Glossary of components used in SNC

Hi,
I am new to SNC and to understand it better I need the Glossary of various components used in SNC.
For eg
Transportation Lane:
A transportation lane connects the ship-from location with the customer location. You must assign the product that the supplier delivers to the customer to the transportation lane. You also assign at least one means of transport to the transportation lane. SAP SNC uses the transportation duration of the means of transport that is assigned to the transportation lane for scheduling the delivery date from the shipping date and vice versa. Means of transport are also relevant for special applications like Transport
Like I mentioned above it is required for all components used in SNC
Thanks

You will get the data in COOIS sap std report
in which you choose
List = component list
Or list = object list and in the object list tab page choose component check box.
execute the report with order numner..
you will get all the components.

Similar Messages

What are the ODM components available in SNC?

Hi experts,
Could you please explain on
1. what are the ODM components available with SNC an their use?
2. Settings that required to activate/generate/regenerate ODM?
Thanks in advance and eagerly looking for your great words.
Regards
Vinoth

Hi Rohan
The following are the order components available with SNC
1HDR,1KNB,1NOT,1PAC,1PRA,1PRC,1PRT,1SCN 1SUB 1PRT 1SCN 1SUB 1TST 2IT2 2IT3 2NOT 2PRA 4NOT 4SDL 4TST 7MP1 7MP2 7MP3 7REF 7RQT BWHG BWIG BWLG DLH1 DLI1 DLI2 DLI3 DLI4 DLI5 DLI6 DLI8 DRIT DRSL FTD1 FTDH FTU1 FTUH HEXC HHU1 HHU2 HHU3 HHU4 HMSG HPRT HSTT HTRA ICAR IEXC IPRD ISTO ISTT IVH1 IVI1 IVI2 KNBR OECN OECP OEHD OEIL OEIR
OEIT OESL PIHD PIND PIOR RWAA RWAT RWCG RWCP RWDS RWFA RWGN RWHN RWIB RWIN RWIR RWIV RWLC RWNS RWOH RWOI RWOP RWP1 RWP2 RWPA RWPG RWPH RWPN RWPP RWPR RWPV RWPW RWRC RWRS RWSN RWTS SCNR
TLBH
Depending on the data you exchange between the two systems, you need to activate the necessary components.
These components form the basic framework where the data in your order document gets stored in the respective components
For example:A double-level order document, use the components 1HDR (header) and 2IT2 (item). For a triple-level order document, use 1HDR (header), 2IT3 (item) and 4SDL (schedule line).
As mentioned by Nikhil and Sandeep, the above notes help you, in activating the necessary ODM's
Kindly read the help document available is SAP IMG for further understanding.
Best Regards
Vinod

What are the UI components used in oracle adf?

what are the UI components used in oracle adf?

Web.:
- ADF Faces and Trinidad JSF components
http://docs.oracle.com/cd/E28280_01/apirefs.1111/e12419/toc.htm
Desktop:
- MS Excel
http://www.oracle.com/technetwork/developer-tools/adf/overview/index-085534.html
Mobile
- AMX UI Components for Android and iOS
Frank

Errors Installing Portal Components using 9iAS Enterprise on 8.1.7 SE

We are getting an error installing the Portal Components using
9iAS Enterprise on a 8.1.7 SE database. The log indicates that
the error is:
ORA-00439: feature not enabled: Function-based indexes
Errors encountered in the Install process. Installation Aborted.
While I know that Function-based indexes are not supported in SE
this should not prevent the installation of Portal.
Does anyone have any suggestions?
Thx, Paul

Its also working in our case where we have used 8.1.7 Enterprise Edition. We installed 9iAS 1.0.2.0 on NT. So if you have any issues regarding this then let me know.

How to avoid extra div tags, when we add components using cq:include

I tried using the below code in my component jsp from forums to remove those extra div tags when we try to add components using <cq:include tags.
<%
   if (WCMMode.fromRequest(request) != WCMMode.EDIT && WCMMode.fromRequest(request) != WCMMode.DESIGN) {
       IncludeOptions.getOptions(request, true).forceSameContext(Boolean.TRUE);
%>
But this code helped to remove most of the extra div tags , but still adds this extra div tag to the first component I add using <cq:include tag.
its a basic and very critical necessity to maintain our markup design,But due to this dynamically added extra div tag will hinder the html and css behaviour of the page.
Appreciate your help to resolve this issue.
Thanks

Hi,
Can you try below if you really dont want to include anything during include.
<%
IncludeOptions opts=null;
   if (WCMMode.fromRequest(request) != WCMMode.EDIT && WCMMode.fromRequest(request) != WCMMode.DESIGN) {
opts= IncludeOptions.getOptions(request, true);
opts.forceSameContext(Boolean.TRUE);
opts.setDecorationTagName("");
%>
Thanks,
Pawan

What are the components use to be store in workspace repository ?

Hi ,
We are working on Hyperion System9 v 9.3.1 which is on AIX server with Oracle 10g repository. We have scheduled approx 300 bqys having email notification which is importing bqy output files to respective folders with joboutput in another folder.
As, we know that all bqys & jobs use to be store in file system on Hyperion server (/Hyperion/BIPlus/data/RM1_servername/root/../...).
But our concern is hyperion repository size which is 163 GB in current scenario.
Therefore, we need to know that what are the components use to be store in repository for Hyperion workspace.
Your any guidance will be highly appreciable.
With regards,
Ashish Sinha

Hi,
In the company they want that the employee can display the catalog.
In the system ECC SAP menu -->Human Resources -->Training and Event Management --> PV01
Also they want display the Availability of the room for a course.
This can do in E-Learning? or the solution is using ITS?
Kind Regards
sanew2

Skinning Components using Flash assets?

I'm trying to learn how to skin components using assets that I designed and laid out in Flash. I was quite comfortable with the Flex 3 / MX method of skinning but I'm now trying to push myself into the new Flash Builder / Spark way of doing things. I'm lacking info on the best way to go about things though.
Most tutorials I see are based on Illustrator or Photoshop design integration. I've tried to use Flash Catalyst but it seems that I can't utilize specific assets built within Catalyst and inject them into my existing Flash Builder application (unless I'm wrong?).
Ultimately, what I'd like to be able to do is to design my elements in Flash, import it into Flash Catalyst, set up specific buttons and components and then import them into Flash Builder as individual SparkSkin elements and then assign those elements to components within my application. I don't want to use Flash Catalyst to build and lay out the entire project. I just want it for building out individual components. I'd rather lay out the Flash Builder project on my own.
So here are my questions...
Is it possible to set up individual components within Flash Catalyst and import them into Flash Builder as SparkSkins? If so, how?
How can I design an asset within Flash (for example, a big graphic that is a background element) and then apply it as a SparkSkin?
How can I keep the Slice 9 properties of an element that I designed in Flash?
If I'm just not "getting it" feel free to let me know!
Any tutorials or resources would be greatly appreciated!

I got the a 'round-about' answer that I was looking for in this link: http://help.adobe.com/en_US/flashbuilder/using/WS6f97d7caa66ef6eb1e63e3d11b6c4d0d21-7fc7.h tml
Scroll down to the "Creating and Editing Flash Components".

Look for: components used for Service Brokerage (CSB) for mobile networks

I am looking for developers/company offering components used for Central Service Brokerage (CSB) for mobile networks. It aims to store consumer profiles and directs service requests (shopping, travel & meeting services, hospitality and insurance) from mobile consumers to connected retailers and appointed service providers.
I would be higly interested in almost ready to use components/architecture which can be used in new service/start-up situation.

Hey Anthony,
Yes, a lot to read, thanks for reading though!
For the External Web Services, since I have it set to fe-pool.domain.local right now, I figure this is as simple as flipping it to fe-pool.domain.com within Topology Builder | Enterprise Edition Front End Pools | Edit properties | Web services?
After which, I assume I will need to create a new host A record for fe-pool.domain.com, pointing to the Pub IP 1.2.3.4 I have set up to forward directly onto my FE Server of 18.20? I am a bit of confused as to how this external web service is contacted,
does the mobile app use lyncdiscover.domain.com to find this information? In other words, does the lyncdiscover allow the mobile app to get inside the topology, the topology reports to the mobile app that "Hey, fe-pool.domain.com is going to be your External
web service as defined in the topology" ? If its just that easy this should be a quick change.
As for your next question, on the F5 level I'm pretty certain it is just set to take any packets coming in from pub IP 1.2.3.4 : 80 or 8080, or 443, or 4443, to allow it to go to that FE server IP on any of those ports. I don't believe it is actually taking
a 443 packet, and converting it into a 4443 destination. Also note, I am forcing lyncdiscover to use port 80, instead of 443 because I am unable to get a new pub cert with the lyncdiscover SAN.
As for the domain user, it is simply just my single user and I am flipping the SIP domain in the control panel within the user properties. domain.com and domain.local are both configured SIP domains in my topology, however i have domain.com as the default.

Can I have the standard JSF Components use my RenderKit

I am new to JSF.
I had a problem on an applicaiton server where the app server's ResponseWriter implementation was breaking my JSF App. My JSF App uses both the standard as well as our custom JSF components. The solution found was using our custom HTMLResponseWriter, which was plugged in in a sort of hack solution for time being. Now I want to make a new custom RenderKit which will use this ResoponseWriter . What I want to do is this :
i) The RenderKit will obvoiously be pluggable. The standard JSF components will be using the JSF Implementation default render kit. But with a simple entry of my RenderKit in faces-config.xml, I will have my custom components as well as the standard JSF components use my renderkit.
ii) The only purpose of having my RenderKit is using the custom ResponseWriter . Is this the right approach ? If not please suggest.
regards
Vishwanath

Hi,
1. Pls check whether you have users assigned for the org unit which you are assigning for PR configuration.
2. You should copy the std workflow and do the modification, and not modify the std workflow itself.
Hope this helps.
Regds,
Akshay Bhagwat

Call COM Components using JNI

Hi,
Can we call COM Components using JNI? If yes can someone pls guide me how to go about it
Thanks
Guriqbal

JNIWrapper 2.0 Beta with Java-COM integration is already available for download and evaluation. Check the http://www.jniwrapper.com/news.jsp
Hope this helps.
EToporov

Automatically Expose UI Components Using an Existing Managed Bean

I am trying to use the "Automatically Expose UI Components Using an Existing Managed Bean" in the Page Implementation" section when creating my jspx page but cannot figure out how to get the radio button enabled in order to use it.

Can you further describe for me? Here is my use case.
I have a page where I enter parameters that are sent to the session bean that calls the entity and returns a list.
This list is what I need to display on the next page.
I don't understand how to get the information from one page to the next. I did set the managed-bean-scope in the faces config to session.

Installing components using auto-generated plans from Jython CLI

Hi All,
for specific reasons, we want to install a set of components with fixed signatures from Jython CLI, but without appropriate plans. In fact, we want to simulate the behavior that we know from Plugin UI, i.e. linking directly to an installer of a component.
We figured the following steps are necessary within CLI code:
1) For the targeted component generate an appropriate install plan using 'pdb.p.genplan' command. This unfortunately does not create the plan within the system, but rather has to be redirected to a file.
2) Import the previously generated plan using 'pdb.p.ci' command from this file.
3) run the plan using fixed signature to install component
4) eventually remove the plan.
Now, the problem is, that step 1) generates a plan targeted for the folder '/system/autogen', but step 2) fails on importing the plan there, because the folder is owned by the system plugin. So we would end up parsing the XML file, replacing path and so on .... We definately don't want to reinvent the wheel, here.
Any help appreciated!!!
Regards,
Frank

First of all, thanks for the super-fast reply.
We got around with parsing using the xml.dom.minidom package in Python. Three more lines and poorer performance, but nothing you can measure against the CLI performance itself ;-)
I like the idea of using a template plan, as you suggested, because the generated ones bear another problem: We have to pipe in the plan parameters, which we don't know for sure, except for one, that is the 'markOnly' flag. So this might get us around piping in stupid dummy params.
How exactly do you wait for the plan completion? We use 'pe.p.lo', but don't know how to figure out, if it was successful or not, at all. No return code this time, and stdout isn't filled in markOnly=true mode.
Regards,
Frank

List of Components used in Production Order

Hi ,
I want to report in which I want to pull out all the componets in the production order.I dont want explode the BOM for the day as many components might have been manually added in the productio order and it may not be present in BOM. is there any table or Function module which I can use for the same.
Thanks ,
Tausif.

You will get the data in COOIS sap std report
in which you choose
List = component list
Or list = object list and in the object list tab page choose component check box.
execute the report with order numner..
you will get all the components.

Programatic Generation and positioning of components using Drag and Drop

Hi,
I am relatively new to ADF and UI Designing. Im trying to generate a flowchart using drag and drop feature in ADF. This involves creation of dragging images such as start,decision .. etc from one panel to another and dynamically creating a flowchart.
Up to now i have managed to drag images from panel1 to panel2 and create them dynamically in the bean class. However im stuck at this point .. Im not able to position the draggable components on the desired position in the panelGroup. They either appear horizontally or vertically.
Is there any way to achieve this. Also is it possible to assign a dropTarget to a a target component which is created dynamically ?
Thanks in anticipation ....
Lyle

Hi Lyle,
I am too only 4 months old to adf ,i use jdeveloper 10g.
In 10g for the components to be placed at desired locations i think is somewhat possible. While you can arrange them by using spaces which causes
f:verbatim tag to appear or you can use ADF Faces Core items like Object Spacer and Object Seperator where you can set their length and width to space objects on page...
Regards
Rohit

External e-mail id used in snc

Hi Team,
How do we have external e-mail idu2019s used in SAP SNC.
e.g. in case the downloaded PO Confirmation file is to be sent to Vendors Gmail id or vice versa.
Thanks,
Sanjay

Hi Sanjay,
Follow the below steps:
1)Login as a Supplier and go to Tools --> File transfer --> download center and click on create
2) Enter Customer BP=<customer_BP> then click on next
3) Select Purchase due list then click on next
4) click on next
5)Select peridicity of the job as per your need and click on next
6)Enter profile name,delivery type of download file as email attachment and enter external email ID(supplier email id or person who wants this file as email) check the immediate file generation check box then click on finish.
Ensure that basis setting is done such that external email can be sent otherwise system will not sent email to external email id.
You can check email is sent or not goto transaction code:SOST and check the same.
Regards,
Nikhil

Glossary of components used in SNC

Similar Messages

Maybe you are looking for