Globe SIM card doesn't work with my iPad

I really desire to use my iPad as my alternate Text messaging gadget but the problem is my Globe micro-SIM doesn't work on it. The name and Signal strength of my Telco, however, do appear on the upper left corner of my iPad. I cannot send text messages from my iPad using my Local service provider (Globe Telecoms Philippines). Any suggested solution to my problem, please...

The micro-SIM on an iPad is used only for internet data connection (web browsing, email, etc.), not SMS or voice.
Depending on what facilities are available to the people with whom you wish to communicate, you might be able to use one of the many internet-based forms of messaging. (For example, iMessage within the Apple ecosystem, AIM, Jabber, or GoogleTalk.)

Similar Messages

Why my nano cut sim card doesn't work on iphone 5c?

why my nano cut sim card doesn't work on iphone 5c?

Cut cards often don't work. Get a real nano SIM from your cell carrier.
Regards.

My brother have given me his I-phone3, But he lives in US, he has given his phone in India, The sim card is not working with the phone. What should I need to do.?

My brother have given me his I-phone3 But he lives in US he has given his phone in India The sim card is not working with the phone What should+I need to do?

Send it back to him and have him unlock the phone for you so you can use it with your carrier.

Small CF card reader that works with the iPad Camera Kit?

I'm looking for a small (not much bigger than a CF card) CF Card reader that works with the iPad Camera kit (USB piece) - Anyone know of one?
All the ones I see people suggesting are big and bulky (made for a desktop). I know there are many smaller ones, but that the iPad camera kit doesn't work with everyone. Anyone know one that works with it?

My set up, quite compact for travel, this is a no brand version but I have seen other ones branded Integra or something similar.
http://farm5.static.flickr.com/4029/4713475185b52dae86bdb.jpg

The airplay in apple tv doesn't work with my ipad

I have problem the apple tv.
Why the airplay in the apple tv doesn't work with my ipad,every time i set the password in the air play it won't allow and the (clear password) come out on the screen

connect the atv to a tv which does support the resolution and then lower the resolution and then connect it with your tv once more

Satellite M40-129: PCMCIA Card doesn't work with Linux

I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
Any idea why it doesn't work with my M40-129 ?

Hi
Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
http://newsletter.toshiba-tro.de/main/
You should check the OS machine compatibility and the other areas.
Im sure you will find many useful tips.
Good luck

Ethernet card doesn't work with new arch install?

Hi guys,
so this is kinda my first post, not that I'm new to arch i just never had an issue i couldn't figure out on my own... But i love arch i have been using it for about a year now and have had no serious problems except for this. I have had arch running on an older dell vostro 200 desktop before i reinstalled with a vary similar issue except that the fix i came up with doesn't work anymore. I will tell you about the first issue first because i ALMOST posted on here about it originally but i figured out a way to make it work even though it was a hassle.
After cold/rebooting my computer the network card doesn't work at all. lspci reported that the kernel module e1000e was the correct one (i have verified this) and that the kernel has loaded it, i verified that with dmesg but still it wouldn't work. After much much anguish and hairpulling, I realized that it had to have something to do with the module so i tried forcing it to reload with rmmod e1000e and modprobe e1000e and it still wouldn't work until i physically unpluged the ethernet cord and pluged it back in until the light on the NIC turned on. After that everything works as normal i could even unplug and plug it back in with no problems. So eventually i wrote a script that did this for me (except for the uplugging and plugging part) and i used that when i cold/rebooted.
But now i have the exact same issue after reinstalling arch to the T except for the fact that the (crazy) fix i came up with doesn't work now. I used my "fix" after booting from the arch cd and it worked just like it always has. And now after rebooting into my fresh system the fix doesn't work anymore. So now i'm back where i was to begin with but i have no idea what to try next. I didn't do anything particularly different during installation except i added a udev rule for the e1000e module just to see if somehow that would fix the problem... it didnt and i have since deleted that (to see if it was the problem). The only other thing that is different is the root and home are now btrfs partitions instead of ext4.
I have booted several other live cds and dvds (diferent distros) including arch derivatives such as manjaro and they all worked just fine, using the same kernel module (e1000e). I'm not sure what that could mean but i know that it means there is a fix for this some way or another. I am going to hook up a wifi adapter and connect that computer to the internet to put some more information up if it's needed (asked for) but for now lspci -vnn | grep -i -A 10 net reports
00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
Subsystem: Dell Device 0238
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at fdfc0000 (32-bit non-prefetchable) [size=128k]
Memory at fdfff000 (32-bit non-prefetchable) [size=4k]
I/0 ports at ff00 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Vendor Specific Information: Len=06 <?>
Kernel driver in use: e1000e
Kernel modules: e1000e
ip a reports:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: enp0s25: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:1d:09:8c:36:f6 brd ff:ff:ff:ff:ff:ff
4: wlp0s29f7u3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 64:66:b3:16:92:10 brd ff:ff:ff:ff:ff:ff
inet 172.16.1.55/16 brd 172.16.255.255 scope global wlp0s29f7u3
valid_lft forever preferred_lft forever
inet6 fe80::6666:b3ff:fe16:9210/64 scope link
valid_lft forever preferred_lft forever
lsmod | grep e1000e
e1000e 215644 0
ptp 17692 1 e1000e
any help on what to do next would be greatly appreciated.
Last edited by mvheart/dev/null (2014-08-18 04:02:12)

Sorry I was thinking that it was say "state up" after that, I was looking in the wrong place... It's been a long time since I was playing around with this. So it is as i thought it was before?
[aaron@arch-box Arch-Linux]$ sudo systemctl start [email protected]
[sudo] password for aaron:
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
[aaron@arch-box Arch-Linux]$ systemctl status -l [email protected]
● [email protected] - dhcpcd on enp0s25
Loaded: loaded (/usr/lib/systemd/system/[email protected]; disabled)
Active: failed (Result: exit-code) since Mon 2014-08-18 11:20:29 EDT; 4min 11s ago
Process: 17650 ExecStart=/usr/bin/dhcpcd -q -w %I (code=exited, status=1/FAILURE)
Aug 18 11:19:59 arch-box dhcpcd[17650]: version 6.4.3 starting
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: adding address fe80::ae3:ee04:7099:77c5
Aug 18 11:19:59 arch-box systemd[1]: Starting dhcpcd on enp0s25...
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: waiting for carrier
Aug 18 11:20:29 arch-box systemd[1]: [email protected]: control process exited, code=exited status=1
Aug 18 11:20:29 arch-box systemd[1]: Failed to start dhcpcd on enp0s25.
Aug 18 11:20:29 arch-box systemd[1]: Unit [email protected] entered failed state.
Last edited by mvheart/dev/null (2014-08-18 15:50:10)

IPhone 5 sim card doesn't work

Hi,
One day the SIM card in IPhone 5 just stopped working. I can see the network on the desktop and in general settings, but it does not work for real. I can't make a call, send a message or get internet. Sometimes it goes "No service", "Searching" but then goes back.
I have checked this SIM card with different phone - it works properly good. Any different SIM card in my IPhone also doesn't work.
So I went to the Apple Store (Indonesia, Denpasar, Bali) they said you need to reset all the content and settings. So I did all and nothing happened.
Again SIM doesn't work - same situation. What is interesting sometimes I'm getting messages from the network so it seems that SIM card works some time but I can not make any calls or actions with SIM.
In the App Store guys told me this might be a hardware problem which could not be solved it's just broken.
They say you can exchange an IPhone for the new one but not in Bali because they don't have IPhone 5 anymore. Is it fair?
Please help me what can I do and how can I make my IPhone works or exchanged it for a new one.
I will be in Malaysia, Kuala Lumpur on February 7th. Can I exchange my IPhone here?
Version 7.1.1 (11D201)
was bought in USA 2,5 years ago
I live in Bali, Indonesia
Thank you in advance for any help.
Best regards,
Yulia

Thank you. I bought IPhone in USA 2 years ago.
"The iPhone warranty is not international" - it's very sad. Just wondering why people in the Store told me different things.

My sim card will not work with my Iphone but will for other Iphone's, My sim card will not work with my Iphone but will for other Iphone's

When I put my sim card in it comes up with no service. But I put it into a friends one and it started to work and recieve text. I'm not sure why it's doing this and what to do to solve it. Does anyone know?

Most likely you phone is locked to another carrier. Also, see this:
iPhone: Troubleshooting No Service

MacPro eSata Port/Card doesn't work with new Hard Disk

I just bought 4 x 3TB Hard Disc http://tinyurl.com/d2rglvn (specs of disc)
Which I put in Macally Enclosures to work on my Barracuda internal Hard Drive externally http://tinyurl.com/clg8yjo
I already have like 5 x 1,5 TB that works perfectly well with eSata connections (with exact same enclosures)
**My problem is that my 4 new Hard Discs works really fine with my Mac Pro but only with the USB connections but won't work with the eSata Connection. I tried it on a MacBook Pro with an ATA to eSata adaptor and it works perfectly fine (So my discs are not the problem) **
I am working on a Mac Pro (bought in 2007) - Mac OSX 10,6,8 and this is (I think) the card where I put the eSata :
PCI Card :
pci1095,3132:
Type:    Other Mass Storage Controller
Driver Installed:    Yes
MSI:    No
Bus:    PCI
Slot:    Slot-2
Vendor ID:    0x1095
Device ID:    0x3132
Subsystem Vendor ID:    0x1095
Subsystem ID:    0x3132
Revision ID:    0x0001
Link Width:    x1
Link Speed:    2.5 GT/s
I am kind of new using Mac and its support so what want to know is :
Do I need to update my PCI Card ? If yes how can I do that ?
If not, what can I do to make my disc work ?
My disks are eSata III (6GB/s) is it compatible with my Mac Pro ?
Thank you Very Much for your time

Difference between the disk that works in eSata and those that doesnt is this....
Works : ** 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5"
Doesn't Work : **3TB, SATA III (6Gb/s), 3.5", 7200RPM, 64MB
it is probably the problem but i don't know what to do to fix it !

T-Mobile SIM card won't work with my replacement factory unlocked iPhone 5

On Saturday, my rear camera on my factory unlocked iPhone 5 stopped focusing. I took it in to my nearest Apple store and they replaced it. Problem is, now I can't get my T-Mobile SIM card to work with the replacement phone. The guys at the genius bar sent me to T-Mobile to see if a new SIM card would fix the problem, but I'm still getting an "Unsupported SIM" error when I try to activate the phone. Any insights?

Do you have information about the model no. of original purchase that is printed on the back cover ?
What is model no. of the replacement iPhone 5 ?
If T-mobile SIM worked on the original purchase and does not work on the replacement iPhone 5, they gave you a wrong model.

Keynote Remote Doesn't work with iPhone, iPad

Hi,
I have the latest versions of Keynote on my iPhone 5S, iPad 4 and MacBook Pro 13" with Retina Display.
All three devices on the same WiFi network. Using WiFi I was able to remotely control/play the presetatnion between iPhone 5S and MacBook.
However, it doesn't work between iPhone 5S and iPad 4. Any help ?
I tried Bluetooth as well. They seem to not discover each other and neither able to remote control.
Any tips ?
Thanks.

After having to upgrade to the latest version of iOS Keynote (because I edited one of my presentations online through iCloud), I received the message that Keynote Remote is to be discontinued. The alternative they offer is to download Keynote onto your iPhone as they have integrated the remote feature into the full program.
The problem that I found is that space is more of a premium on my iPhone than my iPad and I don't use the full program on the iPhone, as the remote app takes only 3MB and the full app? 444MB.
I hope Apple receive similar complaints about this as nearly half a Gig for what will amount to a remote for Keynote is preposterous. I have already purchased my 16GB 5S, it's not as if I can put more memory in it now.

Javascript created in fireworks doesn't work with touch ipad and mobile devices.

My website was created in DreamWeaver.
Navigation is a popup/dropdown menu run by javascript created in FireWorks
Website: www.woodstockchamber.com
Problem:
The mouse over doesn't work on iPads and mobile devices.
The menu opens up and the category highlights, but that is where the action stops.
It doesn't complete the action and link.
It has worked well for years on desk tops and laptops.
This is a serious issue for me as iPads and mobile devices are so popular and used a lot in this tourist town.
Thanks,
Norm

http://www.smashingmagazine.com/2010/05/28/web-development-for-the-iphone-and-ipad-getting -started/
http://www.inspiredm.com/2010/02/09/ipad-design/
http://blogs.sitepoint.com/2010/06/23/develop-for-ipad-with-html5-trial-and-error/

IRig HD doesn't work with my iPad 2

Hello,
I recently purchased an iRig HD to plug a guitar into my iPad 2, but when I connect it I get a message that says "Cannot Use Device. iRig HD: Not a supported device". My understanding was that the iRig HD was compatible with the iPad 2. I have been in contact with IK Multimedia the makers of the iRig HD who suggested I return it to them. They tested it on their iPad 2's and it worked for them. They then sent me a replacement iRig HD to try and I again got the same message so it would seem its something to do with my iPad. Is there anything I can do to get it to work otherwise I'm going to return it?
Thanks

I have just discovered that my irig hd no longer works in garageband for ipad 2. In fact it no longer works in Amplitube! I get the message not supported. Irig have suggested I locate my receipt, which suggests they might ask me to return it, but the thing is my earlier version of irig also does not work. The chances of two irig guitar jacks suddenly packing up at the same time are pretty remote, so it has to be a software issue.

Intel Wireless Card doesn't work with Linksys?

My wired computer works great with the WRT54GX2, but my wireless cannot hold a signal for very long. Support says they can't help me because I have a Intel wireless card. Intel does not support for that card anymore and I can't see where to buy a Linksys card. Please, help.
Bonnie

check the link for the linksys retailers
Retailers
Message Edited by Maximus on 07-21-2006 05:48 PM
I do know everything, just not all at once. It's a virtual memory problem.

Globe SIM card doesn't work with my iPad

Similar Messages

Maybe you are looking for