Global Web Applets and My Custom Home Page Report

Hello,
I setup a custom "My Home Page Report" which is great but does not display the report when you load the home page without clicking the "Generating analysis... Click here to view the results" link. Is there a way around this?
I then setup a a Global Web Applet and embedded this on the main home page. When doing this I found you cannot have 1 section that spans the entire width of the page as you can with a report (To my knowledge?). I then tried putting two Custom Web Applets side by side to display the graph and report I wanted. This works however, I have vertical scroll bars although the reports are perfectly displayed and do not require any scrolling. Is there a way to get rid of the scroll bars?
Regards
Innoveer

Innoveer, you can contact customer care and ask them to provision your On Demand application with the custom homepage "Execute Report Immediately" option. However, you want to make sure that this custom report loads quickly - if not it will delay the loading of your homepage.

Similar Messages

  • Why do my appearance add-ons disappear and my custom home page revert to default whenever I close Firefox?

    These items work fine and stay functional when I keep the browser open, but as soon as I close it, then open it later, the appearance add-ons disappear from my add-ons list and my home page reverts to the default.

    It is possible that there is a problem with the file(s) that store the extensions registry.
    Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    https://support.mozilla.org/kb/Unable+to+install+add-ons

  • TS1398 safari shuts down and goes to home page after 6.1.2, any body else ?

    Safari shuts down and goes to home page on some web sites after 6.1.2 install, any body else have this issue ?

    Safari shuts down and goes to home page on some web sites after 6.1.2 install, any body else have this issue ?

  • I accidently "x" off the download of firefox 4 before it had finished and now the home page doesn't work, i tried redownloading firefox but that didn't work is there a way i can resume the download?

    I accidently "x" off the download of firefox 4 before it had finished and now the home page doesn't work. it loads but then wont let me search from it? i tried redownloading firefox but that didn't work is there a way i can resume the previous download?

    Your More system details list show that you run the latest Firefox 4.0.1 version.<br />
    You can check that via Help > About Firefox and on the Help > Troubleshooting Information page.
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See:
    * https://support.mozilla.com/kb/Server+not+found
    * https://support.mozilla.com/kb/Firewalls
    If you posted from another computer then download the full version and uninstall the currently installed version.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Have Firefox home page set for Google search, but each following tab opens w/Yahoo search instead. How do I remove the Yahoo and have Google home page on every tab????

    As I said above: I Have Firefox browser home page set for Google search, but each following tab (but suddenly now it) opens w/Yahoo search instead. How do I remove the Yahoo search off the added tabs and have Google home page/ blank tab (like it used to be) on every tab????

    The new Firefox Start Page - '''about:home''' - isn't the same homepage that was used in earlier versions of Firefox - http://www.google.com/firefox There is no "setting" for the "Search Container" on the about:home "page" - in the Options UI or in about:config .
    Set that old "Mozilla Firefox Start Page" as your "homepage". <br />
    http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
    Or open your Profile folder and delete the '''webappsstore.sqlite''' file and hope the "Search Container" on the about:home "page" returns to Google. When it '''''is''''' Google, the Google logo appears to the left of the "Search Container"; when the search engine there has been changed to something else, there is no logo to the left of the "Search Container" - AFAIK.

  • Javascript to Display message and return to home page

    Hi
    I have a requirement to display an acknowledgement message after a button has been pressed and return to home page.
    I created some JS and tested on a standalone button.
    <script type="text/javascript">
    function GoToHome_ack()
    alert("Authorisation Created!");
    // goto to page 1
    location.href = "f?p=&APP_ID.:1:&SESSION.";
    </script>
    Now the problem is I need to call this code after I have successfully executed 2 Processes conditionally on a Create Authorisation Button
    The only logical place I tried to place the call was on the conditional Branch URL, because I need the Processes to execute first.
    javascript:GoToHome_ack();
    Unfortunately this failed
    Anybody any suggestions ??
    Regards
    Ade

    Hi,
    Quickly what come my mind is that create blank page and place to HTML header
    <script type="text/javascript">
    alert("Authorisation Created!");
    // goto to page 1
    location.href = "f?p=&APP_ID.:1:&SESSION.";
    </script>Then branch to that page instead javascript:GoToHome_ack();
    br, Jari

  • Home page report doesn't automatically generate

    user has to click on link before report generates. how can i get the report to pregenerate like all the other home page reports

    Phone customer care and ask them to turn on the "Execute report immediately" option and then edit your home page report web applet and there will be a tick box to execute it immediately.
    cheers
    Alex

  • Unable to retrieve Home page report immediately after log in

    I Created a new report and made it as a Homepage report. But unlike the other delivered home page report it is not giving the data immediately, It says "Generating analysis... Click here to view the results" and once I click this link I get the prview. Can you please let me know what the issue is?
    Thanks,
    Vamsi.

    Hi Vamsi,
    Ondemand support would generally be able to set this option "ON" to load immediately if you raise a request
    On the other hand if you deliver the report through iframe, then it gets loaded automatically
    -- Venky

  • When I open firefox, the web address ishows my chosen home page but the window shows "untitled" and I am unable to connect to any site to the internet.

    I chose the New York Times site to be my home page and when I open Firefox this address appears in the web address panel. But in the tab box it says "untitled" and I don't connect to any web page. I have tried reloading firefox, nothing seems to work. How can I stop this?

    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See:
    * [[Server not found]]
    * [[Firewalls]]

  • Popup window and navigate to home page visual web part SP 2013

    I've a visual webpart where i am inserting items in the list in the button click event as below
    protected void btnSubmit_Click(object sender, EventArgs e)
    SPSite site = new SPSite(SPContext.Current.Site.OpenWeb().Url);
    SPWeb web = site.OpenWeb();
    SPList list = web.Lists["Request"];
    SPListItem item = list.Items.Add();
    item["Title"] = txtBoxTitle.Text;
    item.Update();
    Now after items is being added in the list i want to show popup window with message showing that
    "item has been inserted and click here to go to home page of the site"
    how do i achieve this can anyone help in this
    Note:there is a restriction in our requirement so only sandboxed solution can be used so i want resolution for sandboxed solution 

    You can' t use criptManager.RegisterStartupScript for redirection in sandbox solution.
    Please find the below reference
    http://social.msdn.microsoft.com/Forums/office/en-US/bd37b640-e225-41c0-8344-9f3b52fe0434/open-popup-window-and-redirect-user-to-home-page-in-sandboxed-solution?forum=sharepointdevelopment
    You have one more option to open a popup SP.UI.ModalDialog
    Please find the below reference
    http://msdn.microsoft.com/en-us/library/ff798375.aspx
    http://blogs.msdn.com/b/chaks/archive/2011/09/14/modal-dialog-box-in-sharepoint-sandbox.aspx

  • Firefox will not support web dynpro on my employers home page and it use to

    My employer uses web dynpro and has for awhile now. When I try and look at my our e-payroll site it says my browser does not support web dynpro.... why now when it always worked before???

    I had this problem as well, but was able to solve it using this procedure:
    - Close firefox from the menu (don't use the 'x' as firefox may continue to run in memory for a while)
    - in your start menu, enter the following into the "run" prompt: firefox.exe -P
    - The firefox profile manager will open (see attached image)
    - In my case I deleted the "default" profile because I didn't care about losing any settings. You may want to simply create a new profile instead in case you need to save your settings.
    - To avoid being asked about which profile to be used you can highlight your new profile and then make sure the "Don't ask at startup" checkbox. When ready, press the "Start Firefox" button.
    - Voila! That fixed it for me. Like I said, I just created a new "default" profile and everyone worked fine for me; use your own judgement here.
    Good luck!

  • Need to create custom home page for iProcurment.

    Hi,
    I have an issue in iProcurment.
    i have modified the Menu name from "Requisitions" to "My Requisitions" in custom responsibility "XX iProcurment" its a replica of standard iProcurment responsibility.
    then i clear the Cache and bounce the middle tire even though the changes are not reflecting. But when i do the same changes in the standard iProcurment responsibility then i am able to see the changes.
    Create a main menu XX_ICX_POR_SSP_HOME its a replica of ICX_POR_SSP_HOME then attached to XX iProcurment
    Menu:                XX_ICX_POR_SSP_HOME
    User Menu Name: XX Internet Procurement Home
    Menu Type:          Standard
    Description:     Internet Procurement Home
    seq          Prompt                         Submenu                                        Function                              Description     
    1          iProcurement Home Page                                                       POR SSP HOME                         Internet Procurement Home Page
    3                                        XX iProcurement: Homepage menu
    4                                                                                     EAM Function To Launch IP
    5                                        iProcurement: Function Security
    6                                        iProcurement Preferences Menu Container                                             iProcurement Preferences Menu Container
    Sub menu:
    XX_ICX_POR_HOMEPAGE_MENU its a replica of ICX_POR_HOMEPAGE_MENU
    Menu:               XX_ICX_POR_HOMEPAGE_MENU
    User Menu Name:     XX iProcurement: Homepage menu
    Menu Type:          Home Page
    Description:     iProcurement Homepage menu
    seq          Prompt               Submenu                                                  Function                              Description     
    5          Shop                    XX iProcurement: Shop                                                                      Shop tab
    10          My Requisitions          iProcurement: Requisition Status                                                       Requisition Status tab
    15          Receiving          iProcurement: Receiving Home Page Menu                                             Receiving tab
    20          Contractors               iProcurement: Contractor                                                                 Contractor tab
    25                                   iProcurement: Common Functions                                                            Common iProcurement Functions
    30                                   iProcurement: Global Menu                                                                 iProcurement Global Menu
    35                                   ICX_STANDARD_GLOBAL_MENU                                                                 ICX Standard Global Menu
    40                                                                                          iProcurement                         iP Product Branding
    Hear i am changing the prompt of "Requisitions" to "My Requisitions"
    i have modified the function XX_POR_SSP_HOME its a replica of POR_SSP_HOME
    x_object=AppsServlet&x_source=menu&x_menuFunction=displayHomePage
    OA.jsp?OAFunc=ICX_POR_LAUNCH_IP&OAHP=XX_ICX_POR_HOMEPAGE_MENU&OASF=ICX_POR_LAUNCH_IP&porMode=accessHomePage&OAPB=ICX_POR_IP_BRAND

    Do you have much experience working with HTML & CSS code?
    Does this project need to work well in all devices; not just tablets?
    If the answer to both question sis Yes, I recommend Dreamweaver.
    If the answer to both question is No, use Muse.
    Nancy O.

  • How to network install latest firefox with custom home page

    I'm trying to figure out how to do a network install with the latest firefox, but customized to have the default home page setup for the companies intranet web portal. I have several thousand computers that need the installation and pushing via network is the only realistic method, but I can't find a solution on how to change the home page for this. Please help!

    See:
    *http://mike.kaply.com/2012/08/29/setting-the-default-firefox-homepage-with-autoconfig/
    * https://addons.mozilla.org/firefox/addon/cck/

  • Photoshop Web Gallery - how to include home page link

    I have included a web gallery (created in Photoshop) to my website. Everything works fine; however, after scrolling through the photos there isn't a link to help return to the site's home page. The only option is to click the back arrow many times until you get there. Any ideas how to do this?
    Thank you.

    Kat,
    Your IE7 settings may be the same as mine, for which I generally keep the Pop-Up Settings fitering level to "High", thus blocking all pop-ups. At this level, I find all of Geoff's links for his Aerial Photos (but curiously not those on other pages) and text links on the Links page are treated as pop-ups. At the Medium level that automatically blocks "most" pop-ups, all links open to a new window for me. IE7 treats all links creating new windows or tabs as pop-ups, and you can control how they behave by changing the Tabbed Browser Settings options for "When a pop-up is encountered". Here's how to get there:
    IE7 Tools Menu (or Control Panel) > Internet Options > General tab page > Click "Settings" in the Tabs category and then check the option desired in the resulting dialog.
    Regards,
    Daryl

  • Making an entrance page and an index (home) page query?

    Hi All,
    I've not done anything this way before but for a uni web design and development assignment, I've to firstly design a website with all the theory and how it will all come together.
    Therefore, I'm wanting mine to be a little different from the generic kind and whilst I'm basing my subject matter on Tigers and the several species of, I'm creating an entrance page in fireworks that is the following;
    I'm planning on sectioning up and placing hotspots around the interior of the tiger body, this will enable viewers to select and go to set pages like "about" "tiger zone" "contact" and so on.
    However, I still need a traditional-ish homepage but I'm unsure how to make it that whilst people come in via the entrance page ( as above and the main url) whenever they've left this page to go in to the main homepage, they don't return via any of the main sites navigation menu / links back to this entrance page, is this possible in anyway?
    I'm trying to get my own head around this and I have spent a number of hours researching this issue but I cannot find any resource that is anything like what I'm needing to do.
    Thanks as always people.
    Regards,

    Yes, 2nd landing page will be the 'traditional' homepage.
    This case, the tiger page will have to be 'index.php' so it'll load when your site is entered in a browser. Why PHP - we'll get to that in a bit.
    Let us use, lets say a cookie to see if the user has already been on your index.php (which is your tiger page). If they already have, they will be taken to index2.html (the 2nd homepage - which doesn't have to be php as we aren't using any cookies/ sessions here).
    Something like this should work:
    <?php
    // please note there is a dot prefixed in '.yourdomain.com':
    setcookie('homepage', 1, time() + 365*24*60*60, '/', '.yourdomain.com');
    if(!empty($_COOKIE['homepage']))
       header('Location: http://yourdomain.com/another_page.html');
       exit;
    // you could add more PHP code (if you require), but ensure this patch of code is right at the top of your tiger index page
    ?>
    This should be placed at the very top of your tiger index page which is your initial homepage when users enter your site.
    This is how it works:
    homepage - the defined name for this cookie
    1 - enables the cookie
    time() - expiration value for the cookie. The value suffixed with 'time()' is for 1 year - meaning the cookie will remain active for 1 year. If you want it to exist until the browser is closed, set it 0 like this:
    setcookie('homepage', 1, 0, '/', '.yourdomain.com');
    The / next to time is the areas within your domain that the cookie is available for. / denotes higher most domain path. This is useful if your index.php file (main splash page) is located within the main domain root itself. If not, if it is located somewhere like yourdomain.com/tigerhome, set that to this:
    setcookie('homepage', 1, time() + 365*24*60*60, '/tigerhome/', '.yourdomain.com');
    Please notice the trailing and prefix slashes for the folder value
    yourdomain.com - is the main value of your domain itself. Please note the prefixed dot [.] before the yourdomain.com.
    How the header works:
       header('Location: http://yourdomain.com/another_page.html');
    If the cookie called 'homepage' exists, then when the user is trying to load index.php, the header condition is read by the browser first. If it is true, the user is taken to another_page.html. If not, the user is allowed to continue viewing index.php page.
    The reason we have this at the very top is because when the user attempts to load up index.php page, you dont want the content to be shown before redirect happens. Hence, the header condition along dependant on the cookie is first read by the browser.
    If you want custom time setting - maybe 1 day, set it to this:
    setcookie('homepage', 1, time() + 1*24*60*60, '/', '.yourdomain.com');
    5 hours, this:
    setcookie('homepage', 1, time() + 1*5*60*60, '/', '.yourdomain.com');
    And so on...
    Note: The cookie will expire if the user clears browser cookies manually!
    But this is the basic way of getting a cookie set for getting what you want done.
    Also, I've set up a test page on my domain for you - expires in 1 year from first visit. Loads on index.php and redirects to test2.html if the cookie is already set. Try it out for yourself here.
    Trust this helps.
    -ST

Maybe you are looking for

  • Help with making JLabel visible for a few seconds only

    Hello guys, I need help with making a JLabel object visible for a few seconds only and disappear when a JButton has been clicked. Here is piece of code where I add mouse listener to the JButton object in my case is (jrbFigure1) and when is called set

  • TS3988 can a computer have multiple icloud accounts?

    My husband just got an iphone and I created an apple id, but I can't get his icloud created..it just defaults to mine?

  • How do I move my itunes library from my hard drive to an external hardrive?

    I am trying to free up storage space on my imac hard drive.  I have one external hard drive with 500 GB storga and then another 2 TB external hard drive that I am using as my time machine back up of everything.  I moved my itunes library (approx. 70G

  • Hiding a column in smartform

    Hi, We have a requirement where we should be able to hide columns in smarforms based on input from webdynpro. We can pass info as to which column is to be hidden. But we do not want blank columns in between.Columns are separated by lines. Please help

  • Mail Adapter - Dynamically maintaining To and From Parameters

    Hi all, I am using the mail adapter as receiver in my scenario where i need to set up the TO and FROM parameters dynamically in the adapter configuration. Can any body please suggest how to do that? Thanks -Kulwant