Global system settings for Firefox 5 on Ubuntu 11.04

I need to set the default home page for all users on Ubuntu 11.04 systems running Firefox 5, but it doesn't seem to work like it did in previous versions.

OK , I have checked the log files for the server - it says it is using NON-BLOCKING source file:/dev/urandom
Looks like this must have been sorted out in 10.3.5 as it recognizes the Linux System.
I have the same issue on all 6 of the servers I have installed - so this may be a different issue.
These are BL460c g6 HP blades in a c7000 chassis.
So now I am at a dead end.
The initial wait is still considerable, but we may have to live with this (Ubuntu Server 11.04 is still new and probably not supported well at this time)
The admin console works fine once it initially opens and is fast.
I tried the java command as well and got an error finding the main class in weblogic.wlst, (not the end of the world).
all in all though it looks impressive right now, aside from the minor admin stuff, my application runs fine (which is what counts in the end).
I will leave this open so that anyone else can view it and make suggestions.

Similar Messages

SOAMANAGER "Global System Settings" link not found

Dear Sirs,
We are trying to integrate SRM 7.01 with ECC 6.0 EhP 6 using Web Services without using PI.
We have come accross blog "Transfer of central contract from SRM to ECC using Web Services without PI"
by Naveen Rajan.
However we cannot find the link "Global System Settings". Is there any certain configuration we have missed?
Could it be the SLD (taken from the business system name) ?
Where do we set this up?
Thank you in advance for your help.
Marios.

Hi Bala,
Are you putting anything in the Global SNP Setting Profile field. If Yes, you have to define the profile in <b><i>SNP Customizing under Maintain Global SNP Settings</i></b>. After defining, anyone of these is to be activated.
Regards,
Manjit

System settings for purchasing organization PO01 incomplete

Hi!
I've been doing a vendor evaluation but I got this message: System settings for purchasing organization PO01 incomplete. Kindly assist me where in SPRO can I fix this. Thank you.

hi,
Define Purchasing Organization data for vendor evaluations in transaction OMGL.
Hope it helps..
Regards
Priyanka.P

System settings for bdc?

hi frenz!
are there any system settings for running a bdc automatically in background?
the problem i am facing is that my bdc code is running in the background as required in the devlopmant system whereas when i move the same code to the quality system i have to go and execute the bdc explicitly in sm35. Please advice.
as an additional peice of info im using call transaction method and the mode used is P..

HI Payal
I was also once getting the same value of sy-subrc.
My problem was with recording.When i was running in foreground,I was pressing the buttons(ok_code)
but in background it was not possible very obviously
so I checked my recording and the problem was solved.
Secondly, check if you are hardcoding a request no somewhere
as while running a bdc it may asks for a request
but it wont be in quality.
Please revert back in case of problems
Please reward points.

Use System settings for proxy

You should allow the Mac Desktop version to use the system proxy settings. Curerntly, I have to switch my proxy settings everytime I leave/return to work. It would be better if Spotify just used the Mac OS system settings for the proxy. Most other software does this. And this is why there are system settings in the first place, so other software can take advantage of them.

Good news everyone! Apple Music iTunes perfectly uses the system proxy settings, even when they are set to socks, and that without a restart from the client. Seamless integration, works perfectly.

Making system settings for measurement documents and measuring point

What is the significance of making system settings for measurement documents and measuring point in spro?
Edited by: Pallavi Kakoti on Jul 14, 2011 1:23 PM

Hi,
<< Moderator message - Cut and paste response from http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YY-OLI0IMRCCUST removed. Plagiarism is not allowed in SCN >>
Regrds
Jitender
Edited by: Rob Burbank on Jun 6, 2011 10:53 AM

System settings for purchasing organization 1000 incomplete

I have done Vendor evalution setting for one purchase organization.
then i went to t.code : ME61 For maintain vendor evalution while doing i got error message like " System settings for purchasing organization 1000 incomplete ".
Please anyone help me out in this

Hi
Which Criteria you are evaluating standard or custom?
If you are doing Vendor Evaluation for Purchasing Org 1000, you need to complete the assignment of Criteria, Sub-criteria, Weighing keys and Maintain Purchasing Organization data.
Thanks
Prashanth

System Settings for Kodak Zi6

Yikes, this is driving me nuts.
When I export from FCE for youtube, I'm getting some funky borders/margins. And I think it is my system settings.
I'm eager to export to 1280 x 720, as that is what YouTube says is it's max.
What do I set for System Settings for the HD from a Zi6?
Thanks so much.
Brad
For a bonus question, do I have to change the settings when I use lower quality video from my Casio Exilim, which I only rarely use, but sometimes like to mix video from that camera in w/ video from the Zi6
THANKS!

here's the youtube video to see the margins http://www.youtube.com/watch?v=4B9SkvhoUYw

HTC Legend does not meet the minimum system requirements for firefox.

I have download firefox(Android) for HTC Legend. It had shown that this device does not meet the minimum system requirements for firefox. I want to know that what is the problem in this device. Actualy, Firefox has already downloaded in this device.

See https://wiki.mozilla.org/Mobile/Platforms/Android for system requirements, and an experimental version that might work on your phone.

What are the system requirements for Firefox 4

What are the system requirements for Firefox 4.0? There's all sorts of information on how to improve performance, etc., etc. However, I cannot find the simple list of system requirements that most software companies put on their web site (i.e. RAM and processor speed). This simple information seems to be completely misssing!

They are available here: http://www.mozilla.com/en-US/firefox/4.0/system-requirements/

"Use system settings" for Proxy is automatically enabled when opening Firefox. Why? I want to use "No Proxy".

When I open Firefox, it requires time to load pages. When I go in the networking, I activate "No Proxy" from "Use system settings", and each time I reopen, the System Settings is back, and the page load slow.

Hello serman77, check '''IF''' you have in your [http://kb.mozillazine.org/Profile_folder_-_Firefox#Windows profile folder] a [http://kb.mozillazine.org/User.js_file User.js file].
The user.js file does not exist by default. If you create the file, forget it, '''if you have not create the file then delete the User.js file''', to see if the problem goes away (some programs create and write in the file also).
'''If you have not a user.js file''' then see : [http://kb.mozillazine.org/Preferences_not_saved#Corrupt_or_damaged_prefs.js_file Corrupt or damaged prefs.js file]
thank you

No Global security settings for my localhost, Help?

Player 9
I develop flash apps in localhost and I receive that error
message:
Adobe Flash Player has stopped a potential unsafe operation
The following local application on your computer or network:
/Application/MAMP/htdocs/joomlagraf/modules/.../ssp.swf is
trying to communicate with this Internet-enabled location:
localhost
I beleive you can fix that in the Global security settings,
but this panel is absent when I right click on my flash movie. I
got —> Privacy/Local Storage/Microphone/Camera only, on a
fresh player 9 install.
How can I access that Global security settings panel, what
can I do???????????
My work is stopped......... Help!

Hi Popocatepelt,
Glad to hear that worked for you….
Local Access Only allows the published SWF file to interact
with files on the local system, but not on the network. Access
Network Only lets the published SWF file interact with files and
resources on the network, but not on the local system.
For more info take a look at the following
http://www.adobe.com/products/flashplayer/security/
For local content:
http://www.adobe.com/products/flashplayer/articles/localcontent/

Allowing Global Security Settings for Local Flash Content

Hi all,
We have developed one e-learning course for our client. This
course will be deployed on the CD; that means it will run locally.
This CD will be dstributed to thousands of users. In this scenario
I am currently suffering from the Global Security Settings issue as
this project uses Fscommand to communicate with the javascript. We
can set the Global Security mannually but it is not feasible to ask
client to mannaully set the Security Settings to "always" as there
are thousands of users viewing this course locally.
I have tried setting "always" value to allowScriptAccess
property of the Object/embed tag in the html but it does not work
where the browser Security Settings are kept as "High".(I think
this is the reason)
So what will be the workaround for this issue?
Please reply me if you gone through this problem and found
any workaround.
Thanks in advance.

Hi Popocatepelt,
Glad to hear that worked for you….
Local Access Only allows the published SWF file to interact
with files on the local system, but not on the network. Access
Network Only lets the published SWF file interact with files and
resources on the network, but not on the local system.
For more info take a look at the following
http://www.adobe.com/products/flashplayer/security/
For local content:
http://www.adobe.com/products/flashplayer/articles/localcontent/

What are the correct setup and system settings for importing HDV video from tape?

I keep trying different "easy setups" and system settings/preferences in order to import both the audio and video from HDV recordings on miniDV tape to no avail in either FCE4 or FCP5. I import via firewire from the camera. My computer "sees" the camera and controls playback (I can hear the audio) but no video displays for capture (just color bars).
My camera is a Canon Vixia HV40 and my computer is a MacBook Pro running Snow Leopard 10.6.8.
I've tried the HDV easy setup...no video...
I've tried HDV 1080i/60 as I saw recommended somewhere else...no video...
Captures standard video just fine but I'd like to try editing some higher def footage.
Any suggestions?
Many thanks.

The combination of all these helpful ideas solved the problem.
I set AV settings to HD and Apple Intermediate Codec HDV 1080i/60 AND set the cameras output to "locked" HDV. Funny, it had been on "A" (Auto) before and should have simply sensed the need for HD output. I then tried to capture using "A" again and this time it detected the difference between SD footage and HDV footage (I had clips of both kinds on the same tape).
I ran similar capture tests on FCP 5.1, FCE 4, and FCPX and all three programs captured HDV video and audio.
Thanks again everyone. Be sure the camera is set to output HDV or "A".

System settings for XI

Hi,
Could some one please explain me on the important steps/settings to do for accessing XI system at remote from our laptop ?
Would be better if someone provides in a step-by-step process?
Regards,
Alex.

Hi Alex
R u able to connect to XI server. Can u please check this first???
There are standard communication ports that are created during installation. The system uses an internal port calculation to determine the required ports, which helps to prevent port conflicts. The system uses an internal port_index and system number for the calculation. For example, 50000100*snrport_index.
Example results:
Admin Tool: port 50004
Telnet: port 50008
Ports used by the J2EE engine can also be configured individually using the Visual Administrator, which is a tool that can be used to administer the Java instance. Another component of the J2EE Engine is the Software Deployment Manager (SDM), which runs on a Java instance and must be configured to manage the Deployment of Java2EE applications.
As the system offers both ABAP and J2EE, each instance must contain an Internet Communication Manager (ICM) that receives the web request and distributes the request appropriately. The operation of the J2EE Engine also requires that the following services are configured in order to active the Java instance in the Web AS:
Regards
Abhishek Mahajan

Global system settings for Firefox 5 on Ubuntu 11.04

Similar Messages

Maybe you are looking for