Global track tempo curves stop working: advice?

Hello everyone,
I working on a film score right now, and to get more life out of this cue I have drawn many slight tempo curves, as well as a couple large ritardando. For some reason or another, the global track tempo curves will randomly stop working, and thus I have to manually adjust the curve to get them working again.
Is there anyway to fix this problem? I can never seem to get back to the original when manually adjusting the curve. Is there a "refresh" mode for the global tempo tracks, similar to what is done for fade files? Is there an option to "print" these into solid tempo maps? I've searched the forums but thus far have come up empty handed.
Thanks in advance for your help!

I would recommend starting with a SMC reset, here are some instructions for doing one. Sometimes it takes 2-3 attempts to fix a problem so don't be afraid to repeat it.
SMC RESET
• Shut down the computer.
• Unplug the computer's power cord and all peripherals.
• Press and hold the power button for 5 seconds.
• Release the power button.
• Attach the computers power cable.
• Press the power button to turn on the computer.
PRAM RESET
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
• Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Similar Messages

Global Track Tempo Line

I've done a tremendous amount of rubato type editing in the Global Tracks Tempo Line. But some of the tunes are generally too slow. Is it possible to make the whole track faster while keeping the ratios of the gradual tempo changes? e.g. can I keep all my rits and accels while making the whole thing faster?
Thanks

Thanks for helping me.

Next/Previous Track multimedia buttons stopped working in 2.18

After upgrading to 2.18, when I use Banshee the keys that are mapped to next/previous track have stopped working. However, volume change and mute buttons still work.
I checked the Gnome configuration (preferences -> keyboard shortcuts) and those keys are mapped properly. Who knows how to explain this?

Here is my .xbindkeysrc. It works for me with exaile. Note that I am using mouse buttons. You'll want to replace them with keycodes from your keyboard.
#Mouse: Volume Up
"/usr/bin/amixer -q -c 0 set PCM 2dB+ unmute"
m:0x0 + b:13
#Mouse: Volume Up
"/usr/bin/amixer -q -c 0 set PCM 2dB- unmute"
m:0x0 + b:14
#Mouse: Next Track
"/usr/bin/exaile --next"
m:0x0 + b:15
#Mouse: Prev Track
"/usr/bin/exaile --prev"
m:0x0 + b:16
#Mouse: Media Button
"/usr/bin/exaile --cleanversion"
m:0x0 + b:10
#Mouse: Play/Pause Button
"/usr/bin/exaile -t"
m:0x0 + b:17

Track pad Gestures stops working after upgrading to mountain lion osx

I upgraded to Mountain Lion Osx from Snow Leopard on my Macbook pro (Mid 2011 model) last month. However, it happens so that sudden;y all kind of trackpad gestures stops working. I have tried to find options on System preferences but nothing really works. i have tried unticking and then ticking again all the options to no avail. Even though restarting machine sometimes help but not always. Are their anyone with similar problems and if it is did you manage to come out with possible soutions?? If you did please kindly share as it is quite annoying to use machine without those gestures
Thanks in advance

Launch Terminal, type or copy/paste the following:
killall Dock
Hit enter.

My mail link has stopped working advice would be so welcome

I can open my mail from my browser but when the M Mail button is pressed only half a page is displayed and no new messages will download.
I am not technically minded, being in the over 70 brigade and am scared to do resets as I may lose everything.
A step by step info to overcome this problem would be very much appreciated. I did ask on the little speaker help button but it just said 'four new messages today'!!!
Thanks in anticipation.
Mavis

Try reading through this trouble-shooting advice for Mail: http://support.apple.com/kb/ts3899

Help please :( Curve 9300 track pad stopped working!

Hello,
I have a curve 9300 and the track pad has stopped working it lets me move around fine but when i click to open things nothing happends its just stopped working ive only had the handset around a month im wondering is there anyway to resolve the problem and get it working again or do i need to send it some where to get fixed?

Hi and welcome to the forums Lotte !
A couple of places for you to visit: Blackberry 101 Tips & Tricks
Pull the battery out with the device ON. Wait about a minute and put the battery back in. Let the BB completely restart and see if that doesn't help. Clears out the memory and refreshes the BB; like rebooting your pc.
When you have anomalous behavior in your BB a battery pull often helps to clear it up too.
Let us know ow it goes..Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

My scroller has stop working HELP !!!

Hi there I brought my curve 9300 about 2 months ago and about 3 days ago my track ball has stop working all together dose this come under warranty and its it fixable if it is how can you tell me please ??? Thanks

hello, the same things have been happening to my scroller? Was just wondering have you fixed it yett?

The track pad buttom not working

Hey everyone,
I have a BB curve, and for some reason the track pad just stopped working. I am very gentle with my
BB and I don not really understand what could possibly happened. It is completely frozen on the left up side of the screen on the " search" option ( the hand lenses icon).
I already turned it off-on and I also removed the battery , and it is still in the same position.
I can receive calls, and make calls using the speed dial letter/pad. What can I do/try?
Please help!!!
Thanks in advance.
Betty 06

Hello bettybetty06,
The following article may help regarding the issue you are experiencing with the trackpad on your BlackBerry® Curve™ smartphone:
Trackpad, trackball, or keyboard not working on a BlackBerry Smartphone - http://www.blackberry.com/btsc/KB29640
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Hpqdirec.exe has stopped working report: HP Solution Centre

Has any progress been made with resolving the "hpqdirec.exe has stopped working" problem? No positive suggestions have been put forward in the past other than to try using HP Print and Scan Doctor, which I tried unscussfully prior to looking for a solution on the forum. I suspect it may be due to me having recenhtly used "Driver Booster 2.3 (Free)" to download and update a whole variety of drivers, including HP Drivers. Since then "HP Solution Centre" just hangs until cancelled and then the "hpqdirec.exe has stopped working" advice appears. HP Print and Scan Doctor reports no problems when the Scan option is selected and if Test Scan is then selected, one can still Scan, but it is only a once off. Any direction would be much appreciated. John

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing issues with regards to one of the Windows component which is missing
We will surely assist you with this issue
Please click on the below shown link to find the steps involved in resolving the issue
http://tinyurl.com/khb65xv
You can Check your warranty Here to verify the status if required
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

My track pad does not work anymore

My macbook air was baught in 2010 and the track pad has stopped working. Can it be helped with software ocr is it a hardware issue.

1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Can't figure out how to increase tempo curve for a track/region

What I'm trying to accomplish:
Using the heartbeat.aif (Audio) that comes with Logic Pro, I'd like to have the affect of increasing the speed of the heartbeat over a defined period of time.
I've tried the "time machine" to change the BPM but it operates on the current selection in a region (there is no curve over time option). I've tried using Tempo Operations (Temp Curve) but those don't appear to work well with Audio files -- at least I was not able to get it to work well (suggestions are welcome).
What would be perfect is an Automation process that includes Tempo where I could draw the tempo change line and then capture that to a new region (via the Sample Editor).
As a temporary solution I could use the Time Machine to change smaller sections of the original source heartbeat.aif and do increment renders (i.e. 120.00 +50%, 120.00 + 100%, 120.00 + 150% and then merge the regions into one. But this does NOT provide a very smooth transition.
Also tried adding a Tempo Fader and connecting it to Audio track, but adjusting tempo using this method caused all kinds of undesirable results even if I recorded to file and tried to use the resulting audio file.
There must be something simple I'm missing -- any suggestions?
Thanks, Rob.

Yes this is an Apple Loop (Heartbeat.aiff).
I must be missing something, I can't find any place in Logic Pro that lets me draw the Tempo?
Are you talking about: Options | Tempo | Tempo Operations
from here selecting "Create Tempo Curve"?
If so, I can't find a way to actually draw the curve from here -- unless I'm missing something? I can select a pre-defined set of 3 curve types. I've tried this approach but didn't get the results I expected -- I'm guessing the Curvature value needs to be 1.0? In fact, the only values this field accepts is 1, 0, or -1. Manual indicates positive or negative to increase/decrease speed. I can change the resolution from 1/1 to 1/8 to a finer change.
Regardless, I've experimented with this and no matter what I do, the audio region will change in the Arrange window but when I play the modified heartbeat it still sounds exactly the same, no change in tempo?? Is this a bug or am I just not doing something right?
Thanks, Rob.

Blackberry 9220 track sensor stop working

blackberry curve 9220 is a good set to use, but now i face some problem with track sensor.
once i installed the battery and boot the set, Track sensor works but after some time (approx 15 to 20 mints or some time after an hour) TRACK SENSOR stop moving only click button works.
This is know the routine process for me whenever sensor stop working i open the back cover and plug battery out.
and wait for 45 to 50 mints. After waiting whenever battery installed and set reboot sensor satrt working but only for some time sometime 15 to 20 mints or 40 to 45 mints but after that i have to face same problem of track sensor not moving and i' have to follow above said way
plz help me out guide me what to do..

You can purchase the trackpad piece and replace.
Try truesupplier.com
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Help! Touch tracker stopped working!

Hello
My touch tracker has stopped working on my Blackberry Curve 9300 3G
I cant scroll or move round
Can you help?
Thanks

Have you attempted a soft reset by pressing ALT + Right Shift + DEL?
Have you attempted a battery pull?
What were you doing on your BB when this problem occured? Any recent updates? Check the top post for a neat form factor that you can put all your information in that will help us figure out a solution for you much faster. Cheers,
- Gary

My Curve 8520 stops working

Hello,
My Blackberry smartphone curve 8520 stops working. I can't call or ping. It has given me the message to reload software 552. Even my service provider can't help me. Is there anyone who can help me with this?

Hi
I'm sure we can help
This what I did to completely wipe my BB. I wrote this before starting and printed it off.
If your device is functioning, perform a backup now if you haven't already done so saving the file to a place and in a name that you can easily locate on computer.
I then uninstalled DTM and then deleted all other references to BB/Rim in Windows Explorer thus removing the OS for the BB from the computer in order to ensure that the version I would reinstall would be a brand new downloaded version.
Get the latest Desk Top Software (DTS)
http://us.blackberry.com/apps-software/desktop/?CPID=OTC-DSKTPSW&cp=OTC-DSKTPSW
and install it on the computer.
Get the correct latest version of the OS
http://us.blackberry.com/support/downloads/download_sites.jsp
and save it to computer.
If the PC does not recognize the BB, You need to connect the via the USB cable. Then pull the battery from the BB.
With the battery pulled, connect the BlackBerry to the USB connector and as SOON as you see USB-PIN:UNKNOWN hit Next. You have to be quick. From there you can put the battery back in (make sure you install the battery or else when the OS update is completing and the device disconnects from the computer to reboot, it will lose the power provided by the USB connection and you will get an error and have to do it all over again!).
If you don't get it right the first time, try again (unplug from USB, pull battery, connect and hit Next while USB-PIN:Unknown is showing). You have to be fast and the timing is key, so it may take you three or four attempts.
To erase all the data on your BlackBerry device, complete the following steps.
1) Download JL_Cmder from http://www.4shared.com/get/oqP9V-2Q/JL_Cmder_v19.html
2) Install JL_Cmder to computer.
3) Double check you have already backed-up the BB. If you DO NOT, you will lose ALL data.
4) Make sure the DTS is closed and plug in the BB to computer via USB
5) Go to the JL_Cmder on your computer and double click it to start. Now,this may take a few tries to connect, so keep trying until it does.
6) On the first screen, Press any key to continue.
7) Now, if your device uses a password, enter it now. If not, press "N"
8) Press 4 to initiate the WIPE
9) Press "Y" to continue
10) Now type "blackberry" to continue
11) On the BB you will see a white screen with a'507' Error. Don't worry, this is what you want! You are now ready to install the OS.
Launch the new Desk Top Software on the computer
1). On the home screen of the BlackBerry® Desktop Software, click Device > Update my device.
2). Click View Other Versions. Click the version of the new OS you previously downloaded.
3). Click Install. The DTM will install the OS and then provide you with a list of applications to install. If you have had difficulties with an app, do not install it.
Do not disconnect the device until the whole process is completed and the device has rebooted.
After 10 minutes reboot again by removing the battery whilst powered-on and leave it out for a couple of minutes.
Leave it again for 10 minutes. You should now have a fully functioning BB!
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

HT2292 I have a 3GS iphone.It was working alright with iTunes.Recently, it was unlocked. After it was unlocked, the iphone is functioning alright but it is not recognized by iTunes and iTunes stops working, when I connect iphone.Any advice please.

I have a 3GS iphone. It was jailbroken and working alright.But I was not able to upgrade its IOS frrom 4.0.1 to higher versions and many applicatopns were not compatible with this version of the IOS. So I decided to do a factory unlocking. From an website, based in Mumbai, I unlocked it. When I check now in different websites from my IMEI number, my iphone is unlocked. So I became happy that I can now upgrade my iphone. But the events turned to be different.When I connected to iTunes, iTunes stopped working and my iphone did not appear in the iTunes. I uninstalled and reinstalled iTunes after cleaning previous registry of all relatedd components like Quicktime, Bejour,Apple software updates and mobile softwares. I also used msconfig to troubleshoot conflicts in software of Windows 7 ultimate but still my iTunes is not working, when I connect the iphone. If I do not connect the iphone, iTunes is working alright. Can any friend give me some advice how to proceed. I do not like comments like Jailbreaking is illegal and should not have been done. Please advice me what should I do right now. Thanking you all and expecting some valuable suggestions from this expert community.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

Global track tempo curves stop working: advice?

Similar Messages

Maybe you are looking for