Global SNP settings could not be read

Hello Gurus,
We are currently upgrading our system from SCM4.0 to SCM5.0.
Whenever I call SNP heuristics a message appears stating that "Global SNP settings could not be read" I have looked into the note 692369, however, we havent migrated to production yet.
Could anyone please help me on this?
Thanks,
Sai

Hi Bala,
Are you putting anything in the Global SNP Setting Profile field. If Yes, you have to define the profile in <b><i>SNP Customizing under Maintain Global SNP Settings</i></b>. After defining, anyone of these is to be activated.
Regards,
Manjit

Similar Messages

A Global Catalog Server could not be located - All GC's are down SBS 2011

I have been searching through these forums and manage to find similar errors but am struggling to find an answer that applies to this me.
I seem to be having a number of issues with our SBS. I believe this was originally domain was previously on a SBS 2003 box before being moved to this SBS 2011 box last year, it has been running fine until yesterday. I cant see anything that has changed then
though.
Everything seems to point to DNS although I am struggling to pinpoint the actual cause. The most worrying is when I try to open something on the SBS such as AD sites and services.
the error is
Active Directory Domain Services - Naming information cannot be located because: The specified domain either does not exist or could not be contacted. Contact your system administrator to verify that your domain is properly configured and
is currently online.
Here is the IPconfig/all from the server
v
Host Name . . . . . . . . . . . . : SBS2012
Primary Dns Suffix . . . . . . . : Contosso.local
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Contosso.local
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82575EB Gigabit Network Connecti
on #2
Physical Address. . . . . . . . . : 00-1E-67-39-23-14
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8087:34f0:59f9:6a26%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.35.250(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.35.1
DHCPv6 IAID . . . . . . . . . . . : 301997671
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-39-46-22-00-1E-67-39-23-15
DNS Servers . . . . . . . . . . . : 192.168.35.250
NetBIOS over Tcpip. . . . . . . . : Enabled
PPP adapter RAS (Dial In) Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : RAS (Dial In) Interface
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.35.24(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{6E06F030-7526-11D2-BAF4-00600815A4BD}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{A23E95B8-B5C2-4D88-BDE9-E9F1C2DD3902}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
and here is the nltest
nltest /server:sbs2012 /dsgetdc:contosso.local
DC: \\SBS2012.contosso.local
Address: \\192.168.35.250
Dom Guid: c50b6df3-9d22-4c87-b2a7-adadc4fd5ec1
Dom Name: contosso.local
Forest Name: contosso.local
Dc Site Name: Default-First-Site-Name
Our Site Name: Default-First-Site-Name
Flags: PDC GC DS LDAP KDC TIMESERV GTIMESERV WRITABLE DNS_DC DNS_DOMAIN
DNS_FOREST CLOSE_SITE FULL_SECRET WS
The command completed successfully
As far as I can see everything so far looks ok (highly possible I am missing something) but when I run a DCDIAG it gets messy
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = SBS2012
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\SBS2012
Starting test: Connectivity
......................... SBS2012 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\SBS2012
Starting test: Advertising
Fatal Error:DsGetDcName (SBS2012) call failed, error 1355
The Locator could not find the server.
......................... SBS2012 failed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SBS2012 passed test FrsEvent
Starting test: DFSREvent
......................... SBS2012 passed test DFSREvent
Starting test: SysVolCheck
......................... SBS2012 passed test SysVolCheck
Starting test: KccEvent
......................... SBS2012 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SBS2012 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SBS2012 passed test MachineAccount
Starting test: NCSecDesc
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=DomainDnsZones,DC=Contosso,DC=local
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=Contosso,DC=local
......................... SBS2012 failed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\SBS2012\netlogon)
[SBS2012] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... SBS2012 failed test NetLogons
Starting test: ObjectsReplicated
......................... SBS2012 passed test ObjectsReplicated
Starting test: Replications
[Replications Check,SBS2012] DsReplicaGetInfo(PENDING_OPS, NULL)
failed, error 0x2105 "Replication access was denied."
......................... SBS2012 failed test Replications
Starting test: RidManager
......................... SBS2012 passed test RidManager
Starting test: Services
Could not open NTDS Service on SBS2012, error 0x5
"Access is denied."
......................... SBS2012 failed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:27:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:32:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:37:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:42:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:47:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:52:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:09
Event String:
Driver EPSON WorkForce 645 Series required for printer EPSON WorkForce 645 Series is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:10
Event String:
Driver FX DocuCentre-IV C2270 PCL 6 required for printer scanner - 212 Manukau Rd Epsom is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:10
Event String:
Driver HP ePrint required for printer HP ePrint is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:11
Event String:
Driver PDF Complete Converter required for printer PDF Complete is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:14
Event String:
Driver Send To Microsoft OneNote 2010 Driver required for printer Send To OneNote 2010 is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:57:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:02:33
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
A warning event occurred. EventID: 0x00002724
Time Generated: 07/12/2013 09:03:32
Event String:
This computer has at least one dynamically assigned IPv6 address.For reliable DHCPv6 server operation, you should use only static IPv6 addresses.
An error event occurred. EventID: 0x0000041A
Time Generated: 07/12/2013 09:03:33
Event String:
The DHCP/BINL service on the local machine encountered a network error. The error was: 0x 2.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:03:33
Event String:
The DHCP/BINL service on this computer is shutting down. See the previous event log messages for reasons.
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:45
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0x00000406
Time Generated: 07/12/2013 09:07:33
Event String:
The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when Group Policy is successful.
An error event occurred. EventID: 0x00000406
Time Generated: 07/12/2013 09:12:34
Event String:
The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when Group Policy is successful.
An error event occurred. EventID: 0xC00038D6
Time Generated: 07/12/2013 09:16:24
Event String:
The DFS Namespace service could not initialize cross forest trust information on this domain controller, but it will periodically retry the operation. The return code is in the record data.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:17:34
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:22:34
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
......................... SBS2012 failed test SystemLog
Starting test: VerifyReferences
......................... SBS2012 passed test VerifyReferences
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : Contosso
Starting test: CheckSDRefDom
......................... Contosso passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Contosso passed test CrossRefValidation
Running enterprise tests on : Contosso.local
Starting test: LocatorCheck
Warning: DcGetDcName(GC_SERVER_REQUIRED) call failed, error 1355
A Global Catalog Server could not be located - All GC's are down.
Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
A Time Server could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error
1355
A Good Time Server could not be located.
Warning: DcGetDcName(KDC_REQUIRED) call failed, error 1355
A KDC could not be located - All the KDCs are down.
......................... Contosso.local failed test LocatorCheck
Starting test: Intersite
......................... Contosso.local passed test Intersite
I found a few people who have had similar issues that was caused by the "netlogon" service being paused or stopped but in my case it is set to automatically start and is running.
I have also posted this to serverfault (cant post links yet serverfault.com/questions/522691/a-global-catalog-server-could-not-be-located-all-gcs-are-down) added as there may be info there that may help.
Thanks for taking the time to read this, hopefully someone out there has come across this before or can offer something in regards to the next steps I should take.

Some troubleshooting ideas:
0. Check if the DCs can resolve each other using their DNSHostName. If not, this indicates some DNS misconfiguration
-- you need to fix that first.
1. Check if the both the DCs are pointing to the same DNS server (or DNS servers that are replica of each
other). Run: "ipconfig /all" and check its output. If not, correct the DNS client settings and run dcdiag after sometime.
2. Check if dynamic updates are "turned on" on the DNS server.
3. Try re-registering the DCs SRV records by either restarting netlogon service or by running the following
command:
nltest.exe /dsregdns

Cannot sync, error message "could not be read" for an iPod no longer in use

I have two problems. I upgraded iTunes to 7.2 and the very next morning my iPod died. It is completely unresponsive. Maybe it's coincidental. So I bought a new 80 gig iPod and gave it a different name than the old dead iPod. Now when I try to sync the new iPod, it goes for about 10 minutes, then it fails with this message:
Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer! Somehow, minutes into syncing, iTunes has forgotten which iPod it is looking at. I have seen the article about the "cannont be read" message and it is not relevant. I need to make iTunes forget about the old dead iPod so it will stop looking for it. I've tried removing the files from "Documents and Settings" but iTunes still remembers the old unit. Where else does it store information? Any recommendations?
Windows XP

Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer!
Okay, that can sometimes be caused by a Windows drive letter confusion. For troubleshooting advice on that possibility, see the following document:
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

9.1.1 sync problems: "The disk could not be read from or written to."

Using OSX 10.6.3 and upgraded to iTunes 9.1.1. Once I did, I keep getting the following error message: "Attempting to copy to the disk [my ipod] failed. The disk could not be read from or written to." This is followed by another error message: "iTunes could not copy {name of file} to the iPod {iPod name} because the file could not be read or written."
I tried deleting the files mentioned in the error message, but then the message returns with the name of a different file. At this rate, I'll be deleting all my files!
I tried checking everything on the Knowledge Base article: http://support.apple.com/kb/HT1207
I tried restoring my iPod (twice), but it didn't help.
All my software is up to date. I haven't added any new software since I upgraded iTunes.
NOW...when I try to sync my iPhone, I get the same error message.
What's going on, and can anyone help?
This is very annoying since I can't sync my iPhone which I need or my iPod which I would like.

ArizonaDAK wrote:
"iTunes could not copy {name of file} to the iPod {iPod name} because the file could not be read or written."
check if you have read & write permissions for your iTunes music folder. in finder, right-click on it and +get info+. unlock the little padlock (you may have to enter your admin password) and change the permission settings. next, click on the little gear-shaped icon and +apply to enclosed items+ like so
you may also give everyone read & write access. if this doesn't help, try the same on your iTunes folder (not just the iTunes music folder).
if that make no difference, try reinstalling iTunes. click here and follow the instructions. next, download a fresh copy from here: http://www.apple.com/itunes/download/.
you might also try to _*remove and reinstall the Apple Mobile Device Service*_
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

2G Shuffle error "disk could not be read from or written to"

Just recieved a 2G as a gift. First sync went fine. Songs transferred without issue. Wanted to change some settings and re-sync with new songs and got the error message "disk could not be read from or written to".
Have tried on an XP64 and a Windows 2000 machine with same error. I can sync from an XP Pro Laptop fine. All three are using the same driver (USBSTOR.sys).
Need some help trouble shooting this issue. The XP64 is my main computer and is the one I would like to solve this issue on. I also have a 30GB iPod that syncs on the XP64 machine with no problems.

I don't think the Apple store folks will be able to do anything because the issue is not with every computer.
The fact that I have a computer that can sync with the Shuffle without errors tells me there is an issue with the other 2 machines. As I cannot use the Laptop as my primary library I would like to solve the issue.
I still suspect either iTunes itself or the driver. If anyone else has any suggestions please share them.

Can't sync to iPod: The disk could not be read from or written to.

I recently installed a new operating system (Windows XP with service pack 2), and then downloaded the latest version of iTunes. The next time I hooked up my iPod (3rd gen.)to sync it, iTunes removed all of the music that I'd purchased on iTunes, and i was unable to sync it back on. Then every time I opened iTunes to try again, my computer would freeze (but only when on iTunes). I used the restore function to restore factory settings, so now there is nothing at all on my iPod and when I try to sync, it gives the above message (The iPod cannot by synced. The disk could not be read from or written to). Any suggestions for how I can fix this problem?
Thanks!

Have you had a chance to look at this troubleshooting page? It may be of some help: "Disk cannot be read from or written to" when syncing iPod

Error: File just captured could not be read and was deleted after capture.

I was just recording an extremely important interview. I have recorded literally 10.000 recordings before with the same setup, every day, over a period of some three years now. I'm recorging DV PAL through SDI input on a AJA KONA LS card.
It seemed to be going well last night while recording but as soon as I pressed 'Esc' to end the capture I got an error message saying (not exactly in these words) : Error: The file just captured could not be read.
The file couldn't be found anywhere on the HD or in the trash. Usually when something goes wrong during capture, you can find the file in the capture folder named 'filename-av'. Not this time, I have never seen this error message before.
The person being interviewed was absolutely furious and said he would not do the interview again. So I'm up against the wall here, and need to recover the files.
What's more, the problem still persists. When I try capturing again, as soon as I stop the same error occurs. So now my FCP is not capturing anymore
I tried running Data Rescue 3.1 and found the recording in deleted files, but:
1. the recording is in several parts (not sure if it's all there, but probably most of it)
2. Data Rescue 3 interprets the files as .dv files, as opposed to .mov files as all my other recorded material.
3. THERE IS NO AUDIO IN THE .DV FILES, which pretty much nullifies the file recovery altogether.
I tried googling this error, but it did not help much:
1. None of the people were capturing the same way I do (most were capturing from tape, none straight through KONA SDI input)
2. There was no solution to prevent the error.
3. No solution to recover the files either.
I must say, this experience really taught me the essence of Murphy's law: 'Anything that can go wrong, will go wrong at the worst possible moment'
Any suggestions as to the reasons for this?
Any suggestions as to how the files can be recovered?

Good news!
I beleive I have found the cause and solution. At least now I am able to reproduce the problem at will and therefore, hopefully prevent it.
I discovered that there is nothing wrong with my AJA KONA setup, as I was able to capture with both QuickTime movie capture and Adobe Premier just fine. But every time I try capturing in FCP I get unreadable capture files (since 2 days ago).
Trying all possible capture settings, capture presets or easy setups did nothing. (although capturing thru Firewire still works every time).
I was about to give up when I noticed that where I usually have my video scopes window running, for convenience sake, under it the Voiceover utility was running.
So here is the deal: Usually when you try and capture with the Voiceover utility running, you can't. FCP wont allow you to capture, it will return an error message saying: 'Log and capture can not be opened while Voice Over is running. Please close Voice Over and try again.' As it turns out, this warning is probably for a good reason.
BUT...
If you shut down FCP with Voice Over running and start it up again THEN you CAN run Log and Capture at the same time... everything looks OK, until you stop the recordin, then you get an error message saying your recording is screwed.
I tried this over and over again, every time it behaves the same way. Shutting down with VO util>starting up again>recordings get screwed .. close VO utility>back to normal operation.
I'm not sure if it was the VO utility the last time this happened (few weeks back), but it might very well be. I might not have noticed that the VO utility was running as it was hidden behind the videoscopes and there are no warnings when running Log and Capture if you start up FCP with VO utility still running.
My educated guess to what is going on is that the VO utility is taking up priority over the sound inputs and by doing so making the audio of the capture unreadable. This theory is supported by the fact that when my data recovering experts found the recordings on the HD, there was no audio on the files, but the video was intact.
The only reason setting up the AJA drivers helped in the past was probably because that flushed the FCP settings and in doing so closed the VO utility window. How very ironic
Hope this helps someone out there. And I hope Apple find a way to prevent this from happening.
cheers!
Vidar F.

Service Desk: Pricing data for partner could not be read

Hi all,
I am trying to configure the Service Desk functionality for Service Providers (on EHP1).
I follow the SAP Documentation (SAP Solution Manager: Service Desk for Service Providers) and SLA's made easy in SAP Solution Manager. Also some discussion threads helped me with some steps (I applied e.g. the recommendation from Pricing data for partner 106 could not be read. , but it didn't help).
I am facing some errors related to the CRM part of the configuration.
When I create Service Desk Contract (SLFV) in CRMD_ORDER, the error appears Pricing data for partner xxx could not be read. I checked the setting of BP and I am not able to find the reason, for customer's (sold-to-party) BP the sold-to-party > Sales Area Data the Sales Organization/Distribution Channel/Division are maintained. Which information for pricing is needed and where can it be configured?
Another error - I am sure it is related to the first one - the service contract cannot be determined in the service message (in Item details view under product). The error messages are about sales area/organization, so I suppose there is something wrong with the link Service Contract -> Business Partner definition.
Could you please help me what can cause the error?
Thanks in advance,
Vaclav

Hi Balaji.S,
my problem was solved when I double checked the settings of org structure. That means there must be a consistent setting for sales organization / distribution channel / division in businness partner (tcode BP), organizational model (PPOMA_CRM), product workbench (COMMPR01). The setting must be same for both the sales department of the service provider and the customer's company (I am sorry I am not CRM, so I am following just this simple logic)
In the long text of the error (in CRMD_ORDER) I could see "expected" combination for sales organization / distribution channel / division (message e.g. The access was carried out with sales organization 'O 50000613', distribution channel '01' and division '') -> when the org model was set up everywhere in this way, the contract was automatically filled by the organization data and in the next step the contract could be determined in the service desk message.
Anyway it took some time to find out the correct combination. Deeper CRM knowledge would help me much.
Vaclav

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
Thanks, Rick

The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up?

Download error "source file could not be read" when closing tab.

So it seems like when I start a download by clicking a link on a website and I close that tab before the download finishes I get a download error and the file stops downloading.
I first noticed this on some site and thought it was a problem with the site, but then it happened again when I went to download the Flash update.
[http://img818.imageshack.us/img818/3015/screenshot20110605at235.png Screenshot of the error message]
When I run Firefox with add-ons disabled (thanks for the handy menu item) the problem does not occur.

Whats the problem with this thing?
One thing i can tell is that i changed some settings in Micromedia Flash, because i learned that they where spying on US, then boom no more download. It stops and tell me it could not be read from the server. Dont remember if it started right after i changed the settings, but its driving me nuts
dang

IOS5 disk could not be read from or written to??

After 3 times of trying to upgrade to iOS5, the download reaches the processing files stage. The download stopped and a message appeared saying "There was a problem downloading the software for the iPhone. The disk could not be read from or written to. Make sure your network setting are correct and your network connection is active or try again later. I have tryed both waiting and my network is connected. Can anybody out there help me? It would mean a ton. Thanks.

Same problem - I left it for a good week to upgrade as per general internet instructions and I'm now getting this error message:
Never had IOS upgrade probs before and I've had 3G, 3GS and now 4.
There's nothing wrong with my network settings or connection. It seems from my quick internet trawl this afternoon that this is a very common problem with iPhones, iPads and iPods, so I wonder why Apple hasn't put out a patch/fix to sort this...
Suggestions please?
Many thanks
Helen

The disk could not be read from or written to----help please!!

Hey, I'm sorry if this has been posted numerous times, but I really need some help. Everytime I plug in my 30 gig 5thG ipod, I'll start to load songs on (either manually or automatically) and this message will pop up after about 50-100 songs have been loaded: "Attempting to copy to the disk, "ITIM" failed. The disk could not be read from or written to." This used to happen only once in a while, but now it's happening all the time. My ipod has no problem being recognized by itunes and the songs I have on it show up fine. It's a pain to load my library at intervals of 100 songs because I have about 6000 songs. I've also tried reseting my ipod several times, which doesn't seem to help at all. Any help would be greatly appreciated.

That article mentions other things also, like any anti virus software you may have. You could try turning it off.
It also mentions damaged song files.
In truth it could be a lot of things, and it's curious that you say this used to happen once in a while.
It could be also be a problem with the cable or even the iPod itself.
I take it you've tried restoring the iPod?
See: How to restore the iPod to factory settings.
I don't know what iScrobbler is, but any software can interfere with the workings of the iPod (delicate and fussy little creatures that they are).

The ipod cannot be synched. the disk could not be read from or written to?

So I've done everything possible to try to get my touch to sync all my songs from my itunes library at once and nothing is working. So sadly i spent the entire day plugging and unpluggin the usb cord because at most i could put 30 songs on my touch before it came up with the error "the ipod cannot be synched. The disk could not be read from or written to." this is very frustrating as i have many videos i purchased on itunes with anticipation of putting them on my touch but if i try to do so at most it downloads half then it pops up with the same error. If anyone of y'all can help, that would be greatly appreciated i'm slowly but surely giving up on the touch all together even though i love it this error to it is very time consuming and annoying.

Same problem. With an iPod Touch.
This began after I accidently pulled out the USB before it was fully ejected. (I hit eject, and the icon vanished from iTunes, so I THOUGHT I was okay...) But I got the error. And since then, I've got the error you speak of. Mine may be a tad off.
When I drag a song from iTunes or the Finder into the iPod it copies fine but then the error pops up.
But now it's fixed, and I'm not sure why. And I'm hoping it doesn't come back.
I remember I went into the iPod Touch itself. Went to...
Settings > General > Reset > Reset All Settings
After that, I got back to the window from iTunes asking if I want to manually manage songs. I unchecked the box next to the choice of letting iTunes do it automatically.
But Even after that, I had the synching problem.
So I went into the main iPod Touch tab in iTunes. Under options the "Manually manage music and videos" box WAS CHECKED. I decided to uncheck it. Maybe the iPod was observing 'Opposite Day'. I know my cellphone does. On my cellphone, when I choose to play videos without sound, it plays WITH sound. So, I dunno...
Anyway, after I UNCHECKED "Manually manage music and videos" I ejected the iPod and reconnected it. And I plugged the USB into another port. Guess what? It didn't automatically synch. And when I added music on my own from either iTunes or the Finder, it worked well too. The weirdest thing... when I went to have a look at the box next to "Manually manage music and videos" - it had been checked again, without my doing.
UPDATE: And as I began typing that last sentence - THE ERROR CAME BACK. So.. NEVERMIND! I'm still stuck and angry!
*UPDATE II:* The error happened again after a song I was listing to in iTunes from the Touch ended. Once it ended, the error popped up and music stopped playing. I tried dragging a new song from iTunes into the Touch and it wouldn't let me. I unplugged and then plugged the iPod back in, and dragged songs again. So far it works... SO FAR. So far no errors. I tried deleting a song from the Touch and also no problem.
*UPDATE III:* I did a test. I added album artwork to songs that had none, already inside my Touch. It took a bit longer than it would have on my computer, but all tracks on the album got the art work, and the error message has yet to display since I did so.
*UPDATE IV* I've only been adding up to 10 songs at a time, worried that it would freeze. This time I added 31 songs, and they all imported - no error messages. Currently I'm worried that if I play a song from my Touch through iTunes the message will return. I'm too afraid to do it deliberately. I know I was able to do so with no problem with my 2nd Gen 10GB iPod I've had for years. That was working with my computer as of 3 days ago!
Message was edited by: Daniel Brown

Can't Sync New Nano: "The disk could not be read from or written to."

I just got a new nano for Christmas, but can't seem to sync it with iTunes. I updated all the software, reset, restarted, restored, and all the rest, but it still gives me the same error whenever I try to sync it:
"Attempting to copy to the disk "{Ipod's Name}" failed. The disk could not be read from or written to."
If I change the settings so it's not downloading anything it doesn't complain, but as soon as I select any artist or album to actually sync, it gives that error.
There's also one specific file that gives a different error message (in addition to this one)--it tells me that the file wasn't copied because the iPod can't play it. I tried looking for someone with the same problem, but all the ones that I found were talking about this happening to videos, and this is just a straight audio mp3.

Just doublechecking. In the course of your troubleshooting to date, have you worked through the following document?
["Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod|http://support.apple.com/kb/HT1207]

"Unknown Error" (-50) The disk could not be read from or written to

My iPod Nano syncs fine, but I have never been able to change a setting without getting the above error dialogs
("Unknown Error (-50)" and "The disk could not be read from or written to")
Does anyone know what's up?

So, it's not so much that you're getting a -50 error. It's that you're having problems with the iPod because it can't be properly restored. Let's get the log from iTunes trying to restore the iPod and send it to those lazy Apple engineers.
To get the iPod restore log:
1. Quit iTunes.
2. Relaunch iTunes.
3. Try the restore. See failure (1418) then grab the newest file in the folder:
C:\Documents and Settings\yourusername\Application Data\Apple Computer\iTunes\iPod Updater Logs
(There's a new one created every time you run iTunes which is why I want you to quit and relaunch iTunes.)
You need to send that file to our buddy Roy. Make sure that you include:
(1) the drwtsn32.log file.
(2) the link to this thread.
(3) a one line description of your problem, i.e. "-1418 error when restoring iPod".
(4) the username that you're using here in the discussion boards.
(5) tell him Toonz sent ya.
Roy is getting a little swamped with messages and needs to make sure he gets all the information. And if he doesn't get that information, the message is just going to get dropped on the floor.

Global SNP settings could not be read

Similar Messages

Maybe you are looking for