Glossary does not appear in merged project

Hi,
I am using RHX5 to produce help in HTML chm format. I have 14
separate projects which are merged into a master project, due to a
bug in RH in which the table of contents does not display correctly
I use HTML Help Workshop to compile the master project.
One of the 14 projects has glossary entries and so far I have
been unable to make the glossary entries appear in the master
project when it is compiled in HTML Help Workshop.
I have registered the hhactivex.dll.
I checked the glossary checkbox in the windows setup in both
the individual project and the master and I added a glossary entry
to the master project.
When I compile the project using RH then all the glossary
entries appear but the table of contents is messed up.
When I compile the project using HTML Help Workshop then only
the single glossary entry from the master project appears.
Anyone have any idea how to solve this problem?
TIA
Morven

Hi Morven. When you say your TOC is messed up are you
referring to the problem where the merged projects appear as a book
within a book? If so,
click
here for a method to get around it and use RH to compile your
output. If this is not the problem to which you refer, I'll crawl
back under my stone.

Similar Messages

Why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?

I took 6 panorama shots of a scene and used CC to Photomerge them as one. Couldn't see where to automatic blend the edges and there was 'stitch' lines when the images were merged. So i did the same in Elements 11 and it was perfect. Am i doing something wrong in CC or perhaps not doing something at all?
Any help, please?
Dave

Hi - Thanks for taking the time to reply and i appreciate the remarks- if a little harsh- we all have to start somewhere and i am fully aware of the limitations of Elements which is why i decided to add CC to my software. I can only say that if an inferior quality software from Adobe does the job well then CC must also be suited to doing the same which is why i can only think, from your comments, that i have not done something simple- however- following tutorials to get to the end result should have sufficed- it didn't so perhaps i will consider posting the difference between the two applications- and, perhaps suffer a few more 'harsh' comments. The learning curve is quite steep and i am a visual learner, but i'm also not totally incompetent:)
Kind Regards
Dave Munn
Original message----
From : [email protected]
Date : 02/02/2015 - 06:45 (GMTST)
To : [email protected]
Subject : why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
created by station_two in Photoshop General Discussion - View the full discussion
First a clarification: you are not addressing Adobe here in these user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
I'll give it my best shot anyway.
Few folks in this forum are really familiar with Elements, for which there's a dedicated, totally separate forum.
Different engineering teams, also.
From this perspective, it will be difficult to give you a direct answer to your "why?" question.
Personally, I blend very large panorama shots in Photoshop proper since I can't even remember when without any issues whatsoever, up to and including in Photoshop CS6 13.0.6.
Without being at your computer and without looking at your images, I couldn't even begin to speculate what you are doing wrong in Photoshop, which I suspect you are. The least you could show is post examples from your panoramas that have gone wrong.
I can tell you that panorama stitching requires significant overlap between the individual shots, besides common-sdense techniques like a very solid tripod and precision heads.
The only version of Elements I have ever used for any significant time was Elements 6 for Windows, which I bought in 2008 to use on a PC (I've been an avid Mac user for 30 years). I found Elements so limited and so bad that I successfully demanded a refund from Adobe. IU mention this only to emphasize that I can truly only address your question from a Photoshop (proper) and Mac user point of view. I couldn't care less about Elements, but if you have comparison examples of panoramas processed in both applications, by all means post those two.
Generally speaking Photoshop is a professional level application that makes no apologies for its very long and steep learning curve, while Photoshop has many hand-holding features for amateurs and beginners.
Perhaps the bottom line is that you should stick with Elements if you personally manage to get better results there.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7152397#7152397 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7152397#7152397
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Eclipse environment does not appear the options "Web Dynpro Project"

Hi all,
I installed the SAP NetWeaver 7.1 Composition Environment SP03
But in my eclipse environment does not appear the options "Web Dynpro Project" and not "Development Component Project".
That is, I can not do a Web Dynpro project
I have to do some more configuration in eclipse, for example, carry some plugin?
How to do this, please help me
Thanks,
Vivian

Hi,
         I think you are suffering from the problem below.
Problem Statement:
No Webdynpro Perspective is Visible
only perspectives available are
    Debug
    Resource(default)
    Team Synchronizing
How to Solve:
There are many ways that this kind of error can occur.
1.   It may occur due to "improper installation of NWDS"
How to Check and Resolve :    Is NWDS is displayed in intalled list in Control panel? If 'yes' then it is properly installed. If 'No' then reinstallation is needed.
2. It may occur due to "installation of Skeleton alone"
How to Check:
                                  you can check if your installation includes Web Dynpro by selecting
Help->Software Updates->Manage Configurations.
When installing Developer studio 7.1 you only get the bare eclipse installation (Skeleton). You have to add web dynpro and all, after the initial install is complete.
The installer installs the kernel of the Developer Studio. The kernel contains Eclipse and a few SAP additions, but is not equipped with the SAP features necessary for the Composition Environment. In order to install the required SAP features you have to install the SAP features.
           How to Resolve:
Updating the NWDS software will resolve the problem.
Go to Help->Software Updates->Find and Install. This will install the default SAP plugins that came with your NWDS CE 7.1 setup source and also the additional updates that are needed.

Template does not appear in project folder

Hi
My template has disappeared from my project. Therefore, I
have tried reimporting the template to the 'Templates' folder in
the project folder. When I do this, I do not get an error message.
But the *.htt file does not appear in the 'Templates' folder and I
cannot attach it to help texts?? When I open my file manager I can,
however, see that the *.htt file is indeed placed in the current
project. Can anybody help?
Thanks
Lena

Yep! These forums are littered with problems caused by
working over a network. RH is essentially an Access DB and this has
well documented problems with networks. Work off your hard drive
and back up to your network each night. That's works for me. Try
importing your template once you've copied your project to your PC
and come back if you still have problems. You may have to recreate
your template as it is not impossible that the .HTT file has become
corrupted.

HDR Pro Merge dialog box does not appear. The layer disappear. What are the solutions?

HDR Pro Merge dialog box does not appear.
The layer disappear. What are the solutions?

Hi Noel,
Actually, I just checked my scratch disk available space and it says ot is over 1.7 TB!! I am only using the C drive as my scratch drive, as that is my only drive. Anyway, I appreciate your help! Still will not function properly. Maybe I should try reinstalling Photoshop.
Cheers,
Russ

Just after i merged and cleaned my contacts, one contact does not appear in my caller id and messages even the contact is in my phonebook. I already tried disabling my yahoo and google accounts connected to my iphone 4 ios 7.1. stiill no luck

just after i merged and cleaned my contacts, one contact does not appear in my caller id and messages even the contact is in my phonebook. I already tried disabling my yahoo and google accounts connected to my iphone 4 ios 7.1. stiill no luck

Within Contacts, tap Groups at top left. Make sure all contact groups are checked to show, then tap "Done" at top right.

Process does not appear in project explorer

Hi all,
I have a little problem with NWDS: I moved a process dc from one SC to another and now the DCs does not appear anymore in the project explorer and thus I can not edit the process and it entities any further, Can anybody help me out here?
Thank you

Go to development infrastructure perspective, refresh the projects, select the DC and select "create project"

Spry menu bar does not appear over flash elements in I.E. 8

Hi, My spry menu bar does not appear over any flash elements in I.E. 8. Every other browser it workd fine. Can anyone please help? Thanks
A link to one of the pages is http://www.innervisionfilms.tv/pages/showreel.html
My spry code is
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    cursor: default;
    width: auto;
    font-family: Verdana;
    color: #000033;
    font-weight: bold;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
    z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: 130px;
    float: left;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    z-index: 1020;
    cursor: default;
    width: 8.2em;
    position: absolute;
    left: -1000em;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
    left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
    width: 8.2em;
ul.MenuBarHorizontal ul li a
    width: 10.2em;
    background-color: #4E81B4;
    left: auto;
    background-image: none;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
    position: absolute;
    margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
    left: auto;
    top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
    border-top-width: 0px;
    border-right-width: 0px;
    border-bottom-width: 0px;
    border-left-width: 0px;
    border-top-style: solid;
    border-right-style: none;
    border-bottom-style: none;
    border-left-style: none;
    border-top-color: #FFFFFF;
    border-right-color: #FFFFFF;
    border-bottom-color: #FFFFFF;
    border-left-color: #FFFFFF;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
    display: block;
    cursor: pointer;
    background-color: #EEE;
    padding: 0.5em 0.75em;
    color: #000033;
    text-decoration: none;
    font-family: Verdana;
    font-size: 11px;
    background-image: url(../pagelayout/menubg.jpg);
    font-weight: bold;
    border: 1px solid #003366;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
    background-color: #003366;
    color: #FFFFFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
    background-color: #003366;
    color: #FFFFFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
    background-image: url(../pagelayout/menubg.jpg);
    background-repeat: repeat;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
    background-image: url(../homepagelayout/greenbarbg.jpg);
    background-position: 95% 50%;
    background-repeat: repeat;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarDownHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarRightHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
    filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
        display: inline;
        f\loat: left;
        background: #FFF;

I still can't find a solution. Changing the parameter wmode:transparent works for .swf files but .flv files do not have the option to add this parameter. If you add it in the script manually it doesn't do anything. Any help would be greatly appreciated. I cn't find any solution online.
Thanks,
Adam

This file does not appear to be a photoshop file error.

Hello,
I know this has been covered a few times already, but none of the previous threads about it were able to help my situation.
Ok so here is what i did:
Exported a JPEG from a timeline in FCP. Brought that JPEG into PS (i am using CS3), and changed the image size from 1920x1080 to 720x480. Then saved as a JPEG, didn't tick any boxes, just used default save as settings.
I then brought those images into my Encore DVD Project, added them to the library, then placed one into a already made menu, and "sent to back".. so it became the new background. I did this with two menu's today. Note i have actually done this same exact process many times without problem. I then tried to build a dvd image of the project, and i got the "this file does not appear to be a photoshop file". Now it won't even let me open those menu's (plus another one, which i made a long time ago, and have even successfully built DVD's with), to edit them. I tried removing all the new JPEGS i added today, from the library, but still i get the same message.
The menu's that i now can't open, took a very long time to make, and i need to have this DVD completed ASAP.. as it is being released world wide in a couple of weeks and i need to get it replicated. So i don't actually have time to remake these menu's. So if anyone can help me, that would be much appreciated, as i have studio exec's cracking down on me.
Thanks in advance :-)

Now, if one Imports the JPEG with its extension changed to PSD as a Menu, then the Menu is created, including the necessary Layers. The Menu is NOW a PSD, and when Opened in PS will reflect the Layer structure (try this at home). If one had constructed Buttons in the JPEG, they would now only be graphics on that one single Background Layer in the JPEG. They would not function as Buttons, but could be useful graphics for other things. One would then need to add real Button Layer Sets to the PSD to be able to add any navigation.
Back in the post above, I suggested doing the Save_As to JPEG to see how things get changed. Use that in another test - Import that JPEG as a Menu. In Encore, try to Link to what had originally been Buttons in that Imported JPEG. What happens? Can you Link to them, even though you are now working with the created PSD?
Now, add a Button, or two, from the Library. Choose Edit in Photoshop, and look at the Layer and Layer Set structure. Things have changed from the original JPEG, with only the Background Layer. You now have that Library Button's Layer Set structure.
Good luck, and hope that this helps,
Hunt
Here are looks at the structure, using the Library Menu Business>Clock:
The Menu in PSD with the Layers Palette Open
Same Image With Layers Flattened to Save As a JPEG
What the JPEG Looks Like As a Flattened JPEG
The only way to Import that JPEG into Encore as a Menu would be to change the file extension to PSD, but what appear to be Buttons would NOT be Buttons, but just static pixels in the Background.
Message was edited by: Bill Hunt - Added graphics

Error Message** This file does not appear to be a photshop file

Okay.. so I have been researching forums and have seen this message throughout, my issue seems to be slightly different. When I am in Encore CS3 and trying to create a menu, I import my background designed in photoshop, have the buttons set up correctly, test it in the preview screen and everything works correctly, the file is recognized as a psd file, and even saves as a project in encore. When I go to build my DVD I get an error saying "This file does not appear to be a photoshop file, although when I check the properties it recognizes it as a psd.. any suggestions?

Adam,
Not sure that I understand this message:
And Actually yes I do have a circle in my button to play now.
Can you enlighten me a bit. Does this mean that En has accepted the PSD, or something else.
If something else, I would also look closely at the Layers in the PSD. While I do not recall very small Layers creating an issue in En, they have been known to do so in PrPro. This is often something like a very small logo, on a Layer by itself, with nothing but transparency around it. In PrPro, a message, similar to yours is offered up, but that is in Import, and you got it only with the Build.
Too bad that the Check Project function is not a full pre-flight test of all Assets, like in InDesign, but it falls short, as it only checks for DVD-compliance in the navigation. I've filed Feature Request for more, but since En is built on the Sonic AuthorCore modules, I suppose that it's not as easy, as I would have hoped for.
Good luck, and help me understand the above,
Hunt

MiniTOC does not appear in translated source file

RoboHelp 8.0.2
WebHelp Output
I added a miniTOC placeholder to three of my topics. This is the first time I am using the placeholder.
The English WebHelp project was sent for translation to French Canadian. I received the source project and noticed that the placeholder does not appear in the source file. Therefore, when I compile the output the miniTOC does not appear.
The translation company is using the latest version of RoboHelp, but I am not sure what tool they use to translate.
I have no clue how to resolve this issue. Sample code and screens are listed below.
Donna
English Source
<h1><a name="Top"></a>Working with Web Ordering</h1>
<p>This topic explains how to generate and maintain NAPA and Factory orders.
(Special orders and Non NAPA orders will be available in a future release).
You perform these tasks on the <span style="font-weight: bold;">Order
Maintenance</span> page. This topic assumes you have launched <span style="font-weight: bold;">Order
Maintenance</span> from the TAMS II Landing Page or selected <span style="font-weight: bold;">Inventory
> Web Ordering</span> from TAMS II BackOffice.</p>
<p>See: <span style="font-weight: bold;">TAMS II Web Interface Overview
</span><span>topic</span> for instructions on common functionality such
as sorting data.</p>
<?rh-placeholder type="minitoc" ph-style="font-family:Arial;font-size:10pt;font-weight: bold;font-style: normal;text-decoration: none;"
list-type="ul" list-style="circle" caption="Topic Contents" caption-style="font-family:Arial;font-size:11pt;font-weight: bold;font-style: normal;text-decoration: underline;"
margin=";;0px;1px" min-heading-level="h2" max-heading-level="h2" flags="7" ?>
<p> </p>
<h2>Adding a New Order</h2>
<p>Follow these instructions to create a new purchase order:</p>
French Source
h1><a name="Top"></a>Utiliser le module de commande en ligne</h1>
<p>Cette rubrique explique comment créer et gérer des commandes NAPA et
d'envoi direct. (Les commandes spéciales seront disponibles dans une version
future.) Ces tâches sont effectuées à partir de l'écran <span style="font-weight: bold;">Gestion
des commandes</span>. Cette rubrique suppose que l'utilisateur est connecté
et que la <span style="font-weight: bold;">Gestion des commandes</span>
a été lancée à partir de la page de renvoi de TAMS II. </p>
<p>Voir : La rubrique <span style="font-weight: bold;">Survol de l'interface
Web de TAMS II</span> pour des instructions sur les fonctions courantes
comme le tri des données.</p>
<h2>Ajouter une nouvelle commande</h2>
<p>Suivre les instructions ci-dessous pour créer un nouveau bon de commande :</p>

The Shuffle can only be linked to one computer at a time if you want to use the Shuffle on a different computer you must allow Itunes to restore the Shuffle and than you can use it. Sorry there's really no good way around this besides going third party.

New group in Shared Services does not come up in projects?

Hi All,
I'm working on a system that has externalized security, and we use Hyperion Shared Services to add users to groups and assign filters to groups.
I have just added a new group in the analkytic server in shared services, I have also provisioned it to have filter access of a particular DB.
When I go to the projects folder and check the list of groups under the application, to look for this group so I could assign the filter, I dont find the group listed.
Does anyone know what I am missing out on.
Thanks in advance.
Anindyo

Hi John,
I tried to delete the group and create a new group again:
searched for the group, right clicked on it and clicked on Provision.
Then I expanded the Analytic server tree to the left, selected server Access, and moved it using the arrow button.
Then I expanded the DB name, there were "Provisioning Manager", "Application Manager" and "My Role".
I expanded the Tree of "My Role" and found "Calc", "Filter" and "Read".
I expanded the tree "Filter", and found Start/Stop Application.
I selected "Filter" (not Start/Stop Application) and moved it to the second list on the right using the Arrow button.
Then I clicked on the save button.
Now I expanded the Projects Folder:
Clicked on the DB to which I provisioned this group.
It showed the list of users and groups to the right.
I selected groups in the drop down.
Clicked on refresh, but the new group does not appear.
Please let me know if I missed out on anything.
Thanks for the response,
Regard,
Anindyo

"This file does not appear to be a Photoshop file"

Ok, I used the first edition of Encore in the past, but I just installed the version that came with Premiere CS3. I used Photoshop 6.0 to do my menus in the past, but just installed the trial of Photoshop CS3.
Two things:
My old menus I created in Photoshop 6.0 won't import into the new Encore.
The new menus (I opened my old menus with CS3 and saved them out.) won't import into Encore either. In both cases, Encore says:
"This file does not appear to be a photoshop file."
The files are indeed all photoshop .PSD files and the Photoshop 6.0 files are actually menu files that were in the same .ncor project I used on the old Encore and opened on the new one.
Why won't Encore read these?
Thanks!

Bummer,
I hoped that I had helped.
Let's play 20 Questions:
The PSD files were originally created in PS 6, and you have Opened them in PS-CS3, from which they were Saved. Correct?
Did CS3 throw any error messages?
You state that they were Menus in Encore. Which version, and did they function perfectly there?
I assume that when used in a previous ver. of Encore, they did function, but now you have Opened, worked on and Saved from PS-CS3. What changes were made?
Was the Color Mode, or Bit-Depth changed, or were Alpha Channels introduced?
Has your OS been changed?
Will these files still Open fine in PS-CS3?
I'm trying to find the point that they ceased to Import, as they should and find out what might have changed with them. You might want to do a bit of a timeline on the life of these files, i.e. 1.) created in PS6. 2.) used as Menus in Encore2. 3.) Opened and changed in PS-CS3 by doing X. 4.) Saved out as PSDs and attempted to Import into Encore CS3 with above error message...
Something has to have changed, and the task is to find out what that is/was.
Hunt

This file does not appear to be a Photoshop file - Menu won't import

I was searching on the forums and found that some other people have had this problem, but I didn't see any solutions.
When I try to build my DVD from Encore, I get this error "This fiel does not appear to be a Photoshop file.
I created my menu in Photoshop CS4, imported it as a menu. When I preview in Encore it works fine?
The photoshop file is 8 bit color...should it be 16? I tried that to, but it doesn't seem to change anything?
Any help is greatly appreciated!!!

The 2 bit image object that shows up to the right of the buttons on the highlighted state still was a little too crisp, but
I'm going to try a little vertical blur like you said to see what happens.
Well, the Vertical Blur will not work there. The Sub-picture Highlights cannot have any Styles, or Filters added to them. What I do to "simulate" a "glow" is to to create a second Sub-picture Highligh, in the next Layer down (in the same Button Layer Set)t, ever so slightly larger. I then set it's Transparency in Encore to be about 50%-30% of what the "original" Sub-picture Highlight's Transparency was. You can also assign another number from the Menu Color Set (this is done in PS), and then adjust that number's value in Encore to be a shade lighter of the original Sub-picture Highlight's. You will end up with maybe a 2 and a 3, and need to pick those colors from a Custom Color Set in Encore - cannot be done in PS, at least through CS3 and I do not believe in CS4 either. That might bear checking out, with someone like Jeff Bellune, or Jbowden. See this LINK for some tips, and this one for the full ARTICLE. The link to the version posted on Adobe has been lost, with the changeover in the forum. You can post and read at Muvipix.com, without a subscription, or even the free signup. Because of the wealth of Functional Content, stock music and Menus, etc., you might want to spend a bit of time poking around there.
Though most of the article and discussion revolve around removing part of the Sub-picture Highlight, the final steps are for adding what appears to be a Blur. Remember, you only have ON, OFF, COLOR (limited to 4, including the background) and TRANSPARENCY, for each pixel in a Sub-picture Highlight. That's why you cannot have Styles, or similar. You have to create the illusion.
Also, I created my lower third in Photoshop and saved out a .PNG file to import into Premiere.
When I play the DVD, there seems to be some noise in the title. Do you think that's because of how
I saved the video out or because I used a .PNG?
I do not know. I have never used the PNG format. Instead, I create all of my Titles (the ones that I do outside of Titler) in PS, often using AI for shapes, that will be Rasterized in the process. I do my Titles there, and then Save_As .PSD. If I wish to animate some of the Layers, I'll Import as a Sequence, if not, I Import as Footage. I always start from the image Preset to match my Project, so frame size and PAR are right to begin with. The only reason that I can think of for using PNG is the Transparency, but PSD offers that, and so much more.
There is much that one can do with the animation of PSD Layers in PrPro. It's not as powerful, or as full-featured, as is AE, but many are surprised at how good it is.
Best news is that you are almost there, and that things looked good on the DVD. If you have any trouble following the steps for the simulated Glow in the second Sub-picture Highlight, just let me know. It's been a whle, since I wrote that, and might need to re-visit it myself.
Good luck,
Hunt

Web-object interaction/widget does not appear in published slideshow

I added the web-object interaction/widget using my notes from the instructions in the relevant Lynda.com video (as the Captivate 7 User Guide makes no mention of the web page widget, web-object widget, web object widget, web-object interaction, web-page interaction, web page interaction, or webpage interaction).
The web-object interaction, or web-object widget (or whatever you choose to call the thingie that should provide the user of the published project slideshow with direct interaction with a web page from within one of the slides), it sometimes works in preview; may have worked once when published; but otherwise does not appear on the slide.
On its not appearing in either the published HTML document or the SWF file:
--I had a Continue button on the slide, and tried removing that.
This did not help.
--Because the web-object interaction/widget automatically sets the slide's action on entrance to "Pause," I tried setting it to "No action" (thinking that the slide, being pause on entrance, might never get to the web-object widget/interaction).
This did not help.
--I thought that perhaps navigating in the slide show with various "Jump to slide" settings, I would watch it without navigation.
This did not help.
Any help will be appreciated.
Jeff

In the published folder, I noticed a SWF called stagewebview. I guess this file has got something to do with Web Object interaction. When we link to published HTML file, this SWF is getting called automatically. But in your case since you are linking to published SWF file, the web object interaction SWF is not getting called. So, is it not possible for you to link it to HTM file?
Sreekanth

Glossary does not appear in merged project

Similar Messages

Maybe you are looking for