Glow Effect Severely Slows Saving Process

In my Illustrator file, I created a large oval with an inner glow. This object is really slow to move, and makes the file take about 10 minutes to save. Is there any way I can keep the object and have the file save more quickly?

Thanks! I created a duplicate file and lowered it to 72dpi and now working smoothly. Will I be able to change it back to 300dpi for printing, without detrimental effects?

Similar Messages

Photoshop 6 - slow saving process to server

Suddenly, after working with Photoshop 6 a few weeks, it takes 2-5 minutes to save a photoshop document to our server. Saving the file directly to the desktop just takes a second. The files are not heavy, only 60-100 mb.
I´m not 100% sure, but I think this problem started when I updated the OSX two weeks ago....
My computer:
MacBook Pro Retina
Processor 2,6 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 1024 MB
Software OS X 10.8.2 (12C3006)
/Nina

Chris didn't say it, but Adobe does not support your trying to write files directly from Photoshop to your server. No way, no how.
http://helpx.adobe.com/photoshop/kb/networks-removable-media-photoshop-cs5.html#main-pars_ heading_3
The pertinent paragraph:
If you use Photoshop CS6, CS5, or CS4 without Creative Suite, Technical Support strongly recommends working in Photoshop directly on the local hard disk. To prevent data loss, save files to your hard disk first. Then transfer them to the network or removable drive in the Finder or in Windows Explorer. To retrieve files, copy them in the Finder or in Windows Explorer from the network or removable drive to your hard disk. You can then open the files in Photoshop. This workflow avoids problems that occur when network system setups or removable media device drivers are incompatible with the operating system or Photoshop.
As you can see, they suggest copying the file to your local system, saving locally, then using the OS to copy it back. This also has the advantage that if you do something unexpected to a file the original is still there on the server.
-Noel

Recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of

recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of images I usually take on a weekly basis. I bought a new faster laptop but when I looked for the cd with the software and serial I could not find it in the Xmas clutter. I downloaded a trial version of lightroom and got it working on my new laptop. Is there a way to access the serial number from my previously installed version and insert it into the trail version to make it work for me?
Myron

Mea culpa
While i registered all my cs2 thru 6 versions and my lightroom 2 thru 4 versions and recorded the serials and saved the adobe registration emails. Since this came as a freebee with the camera i neglected this vital step. I have the instslled version on my old laptop but want to install it on my new one. Thanks to Jim Hess I got the serial so all is well in my world and I will register it with ADOBE
Myron

Hangs, severe slowness and lock-ups running Firefox 27.0 / 28.0 on Windows XP / Is it possible to block plug-in container?

Been experiencing severe slowness and lock-ups with Firefox of late, which ends with a sudden drop in memory usage and me having to repeatedly shut it down through Task Manager. I have created a new profile and disabled hardware acceleration. I have tried disabling all plug-ins and extensions, yet I noticed that at times (not always) plug-in container was still an active process, which I don't understand. Why would it be active when there are no enabled plug-ins? I also noticed that when plug-in container is not active (showing under Processes in Task Manager) I do not have this problem and Firefox runs normally? I need to block plug-in container. Please help.

I have just tried on Windows 7 and used process explorer on that. I would expect the results to be displayed in a similar manner on Windows XP.
Plugin-container is shown as being run from Firefox, and in turn if I mouse over or left click the line for plugin-container .exe then under ''command line'' it tells me what is running, in my case at this instance it is Flashplayer and so it displays
.... \Macromed\Flash\NPSWF32_12_0_0_77.dll .... plugin ....
It is identifying it is FlashPlayer
The worry with your apparently unknown operation is that within the plugin-container it may be safe but if plugin-container is disabled maybe it could be malware and cause a problem.

Installation of Yosemite 10.10.1 has severely slowed the performance of my Mac. Takes a long time to start-up and to load any apps. Any suggestions?

Installation of Yosemite 10.10.1 has severely slowed performance of my Mac Mini. Tales a long time to start, and a very long time to start any apps.

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

CS6 very slow saving large files

I have recently moved from PS CS5 to CS6 and have noticed what seems to be an increase in the amount of time it takes to save large files. At the moment I am working with a roughly 8GB .psb and to do a save takes about 20 minutes. For this reason I have had to disable the new autosave features, otherwise it just takes far too long.
CS5 managed to save larger files, more quickly and with less memory available to it. Looking at system resources while Photoshop is trying to save, it is not using its full allocation of RAM specified in performance preferences and there is still space free on the primary scratch disc. The processor is barely being used and disc activity is minimal (Photoshop might be writing at 4mb/s max, often not at all though according to Windows).
I am finding the new layer filtering system invaluable so would rather not go back to CS5. Is this is a known issue or is there something I can do to speed up the saving process?
Thanks.

Thanks for the quick replies.
Noel: I did actually experiment with turing off 'maximize compatibility' and compression and it had both good and bad effects. On the plus side it did reduce the save time somewhat, to somewhere a little over 10 minutes. However it also had the effect of gobbling up ever more RAM while saving, only leaving me with a few hundred mb's during the save process. This is odd in itself as it actually used up more RAM than I had allocated in the preferences. The resulting file was also huge, almost 35 GB. Although total HD space isn't a problem, for backing up externally and sharing with others this would make things a real headache.
Curt: I have the latest video driver and keep it as up to date as possible.
Trevor: I am not saving to the same drive as the scratch dics, although my primary scratch disc does hold the OS as well (it's my only SSD). The secondary scratch disc is a normal mechanical drive, entirely separate from where the actual file is held. If during the save process my primary scratch disc was entirely filled I would be concerned that that was an issue, but it's not.
Noel: I have 48 GB with Photoshop allowed access to about 44 of that. FYI my CPU's are dual Xeon X5660's and during the save process Photoshop isn't even using 1 full core i.e. less than 4% CPU time.

FCP doesn't render Livetype glow effect.

I've created a neon-like glow effect on a title in Livetype. I've imported the project and a .mov into FCP. When I open the file in the browser, I can still see the effect. But as soon as FCP renders it, the glow effect disappears! I've tried changing the render settings to RGB and high precision YUV and it still doen't work. I've also tried exporting this tilte with different settings from Livetype. But the effect is always visible in the viewer and not in the sequence.
Does anyone know what's going on?
Thanks in advance.

As a footnote, I'll add that once I applied some of the titles I created with no background to the image backgrounds on my timeline, the glow effect didn't look right either. So I went back to Livetype and imported the "background movies" I exported from FCP and placed them under the titles in Livetype. This way the glow effect looked just right once I saved it in Livetype and rendered it inside FCP!
So, I guess the workflow was my major mistake...

Glow effect on button roll-over

I am wanting to have my transparent button disply a glow effect outline when the mouse is rolled over the button. Is this possible and if so, how do I go about it?

Thanks.
I have been looking for various solutions on "Da' Google" and it seems most involve perhaps a bit more expertise than I can lay claim to having. I have seen several which involve writing code of some sort. I am a fair hand at following instructions, so long as they begin at a reference point I can identify.

PhotoBooth Glow effect in iMovie?

What might be the best way to get the PhotoBooth Glow effect in iMovie? PhotoBooth video is incredibly jerky... like maybe one sample per second or something like that. I do want to use the iSight camera built into my MacBook Pro, but wanted smoother video if possible.

Thanks for the star, Steve
Perhaps a more detailed explanation will my suggestion clearer for you.
The alternatives I suggested do not replicate Photo Booth's one-step "Glow" effect recording. Rather, they give you the power to create or simulate them in multiple operations. If they replicated Photo Booth's "Glow" they would likely give the same jerkiness that you are trying to avoid.
Considerable processor power is required to apply and render the effects that make up Photo Booth's "Glow" in real time while video is being captured and recorded. I believe that is why more complex effects like "Glow" cause jerky recording on your MacBook Pro. I do not have an 8-core Mac Pro to test, but my guess is that one of the new, fast 8-core Mac Pros could record Photo Booth's "Glow" smoother than your MacBook Pro does. However, if you only have access to your MBP, the only way I can think of to get a less jerky video that "glows" is to separate recording from rendering the effects.
Macs uses QuickTime file formats everywhere, so there is no mystery in the Photo Booth / iChat commonality. In fact, as explained in Changing the backdrop of a video chat in iChat 4.0 Help on your Mac, iChat can use any image or QuickTime movie, not only those created by Photo Booth (using QuickTime formats), as a custom backdrop.
Photo Booth's "effects" are simply some saved setting "recipes" that use combinations of operations that include some of your Mac's Core Video settings. As explained in the "creating your own "glow" filter" link I provided in your other thread, you can create effects for yourself. However, using this method adds processor workload, so I doubt that creating your own effects would smooth the jerky recordings that you have encountered.
Instead, I suggest that you use iMovie to (1) first record the movie clip, and (2) then add effects one at a time to approximate the look you want while keeping the smoothness of an iMovie recording.
Because these effects use combinations of your Mac's inbuilt Core Video effects, you should be able to approximate the Photo Booth "Glow" that you like by applying combinations of some of iMovie's "Video FX". To simulate the Photo Booth "Glow" effect on an iMovie video clup, some experimentation will be needed to decide which effects to use and where to set the various sliders for those effects.
I started by recording a short video clip in iMovie. Next, I applied maximum "Bloom" effect to the test clip. After "Bloom" rendering was completed, I experimented with the "Brightness & Contrast" settings for the rendered clip. By increasing the Contrast and decreasing the Brightness sliders, I got a smooth video image that I think looks similar to my jerky Photo Booth recording with the "Glow" effect. I finished the simulation by setting the appropriate slider position for the "Peephole" effect. I know that this simulation is not merely a smooth version of the jerky Photo Booth "Glow" video clip. However, it is a smooth recording, and it seems to me to approximates the look of my jerky Photo Booth "Glow" clip. If the same "recipe" does not produce a video that looks like you want, even if you cannot create an exact match, you should be able to come closer with additional experimentation.
I have learned much about iMovie's capability from Karsten, who I consider to be one of the iMovie HD gurus. He has done some amazing things with iMovie HD. If he gives you different advice here, try his first.
Cheers,
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

How can i apply this glowing effect in logo with illustrator?

How can i apply this glowing effect in logo | ThemeForest Community Forums

I would make several copies of the original artwork. On each copy, section the individual areas to be gradients. It looks like you have at least four gradients, both linear and radial. It's just a matter of building each section and then reassembling each. Not too complex, yet nice piece of artwork.

How to export animated gif with transparent background and glow effect?

I've been having issues lately with creating animated gifs in flash. I finally figured out a way to export a gif with a transparent background but I'm now having an issue with it again because I'm using a glow effect. When the gif is exported the glow effect changes into a very poor quality and becomes less of a glow and more like a solid color. I've even exported a png sequence from flash and put it into photoshop then created a gif from there but I'm still having the same issue. Is there anyway I can properly export this in gif form so the quality is the same as when I test it in flash?
I've provided an image of what my issue looks like and the settings (I've messed around with the settings and this is the best I can come up with) . This is in photoshop but the result is similar in flash. The left one is what it originally looks like and the right is what it will look like after exporting. As you can see as I said before the glow changes into more of a solid color kind of like a border. Any help would be greatly appreciated, thanks in advance!

A GIF is limited to 256 colors while a glow effect likely wants to tie up thousands (let's just say 'lots') of variations of tone.

How do you add outer glow effect to text in Elements 12?

I've created a layer in Elements 12 that contains some text. I'd like to add an outer glow effect.
This is what I am doing:
1. Select layer with text
2. Click FX button at bottom of screen
3. Click Styles tab
4. Select Outer Glow from drop down
5. I can see 11 preset option. The only one that works is called 'Fire' and it is not the style I'm looking for. I want a simple outline, but none of the other presets have any effect.
Any help would be appreciated!! Thanks!
Jeff

jeffreys42057005 wrote:
I've created a layer in Elements 12 that contains some text. I'd like to add an outer glow effect.
This is what I am doing:
1. Select layer with text
2. Click FX button at bottom of screen
3. Click Styles tab
4. Select Outer Glow from drop down
5. I can see 11 preset option. The only one that works is called 'Fire' and it is not the style I'm looking for. I want a simple outline, but none of the other presets have any effect.
Any help would be appreciated!! Thanks!
Jeff
Jeff,.
You're almost there!
Try #4 Outer Glow>Simple. Apply.
Now on the text layer in the layers palette, there is an f on the right. Double click on the f
This brings up the Style settings dialog. At the bottom, check "Stroke", and adjust with the sliders to suit.

After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Titles lose glow effect in Final Cut Pro X

Im using Final Cut Pro X and when I create a title with the glow feature after a while of editing the feature turns off and you can't make the title glow anymore without creating a new one. Still after you make a new one soon the glow effects eventually turns off but it says it's on.
The project im working on is an hour long. Also it's had one other glitch where in three clips one to two frames go blank. After I added titles to the clips the frames went back to normal and the others that i didnt want text I added blank titles to fix the frames. Any advise on what I should do?

In the Timeline position your Playhead at the starting position.
In the Viewport position the Shape Mask at the starting position.
In the Inspector click the Add Keyframe button.
Press Control-V to open the Animation Editor to see your keyframes.
Move the Playhead and the Shape Mask to a new position.
In the Inspector click the Add Keyframe button.
Continue adding keyframes until you have defined the Shape Mask’s movement.
Regards
Nolan

Colors are incorrect in Alpha Glow effect?

I started a brand new project and added a title to it, using standard white text.
I then dragged it to my timeline and gave it an Alpha Glow effect.
The default alpha-glow start and end colors are grey, yet they are showing up as yellow in the preview window.
Furthermore, when I change the color using the eye-dropper tool or manually setting them, they are mostly incorrect. The color in the box is NOT the same as the color that is appearing in the preview window.
Does anyone know what might be causing this?
Kevin.

In addition to the colors being incorrect, I also noticed that when I press "play" on the timeline, the glow "snaps" and expands to about 25% larger than it is in the preview window.
Something really strange is going on with this effect.
Can anyone help me?
Kevin.

Glow Effect Severely Slows Saving Process

Similar Messages

Maybe you are looking for