Global signature can't be overridden

We've implemented global signatures, but some people need to be exempt
from having them appended. However, setting the user to have "None"
doesn't work - the signature gets tacked on anyway. According to the
documentation, this is not as designed. Does anyone know how to make it
work properly?

On 2/25/2015 4:17 PM, Andy Konecny wrote:
> In article <HdrHw.4653$[email protected] >, Mary Wood
> wrote:
>> After a day or two, that signature started getting
>> slapped right back on those who were set to "none."
> Sounds like one of the nightly jobs is pushing it back, "thou shalt have
> THIS signature". I wonder if it shows at all in the logs that it is
> being reset, either the POA logs or the GWChecks that may have been run.
> If that doesn't reveal anything and nobody else has anything to add, I
> think you are in SR territory. I've only dealt with the global sigs as
> truely global.
>
Oh, that's something to keep an eye on. Thanks for the suggestion!
>
>> What the heck?
> Perhaps it is that 'wonderfully' cool weather we've been dealing with.
> Is the part glove you have on in your Linked-in picture needed inside
> nowdays?
It is indeed. My coworkers giggle at my wearing a snuggie in the office,
too, but I believe they are secretly envious.
>
>
> Andy of
> http://KonecnyConsulting.ca in Toronto
> Knowledge Partner
> http://forums.novell.com/member.php/75037-konecnya
> If you find a post helpful and are logged in the Web interface, please
> show your appreciation by clicking on the star below. Thanks!
>

Similar Messages

2012 Global Signature

I know this question has been asked before, but management want me to query if we are missing any changes in the newer versions
This issue is with what management calls signature stacking at the end of the email thread.
Is there a switch in 2012 or 2014 to not apply Global signature upon a reply to an email?
I understand that the composer in 2014 is changed to show the signature, can it be deleted at this time?
Thanks
Dan

Hi Dan,
There is no switch that I am aware of that will solve the problem as you describe it.
Cheers,

Global signature help

I have 3 different ones set up. I'm working with Novell as far as
getting any changes to affect *all* emails without doing post office
rebuild, but I have another issue I'd like to see about getting some
help.
I can't seem to get these signatures to 'act the same' on emails. I've
had complaints about too many spaces, etc between the email and
signature, so I'm trying to resolve this.
If I take all the blank lines out of the top of the signatures,
sometimes they will continue the last line of the email if the user did
not hit <enter> at the end of their email.
Also, the signatures have one blank line at the end of them, but on
some emails they add 2 or 3 blank lines after the signature.
I created & edit these in ConsoleOne as we're running GW2012sp2 (from
March 2013). Clients are mainly win7 64bit at the same patch level.
What gives? What can I do to get these to look the same on all emails?
Stevo

Hi Stevo,
Several years ago I had issues with signatures not looking right - similar to what you are experiencing. It was also very sporadic. It was specifically the HTML signature, the text one seemed to work fine.
After logging an SR with Novell we discovered that it was corruption in my ConsoleOne snapins. I redid the snapins, deleted and recreated the signatures and have never had a problem since. Admittedly we only apply global signatures to external mail.
It probably won't hurt to recopy your GroupWise snapins back to your management PC/Server where you are running ConsoleOne.
This is just my experience with signatures not applying correctly and might not apply to you.
Cheers,

Global Signature question

I am in the process of applying a global signature. While, I know that I can apply it to the PO, I would rather apply it on the user level. Is there a way to set multiple users Client Options to use the sig rather than opening each user and changing their options individually?

Oops. Posted in the wrong category. I don't need GWIA assistance :)

Global Signature - Image Size Limit

Hi.
Groupwise 2014
We are trying to create a global signature and keep having the management console crash quite often which is fun, and it...

Hello,
just a little question. If I move a user in our Active Directory, I have to "synchronize" the user in GroupWise-Admin otherwise the LDAP-DN...

Global signature for HTML email

GW7.0.3 on NW 6.5--global signature appends for plain text email, but does
not append on HTML outbound email. Signature is defined for both formats in
the Global signature in ConsoleOne and I am not using any jpeg images. Any
direction appreciated. Thanks.

PatM,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Global correlation can't updated

version is IPS7.0, asa5520-aip-ssm.
Singatrue and IME can be sucessfully updated,
Global correlation can't updated,
the Status of global correlation is Critical.
I saw the website
http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/ime/ime_collaboration.html#wp1053280
and updated following the web page. But can't work it.
How could I update global correlation
or go back old sensorbase?

The output provided clearly indicates that the AIP-SSM is unable to resolve the update server address. The server name update-manifests.ironport.com is not user configurable.
Do you have more than one DNS server configured? If so, disable all but the primary DNS server.
If you only have one DNS server configured, please verify the AIP-SSM's management IP address has unrestricted access to the Internet. (At a minimum TCP ports 80 and 443 and UDP port 53).
Scott

Collect signatures workflow - Signatures can't be added or removed because this document was opened read-only

Hi, I have configured a "Collect Signatures" workflow for test Word document(.docx), then uploaded it to sample SP 2010 doc library (content type "Document"). This Word document has 2 empty Signature Lines in it.
After that i'm starting the Collect Signatures workflow on it , which is assigned to me and other user from my Active Directory.
Workflow is started and after that i'm receiving mail about assigned task which also contains link to document.
When i click on link it opens IE which contains SP library file path, after a while doc is opened in Word client in Read-only mode. When i want to sign the document info window pops up : "Signatures can't be added or removed because this document was opened
read-only" and i'm not able to compete task/sign doc from Word.
It is possible to sign the document when i go to SP library and opens this file directly from there (file drop-down menu-> open in MS Word).
I saw that this behaviour is similar to this article:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/31ba43ec-b04e-428d-9a66-0cc571934197/collect-signatures-workflow-using-firefox-not-showing-workflow-task-this-document-requires-your?forum=sharepointgeneralprevious
but i'm using IE so it shouldn't be Active X issue.
I have also checked this MS Fix:
http://support.microsoft.com/kb/2661910
but changing CA settings to Permissive didn't help
Any ideas ?

Hi bezcisnien,
I could not reproduce this issue.
When you open this file directly by clicking the document Name link from SharePoint library, is there a
yellow message bar in Word document?
Did this happen to all users on all PCs?
Have you checked if it is a client side issue, test with different IE 8/9/10 versions for this issue (and IE compatibility mode, add-ons, trusted site zone etc)?
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Howto enforce Global Signature for emails written with WebAccess (8.0.2.hp2, OES2)

Hi.
The global signature [1] is working fine, when emails are created using the Windows
GWClient.
When webaccess is used, it's *NOT* added. What do I miss?
Thx, Rudi.
[1]
C1, mark GW-Sytem.
Tools, GW system operations, global signatures.
create a global signature.
settings: select this global signature.

Originally Posted by Rudolf Thilo
Hi.
The global signature [1] is working fine, when emails are created using the Windows
GWClient.
When webaccess is used, it's *NOT* added. What do I miss?
Thx, Rudi.
[1]
C1, mark GW-Sytem.
Tools, GW system operations, global signatures.
create a global signature.
settings: select this global signature.
You need to set it at the GWIA: Novell Doc: GroupWise 8 Administration Guide - Adding a Global Signature to Users’ Messages
Thomas

Global Signature

Hi,
We have GW 8.01 on Netware OES.
We want to be able to set up Global Signatures so that they appear
both internally and externally. This works well from the Windows
client. I have also set Global Signature on the GWIA and it works on
external mail but does not work on internal.
Is there a way to get a global signature to work from web access to
our internal users?

Richard,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

I already have itunes but when it goes to update it says "invalid signature" can anyone help?

I already have itunes but when it goes to update it says "invalid signature" Can any body help?

Try manually downloading and installing the newest version from here.
http://www.apple.com/itunes/download/
B-rock

If I uncheck "Available For Tagging" from a global termset can I still access it programmatically?

If I uncheck "Available For Tagging" from a global termset can I still access it programmatically? The answer would appear to be "No". I have a console app that uses
TaxonomySession session = new TaxonomySession(site, true);
var termStore = session.TermStores[0];
termStore.UpdateCache();
var group = GetTaxonomyGroupByName(termStore.Groups, "Global Termsets");
TermSet globalTermSet = group.TermSets.FirstOrDefault<TermSet>(e => e.Name.Equals("My termset", StringComparison.CurrentCultureIgnoreCase));
OR
TermSet gts = group.TermSets["My termset"];
If I uncheck "Available for Tagging" this this fails. When I re-select "Available for Tagging", it works.
Obviously, this is the way SP is designed (I think) but my question is
why? I don't want my navigation termset being used for tagging. I have a different termset for that. This suggests that tagging also controls api visibility to the termset. Is this something that other experienced developers can comment on?
Thanks!

The only way to get to the unavailable terms is through the session.GetTermsInDefaultLanguage, GetTermsInWorkingLocale and GetTermsWithCustomProperty. All three of these methods offer arguments to exclude or include unavailable terms. You can also call these
methods on the TermSet its self.
https://msdn.microsoft.com/en-us/library/ee568627(v=office.14).aspx
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

Apple tv2 no signatures, can't update

Repeatedly failed to update reporting this device is not eligible for requested build.
Downloaded "tinyumbrella" and it reported no signatures to save
Anything I can do?

I had tried the USB connection and it had the same result.
It seems to be in a "catch 22" trap with these signatures.
Apple has managed to render my product obsolete.
Not happy.

HT1926 why PC says "invalid signature" can't install itunes update?

Trouble updating itunes. Message says "invalid signature" and aborts updating. How do I fix?

You can try manually updating by uninstalling the current version you have and going to http://apple.com/itunes/download

Pkgmap files missing in global zone, can't build non-global zone

My solaris 10 server is missing the pkgmap files for the packages. As a result, I can't build a non-global zone. Is there a way to recreate the pkgmap files?
The OS on the Solaris 10 server was installed via jumpstart (initial install). However, the Jumpstart process used a Solaris 9 boot server which seems to have caused the missing pkgmap problem.
Does anyone know of any other problems which would result from a version mismatch between a boot and installation server during the jumpstart process?

Hi, i have problems with building transmission from svn too:
$ versionpkg
==> retrieving latest revision number from svn... 3730
==> newer revision detected: 3730
==> Entering fakeroot environment
==> Making package: transmission-svn 3730-1 (Di 6. Nov 08:28:38 CET 2007)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Validating source files with md5sums
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Starting build()...
Fetching external item into 'Transmission/third-party/libevent'
Checked out external at revision 477.
Checked out revision 3730.
==> SVN checkout done or server timeout
==> Starting make...
./autogen.sh: line 16: autoreconf: command not found
Creating aclocal.m4 ...
Running glib-gettextize... Ignore non-fatal messages.
Copying file mkinstalldirs
Copying file po/Makefile.in.in
Please add the files
codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
progtest.m4
from the /aclocal directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.
Making aclocal.m4 writable ...
Running intltoolize...
PKGBUILD: line 33: ./configure: No such file or directory
make: *** No targets specified and no makefile found. Stop.
==> ERROR: Build Failed. Aborting...
==> ERROR: Reverting pkgver...
i dont know whats up with the autoreconf
i hope anyone can help me!
greez

Global signature can't be overridden

Similar Messages

Maybe you are looking for