio>Open Aggregate device editor. Add a new aggregate device and name it zoom. Selelct H2 auidio in and H2 Audio out. Check the clock next to H2 Audio out only. Make the Zoom aggregate device you just created your default input in the systems setting area of the audio midi setup form. Close Audio Midi Setup and return to Logic. You may need to restart logic. You should now see "Zoom" in Preferences>Audio> Core audio> Device and you should be able to record using the H2.
    Hope this helps

  • Logic pro 9,record ready has gone for audio tracks,can't record now.

    I upgraded from Logic 8 to logic pro 9 back in october,everything was fine no probs.I have come back to record after a month away & now there is no record ready for audio tracks on any page,they're there for instruments & midi tracks.All else seems fine - just can't record! Also is there any way of getting help from apple,can't see anywhere to contact them without paying!! can anyone help with this?,tis the season of frustration....

    You have to select an Input device in the Audio preferences. Since Logic 9 you can assign different devices for In- and Output. So make a selection there and everything will be fine.

  • Audio level setting for music tracks in dance recital video project

    I am editing dance recital using the CD music tracks and editing in the audience clapping, some of the music tracks have lower audio level than others.
    I am setting up the audio levels between -3dB (for the lower audio tracks) up to -6dB (for the higher ones) including the audience clapping. I am making the adjustments by listening to the tracks on fixed output volume level.
    My question is if the final output (DVD) will have the the same adjusted audio levels I am hearing, or should I just stick to fixed level (-6dB) for all the tracks? If so is -6dB ideal for DVD output?

    Thanks for your reply Steve,
    I normally watch DVDs on different sound system than the TV, however, from your answer I gather you're setting the master level -18 to -20db. If it is so, are you setting the individual tracks below that, and in my case where the audio levels of the original music fluctuate from high to low, would you set them all on the same level or adjust to hear them out the same?

  • Sync Lock for Audio Tracks

    I usually have a lot of video and audio tracks going at the same time and run PP CS4.
    I have read and watched many video tutorials and one thing I read gave me the impression that with CS4, if I had sync lock set for all my video AND audio tracks, it would keep all my audio tracks in sync with my video when I edit the video or add video transitions.
    However I just performed an edit that moved a section of my original video and audio on the timline, and my second and third audio tracks just stayed right where they were and of course then were out of sync which I had to re-sync manually.
    Did I miss something in the explanation or do I have a setting wrong?
    For example if an edit on the original video and audio moved that timeline 30 seconds, I would want my audio track 2 and 3 move similarly which is what sync lock is supposed to do.
    If I could get this to work, it would help my editing immensely.
    Thanks,
    BJBBJB1

    I found this Adobe video that helped get sync lock and audio through my head that I thought I would post in case someone else runs into this thread needing help:
    http://tv.adobe.com/watch/digital-video/mapping-source-tracks-to-target-tracks
    Near the very end is when they finally get to it.  So clearly sync lock would work for insert editing, etc.
    However for my original issue of changing track lengths to say accomodate handles, or other "manual" clip length changes made once the clips are on the timeline, it appears that the group command is the way to go as Harm suggested.  Sync lock does nothing for me in regard to changing clip lengths once on the timeline.  Only when inserting clips.
    Just like with Photoshop many years ago, and my last NLE, clearly learning a good workflow for PP will serve me well in the future.  Clearly you want to make sure any clips you put on the timeline already have "handles" and also, if extensive length changes are needed, do that before you have multiple video and audio tracks piled up!
    Thanks to all for the help!
    BJBBJB1

  • Global Setting for ALV Table in webdynpro

    Hi guys,
    We are in process of upgrading to EHP7 and ABAP-7.4 and we are facing one small issue on default ALV table setting where we are not getting
    Grid line = 'All'  insist we are getting Grid Line = 'Horizontally'.
    I have seen lots of thread suggesting that we can customized it based on application but as we already have lots of webdynpro application and it not a good ideas to go in each and every application and change it.
    I have a feeling there should be some place where we can set the default setting for the same may be System or Global .
    Any idea on the same.
    Atul 

    hi,
    according to what i understood from your explanation you want that inspite of scrolling you need to do so on user clicking some button or some action ....
    i did the same in a scenario...
    what i did was just giving  a input field on the screen.
    and in code i just checked number of records to be less than or equal to the number user puts in the i/p field .
    I chose onactionenter for doing this .
    firstly i used node->invalidate.
    again filled the internal table with number of records matching and displayed the same.
    hope it will help
    Regards,
    Sahai.s

  • Global setting for decimal notation setting?

    Experts:
    Where can I set the decimal notation for all users? Is there a global default setting for this?
    I need to display numbers as xxx,xxx,xxx.xx.
    Each individual user can set this in their Maintain User Profile -->Default settings.
    But I need to have the system default for EVERY user to xxx,xxx,xxx.xx.
    Your assistance will be rewarded.
    Thanks
    Den

    Hi,
    Go to SU10 - Mass change. Enter all the User list and make the changes.
    Hope it will help u.

  • Global Setting for Running compatibilty mode in IE

    Is anyone aware of a global setting to do the x-UA-Compatible setting for a given SAP Server? We are having compatibility issues with SAP now that we have some apps outside that require it to be turned off.

    Hi,
    Use STANDARDS mode, you need to be on Netweaver 731 version; Please check the SAP Note: 1790704 & 1753544
    If not try this: Add the url parameter sap-ie=EmulateIE9 in the url, then it should work.
    Regards,
    Kiran

  • Entering tablature for audio track in Logic Express 9

    Hi,
    When recording an audio track in Logic Express 9, I'd like to manually enter tablature for the recorded piece. After reading the manual and some tweaking, I still have a couple of questions about this:
    1. It seems one can only enter tablature for midi tracks, so I end up adding a fake midi track, muting it, then entering tablature on that midi track. Is there an easier approach?
    2. Is there a way to enter whole chords at once in the tab track instead of first having to enter each note of a chord separately, then copy/pasting that chord to all places I need it? (I know one can add chord symbols, but these are just text symbols that do not have rhythm notation.)
    3. It seems that the tablature editor in Logic Express supports only a limited number of fingerings, i.e., one cannot add a note on the 6th fret of the 6th string, as this is automatically turned into the 1st fret on the 5th string. Can this be changed?
    Any help appreciated!

    Hi,
    To answer your questions,
    1. I'm sorry, but there is no easier way. Since the "audio to score" function (where you let Logic interpret the notes in the audio and makes midi out of it) hasn't fully matured yet, I don't think there's an easier approach.
    2. In the environment you can add a chord memorizer. With this function you can Logic tell to put in a (for instance) C-chord when you hit just the C-note on your midi keyboard. Since I used this function just once and I'm not anywhere close to a Mac with Logic I can't tell exactly how this works right now.
    3. You can change the position of a note on the tablature by changing the note's MIDI channel (in the inspector).

  • Clip name burn-in for audio track

    OK, I know about the Clip Name burn-in for video clips, which requires the effect to be applied to every clip.
    What I really need is something that will do the same for an audio clip - so that I can export video which shows which audio is being used. Or, ideally, displays the clip name for a nominated video or audio track.
    Does anyone know of any plugins which can do this?
    Thanks

    dido this request

  • "MIDI thru" box for audio tracks... what is it for?

    Hi Guys
    Sorry for this possibly quite obvious question... when I create audio tracks that have nothing to do with MIDI, why is it that the inspector column on the left still has a section for "MIDI thru"? Is this for use with control surfaces that use MIDI channels to control paramaters on an audio track, or... for something else?
    And is there a way to get rid of these all together, so that each audio channel isn't paired to a MIDI channel?
    Apologies if this is a silly question!
    Cheers,
    Mike

    yeloop wrote:
    Apologies if this is a silly question!
    Cheers,
    Mike
    If you don't know the answer then it's not a silly question.
    You're simply seeing a connection where none exists. The Region parameter box will display the parameters of any selected Region(s). When no region is selected the region parameter box displays the "MIDI Thru" parameters.
    Now, if you create some more tracks (Midi, Audio or whatever) and haven't selected any region then the Region Parameter box will still show the (same) Midi Thru parameters. It has nothing to do with selected Tracks only selected Regions.
    The Track Parameter box displays the parameters for the selected Track.
    The region parameter box displays the parameters for the selected Region.
    HTH,
    R.
    Message was edited by: Rodger Hammerstein

  • No plug-ins for audio tracks other than 1-4

    I have a problem. I am wanting to record mulitple audio tracks and use plug-ins, this is fine for tracks 1-4, however any other audio tracks don't have the 'R' button in between the solo and mute buttons and the channel strip panel on the left hand side has no inserts, sends I/O button or anything!
    I called the logic helpline but they were no good at all, if anything they were down right rude towards me so I wouldn't sugegst phoning them any time soon!
    Anybody got any suggestions that'd be great as I am currently doing my university coursework and this is kinda vital!

    Clang - you do come across as rude. If the person
    wanted to read the manual - yep you guessed it - they
    wouldve already done that. Telling users on here to
    RTFM is useless, and is pointless as well. Forums are
    all about helping each other, some people just want
    to get their answers this way, and there's really
    nothing wrong with that. Its the spirit of being
    supportive - thats what this place is all about.
    Please dont tell anyone else here to RTFM, that
    doesnt work at all mate, and comes across as hostile.
    I see a pattern evolving from the mist...you are afraid of the letters:
    RTFM!!!
    Now,ask yourself,how did your post telling some other guy off about the RTFM,help the OP?? In no way.That's how.I might be rude,I might have a sarastic sense of humour,but I never tell posters to not read the manual.It's there for a reason.Many trees died so that the manual could be there for them.At least respect those poor dead trees.
    (More sense of humour...) :P
    Cheers

  • Record button only available for AUDIO TRACK, not for AUDIO INST.

    Hi -- For some reason Logic Express 7.1.1 is only giving me the opportunity to record enable tracks that are AUDIO TRACKS. All of my other tracks (mainly software synths) using the AUDIO INSTRUMENTS don't have the ability to record.
    I opened previous files where I'd recorded on these tracks, but even on older files, the option still is not there.
    Any thoughts?
    As for setup, I just have an MAudio keystaton attached via USB, and it's playing the software instruments fine. Also, I sometimes have an MBox hooked up (although not right now.) I updated this recently for TIGER, and I didn't know if this messed it up.
    Powerbook G4, 1.5 GHz   Mac OS X (10.4.5)  

    don't know if on Logic express there's the key command 'Capture Last Take as Recording'.
    If yes,during playback you can play anything you like on your keyboard and by pressing the keys that you have assigned for this key command you can have everything that you played as events on the specific audio instrument as if you were in record mode.
    If you move the SPL the new information will delete the previous one.
    powerbook G4   Mac OS X (10.4.5)   logic pro 7.1.1,FW410 m-audio

  • Transfer Global setting for Currency

    Whenever a new currency gets added in the R3 source system, what needs to be done to get them added in BW?

    Hi,
    Try using  the below steps:
    1) Go to RSA1 --- Source systems
    Right click on the source system from which you want to update the currency in the BW system, and click on Transfer Global Settings
    2) Execute it with the following selections:
    Transfer Global Settings--Currencies
    Mode--Update Table
    3) This will update the u201CTCURCu201D table in BW system with the currencies defined   in the source system table
    4) Go to the transaction SE38 and execute the program u201CZBWRSIMPCUSTu201D
    5) Select the source system and run the program with following selections:
    Global table settings--CURRENCY
    Mode as --Update table
    6) This will update the u201CTCURCu201D table in BW.
    Running above program for BW is necessary, because adding new currency definitions in the BW system will deviate the ISO code settings for the TCURC table.
    ISO code is the standard worldwide currency key. Thus it should be unique.
    Above program will assign the unique currency key to the ISO code.

Maybe you are looking for