"Glossary Secondary Definition" does not hold italic custom styling

I restyled the "Glossary Secondary Definition" character style sheet as italic. When I close iBA (saving or not saving does not matter), then reopen the file, the Glossary Secondary Definition reverts back to roman. I am able to change the color and font and that holds but the italic doesn't. I'm using Times New Roman. Any ideas?

Wil it hold with Helvetica when tested on iPad?
Can you replicate the issue in a new test book?

Similar Messages

Secondary monitor does not work after OS X install

My secondary monitor does not work well after OS X install. The image on my secondary monitor is different even the screen svaer image is different and the mouse can not be seen.

Try the easy thing first - NVRAM reset:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
If that does not work, post back with more info, including the version of Mac OS you are running. How is the external monitor connected, did it ever work, and from what OS X to what was the "OS X install" in your title?

I_vnam does not hold value after i_step is 1

Hi all!
I have a characteristic 0calday. For my report, i have a customer exit which has the following requirement:
If only one value is entered for 0calday, I have to populate this value as 'From' value for 0calday and system date should be in the 'To' value of 0calday so as get data for the range value entered and current date.
I tried using the following code:
CASE i_vnam.
WHEN 'ZC_CADAT'.
CASE i_step.
   WHEN 3.
     READ TABLE I_T_VAR_RANGE INTO L_S_VARIABLE_RANGE INDEX 2.
       IF SY-SUBRC = 0.
         IF L_S_VARIABLE_RANGE-LOW IS NOT INITIAL
         AND L_S_VARIABLE_RANGE-HIGH IS INITIAL.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'BT'.
            L_S_RANGE-LOW = L_S_VARIABLE_RANGE-LOW.
            l_s_range-high = SY-DATUM.
            APPEND l_s_range TO e_t_range.
         ENDIF.
       ENDIF.
ENDCASE.
ENDCASE.
When I was debugging this is what i found:
I_VNAM holds ZC_CADAT initially untill i_step =1.
the variable screen appears and I 've entered only one value for variable ZC_CADAT.
Execution was fine till here. after my input,
Ideally, I_VNAM should hold the value ZC_CADAT, and I_STEP should be 2.
But both of them are not working. Both I_Vnam does not hold ZC_CADAT and I_Step is now 3.
Please help me. I am unable to work this out.
Points will be awarded!!!
Thanks,
Sri

Hi,
I was using a different customer exit variable to capture the input and pass that value to other CE variable with i_step = 2.
This solved it.
If this was not ur case, let me know the problem background
Thanks
Sri

Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040

Please assist I am on a Windows 7 64 bit machine I have VS 2010 and have been fighting with this new program that I was brought on to help with - Issue is that I am unable to get rid of this issue. There is so many solutions but none have worked. If someone can give me some help with what has worked for you.
The error is Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
This is with CR installed on 64 bit.
Thank you very much for any assistance with this problem,
Kris

Hi Vittorio
Please enter the search string 'log4net crystal net' into the search box in the top right corner. When the results come up, click on the Support Notes link. That will filter for the KBAs that you want to have a look at.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Battery shows charging but stuck on 28% and does not hold charge

i am using HP DV6-6107tx, i got a new extended battery from anker which seemed to be running fine untill it discharged while i was playing watch dogs.
now my laptop wouldn't power on just on the battery, everything works fine if it is on charging, but the battery does not hold charge and my system powers off immediately on removing AC adapter. the battery shows "28% Charging" but does not increase or decrease the percentage even after hours of charging both while system is on and off.
i checked the battery in battery test from HP Support Assistant and it says that the battery status is ok, now i have tried the below methods with no luck :
power off and press power button methods.
uninstall and reinstall battery from device manager methods.
battery check from HP Assistant.
updating Bios to F.1b method.
updating the HP Support Assistant.
and all the other methods i could think of or read on HP's site.
can anyone guide me as to what is the issue here ? i don't have another machine to test my battery on, the charging lights are fine except that the light does not change color which it did on full charging the battery. i did try on 2 different adapters.
now if it were a motherboard or IC issue, would it not have said 'not charging' in windows ? in my case it says charging.
any help would be greatly appreciated.

Hello, M_Bilal
Welcome to the HP Forums.
That you for provided such a detailed post with what you've already completed, for the issue with your battery. I will try to guide you further.
I would like to provide you further documents for troubleshooting, but you've essentially completed what I have for this issue. The only step left, would be to test the battery.
You can do this with another battery, or in another notebook. I know you mention another machine, but if you know someone who does or someone who has a compatible battery. This would test that. You could even see if a local computer shop could test it.
The reason for this, is if the battery is the problem, it's much easier and more affordable replacement. Also, you mention it being new, might have warranty.
The other possible cause to the issue you've touched on, that would be the system board. Testing the above, would just confirm if this is the problem or not. From there you could decide on what you'd like to do.
I know, there really aren't many suggestions here, but I hope this can provide you with the next step.
Let me know how things go, with the route you choose to troubleshoot.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
===========================================================
This is a SQL Server 2012 Developer Edition of SSRS.
I am getting this error when navigating to http://servername/Reports. The reports site was working fine, until I installed a SQL 2014 Developer instance (including SSRS) on the same server.
I can still get to the http://servername/ReportServer site.
Neither of these are using Sharepoint.
Any help resolving this issue would be greatly appreciated.
Below is the stack trace.
===========================================================
[FileLoadException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Reflection.Assembly._nLoad(AssemblyName
fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
StackCrawlMark& stackMark, Boolean forIntrospection) +416 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166 System.Reflection.Assembly.Load(String
assemblyString) +35 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190 [ConfigurationErrorsException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel'
or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +1149
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +323 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +116 System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +36 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection
compConfig) +212 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +174 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +57 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath
virtualPath) +295 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +482 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext
context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +108 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean
noAssert) +171 System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +52 System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext
context, String requestType, VirtualPath virtualPath, String physicalPath) +53 System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) +519 System.Web.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+176 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +274
===========================================================

Hi Glen，
"The located assembly's manifest definition does not match the assembly reference." is generally caused by the loaded assembly's version is different than the expected version application refers to.
In this case, it should be caused by:
While starting Report Manager, the backend process ReportingServiceService need to load assemblies it refers to
ReportingServiceService reads the compilation/assemblies element from web.config(under Report Manager virtual patch)
If the compilation/assemblies is not existing, ReportingServiceService loads all assemblies from Bin folder. It can be verified from call stack System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory(). ReportingServiceService
uses System.Reflection.Assembly.Load with the assemblies' name only to load assemblies.
The Assembly.Load tries to load from the specify assembly by name from GAC at first. If it is found from GAC, it won't be loaded from Bin folder any more.
Since Reporting Service SharePoint Integration mode is installed, a same assembly of 'Microsoft.ReportingServices.SharePoint.ObjectModel' with different version might be installed to the GAC. That causes the error "The located assembly's manifest definition
does not match the assembly reference."
For more information about the error message and the loading process, please see:
http://blogs.msdn.com/b/junfeng/archive/2004/03/25/95826.aspx
https://msdn.microsoft.com/en-us/library/yx7xezcf(v=vs.100).aspx
Thanks,
Jinchun Chen

My batterie doesn't work correctly to my Iphone 5. It should work longer, but it's worse. My battery does not hold a full day without much use.

It should work longer, but it's worse. My battery does not hold a full day without much use.
When the new version of ISO6 will come ??? A lot of apps don't work correctly too.... :-(
I'm a little bit disappointed...

Sounds like your iPhone is locked to your home carrier.
See if they offer unlocking and if you qualify. Otherwise,
there is nothing you can do besides rent/but a cheap
phone for your month in Argentina.

MY new Ipod Nano does not hold a charge. I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time. I drains to the red line in less than 2 days. My husband's nano will last a week this way.

MY new Ipod Nano does not hold a charge. I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time. I drains to the red line in less than 2 days. My husband's nano will last a week this way. I thought it drained because of looking at photos, so I quit looking at them and it made no difference. Am I doing something incorrectly to cause this short battery life?

You are still under warranty if your iPod is "new." Take full advantage of it by either calling iPod tech support, Apple Care if you have it or take it in to an Apple store or an AASP. Whichever is more convenient for you.

My new Iphone's battery does not hold charge for long; do you have the same problem?

Greetings, I had a new iphone 4S - bought March 2013, died suddenly September 2013. Iphone replaced by a new one, which seemed to work fine. Suddenly, noticed three days ago that the battery does not hold, even for one day, even with very little use. Charged battery yesterday morning, as it was dead, used phone a few times during the day, still had half batery full at bed time; this morning there was no battery at all - had discharged completely overnight doing nothing. Has anyone had this problem?
It means that I will have to travel a long way to the nearest store to have it looked at. Had already done this last September to replace a dead phone. One would have expected better quality and reliability from a Company like Apple.

Sounds like the battery needs replacing. Bring the phone to Apple for battery diagnostics.

"Always open in column view" does not hold

"Always open in column view" does not hold the preference when applied to my hard drive.
I select Macintosh HD and choose the column view. I go to View > Open View Options and check "Always open in column view". Then if I click on a different folder and go back to Macintosh HD, column view is retained... that is until I restart the computer.
After a restart, when I click on Macintosh HD I am back to icon view. Again I go to View > Open View Options, and somehow the preference has changed to "Always open in icon view". If I switch back to column view, the preference is retained again until I restart, then it's back to icon view.
Other folder and external drives open in column view after a restart, it is just Macintosh HD that always reverts to icon view.
Sent a bug report to Apple, but any ideas how to fix this?
Message was edited by: Bazzography

V.K. wrote:
install ONYX and use it to delete all .DS_Store files on your drive. every folder has one and they store the folder view settings. you seem to have some corrupt ones. also reset your finder preferences. delete the file homedirectory/library/preferences/com.apple.finder.plist. then control-option-click on finder in the dock and choose "relaunch".
try setting default views after that.
Did both suggestions and it appears to be working as expected now. Many thanks for the quick (and very useful) reply VK!

Error : Workflow definition does not exits(T-code : SWU7 )

Hi All,
I checked my workflow template in SWU7 .Its gives me error "Workflow definition does not exits".
In the bottom left of screen it displays message : "Container Element ZBUS2081 is not used".
How can remove this error ? Please help..

Hi ,
The method used is standarad "GETEMAILDATA".
no changes have been done to this.
In bindings(exist)
Workflow Step 'Get data from Email'
&INCOMINGINVOICE.PAYMENTBLOCK& &PAYMENTBLOCK&
Then in Containers tab{ other tabs include basic data,description,triggering events,terminating events,defualt values,sapphone)
this expression have been defined :
abap dict. refernce : RBKP-ZLSPR
PROPERTIES : IMPORT,EXPORT and MANDATORY.
The BO name is ZBUS2081
For BOR ZBUS2081
bus2081.PaymentBlock datatype refernce : RBKP-ZLSPR
method defined :bus2081.BlockedPriceCheck
Kindly check if fine.
Edited by: ujjwal dharmak on Nov 22, 2010 9:14 PM

IPad does not hold a charge. Anyone know why?

My ipad does not hold a charge. I charged it yesterday and didnt use it at all today plus I even shut it down all the way not just sleep.

I doubt that anyone here, with the limited knowledge of how you actually use your device, could ever do more than hazard a guess. Your power adapter is bad and not charging properly .... It is possible that the battery indicator is giving you an incorrect reading and that the iPad has more battery power left than it shows on the meter, but if it shuts down on its own after less than say - 6 hours - on a full charge - then something is wrong.
About the iPad Battery
http://www.apple.com/batteries/ipad.html
Charging the Battery
http://support.apple.com/kb/HT4060
You may want to read both articles and make your own determination. You can always try restoring the device and see if that helps. Read this for help.
http://support.apple.com/kb/ht1414
or this
http://www.ipadtomactransfer.org/ipad-tips/how-to-restore-ipad.html
You could try a hard reset and see if that helps at all.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Skin for an x220 - Fathead does not have a custom skin

I bought a skin when I ordered my x220, but I now see that fathead does not have a custom skin for this model. Is there another Thinkpad with the same dimensions. Any thoughts on what to do?

The Fathead website now has the X220 up ..
But does anyone have any experience with these stickers? Do they fit the x220 well, with regard to the Lenovo/Thinkpad bezels? Thanks for any feedback on this.

[BUG] Adobe Bridge does not support OSX 10.10's "Go Back" keyboard shortcut and does not have a custom one.

Adobe Bridge does not support OSX 10.10's "Go Back" keyboard shortcut which is `command + shift + [` and does not have a custom one.
I tried "delete" key which is backspace for Windows. It will do delete identical to "delete X" key (which is delete key for Windows).
Sidenote: `command + shift + \` is to go back in views (switch views), not folder structure.

Exactly where do you want to use a GO BACK "shortcut" in Bridge? Maybe I don't even understand what you mean by Go Back. Bridge is only a file browser, nothing more. It doesn't open, edit, manipulate or save files at all.
Are you simply referring to going back to view a folder that you viewed before?
Please don't take this a criticism. As someone who will gladly pay money not to have to learn any shortcuts at all, I'm just puzzled and curious, that's all.

"Glossary Secondary Definition" does not hold italic custom styling

Similar Messages

Maybe you are looking for