Global Track Tempo Line

I've done a tremendous amount of rubato type editing in the Global Tracks Tempo Line. But some of the tunes are generally too slow. Is it possible to make the whole track faster while keeping the ratios of the gradual tempo changes? e.g. can I keep all my rits and accels while making the whole thing faster?
Thanks

Thanks for helping me.

Similar Messages

Global track tempo curves stop working: advice?

Hello everyone,
I working on a film score right now, and to get more life out of this cue I have drawn many slight tempo curves, as well as a couple large ritardando. For some reason or another, the global track tempo curves will randomly stop working, and thus I have to manually adjust the curve to get them working again.
Is there anyway to fix this problem? I can never seem to get back to the original when manually adjusting the curve. Is there a "refresh" mode for the global tempo tracks, similar to what is done for fade files? Is there an option to "print" these into solid tempo maps? I've searched the forums but thus far have come up empty handed.
Thanks in advance for your help!

I would recommend starting with a SMC reset, here are some instructions for doing one. Sometimes it takes 2-3 attempts to fix a problem so don't be afraid to repeat it.
SMC RESET
• Shut down the computer.
• Unplug the computer's power cord and all peripherals.
• Press and hold the power button for 5 seconds.
• Release the power button.
• Attach the computers power cable.
• Press the power button to turn on the computer.
PRAM RESET
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
• Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Is there a workaround for the missing global track chords?

Is there a workaround for the missing global track chords? i.e. will Apple loops follow the chord progression in a track?

I found sort of a work around. I still have Logic Pro 9. It turns out that if you go into global tracks, analyze the chords then go back to logic pro x the chord progression is preserved. So the information is preserved there just seems no way to create it in X.

Logic pro x. Global tracks chord

I work a great deel with Logic Pro 9 using Global Tracks Chords to manage chordshifting when i use loops. I Bought Logic Pro X, and I cant find this possibility
In Logic Pro X. Need help fast......

Yes Gr8Dayz, it is correct. No support for Chords. This is incredible because competitors, like Cubase, add this features at highest level to help composer.
Not all... I've found big problems with loops without chord track... yes, you can use "flex" but it's not a solution for a songwriter or for a composer that wants to give a "song structure" with chords (and found "ideas").
At the end to compose with Logic Pro X takes 3-4 time more than "old" Logic Pro.
It's incredible but yesterday I had to import a simple MP3 file (44.1 khz.) to make a recording. I could not believe what I saw ... Logic Pro X makes a mistake ... the beginning of the audio file was compromised ... there were silences/empty sound placed in the first 5 seconds .
I've been working on this thing one hours, I thought I had done something wrong. So I repeated the import procedure 10 times creating new projects at all frequencies available.
What had happened? Logic Pro X has a not defined bug that prevents (in this case) the correct import file.
How do I know this ?
Easy.
I opened my beloved Pro Logic (the " old ") and the first time everything worked fine. Not only was it faster, but the file WAS PERFECT. Sound great.
Conclusion . I am going to leave the O Logic Pro X. If Apple programmers do not change things I AM OBLIGED TO SPEND € 600 TO BUY A PROGRAM THAT MAKES SERIOUS THINGS SERIOUSLY... II will not give you the name of the software, but you can easily imagine it.
I think we could change the name of Logic Pro X and, unfortunately, rename it with a different name : Amateur (il)Logic X...

Track a Line String with a Trigger

Hi,
(sorry for my bad english)
I need to know if i can track a Line String with a trigger. For example, in my case, i've to colums called "COORDINATEPARTENZA" and "COORDINATEARRIVO". From contains a CONTROID() coordinates, anche TO contains CENTROID() coordinates. Now, can i track a line in a colums "LINE" with a trigger? All in automatic?
There is a method to take the coordinates from "COORDINATEPARTENZA" and "COORDINATEARRIVO" and track an automatic stringline with a trigger?
This is the code:
This is the Trigger:
CREATE OR REPLACE TRIGGER "TRIGGERPERCORSO"
BEFORE INSERT OR UPDATE OF luo_nomeluogo ON "SPOSTAMENTI"
FOR EACH ROW
DECLARE
partenza VISUALPERCORSO.coordinatepartenza%TYPE;
arrivo VISUALPERCORSO.coordinatearrivo%TYPE;
vecchioluogo LUOGHI.nomeluogo%TYPE;
nuovocodicespostamento SPOSTAMENTI.codicespostamento%TYPE;
presenza NUMERIC;
BEGIN
SELECT COUNT(*) INTO presenza
FROM spostamenti
WHERE ope_codiceopera = :new.ope_codiceopera;
IF (presenza >= 1) then
SELECT luo_nomeluogo INTO vecchioluogo
FROM (SELECT * FROM spostamenti
WHERE ope_codiceopera = :new.ope_codiceopera
ORDER BY codicespostamento DESC)
WHERE ROWNUM <2;
SELECT SDO_GEOM.SDO_CENTROID (c.COLLOCAZIONE, m.diminfo) INTO partenza
FROM LUOGHI c, user_sdo_geom_metadata m
WHERE m.table_name = 'LUOGHI' AND m.column_name = 'COLLOCAZIONE' AND c.nomeluogo = vecchioluogo;
SELECT SDO_GEOM.SDO_CENTROID (d.COLLOCAZIONE, n.diminfo) INTO arrivo
FROM LUOGHI d, user_sdo_geom_metadata n
WHERE n.table_name = 'LUOGHI' AND n.column_name = 'COLLOCAZIONE' AND d.nomeluogo = :new.luo_nomeluogo;
INSERT INTO VISUALPERCORSO(LUOGOPARTENZA, OPE_CODICEOPERA, COORDINATEPARTENZA, LUOGOARRIVO, COORDINATEARRIVO) VALUES (vecchioluogo, :new.ope_codiceopera, partenza, :new.luo_nomeluogo, arrivo);
END IF;
END;
So, now i need to track a line (with oracle spatial) from "COORDINATEPARTENZA" to "COORDINATE ARRIVO". With another trigger.
Thanks a lot (sorry for my bad english).

"COORDINATEPARTENZA" and "COORDINATEARRIVO" are points, correct?
If I understand, you need to create a line from initial point (PARTENZA) to final point (ARRIVO) in a trigger.
Yes, you can do it.
Anyway, you can write to me in italian (miguel dot fornari at gmail).

XML Parsing Error: no element found Location: jar:file:///C:/Program%20Files/Mozilla%20Firefox/chrome/toolkit.jar!/content/global/netError.xhtml Line Number 1, Column 1:

Accidentally clicked on "Allow for Safe Networks Only" and saved it. When launching Firefox, this error: XML Parsing Error: no element found
Location: jar:file:///C:/Program%20Files/Mozilla%20Firefox/chrome/toolkit.jar!/content/global/netError.xhtml
Line Number 1, Column 1:
I have uninstalled and reinstalled, changed to a new profile, nothing works. I have looked at Options - Network - No Proxy
Please help as I love Firefox

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

What's with this Global Tracks: Chord Analysis/Transposition bug?????

Hi.
In the midst of a fairly complex piece I allowed my mind to wander and thought i'd see what the Global Tracks Chords analysis would make of my piece.... Interesting.
It wasn't till later when trying to copy regions either vertically or horizontally that I discovered I had a MAJOR problem!!
At the suggestion of other threads I checked my Global Tracks Transposition track and sure enough it was a mass of squiggles - directly related to the chord analysis.
Apparently this is a bug, but I have been unable to find any ways to remedy the situation except to unravel the song back to that dreaded moment of idle curiosity!
If anyone has some ideas to help I'd be very grateful!!!!! Many thanks!

Hi.
In the midst of a fairly complex piece I allowed my mind to wander and thought i'd see what the Global Tracks Chords analysis would make of my piece.... Interesting.
It wasn't till later when trying to copy regions either vertically or horizontally that I discovered I had a MAJOR problem!!
At the suggestion of other threads I checked my Global Tracks Transposition track and sure enough it was a mass of squiggles - directly related to the chord analysis.
Apparently this is a bug, but I have been unable to find any ways to remedy the situation except to unravel the song back to that dreaded moment of idle curiosity!
If anyone has some ideas to help I'd be very grateful!!!!! Many thanks!

Global Track - Chords (Only selected Midi and Audio Tracks)

I am looking to have only certain Audio/Midi tracks be trsposed when there is a change of chords in the Global Track section. For example, I am going C/Am/C. At the Am point, everthing (exclusing drums) gets transposed, even the Melody parts. Is there any way to select only the tracks that I want tranposed?
Or is there a better way of doing this. Appreciate the help.
Rgds
Mark

Hi Again
I tried it out today and on the Midi tracks I found the no hassle in ticking the non transpose button. Worked great.
On the audio loop tracks I could not find the no transpose option in the inspector. Appreciate your assistance.
Rgds
Mark

First post - global track commands...???

Hi all,
Great Forum...this is my first post...
I figured out how to change the tracks volume and thus create a fade at the end of a section... I repeated the process successfully on the other tracks... but is there a way to make one change and have it affect every track? Can you affect audio and instrument tracks using the same command?
I used global track component volume and then created dot points on the bar and lowered the last point (the last inch) creating a quick fade... am I missing a fade command somewhere that will simplify this process?
Thanks for the help.. love the forum

hi
I'm not sure if i understand your question fully... are you asking if you can copy automation to different tracks?
The answer is yes! You need to be in automation mode for this....(i really recommend reading Chapter 7, page 313 of the reference manual).
anyway, on the track with the volume automated fade... hold shift and select all the nodes you want to copy. Now press apple - C to copy. Go to the track you wanna copy to and press apple - V.
Ok. that presumes you're using automation? Now Hyperdraw works in a different way - that also automates values such as volume, pan etc but is region based not track based...
Another tip, if you want to fade the whole song then just automate the volume fade on the master OUT 1-2 track.
Also, if you need to fade just a particular audio region you can use the fade tool found in the toolbox.
Hope that helps
Rounik

Global Track / Transposition

I have a project in Logic Pro that I want to transpose, How can I tranpose all of my "keys" and not the drum tones using the global track function?
Thanks
AD2

It's easier to just use traditional method here, you assign drum channels to no transpose in instrument paramaters and transpose tonal regions.

New time sig in Global tracks affects all later time sigs

We've been here before, but I seem to remember someone (Rohan..?) saying that entering the time sig in the Score editor was a way round this problem. However I've just been trying that method and it's no better. Some later time sigs still disappear. Any thoughts?
Edit: Found Rohan's answer to an earlier post of mine here: http://discussions.apple.com/thread.jspa?messageID=1923331&#1923331 but neither the Score Editor method or the Transport Bar method is working now. Agh..

Hi Irv,
OK, you've run into a big, big, big bug. And sorry to hear it too, for I know the frustration of this bug all too well.
There's something about your song that's corrupted. I've reported this problem repeatedly and AFAIK there has been no fix for it.
Workarounds: aside from the usual technique of trashing your prefs and re-establishing them, there are several workarounds which I've discovered but none of them are really very good, except for one, which is total pain in the @ss. Here's the lowdown:
1) Remove any double bar lines or multiple rests that you may have added to your score. Then, re-organize memory and empty the trash (do these latter procedures twice in a row). Save your song, close it, re-open it. Try adding more time sigs and see if the aforementioned operations had any positive effect.
2) Start with a fresh autoload song, and also have your current song open as well. Go to the Global Time Sig track and copy the time sigs (make sure cycle is off). In the fresh autoload, set the SPL to bar 1 and paste those sigs into the autoload's Global Time Sig track. Once again, remove any double bars and multiple rests that may be in your original song. Now copy and paste-at-original-position all of your tracks into the autoload. It's almost guaranteed that this will cure the problem, provided that (sigh) the pasting of the time sigs is actually successful. By this I mean that Logic will not always paste the time sigs correctly. You may have to try multiple times for Logic to paste the time sigs in the right place. Like I said, total pain in the @ss.
(Lemme know if you need details on how to select the time sigs in the Global Time Sig track.)
(the "old") Quad, 6G RAM Mac OS X (10.4.5) On second thought, let's not go to Camelot. It's a silly place.

To track which line item the billing plan date changed.

Hi All.
I have a requirment of tracking changes done for the billing plan date and whenever i change the billing plan date it will be reflected in the FPLA table. But i was not able to track to which line item of the subscription/order the billing plan date changed.
In the FPLA table there is a relation to the VBELN(subscription/order) only not POSRN(line item) is there.How can i track to which line item it got changed.
Thanks for your help.
Thanks,
Neslin.

Hi,
There should be entries in FPLTC for FPLNR found in table FPLA. Try from SE16, enter FPLNR preceded by zeros so that the total length is 10 and execute.For example, FPLNR is 10, enter 0000000010.
Hope it helps.
Regards,
Nupur

To track the line item to which the billing plan date changed.

Hi All.
I have a requirment of tracking changes done for the billing plan date and whenever i change the billing plan date it will be reflected in the FPLA table. But i was not able to track to which line item of the subscription/order the billing plan date changed.
In the FPLA table there is a relation to the VBELN(subscription/order) only not POSRN(line item) is there.How can i track to which line item it got changed.
Thanks for your help.
Thanks,
Neslin.

Hi,
There should be entries in FPLTC for FPLNR found in table FPLA. Try from SE16, enter FPLNR preceded by zeros so that the total length is 10 and execute.For example, FPLNR is 10, enter 0000000010.
Hope it helps.
Regards,
Nupur

Can we do mutiple transpose layers in Global Tracks?

I have a project that contains loops which have been made to follow the chord progression of the main track by using the Global transpose track (the Global Chords function has been taken from us in X). But now I find that I have to raise the key of the entire piece a full step. Is there a way to add another Global Transpose layer to raise everything including the loops being that the are already using the transpose function?
Thanks,
Lee

Indeed...
Your work method is the way i used to do it initially but then found the same sort of problem you have come across....
Unfortunately any of the other global 'tuning' methods... only work for SIs and not Audio tracks.... so they are not much use.
Thank you. I appreciate your help.
You are welcome! Sorry i couldn't help more....
Cheers..
Nigel

Multiple video tracks to line up with audio- iMovie or Finalcut??

I am trying to make music videos, like this: http://www.youtube.com/watch?v=aEzpIAdsur8&feature=channel_video_title
I have iMovie, and my main problem is getting the video to line up with the audio. I can make the audio tracks like up just fine, but then I am stuck with just one video clip to use, I cant go back and forth between different video clips of me playing different instruments because I can't line them up perfectly with the song. Help?
I have been debating wether or not to get final cut express 4, because from what the reviews say it allows multiple video tracks to be used. Would that solve my problem?

This forum is for mobile iMovie (iPhone & iPad).
You may need the iMovie Mac forum:
https://discussions.apple.com/community/ilife/imovie

Global Track Tempo Line

Similar Messages

Maybe you are looking for