Glossary Tab and Navigation Controls

Hi
Our company has been asked to test our application using a
Japanese version of Windows. Neither the program nor the help will
be translated. Our QA department found two help-related problems:
1. The TOC, Index, and Search tabs appear in Japanese, but
the Glossary tab does not.
2. The Navigation Control I inserted for the Related Topics
appears as a square with a dot in the middle as if it were a
missing image, and nothing happens when you click it.
I'd appreciate any help you can offer to either show the
Glossary tab in Japanese, or the other three in English, and to get
my Related Topics popup back.
I use RoboHelp 7.02 HTML and generate CHM files.
Thanks,
Jennifer

Hi there
Likely you need the 64 bit version of the HHActiveX.dll. I believe this is only available in RoboHelp HTML version 9.
If you have version 9 I received this from a Question I asked of Adobe:
...you can get the 64 bit version of HHActiveX.dll in RoboHelp 9.0. It is kept at "<RoboHelp 9.0 install folder>\Redist\x64\HHActiveX.dll"
If RoboHelp 9.0 is installed on your machine, this activeX control is already registered. Otherwise you need to register this DLL.
To register HHActiveX.dll,
1> Run Command prompt(cmd.exe) as administrator
2> Type "regsvr32 <HHActiveX.dll full path>" and press Enter.
3> This should show that the registration is done successfully.
Now working with 64 bit version of HH.exe should also show Glossary and Browse Sequences.
You might download version 9 and test.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Similar Messages

Why do the glossary tab and browse sequences of my CHM not show up outside of Robohelp?

Hi,
I have Robohelp 8.02.208 running on a 64-bit Windows 7 machine. It has only been a few weeks since I moved from XP, but I don't know if this is connected to my issue of having a grayed out glossary tab and no browse sequences listed in my generated CHM.
I had encountered a very simialr issue a couple or year ago, and thus I have verified in the registry that HHActiveX.dll is registered and properly located on my machine. All seems fine for that, but there is different twist: when I generate the CHM from Roboehlp and then click "View Result" everything works wonderfully. The problem is that as soon as I close that CHM, the browse sequences and glossary disappear. That is, I generate abc.CHM to C:\folderA and although everything is in place when I click View Result in Robohelp, if I later go to C:\folderA and open the same file, it has a grayed out glossary tab and missing browse sequences. And, not surprisingly I guess, if I send the CHM to someone else they get the same glossary-&-broswe-sequence-free result.
I have looked over many forum disucssions on grayed out glossary tabs and missing browse sequences, but nothing seems to explain my particular issue. It leaves me scratching my head quite a bit.
Any ideas?
Thanks in advance :-)

Hi there
Likely you need the 64 bit version of the HHActiveX.dll. I believe this is only available in RoboHelp HTML version 9.
If you have version 9 I received this from a Question I asked of Adobe:
...you can get the 64 bit version of HHActiveX.dll in RoboHelp 9.0. It is kept at "<RoboHelp 9.0 install folder>\Redist\x64\HHActiveX.dll"
If RoboHelp 9.0 is installed on your machine, this activeX control is already registered. Otherwise you need to register this DLL.
To register HHActiveX.dll,
1> Run Command prompt(cmd.exe) as administrator
2> Type "regsvr32 <HHActiveX.dll full path>" and press Enter.
3> This should show that the registration is done successfully.
Now working with 64 bit version of HH.exe should also show Glossary and Browse Sequences.
You might download version 9 and test.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Diference between view controler and navigation controler

Hello,
please what is the diference between view controler and navigation controler.
Thank you for your answer

a Navigation Controller is a Subclass of a View Controller. It has some additional Functionality. Please read the Apple Documentation for further information
https://developer.apple.com/library/ios/#DOCUMENTATION/UIKit/Reference/UINavigat ionController_Class/Reference/Reference.html
https://developer.apple.com/library/ios/#DOCUMENTATION/UIKit/Reference/UIViewCon troller_Class/Reference/Reference.html

Firefox tab and navigation tab colors

I'm using firefox 4 is there a way to remove the ugly opaque tabs and I want to change the navigation tab colors to red. Can I do that? If so, how?

Hi Sean,
Try this:
# Type about:config in the address bar
# Click ''I'll be careful, I promise'' if prompted
# In the Filter input field type ''startup''
# Double click on startup.homepage_override_url
# Delete the text string and click ''OK''
# Close Firefox and reopen the window to verify that it has worked.
It's a bit more "technical" than most people want, but it should work.

Multi-Tab Canvas Navigational Controls

I want to control navigation out of a block displayed on a "tab" canvas to other "tabs" in a form containing multiple tab canvases. Are ther any "events triggers" associated with the "tab" level similar to the "WHEN_BUTTON_PRESSED" trigger such as "WHEN_TAB_SELECTED"?
I assume I must place the triggers on the block (or blocks) associated with the respective tabbed canvases.
null

The trigger must be placed at the form level. Use "if :system.cursor_block = 'BLK'"
to code for each tab.

Pages and icons (in the tabs and navigation bars) are too big due to 22 upgrade

Due to FF22 upgrade (from 21), all my icons (from webpages, addons and regular buttons) and tabs have got bigger and that's really ugly because of the low resolution of the images. Also considering I have a rather big number of tabs I can just see a smaller number of them and it's annoying.
The zoom of the page is now bigger (given that I has already zoom in in version 21, now the pages are too big and I have to zoom out a page that was correctly zoomed in 21)
Surprisingly the menu bar is intact !
Is that a new graphic convention ? Is there an update of something like GTK+ in this new version that could be responsible of this bug ? And mainly is there anyway to fix it ?
My screen resolution is 1920*1080. And for example with chromium or FF21 the menu have the perfect size.
PS: Sorry for my poor English.

All these confusing explanations on how to fix something that never should have been changed. It just pisses me off that I now have to get used to inferior graphics because someone thought it would be cool to screw with settings people have obviously been using for who knows how long. I have tried simply zooming down and that doesn't work. I am not going to enter a bunch of techie gobbledeegook and screw up my whole internet experience. I am just PISSED!!!!
How about another version to correct this? Hey, if someone wants to stay with this one, fine. At least give us people who aren't tech wizards an option to stick with what we have and what we have been happy with for years. Now, excuse me.. I need to get away from this.. I am so f***king pissed!!!
30 minutes later: Okay, I went to about:config and a window came up .. pretty much telling me my computer would blow sky high and take me with it. I'm just an old lady who WAS passing my time browsing and playing a few games. Oops, I'm getting mad again. PS I NEVER talk like this, but this has ruined my whole fricken day.
15 minutes later: I decided to give up. I went to play some monopoly at my favorite game site and the pop up window with the game board was unplayable. The board was way down the window and not complete. So, I went back and despite all the warnings went back to Version 21. I have used Firefox for years and have sworn by it and defended it and given it my best reviews. up until now. I absolutely don't want to quit FF, but I don't know all the tech stuff, I guess is required to change formats back to what you are used to. I still can't believe FF would make a drastic change across the board without warning or giving a choice. If I didn't know how to downgrade, I wouldn't be able to use my PC to help me get through each day. Why why why?

Glossary tab doesn't display and Glossary pop ups don't work

TCS 3.5 (FrameMaker 10, RoboHelp HTML, version 9)
Windows XP version 5.1 sp3
Internet Explorer 8.0
My apologizes if this should be in a different forum. Also, from searching I have found that the problem is usually that the DLL has not been loaded -- I have done that. So I am at a loss. Thanks in advance for your help!
Problem: My .chm output does not have a Glossary tab and the Glossary text pop-ups in my topics do not work.
Background: Since I am new to TCS 3.5 I'm going to give my entire process. Quite frankly I'm not even sure if my entire process is correct.
Steps:
Before I began: I loaded the HHActiveX.dll. Here's the proof:
Create a blank project.
Import master page (File > Import > Master Page).
Load project settings (File > Project Settings > Import).
Link FrameMaker Book (File > Link > FrameMaker Document)
Configure Properties (Right-click the book file in RH and click Properties).
In Properties, select Convert FrameMaker Table of Contents and give a name.
In Properties, select Convert Glossary and give a name.
In Project Manager pod, right-click the Glossary topic (System Management GLO) and click Set as Default.
Update Project (File > Update > Update All).
Run Glossary Hotspot Wizard (when running wizard, select the glossary topic that was set as default in step 8)
Edit the UpdateMarkedGlossaryTerms.jsx script (change the GlossaryName variable to the Glossary topic created in step 8 and change the GlossaryStyle variable to TextPopUp)
Run Update Marked Glossary Terms script (In Script Explorer pod, right-click the UpdateMarkedGlossaryTerms.jsx script and click Run).
Run graphicinreferencepages.jsx script (this inserts my note graphics from FM reference pages)
Configure Microsoft HTML Help layout. Here's the properties file:
16. In the properties file I selected the Glossary topic that I had set as my default in step 8.
17. Click Save and generate.
Result: In the .chm file (and in View Selected Item in RH) when I click a glossary term in a topic, I get "This program cannot display the webpage". Also, the Glossary tab is not displayed.

Welcome to our community, Linda
In RoboHelp, if you open the Glossary pod (View > Pods > Glossary > Select Glossary) do you see terms and definitions listed there?
If not, that would explain it as the Glossary has no entries.
Assuming it does have entries, you may simply need to enable the tab by clicking View > Pods > Project Set-up. Expanding the Windows section in the pod and double-clicking your CHM window.
A CHM window looks like this:
If you don't see a CHM window, you will need to create one. If you do see a CHM window, double-click it. Then ensure the Glossary is enabled.
Keep us posted! Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

After moving and resizing control, some controls don't redraw properly as the cursor passes over them.

I have a top-level VI with three panes (two splitters). One of the panes contains nested tab controls. One of the tab pages contains six XY-graphs, a table and some decorations.
I use a subVI to resize and relocate the tabs and contained controls. All this is working fine, and everything looks fine after the resizing is complete.
The problem is when the cursor passes over certain controls (the chart legends and the table column headers for example), they redraw with gray boxes. The problem only occurs after enlarging the window from its minimum size. It goes away if the window is resized back down to minimum.
Anything that causes the window to redraw, like another resize or minimize/restore, properly refreshes the screen.
Has anyone seen this problem, and have a workaround?
The problem exists in development environment or built in LV 9.01 or LV 2010.
Thanks!
Matt Dennie
Attachments:
Resize Redraw Problem.zip ‏125 KB
Resize Redraw Problem.JPG ‏210 KB

Thanks again for taking a look at my problem.
force redraw - This is apparently only available in LV2010. I did give at a try, but it did not prevent the problem, nor did it correct the problem once the gray boxes appeared.
disable updates (on a graph) - This apparently only applies to 3-D graphs, which is not what I am using in this case.
disable front panel updates - I tried disabling updates before moving/resizing the front panel controls, then re-enabling updates afterwards. The problem is exactly the same as before. Once the move/resize is complete, passing the mouse over the table column headers or the graph plot legend results in the gray boxes.
I would appreciate any other suggestions you may have.
Again... the problem is not that the moving and resizing don't work. They work fine. But once the resizing is complete, passing the mouse over the legend or table column headers causes gray boxes to appear.
Thanks!
-- Matt

When I open another Tab and type in a website address, after the site loads the URL in the navigation bar disappears. Why?

When I open a new tab and type in the website url, after the website loads the website url disappears. In order for me to get it to come back, I have to right click on the navigation bar and click undo. why is this?

Did this happen immediately after the reset or at a later time?
Does this only happen on a new tab?
What is the current setting for the new tab page as set via the browser.newtab.url pref?
You can open the <b>about:config</b> page via the location bar.
*http://kb.mozillazine.org/about:config
Rename or delete the prefs.js file and possible numbered prefs-##.js and user.js files to reset all prefs to the default value.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences

Adding tabs dynamically at runtime for a tab navigator control

Hi,
Is it possible in flex builder 2 to dynamically add the tabs
at runtime to the tab navigator control, if we can add plz tell the
procedure to do that
thanks in advance

Given that you had a tab navigator declared in mxml like
this:
<mx:TabNavigator id="myTabber" selectedIndex="0">
</mx:TabNavigator>
you should just be able to call the addChild method, passing
the child tab containers. So for example, in some ActionScript
event handler:
var newTab:Canvas = new Canvas();
myTabber.addChild(newTab);
bear in mind I haven't done this by adding tabs, but have
done tons with adding controls to an application at runtime using
this method (DataGrids, Grid, GridItems, etc...)
Jason

Ssis data flow item and ssis control flow item tab missing in choose toolbox item from ssdt 2010

ssis data flow item and ssis control flow item tab missing in choose toolbox item from ssdt 2010

I have the same problem.
When i click on tools -> choose tools Items dialog box, Control Flow and Data Flow Tab are missing.
I've just worked with SQL Server Data Tools and SQL Server 2012 and these tabs are not missing.
i think this is a problem installing SQL Server.
I've not yet found a solution.

Is it possible to have the Navigation Toolbar (or at least the pop-up Location Bar) show automatically when I open a (blank) new tab and be automatically hidden once I select an address/search?

I'm obviously aware of the possibility to show/hide the Navitation Toolbar manually, but I'd like to have it done automatically to get the best of screen space and navigation ease.

Thanks cor-el! I had tried that out, but was turned off by the different workflow (can't click Tab to select the address suggestions) and assumed by the look that I couldn't use my Smart Keywords for searches.
In fact, the workflow isn't that much bulkier and the Location Bar is fully functional:
* ''for a search: Ctrl+L, (Smart Keyword +) [search terms], Enter''
* ''for a suggested address: Ctrl+L, Down, Enter, Enter''
Still, it would be nice in future versions if:
# the Location Bar could automatically open when opening a (blank) new tab (just as the cursor automatically goes to the Location Bar when a new tab is opened with the Navigation Toolbar showing) to avoid the Ctrl+L step of the workflow
# the Tab, Enter workflow could be enabled for selecting address suggestions in the pop-up Location Bar
Or (most simply in my mind):
if '''the Navigation Toolbar could be set to show when a (blank) new tab is opened and disappear once an address/search is selected'''.

Tab and control buttons do not work in Firefox (they work in other browsers) AND I switched to a new keyboard.

The tab and control buttons are not working the Firefox browser (My browser is up-to-date). The buttons work in IE and Chrome, however, before I realized that, I even switched out my keyboard to a brand new one hoping it would solve the issue.

Thank you--there were a few random extensions I had not added (spyware, maybe?). Once I removed those the issue was fixed!

Controling the PM ORDER tabs and subscreen

Hello
We are trying to customize PM ORDER.
We looked for a way in which we could control the appearance of tabs and subscreens in customization and found none.
We found that ther is a BADI IWO1_SCREEN_MODIF that seems to be for that purpose.
Is it the only way or there is a way like when customizing notification.
Second question is about the notification fields when creating a PM ORDER that creates a notification. We have not found any way of controling the tabs and subscreens.
Best regards
Shlomo Assouline

Hi Shlomo Assouline,
GuiXT is a SAP Partner software integrated with Standard SAP.
This helps in Changing the Field names, Location, Screen Layout etc with out any program and with simple syntax.
It gives amazing results if done properly. It has a big drawback too. It is PC specific & cannot be controlled based on who logins etc. But if you want same screen through out your Business the small TXT file created can be copied into other PC (personal Computer) as well.
For detailed information on this see the link www.synactive.net. It has some Tutorials too there.
The path in SAP to activate it is Click on "Customise Local Layout" the button adjacent to Help button after you logon.
Under that you will see "Activate GuiXT". From there on you can proceed. When you do not require switch it off as it is Toggle Button.
Regards,
MLN Prasad

Tab and option settings

i am baffled by sudden difficulty setting tabs options so windows display correctly, and i don't understand any of the article explanations. I've noticed from using POGO that suddenly when trying to open a game table in spades, the table window is not opening in a pop up window for just the game table... instead it is opening on my browser window as an added tab. This has made using pogo features extremely difficult, and i don't understand how what I assumed was just a java applet pop up has suddenly become executed as a new browsing tab.
I am anything but a geek, and have struggled since losing Windows XP . By my grasp of computers, none of the new database or software instructions are written so they can be understood. by this user. Either Mozilla or Windows 7 seems to change feature or options settings without my awareness that the option has been changed.
The problem specifically now, is opening up a game table window used to open without browsing tab features, and that was simpler. now the new table request is opening as a tab on a browser window and that is just completly handicapping the ability to use the pogo website. I've looked at tools options for tabs and don't understand how any of the choices relate to this navigation problem i'm having with using the pogo site
... please help.

I have corrected all my plug ins and add ons and extensions in firefox. I've gone to control panel and uninstalled duplicates. I've updated all JRE and Java and Shockwave and Flash applications. Mozilla tells me all my add ons exgtensions etc are up to date now. Pogo STILL WILL NOT LOAD A GAME TABLE ANYPLACE BUT IN A BROWSER WINDOW. POGO IS STILL MESSED UP AND I WISH ALL THEIR PROGRAMMING EFFORTS WOULD JUST IMPLODE. THEY ARE THE MOST DISRUPTIVE WEBSITE ON THE WEB. NONE OF THEIR MAINTENANCE AND PROGRAMMAING EVER WORKS CORRECTLY AND ALWAYS CORRECTS MONTHS OF INCORRECT PROCESSING AND JUST PLAIN JUNKY COMPUTER COMMAND/ APPLICATION ACTIVITY. I ALSO THINK WHAT POGO DOES OFTEN CREATES PROGRAMMING BUGS FOR OTHER APPLICATIONS, LIKE CAUSING JAVA AND SHOCKWAVE TO NOT LOAD OR EXECUTE CORRECTL,Y.
DOES ANYONE AT POGO KNOW WHAT THEY ARE DOING?

Glossary Tab and Navigation Controls

Similar Messages

Maybe you are looking for