Global Track - Chords (Only selected Midi and Audio Tracks)

I am looking to have only certain Audio/Midi tracks be trsposed when there is a change of chords in the Global Track section. For example, I am going C/Am/C. At the Am point, everthing (exclusing drums) gets transposed, even the Melody parts. Is there any way to select only the tracks that I want tranposed?
Or is there a better way of doing this. Appreciate the help.
Rgds
Mark

Hi Again
I tried it out today and on the Midi tracks I found the no hassle in ticking the non transpose button. Worked great.
On the audio loop tracks I could not find the no transpose option in the inspector. Appreciate your assistance.
Rgds
Mark

Similar Messages

  • Midi and audio in quartz composer.

    I am fairly new to quartz composer. Does any one know how to set up the midi input or controller in it? I can set up a basic image, but it will not respond to me playing my midi keyboard. I am so lost.

    You just select Midi and Audio tracks while holding down the shift button. Arm both tracks->select the Midi track first (click into track header) ->hold down shift->select the Audio track->both track headers turn grey->record->have fun...

  • Midi and Audio tracks simultaneously armed for recording

    All, whilst engaged in laying down the bass track for the guitar solo section of my latest monster his, I encountered one of those sorts of frustrations that makes one long for some means of swift egress from this mortal coil, this vale of tears: that is, while laying down my totally awesome bass track that when they hear it will send JP Jones and Boosty Collins to employee as actuaries, I kept getting the hateful "unable to synchronize the audio and midi error." I'll spare you the catalog of the various lame attempts I understood to remedy this problem, as well as the curses directed toward my fate, and Daw ineptitude in general. Then I nnoticed that both the software instrument tracks (Addictive drums) and the audio track (aforementioned bass) were both armed for recording, signified by the red R in the track header! Well, upon de-arming the software instrument track I was able to record by bass line in a mimimum of takes, and as visions of illegal intozicants and comen of questionable morals dance through my noggin as recompsense for my trouble, with to make the point to all relative newbies such as myself that the answer to problems that seem on surface intractable as usually staring you right in the glazed eyeball.

    What?...
    I'm sorry maybe I don't understand everything you are sayng... but I can replay to the titles of the Topic!
    Actually recording a MIDI instrument and an Audio Track symultaneously comes with serious bug!!!
    you cannot use Punch-in on Fly when an Audio and instrument track is armed at the same time...
    or better you can but the MIDI and audio output will be dropped for a moment
    Provide a Logic feedback
    http://www.apple.com/feedback/logicpro.html!
    THIS IS A LOGIC 8 BUG!!! BIGGEST SERIOUS BUG!
    I suggest you to use Logic 7 when you need that!
    Thank you so much for remember me this..
    I'm sorry no alternative solution... or.. if you have 2 Macs you can use one for Logic MIDI and another one for Logic Audio!
    G

  • Can't recording  Midi  and Audio at the same time

    I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
    Tracy

    Hi!
    Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

  • Error Garageband - can't sync midi and audio

    I have no midi attached but still get an error message "Can't sync midi and audio".
    All I am trying to do is record a voice-over using the built in mic on the iMac.  But this error message keeps popping up constantly.  I close it and then 10 seconds later it pops up again.
    Why is garageband trying to sync a mid that I have not connected?

    Hi!
    Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

  • Can't Record Midi and audio  Simultaneously

    I just noticed that I cant record audio and midi simultaneously. I wanted to record a audio vocal track as I was recording a midi piano track but it wouldn't record. If I selected the audio track, the midi track wasn't heard. If I selected the midi track, I could hear the piano, but the audio wouldn't record. Weird. I had to record the midi track, and then go back and arm 2 audio tracks for recording. One for the vocal and the other to convert the midi track into a audio track. I don't understand why I can't record midi and audio at the same time. I am using a MOTU 896HD for my audio, so I can record up to 8 audio tracks at a time.
    Does anyone have any clues as to how to set this up to record midi and audio at the same time?

    Setup your audio and midi tracks and then hold the shift key and hit the record button on each of them. Both audio and midi will record.

  • How to record midi and audio at the same time?

    Hello,
    I have a Roland sh-201 synth and Logic 9. When I use patches from the sh-201, it will record it via audio. What if I wanted to record the audio but also have the midi information as well? How would I be able to accomplish this? My synth is connected via USB which carries both midi and audio. Sorry for my poor english, but any help would be greatly appreciated.
    Thank You.

    Hi
    Logic will record both audio and MIDI at the same time, but you *MUST* have the Software Instrument/MIDI track selected in the Arrange Track List.
    The audio track must be 'Record Ready':
    HTH
    CCT

  • Logic i/o midi AND audio?

    im trying to use the Logic i/o plug in , not sue if im doing it right?
    I have a sound module thats going into my 828mk2 inputs (11&12) and midi set up.
    I can play the module fine from Logic but i thought that when you used the i/o plug in you could set up ONE track to use (like a internal plug in) that became the midi and the audio in order to record the track?
    Do i have to record on a MIDI track the part from the module and then use a different audio track to capture it?
    Im sure once i used a instrument track with the i/o on it and it became a midi/audio track all in one for outside gear? so i could record/midi all within the one track?
    Am i being stupid?

    so how do i use the external instrumnet and the i/o together?
    External instrument on the instrument slot on a software instrument channel. This handles both MIDI and audio routing. What do you want to use the I/O plugin for? If you want to route to external hardware, then put the I/O plugin on one of the FX inserts on that software instrument channel.
    Can i make my hardware become like a VST? and if using both utilities can i render a file to audio like i can a vst?
    No, you have to record it in the conventional way.
    or does it have to be real-time bounce only?
    Yes, external instruments have to be played in real-time. Logic cannot yet speed up the universe to perform faster than realtime bounces - at least, not in Logic 8...

  • Midi and audio regions are getting moved

    Hallo... I am working on my arrangement on Logic Pro 9.1.8.  I have many midi regions on a few tracks.  I added a few audio tracks and started to slice them and reversed some parts.  (I also played with new key commands)  Now all the regions on each track (midi and audio) seem to be tied up.  When I delete one region all the others (on this track) shift toward its position.  Why does it happen? 
    (Locking SMPTE position partly helps but I would like to have access and be able to edit the regions).   Any help would be appreciated.

    Sounds like you've got your drag mode (upper right of arrange) set to one of the shuffle settings.

  • Why can I only change chapter and Audio, but not subtitles?

    I have a little problem, and I don't understand WHY it should be a problem.
    I have started ripped all my movies into a local computer for home sharring. We have some Apple TVs in the house and everything works well for ripping and watching movies.
    All our movies has been ripped in HandBrake and thereafter metatagged in MetaX. In Handbrake I choose the standard A TV 2, which languages I want and which subtitles I want.. The funny part is, that When I try to watch the movie in either iTunes or Apple TV, it is only possible for me to select chapter and Audio. I am sure I am not the first one to experience this, so if somebody could tell me if I do anything wrong? Or is it just iTunes and Apple TV that won't let you change more that 2 different data?
    i have tried to rip a movie without any chapters (a very short movie) and then it was possible for me to change the subtitles, but nothing else.. I donøt understand it and it is very confusing.. :/ Please help somebody.. Just tell me if it is my fault or it is Apple's fault..

    Sorry we cannot help you circumvent copy protection, such discussion is prohibited in these communities.

  • USB/Firewire Interface for MIDI and audio (Garage Band)

    I want to connect a Roland Handsonic (electronic drum) and Shure microphone to a Mac Pro for recording in Garage Band. What is the best USB/firewire interface for MIDI and audio?
    Mac Pro desktop   Mac OS X (10.4.8)  

    If you click one of the links you can read all about it in depth.
    three guitarists
    That's not what you asked for B-)>
    Once you want more than 2 audio inputs, the prices start jumping up dramatically.
    would this be the best interface to use?
    If you really want "Best" then it's a simple answer:
    http://www.bulletsandbones.com/GB/FirePod.html

  • Experiencing Delay Between Midi and Audio MOTU 828 Mk1

    Hi everyone
    Wondering if somebody can point me in the right direction. I'm using an Intel iMac running Leopard 10.5.8 and Logic 8. I just got hold of a MOTU 828 MkI and am experiencing a severe delay between midi and audio.
    Clock source is set to internal in the 828 settings and sample rate is set at 44100, so that's all as it should be.
    I'm at a loss has anybody got any ideas?
    Many thanks.

    Hi,
    I assume MIDI is earlier than audio.
    Do You have plugins in busses and or master outputs?. Try to disable them and see if that still happens.
    Here I had issues with 9.01 that aren`t plugin related and had to reboot to solve it. I upgraded to 9.02 and didn`t see them again (yet.)
    If you HAVE to have your plugins in the busses and master and still want to have your MIDI properly aligned... Well you´re asking too much, my friend. Write a polite letter to Apple telling them if they´re joking calling Pro to this app that can´t keep two basic features in sync. BTW: same happens with video (at leat in L8. Didn`t check 9 with that yet)
    After that, breath deeply and use the input objects to route your midi instruments inside Logic. Then they´ll be in sync, but at the price of loosing all their analog warm. Weird, isn´t it?

  • Replace mode midi and audio

    I hope I'm missing something. when recording midi and audio at the same time, with merge and replace turned on, the midi is ok but the audio is NOT in replace. Is there a way around that. If not does logic have a play what's on top structure like nuendo? I need to emulate a tape machine as closely as possible in this application
    Thanx

    I hope I'm missing something. when recording midi and
    audio at the same time, with merge and replace turned
    on, the midi is ok but the audio is NOT in replace.
    Is there a way around that. If not does logic have a
    play what's on top structure like nuendo? I need to
    emulate a tape machine as closely as possible in this
    application
    Thanx
    i am not sure if this answers this. Your audio is not sounding like a tape machine?
    Try inserting an au unit like: Tape delay, Stereo Delay, or Sample delay, which are all within logic.
    If you want the full effect place it in the insert. If you want a partial effect send it as a bus.
    I hope this helps.
    Dual G 5 2.5 ghz hightower     1 gig
    Dual G 5 2.5 ghz hightower   Mac OS X (10.4.5)   1 gig

  • IPad2 - Midi and Audio interfaces / Camera Kit

    iPad2 question I have Midi and Audio interfaces, specifically Edirol UM-880 for Midi and Edirol UA-5 for Audio. If I get an Apple Camera Connection Kit, will they work with my iPad2

    Check out the iRig:
    http://www.ikmultimedia.com/products/irigmidi/
    It will connect "any" MIDI device to an iPad/iPhone.
    (i don't have this--yet. I'm just using a USB powered keyboard with a powered USB hub with my iPad.)

  • TreeView - Expand only selected node and collapse others

    Hi
    How I can expand only selected node and collapse other nodes that was expanded earlier?!

    Ghostenigma,
    switch Option Strict On. I've tried to analyze the code but it's not usable due to type ignorance.
    BTW, Goto is not required here. ELSEif means it's only executed if the previous expressions are not true.
    Armin
    Ignore other code and give an reply for what I've asked else you are not obligated to post a reply at all!
     I am not sure if you took the "type ignorance" part wrong but, Armin was only trying to give you helpful information which i would give too.  Option Strict is a GOOD thing to use and the GoTo statements are not needed inside your ElseIf
    statements.  As far as that goes, i would not recommend using GoTo in any modern .Net programming.
     Anyways, the problem is with the way you are Adding and Removing all the child nodes every time the nodes are DoubleClicked and when they are Collapsing.  I just simulated your code to add the sub nodes when a main node is double clicked. 
    You can just use the NodeMouseDoubleClick event instead of the TreeView`s DoubleClick event to make it a little easier on yourself too.
     This corrected the problem for me.
    Public Class Form1
    Private r As New Random ' this random class is only for my simulation of adding sub nodes (not needed)
    Private expanded As TreeNode
    Private Sub TreeView1_BeforeCollapse(ByVal sender As Object, ByVal e As System.Windows.Forms.TreeViewCancelEventArgs) Handles TreeView1.BeforeCollapse
    e.Node.Nodes.Clear()
    End Sub
    Private Sub TreeView1_BeforeExpand(ByVal sender As Object, ByVal e As System.Windows.Forms.TreeViewCancelEventArgs) Handles TreeView1.BeforeExpand
    Dim pn As TreeNode = e.Node
    While pn.Parent IsNot Nothing
    pn = pn.Parent
    End While
    If expanded IsNot Nothing And expanded IsNot pn Then expanded.Collapse()
    expanded = pn
    End Sub
    Private Sub TreeView1_NodeMouseDoubleClick(ByVal sender As Object, ByVal e As System.Windows.Forms.TreeNodeMouseClickEventArgs) Handles TreeView1.NodeMouseDoubleClick
    'Added this part to collapse the prior expanded node and set the (expanded) node to the new one
    If expanded IsNot Nothing And expanded IsNot e.Node Then
    expanded.Collapse()
    Dim pn As TreeNode = e.Node
    While pn.Parent IsNot Nothing
    pn = pn.Parent
    End While
    expanded = pn
    End If
    'This just simulates your code to add the new sub nodes to the main node that was double clicked
    'you need to put your code here instead of this.
    Dim str() As String = {"one.mp3", "Two.mp4", "Three.mvk"}
    Dim s As String = str(r.Next(0, 3))
    e.Node.Nodes.Add(s, s)
    e.Node.Expand()
    End Sub
    End Class
     PS - I notice you are adding more and more Images to your ImageList every time you double click on a node.  If you just add the Images to it once when the app is loading then you can just use the Image Key to set the correct Image to the newly
    added node.
    If you say it can`t be done then i`ll try it

Maybe you are looking for