Globe user here..

My network here in the Philippines is Globe..

OK... what is the aim of this post?
Posts are put up to highlight an issue or fact so as to inform other users or seek their help.
Please make sure you post responsibley next time
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

Similar Messages

New itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari HELP

new itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari after i type in the password PLEASE HELP ive turned on and off etc

My guess is that the security settings on your router and iPod do not match.
For a test, change your router so there is no security. See if you can connect and get to the Internet. If that works, set up the router with security and use the same settings for the iPod.

I'm a beginner of CS3 and a mac user, here I got a question need some help.

Hi All Masters,
I'm a beginner of CS3 and a mac user, here I got a question looking for some help.
Does anyone know there's a work for editing the photo to painting styles such as watercolor painting, oil painting, pastel drawing, colored pencil or pencil sketching in Adobe serials ?
If not, does anyone know any software offering these features,

The best overall art styles plugin for PS is probably AlienSkin's SnapArt. I'd say their filters are a cut above Photoshop's which are old and have never been updated.
http://www.alienskin.com/snapart/snapart_examples.aspx
That being said, the best painterly interpretations of photographs I've ever seen are done with Painter.
http://www.corel.com/servlet/Satellite/us/en/Product/1166553885783#tabview=tab0
There is a basic version sort of like Photoshop Elements which is still better than Photoshop for artistically rendering photos into 'paintings.'
http://www.corel.com/servlet/Satellite/us/en/Product/1190317151777#tabview=tab0

It seems that many (if not all) of my files have been replaced by older versions. I kind find the multiple versions (listed in the Search as in the same dir) and restore them but this is strange. There is no chance that another user here has done a restor

It seems that many (if not all) of my files have been replaced by older versions. I can find the multiple version including the most recent version using the Search, however, they show up in the same directory even though Finder only shows a single copy. I am able to save and then overwrite in order to restore but this is strange. There is no chance that another user here has done any sort of system restore action (at least intentionally).

I can find the multiple version including the most recent version using the Search, however, they show up in the same directory even though Finder only shows a single copy.
In a OS Extended (HFS) file system there is no way you can have two files with identical names in the same directory.
Of course who knows what spotlight is thinking of most of the time when it does its stupid searches (get Find any File instead) and lists its results? Are you sure it is listing the same directory or do you have a backup and it is finding it there and you aren't noticing it is two different volumes?
You could also try reindixing the volume. Add it to the Spotlight system preferences Privacy and then remove it.

New user here. Trying to import iPhoto 9.4.2 libraries into Aperture 3.4.3 as referenced files. When accessing File Import Library, it finds the iPhoto library just fine, but then imports it as Master files. No option that I can find to leave the photos

New user here. Trying to import iPhoto 9.4.2 libraries into Aperture 3.4.3 as referenced files. When accessing File>Import>Library, it finds the iPhoto library just fine, but then imports it as Master files. No option that I can find to leave the photos in place on the file system. All the literature says their should be an option to choose, but I never get that option. What?

All the literature says their should be an option to choose, but I never get that option.
That has been true for the previous Aperture versions. Now Aperture simply treats the original image files exactly as they are in the imported library. Referenced images will stay referenced, managed will be imported as managed. But you can always relocate the imported managed images afterwards by using "File > Relocate".
Regards
Léonie

** New Install MBP from Tiger 10.4.10...Best Way? Any LOGIC users here?

Okay, before you say it, yes, am asking about LOGIC users here to see if they noticed an increase in FPU or DECREASE with new UPDATE, with first LEOPARD, there were spikes, and it used more CPU than TIGER (some are still waiting for Pro Tools)..
Anyway, what is the best way to update to Leopard and still keep my emails (10 different accounts) and just update to LEOPARD ? MBP is my lifeline and I don't want to back up, just install my NFS then go to update, will that work!
Thanks in advance!

Catherina wrote:
... What is the best way to do this?
The best way, really the only way, is to purchase Snow Leopard.
Online (UK): http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
Elsewhere: call the phone number in the Apple Online Store.
Apple's price is $19.99, £14.00, €18.
Snow Leopard is not available to download from any legitimate source.
Once you install Snow Leopard, upgrade iTunes to version 10.7 or the latest, iTunes 11.
iTunes 10.6.3 is the last version of iTunes to support Mac computers with Mac OS X 10.5.8 with either Intel or PowerPC processors, but since you have an Intel iMac, the best solution is to purchase Snow Leopard. Leopard is no longer available from Apple and prices from aftermarket vendors can be unreasonably high.

No Such User Here

Hello,
When I send message from [email protected] to [email protected] I am able to receive the message
But when I sent an message from [email protected] to [email protected] email address I get
====================
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
[email protected]
No Such User Here
------ This is a copy of the message, including all the headers. ------
Return-path: <[email protected]>
Received: from localhost ([127.0.0.1]:41109 helo=gvo23833.gvodatacenter.com)
by gvo23833.gvodatacenter.com with esmtpsa (TLSv1:DHE-RSA-AES256-SHA:256)
(Exim 4.82)
(envelope-from <[email protected]>)
id 1WNfKb-003o4H-10
for [email protected]; Wed, 12 Mar 2014 04:20:09 -0500
Received: from 115.252.97.195 ([115.252.97.195]) by 97.79.238.33 (Horde
Framework) with HTTP; Wed, 12 Mar 2014 09:20:08 +0000
Date: Wed, 12 Mar 2014 09:20:08 +0000
Message-ID: <[email protected]>
From: [email protected]
To: [email protected]
Subject: I am looking for a break
User-Agent: Internet Messaging Program (IMP) H5 (6.1.4)
Content-Type: text/plain; charset=UTF-8; format=flowed; DelSp=Yes
MIME-Version: 1.0
Content-Dis
Hello,
How are you doing today.....I want to ask you whether is it possible to
come for practice tomorrow.
Regards,
CD
====================
I have set reverse dns for my domain firsthagerstown.org 199.116.251.92
Need to fix this soon as I am losing money.

Hi,
Is there any smarthost or antispam apps configured for the outbound emails?
Please check whether other users in your domain can send messages to Hotmail.com. Also check whether you can send message to other domain accounts or just Hotmail.com.
Please confirm if you has installed antivirus or antispam software on the server. If there is one, try disabling it.
If other users also cannot send external messages, please get the send connect configurations of your Exchange server:
Get-SendConnector | fl
Thanks,
Winnie Liang
TechNet Community Support

Versa Mail "No Such User Here" and "Greylisting"

I'm new to the community. Usually when I try to reply to an email I get the response "No such user here" or I get a response saying the receiver is "Greylisted" and that I should try back in 300 seconds. What is going on? I couldn't find any info in the VersaMail guide.
Thanks.
Post relates to: Treo 755p (Verizon)

Can you compare your outbound mail settings with those from your mail service provider? In particular, do you have authentication enabled if that is required?
Post relates to: Treo 800w (Sprint)

New user here. Can I sync with Microsoft Outlook?

Brand new Driod X user here. Is there a way to set up my Droid X to sync with my Microsoft outlook contacts? While the Contact list on the Droid is nice and all when they converted over all my contacts from my Treo it messed up many of them and now I have to re-enter a lot of information and it would be easier to do that if i had my address book on outlook synced with the Droid.

davidmanvell wrote:
Brand new Driod X user here. Is there a way to set up my Droid X to sync with my Microsoft outlook contacts? While the Contact list on the Droid is nice and all when they converted over all my contacts from my Treo it messed up many of them and now I have to re-enter a lot of information and it would be easier to do that if i had my address book on outlook synced with the Droid.
Here is a link to the many possibilities to sync Outlook to the X
http://www.syncdroid.net/
Some costs money, some are free.

Hello apple community, I am Christian i am just wandering if my iPhone's embedded battery would bubble(get fat thingy) if I left it charging over nightly because last night I accidentally left it charging from 10 pm to 3 am thank you ,5s user here

Hello apple community, I am Christian i am just wandering if my iPhone's embedded battery would bubble(get fat thingy) if I left it charging over nightly because last night I accidentally left it charging from 10 pm to 3 am .. Note this happens for 3 nights also but not in a row, thanks in advance iPhone 5s user here .. First time with Apple

A few battery tips...
You can start using it out of the box, or charge it, whatever you like, doesn't matter either way.
You cannot overcharge the device, thus you can leave it plugged in as long as you like.
You can and should charge as often and as long as possible... deep discharges are hard on lithium batteries. Normal mobile use will usually result in the one charge cycle/month that Apple recommends although it's OK to fully discharge and then recharge to 100% every once in a while to recalibrate the battery meter.
http://www.apple.com/batteries/iphone.html

How many users here actually know when a problem occu

Like some users say "I got no problem"Do they actually know for a fact there is?no problem?Try to imagine someone driving with the E-brake on in their car. Did they notice?NO?Was it damaging?YES??

Cartel: I've used my X-Fi XtremeGamer with both Windows XP and Windows Vista and I've NEVER HEARD a single snap, crackle or pop while playing games or listening to music. I have never had a problem changing any settings like speaker settings, volume settings and other things I've seen posted here. Everything I have wanted the X-Fi to do it has?done and done it to my satisfaction, so what do you want me to do?Lie and say that the drivers/software?are FUBAR just so you and those who are experiencing problems can throw even more crap at Creative or tell the truth and tell you what I really experience, i.e. the X-Fi and it's drivers actually DO work with both XP and Vista?Am I extremely lucky and the only one who doesn't have problems? Not likely. Are there people out there who are having problems? More than likely... but that's doesn't mean that I can't say that the stuff is working at my end, does it's

New User Here: Changing the color scheme of console

Hi there...
My name is Zia and I am from Pakistan. I am primarily a Ubuntu user. But I needed a lightweight console-only operating system specifically for some work in Intel Assembly and a few other things which do not need X. Someone told me Arch was what I was looking for. So I installed Arch base as guest on VirtualBox and so far, it is impressively. It is running on mere 128M physical and 4GB pre-allocated HDD with very nice results. I did hack away with a few things and set the basic configs up myself. That's no big deal since I have a little background knowledge of how Linux works, from my experience with Ubuntu. Ubuntu, however is a little more resource hungry so I am going for Arch on VM.
Enough with my boring chatter. I am here to ask help. Please direct me.
The console looks pretty boring. I changed the console font while installing and I think I can change it again in /etc/rc.d if I want, but the font looks good. The major problem is colors. I googled it and there are plenty of threads specifying how to change the background/foregriund colors of TTY. But that is not what I want. You see, when I list the contents of the directory, I want all the sub-directories to be listed in blue, all the executables in green and rest of the normal files simply white or grey, whatever... The problem is, I am not sure how I would do that.
Someone at some thread mentioned an .Xdefaults. I didn't come across such a file tampering with my Ubuntu box so naturally I am not familiar with it. If that is what I need to master before in order to get what I want, I shall need links or on-thread help, please.
Thanking in anticipation. Zia
EDIT: I have not installed X. Just the base system with samba and a few other things. Should the .Xdefaults still control the console colors? I am not talking about the terminal inside X. I am talking about TTY.
Last edited by zia.newversion (2011-01-17 20:33:57)

echo "alias ls='ls --color=auto'" >> ~/.bashrc
That will append the alias mentioned in post 2 to your .bashrc which is where aliases are stored (you should run this as user for user's bashrc and root for root's bashrc). You will need to logout or issue
source ~/.bashrc
to get it to work.
For example I've aliased ls to ls -sh to give me file sizes
edit: fixed typo
Last edited by SS4 (2011-01-17 21:39:35)

New Mac user here.....

I actually have 2 questions. First I installed Growl for e-mail notifications. I later deleted the file using app zapper. I thought this deleted all files associates with the application but I still see preferences for Growl Mail in the mail app. anyone know how to delete this?
Also, I have been experiencing the same problems that many have had after the last update with periodic failures of mail to send messages. It usually sends with one of my 3 accounts after several attempts, and even though it fails only sporadically, it is very frustrating. I edited all my mail accounts and still have the problem. I was wondering if anyone was having this issue and it was fixed with the Snow Leopard upgrade since all the apps were updated in that OS.
Thanks for helping out and old PC user. Still finding my way around, but love the experience.

Greetings,
If you're able to set preferences for Growl in Mail, then you still have the Growl bundle installed, so you need to get rid of that, along with the Preference Pane for it. You'll find them here:
Home/Library/Mail/Bundles
/Library/Preference Panes
Once you remove those, you should be able to restart Mail and not have any problems with Growl.
As for your other problem, I don't experience the issue you describe, so I cannot help with that. I'm inclined to say it's a sporadic, temporary problem with the mail server of your ISP or email provider.

New Tour User Here

I'm a new Tour user and want to know if it's possible to enter new info into my calendar, memo pad, etc. on my computer and then sync with my Tour.
This tiny keyboard is killing me!

Hi and Welcome to the Forums!
A few things to discuss...so bear with me...
1) Contrary to how others do things, RIM does not provide a desktop PIM. Others force you to use their PIM and only their PIM. RIM provides a conduit software that functions as a bridge between your chosen PIM and the BB. See this KB for compatible PIM's:
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
2) RIM provides a Device Switch Wizard to migrate from another SmartPhone to a BB...but only for compatible devices. See this KB:
KB05459 How to use the Switch Device Wizard to switch from another smartphone to a BlackBerry smartphone
3) If your old device is not compatible with the wizard, then RIM further provides the ability to import from ASCII and CSV files. See this KB:
KB04312 Create and synchronize with an ASCII export file
KB11194 How to import contacts from an CSV file to the BlackBerry device
Sorry, but RIM provides no assistance on how to get your data out of your old device and into the ASCII or CSV format...that's a function of your old device.
So, your choice is, IMO, to keep using a desktop PIM to manage your data (and you should, IMO)...then choose a compatible PIM (from above). Then, get your data out of your old device and into the desktop PIM. Then, configure the BB to sync with the PIM:
KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Any clearbox lightbox widget users here? I have a question

I installed the widget on a test web page and it works correctly:
http://dirtysouthink.com/test/ch1/01_Begin/portfolio.html
When you click the dog tattoo thumbnail, the picture pops up in front of the panel to show a larger picture. You never leave the page.
HOWEVER:
When I install the same widget, the same way on the main site, when you click on any of the tattoos, the thumbnail targets a new window to show the larger picture. In other words, the user leaves the page to see the bigger picture.
http://dirtysouthink.com/gallery/jason3.html
I have no clue what is different. I installed the widget the exact same way as I did on the test page. Everything on both installs are in their own directory and are not sharing any of the css or js so there should be no conflicts.
Any help appreciated
!! Problem Solved !!.................................
Thanks to a post I found by Sudarshan Thiagarajan
http://forums.adobe.com/message/4769062#4769062
The clearbox.js wasn't pointing to the right directory to where the page is located.
This is the line in clearbox.js
var CB_ScriptDir='js/clearbox'; // RELATIVE to your html file!
The fix is simple and am posting here just incase someone else is having the same problem.
I made this change
var CB_ScriptDir='../js/clearbox'; // RELATIVE to your html file!
Works like a champ now

You might have lost authorization would be my first guess. I would try re-authorizing first.

Globe user here..

Similar Messages

Maybe you are looking for